At present, dma_buf_export() takes a series of parameters, which
makes it difficult to add any new parameters for exporters, if required.
Make it simpler by moving all these parameters into a struct, and pass
the struct * as parameter to dma_buf_export().
While at it, unite dma_buf_export_named() with dma_buf_export(), and
change all callers accordingly.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Pull fbdev updates from Tomi Valkeinen:
"Small fixes and improvements to various fbdev drivers"
* tag 'fbdev-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (24 commits)
omapdss: extend pm notifier to handle hibernation
OMAPDSS: Correct video ports description file path in DT binding doc
OMAPDSS: disable VT switch
fbdev: sh_mobile_lcdc: Fix destruction of uninitialized mutex
video: fbdev: sh_mobile_lcdcfb: Fix ROP3 sysfs attribute parsing
fbdev: pm3fb: cleanup some confusing indenting
hyperv: hyperv_fb: match wait_for_completion_timeout return type
video: fbdev: use msecs_to_jiffies for time conversions
fbdev: via/via_clock: fix sparse warning
video: fbdev: make of_device_id array const
fbdev: sm501fb: use memset_io
OMAPDSS: workaround for MFLAG + NV12 issue
OMAPDSS: Add support for MFLAG
OMAPDSS: setup default fifo thresholds
OMAPDSS: DISPC: lock access to DISPC_CONTROL & DISPC_CONFIG
OMAPDSS: DISPC: fix div by zero issue in overlay scaling
OMAPDSS: DISPC: change sync_pclk_edge default value
OMAPDSS: change signal_level & signal_edge enum values
OMAPDSS: DISPC: explicit handling for sync and de levels
OMAPDSS: DISPC: remove OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES
...
Setting a dev_pm_ops resume callback but not a set of hibernation
handler means that pm function will not be called upon hibernation.
Fix this by using SIMPLE_DEV_PM_OPS, which appropriately assigns the
suspend and hibernation handlers and move omap_dmm_resume under
CONFIG_PM_SLEEP to avoid build warnings.
Signed-off-by: Grygorii Strashko <grygorii.strashko@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
[tomi valkeinen: add missing 'static']
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Setting a dev_pm_ops suspend/resume pair but not a set of hibernation
functions means those pm functions will not be called upon hibernation.
Fix this by using SIMPLE_DEV_PM_OPS, which appropriately assigns the
suspend and hibernation handlers and move
omap_drm_suspend/omap_drm_resume under CONFIG_PM_SLEEP to avoid build
warnings.
Signed-off-by: Grygorii Strashko <Grygorii.Strashko@linaro.org>
[tomi.valkeinen@ti.com: fix conflict, clean up description]
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We store the fb being page-flipped to 'old_fb' field, but we don't
increase the ref count of the fb when doing that. While I am not
sure if it can cause problem in practice, it's still safer to keep a ref
when storing a pointer to a fb.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omapdrm DMM code sometimes crashes with:
WARNING: CPU: 0 PID: 1235 at lib/list_debug.c:36 __list_add+0x8c/0xbc()
list_add double add: new=e9265368, prev=e90139c4, next=e9265368.
This is caused by the code calling release_engine() twice for the same
engine.
dmm_txn_commit(wait=true) call is supposed to wait until the DMM
transaction has been finished. And it does that, but it does not wait
for the irq handler to finish.
What happens is that the irq handler is triggered, and it either wakes
up the thread that called dmm_txn_commit(), or that thread never even
slept because the transaction was finished in the HW very quickly. That
thread then continues executing, even if the irq handler is not yet
finished, and a new transaction may be initiated. If that transaction is
async (i.e. wait=false), a 'async' flag is set to true. The original irq
handler, which has yet not finished, then sees the transaction as
'async', even if it was supposed to be 'sync'.
When that happens, the irq handler does an extra release_engine() call
because it thinks it need to release the engine, leading to the crash.
This patch fixes the issue by using completion to ensure that the irq
handler has finished before a dmm_txn_commit(wait=true) may continue.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
omap_gem_objects are added to dev->obj_list in omap_gem_new, and removed
in omap_gem_free_object. Unfortunately there's no locking for
dev->obj_list, which eventually leads to a crash:
WARNING: CPU: 1 PID: 1123 at lib/list_debug.c:59 __list_del_entry+0xa4/0xe0()
list_del corruption. prev->next should be e9281344, but was ea722b84
Add a spinlock to protect dev->obj_list.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
spin_is_locked(x) returns always 0 on uniprocessor, triggering BUG() in
omapdrm.
Change it to use assert_spin_locked() to fix the issue.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We need to ignore DIGIT SYNC LOST error when enabling/disabling TV
output. The code does that, but it ignores the DIGI SYNC LOST when
enabling any output. Normally this does no harm, but it could make us
miss DIGIT SYNC LOST on some rare occasions.
Fix the code to only ignore DIGIT SYNC LOST when enabling/disabling TV.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
omapdrm tries to avoid error floods by unregistering the error irq when
an error happens, and then registering the error irq again later.
However, the code is racy, as it sometimes tries to unregister the error
irq when it's already unregistered, leading to WARN().
Also, the code only registers the error irq again when something is done
on that particular output, i.e. if only TV is used to flip the buffers,
and LCD is showing a same buffer, an error on LCD will cause the LCD
error irq to be unregistered and never registered again.
To fix this, let's keep the error irqs always enabled and trust the
DRM_ERROR_RATELIMITED to limit the flood.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
omapdrm uses normal DRM_ERROR() print when the HW reports an error. As
we sometimes may get a flood of errors, let's rather use
DRM_ERROR_RATELIMITED().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
When not using proper hotplug detection, DRM polls periodically the
connectors to find out if a cable is connected. This polling can happen
at any time, even very late in the suspend process.
This causes a problem with omapdrm, when the poll happens during the
suspend process after GPIOs have been disabled, leading to a crash in
gpio_get().
This patch fixes the issue by adding suspend and resume hooks to
omapdrm, in which we disable and enable, respectively, the polling.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
omapdrm has dummy functions for platform_device's
suspend/resume/shutdown. The functions don't do anything, and those
platform device functions are deprecated, so remove them from omapdrm.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The tiler irq handler uses engine->async value, but the code that sets
engine->async and enables the interrupt does not have a barrier. This
may cause the irq handler to see the old value of engine->async, causing
memory corruption.
Reported-by: Harinarayan Bhatta <harinarayan@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
omap_plane_pre_apply() sets the plane's output channel too late, only
after the plane has already been otherwise configured and enabled. This
causes problems, as at the configuration stage we need to make decisions
based on the output channel.
This may lead to bad plane settings or failing to setup the plane.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
On OMAP5 it is not possible to use TILER buffer with CPU when caching or
write-combining is used. Doing so leads to errors from the memory
manager.
However, on OMAP4, write-combining works fine.
This patch adds platform specific data for the TILER, and a function
tiler_get_cpu_cache_flags() which can be used to get the caching mode to
be used.
Note that without write-combining the use of the TILER buffer with CPU
is unusably slow. It's still good to have it operational for testing
purposes.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
omapdrm doesn't check if the pitch of the framebuffer and the color
format's bits-per-pixel are compatible. omapdss requires that the stride
of a buffer is an integer number of pixels
For example, when using modetest with a display that has x resolution of
1280, and using packed 24 RGB mode (3 bytes per pixel), modetest
allocates a buffer with a byte stride of 4 * 1280 = 5120. But 5120 / 3 =
1706.666... pixels, which causes wrong colors and a tilt on the screen.
Add a check into omapdrm to return an error if the user tries to use
such a combination.
Note: this is not a HW requirement at least for non-rotation use cases,
but a SW driver requirement. In the future we should study if also
rotation use cases are fine with any stride size, and if so, change the
driver to allow these strides.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
When an error happens in omap_framebuffer_create(),
omap_framebuffer_create() calls omap_framebuffer_destroy() if the fb
struct has been allocated. However, that crashes, as
omap_framebuffer_destroy(), which calls drm_framebuffer_cleanup(),
should only be called after drm_framebuffer_init()
Fix this by just calling kfree() for the allocated fb when an error
happens.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
omapdrm should work fine even if fbdev is missing. The current driver
crashes in that case, though, as it is missing checks for the fbdev.
Add the checks so that we don't free fbdev or restore fbdev mode when
there's no fbdev.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
unpin_worker() calls omap_framebuffer_unpin() without any locks, which
looks very suspicious. However, both pin and unpin are always called via
the driver's private workqueue, so the access is synchronized that way.
Add a comment to make this clear.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
omap_framebuffer_pin() and omap_framebuffer_unpin() are currently
broken, as they cannot be called multiple times (i.e. pin, pin, unpin,
unpin), which is what happens in certain cases. This issue causes the
driver to possibly use 0 as an address for a displayed buffer, leading
to OCP error from DSS.
This patch fixes the issue by adding a simple pin_count, used to track
the number of pins.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Clear omap_obj's paddr when unmapping the memory, so that it's easier to
catch bad use of the paddr.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The DRM documentation says:
"If a page flip is already pending, the page_flip operation must return
-EBUSY."
Currently omapdrm returns -EINVAL instead. Fix omapdrm by returning
-EBUSY.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
OMAP DSS hardware supports changing the output port to which an overlay
manager's video stream goes. For example, DPI video stream can come from
any of the four overlay managers on OMAP5.
However, as it's difficult to manage the change in the driver, the
omapdss driver does not support that at the moment, and has a hardcoded
overlay manager per output.
omapdrm, on the other hand, uses the hardware features to find out which
overlay manager to use for an output, which causes problems. For
example, on OMAP5, omapdrm tries to use DIGIT overlay manager for DPI
output, instead of the LCD3 required by the omapdss driver.
This patch changes the omapdrm to use the omapdss driver's hardcoded
overlay managers, which fixes the issue.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The next commit will need functions to be reordered. Do it separately to
help review.
This only moves functions without any change to the code.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Sumit Semwal
Linus Torvalds
Grygorii Strashko
Tomi Valkeinen
Laurent Pinchart