Commit 4675ff05de ("kmemcheck: rip it out") has removed the code but
for some reason SPDX header stayed in place. This looks like a rebase
mistake in the mmotm tree or the merge mistake. Let's drop those
leftovers as well.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull networking fixes from David Miller:
1) CAN fixes from Martin Kelly (cancel URBs properly in all the CAN usb
drivers).
2) Revert returning -EEXIST from __dev_alloc_name() as this propagates
to userspace and broke some apps. From Johannes Berg.
3) Fix conn memory leaks and crashes in TIPC, from Jon Malloc and Cong
Wang.
4) Gianfar MAC can't do EEE so don't advertise it by default, from
Claudiu Manoil.
5) Relax strict netlink attribute validation, but emit a warning. From
David Ahern.
6) Fix regression in checksum offload of thunderx driver, from Florian
Westphal.
7) Fix UAPI bpf issues on s390, from Hendrik Brueckner.
8) New card support in iwlwifi, from Ihab Zhaika.
9) BBR congestion control bug fixes from Neal Cardwell.
10) Fix port stats in nfp driver, from Pieter Jansen van Vuuren.
11) Fix leaks in qualcomm rmnet, from Subash Abhinov Kasiviswanathan.
12) Fix DMA API handling in sh_eth driver, from Thomas Petazzoni.
13) Fix spurious netpoll warnings in bnxt_en, from Calvin Owens.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (67 commits)
net: mvpp2: fix the RSS table entry offset
tcp: evaluate packet losses upon RTT change
tcp: fix off-by-one bug in RACK
tcp: always evaluate losses in RACK upon undo
tcp: correctly test congestion state in RACK
bnxt_en: Fix sources of spurious netpoll warnings
tcp_bbr: reset long-term bandwidth sampling on loss recovery undo
tcp_bbr: reset full pipe detection on loss recovery undo
tcp_bbr: record "full bw reached" decision in new full_bw_reached bit
sfc: pass valid pointers from efx_enqueue_unwind
gianfar: Disable EEE autoneg by default
tcp: invalidate rate samples during SACK reneging
can: peak/pcie_fd: fix potential bug in restarting tx queue
can: usb_8dev: cancel urb on -EPIPE and -EPROTO
can: kvaser_usb: cancel urb on -EPIPE and -EPROTO
can: esd_usb2: cancel urb on -EPIPE and -EPROTO
can: ems_usb: cancel urb on -EPIPE and -EPROTO
can: mcba_usb: cancel urb on -EPROTO
usbnet: fix alignment for frames with no ethernet header
tcp: use current time in tcp_rcv_space_adjust()
...
Pull perf fixes from Ingo Molnar:
"This includes perf namespace support kernel side fixes, plus an
accumulated set of perf tooling fixes - including UAPI header
synchronization that should make the perf build less noisy"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
tooling/headers: Synchronize updated s390 and x86 UAPI headers
tools headers: Syncronize mman.h ABI header
tools headers: Synchronize prctl.h ABI header
tools headers: Synchronize KVM arch ABI headers
tools headers: Synchronize drm/i915_drm.h
tools headers uapi: Synchronize drm/drm.h
tools headers: Synchronize perf_event.h header
tools headers: Synchronize kernel ABI headers wrt SPDX tags
tools/headers: Synchronize kernel x86 UAPI headers
perf intel-pt: Bring instruction decoder files into line with the kernel
perf test: Fix test 21 for s390x
perf bench numa: Fixup discontiguous/sparse numa nodes
perf top: Use signal interface for SIGWINCH handler
perf top: Fix window dimensions change handling
perf: Fix header.size for namespace events
perf top: Ignore kptr_restrict when not sampling the kernel
perf record: Ignore kptr_restrict when not sampling the kernel
perf report: Ignore kptr_restrict when not sampling the kernel
perf evlist: Add helper to check if attr.exclude_kernel is set in all evsels
perf test shell: Fix test case probe libc's inet_pton on s390x
...
The new ORC unwinder breaks the build of a 64-bit kernel on a 32-bit
host. Building the kernel on a i386 or x32 host fails with:
orc_dump.c: In function 'orc_dump':
orc_dump.c:105:26: error: passing argument 2 of 'elf_getshdrnum' from incompatible pointer type [-Werror=incompatible-pointer-types]
if (elf_getshdrnum(elf, &nr_sections)) {
^
In file included from /usr/local/include/gelf.h:32:0,
from elf.h:22,
from warn.h:26,
from orc_dump.c:20:
/usr/local/include/libelf.h:304:12: note: expected 'size_t * {aka unsigned int *}' but argument is of type 'long unsigned int *'
extern int elf_getshdrnum (Elf *__elf, size_t *__dst);
^~~~~~~~~~~~~~
orc_dump.c:190:17: error: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'Elf64_Sxword {aka long long int}' [-Werror=format=]
printf("%s+%lx:", name, rela.r_addend);
~~^ ~~~~~~~~~~~~~
%llx
Fix the build failure.
Another problem is that if the user specifies HOSTCC or HOSTLD
variables, they are ignored in the objtool makefile. Change the
Makefile to respect these variables.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sven Joachim <svenjoac@gmx.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 627fce1480 ("objtool: Add ORC unwind table generation")
Link: http://lkml.kernel.org/r/19f0e64d8e07e30a7b307cd010eb780c404fe08d.1512252895.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull char/misc fixes from Greg KH:
"Here are some small misc driver fixes for 4.15-rc3 to resolve reported
issues. Specifically these are:
- binder fix for a memory leak
- vpd driver fixes for a number of reported problems
- hyperv driver fix for memory accesses where it shouldn't be.
All of these have been in linux-next for a while. There's also one
more MAINTAINERS file update that came in today to get the Android
developer's emails correct, which is also in this pull request, that
was not in linux-next, but should not be an issue"
* tag 'char-misc-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
MAINTAINERS: update Android driver maintainers.
firmware: vpd: Fix platform driver and device registration/unregistration
firmware: vpd: Tie firmware kobject to device lifetime
firmware: vpd: Destroy vpd sections in remove function
hv: kvp: Avoid reading past allocated blocks from KVP file
Drivers: hv: vmbus: Fix a rescind issue
ANDROID: binder: fix transaction leak.
Pull USB fixes from Greg KH:
"Here are a few minor USB fixes for 4.15-rc3.
The largest here is the Kconfig text and configuration changes for the
USB TypeC build options that you reported during the -rc1 merge
window. The others are all just small fixes for reported issues, as
well as some new device ids.
The most "interesting" of anything here is the usbip fixes as it seems
lots of people are starting to pay attention to that driver at the
moment. These fixes should resolve all of the reported problems as of
now.
Of course there are the usual xhci and gadget fixes as well, can't go
a pull request without those...
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits)
usb: xhci: fix panic in xhci_free_virt_devices_depth_first
xhci: Don't show incorrect WARN message about events for empty rings
usbip: fix usbip attach to find a port that matches the requested speed
usbip: Fix USB device hang due to wrong enabling of scatter-gather
uas: Always apply US_FL_NO_ATA_1X quirk to Seagate devices
usb: quirks: Add no-lpm quirk for KY-688 USB 3.1 Type-C Hub
usb: build drivers/usb/common/ when USB_SUPPORT is set
usb: hub: Cycle HUB power when initialization fails
USB: core: Add type-specific length check of BOS descriptors
usb: host: fix incorrect updating of offset
USB: ulpi: fix bus-node lookup
USB: usbfs: Filter flags passed in from user space
usb: add user selectable option for the whole USB Type-C Support
usb: f_fs: Force Reserved1=1 in OS_DESC_EXT_COMPAT
usb: gadget: core: Fix ->udc_set_speed() speed handling
usb: gadget: allow to enable legacy drivers without USB_ETH
usb: gadget: udc: renesas_usb3: fix number of the pipes
usb: gadget: don't dereference g until after it has been null checked
USB: serial: usb_debug: add new USB device id
usb: bdc: fix platform_no_drv_owner.cocci warnings
...
The regs_query_register_offset() helper function converts
register name like "%r0" to an offset of a register in user_pt_regs
It is required by the BPF prologue generator.
The user_pt_regs structure was recently added to "asm/ptrace.h".
Hence, update tools/perf/check-headers.sh to keep the header file
in sync with kernel changes.
Suggested-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-and-tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Synchronize the uapi kernel header files which solves the broken
uapi export of pt_regs. Because of arch-specific uapi headers,
extended the include path in the Makefile.
With this change, the test_verifier program compiles and runs successfully
on s390.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-and-tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Pull networking fixes from David Miller:
1) Various TCP control block fixes, including one that crashes with
SELinux, from David Ahern and Eric Dumazet.
2) Fix ACK generation in rxrpc, from David Howells.
3) ipvlan doesn't set the mark properly in the ipv4 route lookup key,
from Gao Feng.
4) SIT configuration doesn't take on the frag_off ipv4 field
configuration properly, fix from Hangbin Liu.
5) TSO can fail after device down/up on stmmac, fix from Lars Persson.
6) Various bpftool fixes (mostly in JSON handling) from Quentin Monnet.
7) Various SKB leak fixes in vhost/tun/tap (mostly observed as
performance problems). From Wei Xu.
8) mvpps's TX descriptors were not zero initialized, from Yan Markman.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (57 commits)
tcp: use IPCB instead of TCP_SKB_CB in inet_exact_dif_match()
tcp: add tcp_v4_fill_cb()/tcp_v4_restore_cb()
rxrpc: Fix the MAINTAINERS record
rxrpc: Use correct netns source in rxrpc_release_sock()
liquidio: fix incorrect indentation of assignment statement
stmmac: reset last TSO segment size after device open
ipvlan: Add the skb->mark as flow4's member to lookup route
s390/qeth: build max size GSO skbs on L2 devices
s390/qeth: fix GSO throughput regression
s390/qeth: fix thinko in IPv4 multicast address tracking
tap: free skb if flags error
tun: free skb in early errors
vhost: fix skb leak in handle_rx()
bnxt_en: Fix a variable scoping in bnxt_hwrm_do_send_msg()
bnxt_en: fix dst/src fid for vxlan encap/decap actions
bnxt_en: wildcard smac while creating tunnel decap filter
bnxt_en: Need to unconditionally shut down RoCE in bnxt_shutdown
phylink: ensure we take the link down when phylink_stop() is called
sfp: warn about modules requiring address change sequence
sfp: improve RX_LOS handling
...
Daniel Borkmann says:
====================
pull-request: bpf 2017-12-02
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix a compilation warning in xdp redirect tracepoint due to
missing bpf.h include that pulls in struct bpf_map, from Xie.
2) Limit the maximum number of attachable BPF progs for a given
perf event as long as uabi is not frozen yet. The hard upper
limit is now 64 and therefore the same as with BPF multi-prog
for cgroups. Also add related error checking for the sample
BPF loader when enabling and attaching to the perf event, from
Yonghong.
3) Specifically set the RLIMIT_MEMLOCK for the test_verifier_log
case, so that the test case can always pass and not fail in
some environments due to too low default limit, also from
Yonghong.
4) Fix up a missing license header comment for kernel/bpf/offload.c,
from Jakub.
5) Several fixes for bpftool, among others a crash on incorrect
arguments when json output is used, error message handling
fixes on unknown options and proper destruction of json writer
for some exit cases, all from Quentin.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull power management fixes from Rafael Wysocki:
- add missing module information to the Mediatek cpufreq driver module
(Jesse Chan)
- fix config dependencies for the Loongson cpufreq driver (James Hogan)
- fix two issues related to CPU offline in the cpupower utility
(Abhishek Goel).
* tag 'pm-4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: mediatek: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE
cpufreq: Add Loongson machine dependencies
cpupower : Fix cpupower working when cpu0 is offline
cpupowerutils: bench - Fix cpu online check
The default rlimit RLIMIT_MEMLOCK is 64KB. In certain cases,
e.g. in a test machine mimicking our production system, this test may
fail due to unable to charge the required memory for prog load:
# ./test_verifier_log
Test log_level 0...
ERROR: Program load returned: ret:-1/errno:1, expected ret:-1/errno:22
Changing the default rlimit RLIMIT_MEMLOCK to unlimited makes
the test always pass.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
usbip attach fails to find a free port when the device on the first port
is a USB_SPEED_SUPER device and non-super speed device is being attached.
It keeps checking the first port and returns without a match getting stuck
in a loop.
Fix it check to find the first port with matching speed.
Reported-by: Juan Zea <juan.zea@qindel.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Programs and documentation not managed by package manager are generally
installed under /usr/local/, instead of the user's home directory. In
particular, `man` is generally able to find manual pages under
`/usr/local/share/man`.
bpftool generally follows perf's example, and perf installs to home
directory. However bpftool requires root credentials, so it seems
sensible to follow the more common convention of installing files under
/usr/local instead. So, make /usr/local the default prefix for
installing the binary with `make install`, and the documentation with
`make doc-install`. Also, create /usr/local/sbin if it does not exist.
Note that the bash-completion file, however, is still installed under
/usr/share/bash-completion/completions, as the default setup for bash
does not attempt to load completion files under /usr/local/.
Reported-by: David Beckett <david.beckett@netronome.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The end-of-line character inside the string would break JSON compliance.
Remove it, `p_err()` already adds a '\n' character for plain output
anyway.
Fixes: 9a5ab8bf1d ("tools: bpftool: turn err() and info() macros into functions")
Reported-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
If `getopt_long()` meets an unknown option, it prints its own error
message to standard error output. While this does not strictly break
JSON output, it is the only case bpftool prints something to standard
error output if JSON output is required. All other errors are printed on
standard output as JSON objects, so that an external program does not
have to parse stderr.
This is changed by setting the global variable `opterr` to 0.
Furthermore, p_err() is used to reproduce the error message in a more
JSON-friendly way, so that users still get to know what the erroneous
option is.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The writer is cleaned at the end of the main function, but not if the
program exits sooner in usage(). Let's keep it clean and destroy the
writer before exiting.
Destruction and actual call to exit() are moved to another function so
that clean exit can also be performed without printing usage() hints.
Fixes: d35efba99d ("tools: bpftool: introduce --json and --pretty options")
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
If bad or unrecognised parameters are specified after JSON output is
requested, `usage()` will try to output null JSON object before the
writer is created.
To prevent this, create the writer as soon as the `--json` option is
parsed.
Fixes: 004b45c0e5 ("tools: bpftool: provide JSON output for all possible commands")
Reported-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
To pick up changes from:
2d2123bc7c ("arm64/sve: Add prctl controls for userspace vector length management")
7582e22038 ("arm64/sve: Backend logic for setting the vector length")
That showed a limitation of the regexp used in tools/perf/trace/beauty/prctl_option.sh,
that matches only PR_{SET,GET}_, but should match a few more, like
PR_MPX_*, PR_CAP_* and the one added by the above commit, PR_SVE_SET_*.
This silences this warning when building tools/perf:
Warning: Kernel ABI header at 'tools/include/uapi/linux/prctl.h' differs from latest version at 'include/uapi/linux/prctl.h'
Support for those extra prctl options should be left for the next merge
window tho.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Will Deacon <will.deacon@arm.com>
Link: https://lkml.kernel.org/n/tip-r52dsyuzy04qzqyfcifjs35t@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Michal Hocko
Linus Torvalds
Ingo Molnar
Mikulas Patocka
Hendrik Brueckner
David S. Miller
Yonghong Song
Shuah Khan
Quentin Monnet
Arnaldo Carvalho de Melo