Commit Graph

48 Commits

Author SHA1 Message Date
Dan Carpenter 7c0b2380da mfd: ab8500-debugfs: Move dereference after check for NULL
We dereference "desc" before check if it is NULL. I've shifted it
around so we check first before dereferencing.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-06 09:13:17 +00:00
Lee Jones d551c4c43c mfd: ab8500-debugfs: Apply a check for -ENOMEM after allocating memory for event name
The AB8500 debugfs driver allocates memory to contain the name of a new sysfs
entry, but fails to apply the proper post-allocation checks. If the device
were to run out of memory, the allocation would return NULL. Without the
correct checks the driver will continue to populate address NULL with the
specified device name which would obviously cause a pointer dereference Oops.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-09-02 10:22:44 +01:00
Lee Jones f840e23bcf mfd: ab8500-debugfs: Apply a check for -ENOMEM after allocating memory for sysfs
The AB8500 debugfs driver allocates memory for a new sysfs entry, but
fails to apply the proper post-allocation checks. If the device were to
run out of memory, the allocation would return NULL. Without the correct
checks the driver will continue to populate NULL->[show|store|...],
which would obviously cause a pointer dereference Oops.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-09-02 10:22:42 +01:00
Sachin Kamat 8455eaee41 mfd: ab8500-debugfs: Staticize local variables
Local variables referenced only in this file are made static.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-09-02 10:22:33 +01:00
Lee Jones c18cf6d1b0 mfd: ab8500-debug: Convert to managed resources for allocating memory
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-13 12:11:40 +02:00
Jingoo Han 8420a24138 mfd: Replace strict_strtoul() with kstrtoul() in ab* and att*
The usage of strict_strtoul() is not preferred, because
strict_strtoul() is obsolete. Thus, kstrtoul() should be
used.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-06-13 10:51:56 +01:00
Linus Walleij 6999181eec mfd: ab8500: Pass AB8500 IRQ to debugfs code by resource
The AB8500 debug code which was merged in parallell with the
multiplatform work incidentally introduced a new instance using
the <mach/irqs.h> header which is now deleted, causing this
build regression:

drivers/mfd/ab8500-debugfs.c:95:23:
fatal error: mach/irqs.h: No such file or directory
compilation terminated.
make[4]: *** [drivers/mfd/ab8500-debugfs.o] Error 1

The code most certainly never worked with device tree either
since that does not rely on this kind of hard-coded interrupt
numbers.

Fix the problem at the root by passing it as a named resource
from the ab8500-core driver. Use an untyped resource to
stop the MFD core from remapping this IRQ relative to the
AB8500 irqdomain.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-05-17 00:42:31 +02:00
Lee Jones 9f9ba15f74 mfd: ab8500-debugfs: Trivially beautify the debugfs driver
Just lots of white space corrections, changing some of the 4 space
tabs to 8 and pulling back some of the double tabbing back into
singles, such as the remaining of the driver.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07 12:29:36 +08:00
srinidhi kasagar 7b830ae4e5 mfd: ab8500-debug: Convert to kstrtoul_from_user
Use kstrtoul_from_user for getting an unsigned long from userspace
which is less error prone.

Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07 12:29:26 +08:00
Linus Walleij eb1f95872a mfd: ab8500-debug: Add explicit dependencies
As I am working on SPARSE_IRQ a number of implicit resource
grabs in the kernel become evident. For example, some includes
like <linux/irqs.h> would implicitly include <mach/irqs.h>
and then from there <mach/db8500-regs.h>.

In many cases it is masking the fact that drivers do not
properly use resources to pass their dependencies, base
addresses etc. So write explicit #include statements with
TODO items to have this fixed the proper way to all drivers
doing this.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07 12:29:20 +08:00
Lee Jones 971480f520 mfd: ab8500-debug: Add register map for ab8540.
Required to read out correct debug information from the AB chip.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07 12:29:10 +08:00
Lee Jones f38487f22d mfd: ab8500-debugfs: Change AB8500 debug permissions
Enable group write permissions for ab8500 debug MFD driver.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07 12:29:05 +08:00
Lee Jones 127629d74e mfd: ab8500-debug: Add ADC input channel usb_id in debugfs
Signed-off-by: Yang QU <yang.qu@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Alexandre BOURDIOL <alexandre.bourdiol@stericsson.com>
Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07 12:28:55 +08:00
Lee Jones c7ebaee292 mfd: ab8500-debugfs: Dump sim registers
This patch allows to dump the SIM registers from debugfs. It will
temporary change the config to allow APE side to read the SIM registers.
Note that this read can cause problem on modem side since the modem
can't read these registers while the operation is ongoing.

Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07 12:28:50 +08:00
Lee Jones bc6b4132bc mfd: ab8500-debug: Add support for the AB8540
Allow GPADC debug information to be shown when executing on an AB8540
based platform.

Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@stericsson.com>
Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com>
Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07 12:28:28 +08:00
Lee Jones 9581ae39de mfd: ab8500-debug: Add support for ab8505 and ab9540
Make it possible to dump all registers in ab8505 and ab9540.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07 12:28:12 +08:00
Lee Jones e436ddff57 mfd: ab8500-debugfs: Add tests for ab8540 based platform initialisations
Signed-off-by: Alexandre Torgue <alexandre.torgue@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com>
Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
Tested-by: Maxime COQUELIN <maxime.coquelin@stericsson.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07 12:28:06 +08:00
Jonas Aaberg 2cf64e2648 mfd: ab8500-debug: Add wake-up info
Add information regarding what ab interrupt that caused
a wake-up from suspend in <debugfs>/ab8500/interrupts.
Also print the name of the interrupts, not just the numbers.

Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Per FORLIN <per.forlin@stericsson.com>
Tested-by: Mattias WALLIN <mattias.wallin@stericsson.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07 12:27:57 +08:00
Jonas Aaberg 222460cb4b mfd: ab8500-debug: Better error handling on crash
Stop trying to read i2c registers if one fail.

Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07 12:27:52 +08:00
Lee Jones 5ff9090f3d mfd: ab8500-debug: Function to save all ABB registers to mem
Dump function that stores all readable ABB registers to a memory
areas where they can be accessed from dump file.

Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07 12:27:31 +08:00
Mattias Wallin cfc0849c66 mfd: ab8500-debug: Print banks in hex
This patch changes bank prints to use hex value.

Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com>
Reviewed-by: Daniel WILLERUD <daniel.willerud@stericsson.com>
Tested-by: Jonas ABERG <jonas.aberg@stericsson.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07 12:27:25 +08:00
Lee Jones 7348234625 mfd: ab8500-gpadc: Add gpadc hw conversion
Add the support of gpacd hw conversion and make the number of
sample configurable.

Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07 12:27:14 +08:00
Linus Walleij 0cd5b6d08c mfd: ab8500: Fix compile error
When compiling the AB8500 core driver in the latest
MFD tree the following happens:

  CC      drivers/mfd/ab8500-debugfs.o
/home/elinwal/linux-next/drivers/mfd/ab8500-debugfs.c:157:3: error: 'AB8500_SYS_CTRL1_BLOCK' undeclared here (not in a function)
/home/elinwal/linux-next/drivers/mfd/ab8500-debugfs.c:157:2: error: array index in initializer not of integer type
/home/elinwal/linux-next/drivers/mfd/ab8500-debugfs.c:157:2: error: (near initialization for 'debug_ranges')
(...)

This is due to a missing include statement, so fix
it up.

Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14 00:24:07 +01:00
Philippe Langlais 8908c04985 mfd: ab8500-gpadc: Use new ab8500_gpadc_get() with name parameter
The new format of ab8500_gpadc_get() accepts a device name as a
parameter to specify which device to retrieve. This patch
enforces the use of that new format.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
2013-02-04 08:33:30 +00:00
Ashok G 70bad04f2a mfd: ab8500-debugfs: sizeof() mismatch bugfix
Simple pointer error fix to obtain the expected sizeof() result.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Ashok G <ashok.g@stericsson.com>
Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
2013-02-04 08:33:26 +00:00