Commit Graph

180 Commits

Author SHA1 Message Date
Jeff Layton 23e66ba971 rpc_pipe: fix cleanup of dummy gssd directory when notification fails
Currently, it could leak dentry references in some cases. Make sure
we clean up properly.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-12-10 19:39:53 +02:00
Jeff Layton e2f0c83a9d sunrpc: add an "info" file for the dummy gssd pipe
rpc.gssd expects to see an "info" file in each clntXX dir. Since adding
the dummy gssd pipe, users that run rpc.gssd see a lot of these messages
spamming the logs:

    rpc.gssd[508]: ERROR: can't open /var/lib/nfs/rpc_pipefs/gssd/clntXX/info: No such file or directory
    rpc.gssd[508]: ERROR: failed to read service info

Add a dummy gssd/clntXX/info file to help silence these messages.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-12-06 13:06:34 -05:00
Jeff Layton 3396f92f8b rpc_pipe: remove the clntXX dir if creating the pipe fails
In the event that we create the gssd/clntXX dir, but the pipe creation
subsequently fails, then we should remove the clntXX dir before
returning.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-12-06 13:06:33 -05:00
Jeff Layton 89f842435c sunrpc: replace sunrpc_net->gssd_running flag with a more reliable check
Now that we have a more reliable method to tell if gssd is running, we
can replace the sn->gssd_running flag with a function that will query to
see if it's up and running.

There's also no need to attempt an upcall that we know will fail, so
just return -EACCES if gssd isn't running. Finally, fix the warn_gss()
message not to claim that that the upcall timed out since we don't
necesarily perform one now when gssd isn't running, and remove the
extraneous newline from the message.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-12-06 13:06:31 -05:00
Jeff Layton 4b9a445e3e sunrpc: create a new dummy pipe for gssd to hold open
rpc.gssd will naturally hold open any pipe named */clnt*/gssd that shows
up under rpc_pipefs. That behavior gives us a reliable mechanism to tell
whether it's actually running or not.

Create a new toplevel "gssd" directory in rpc_pipefs when it's mounted.
Under that directory create another directory called "clntXX", and then
within that a pipe called "gssd".

We'll never send an upcall along that pipe, and any downcall written to
it will just return -EINVAL.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-12-06 13:06:30 -05:00
Al Viro b26d4cd385 consolidate simple ->d_delete() instances
Rename simple_delete_dentry() to always_delete_dentry() and export it.
Export simple_dentry_operations, while we are at it, and get rid of
their duplicates

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-11-15 22:04:17 -05:00
Al Viro 1e903edadf sunrpc: switch to %pd
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-10-24 23:34:51 -04:00
Trond Myklebust 298fc3558b SUNRPC: Add a helper to allow sharing of rpc_pipefs directory objects
Add support for looking up existing objects and creating new ones if there
is no match.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-09-01 11:12:43 -04:00
Trond Myklebust c36dcfe1f7 SUNRPC: Remove the rpc_client->cl_dentry
It is now redundant.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-09-01 11:12:42 -04:00
Trond Myklebust 6739ffb754 SUNRPC: Add a framework to clean up management of rpc_pipefs directories
The current system requires everyone to set up notifiers, manage directory
locking, etc.
What we really want to do is have the rpc_client create its directory,
and then create all the entries.

This patch will allow the RPCSEC_GSS and NFS code to register all the
objects that they want to have appear in the directory, and then have
the sunrpc code call them back to actually create/destroy their pipefs
dentries when the rpc_client creates/destroys the parent.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-08-30 09:19:38 -04:00
Trond Myklebust 55909f21a1 SUNRPC: Deprecate rpc_client->cl_protname
It just duplicates the cl_program->name, and is not used in any fast
paths where the extra dereference will cause a hit.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-08-30 09:19:34 -04:00
Jeff Layton 275448eb10 rpc_pipe: convert back to simple_dir_inode_operations
Now that Al has fixed simple_lookup to account for the case where
sb->s_d_op is set, there's no need to keep our own special lookup op.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-07-23 18:18:53 -04:00
Linus Torvalds 41d9884c44 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull more vfs stuff from Al Viro:
 "O_TMPFILE ABI changes, Oleg's fput() series, misc cleanups, including
  making simple_lookup() usable for filesystems with non-NULL s_d_op,
  which allows us to get rid of quite a bit of ugliness"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  sunrpc: now we can just set ->s_d_op
  cgroup: we can use simple_lookup() now
  efivarfs: we can use simple_lookup() now
  make simple_lookup() usable for filesystems that set ->s_d_op
  configfs: don't open-code d_alloc_name()
  __rpc_lookup_create_exclusive: pass string instead of qstr
  rpc_create_*_dir: don't bother with qstr
  llist: llist_add() can use llist_add_batch()
  llist: fix/simplify llist_add() and llist_add_batch()
  fput: turn "list_head delayed_fput_list" into llist_head
  fs/file_table.c:fput(): add comment
  Safer ABI for O_TMPFILE
2013-07-14 11:42:26 -07:00
Al Viro dae3794fd6 sunrpc: now we can just set ->s_d_op
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-14 17:55:39 +04:00
Al Viro d3db90b0a4 __rpc_lookup_create_exclusive: pass string instead of qstr
... and use d_hash_and_lookup() instead of open-coding it, for fsck sake...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-14 17:09:57 +04:00
Al Viro a95e691f9c rpc_create_*_dir: don't bother with qstr
just pass the name

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-14 17:02:28 +04:00
Fengguang Wu 4f8568cb52 rpc_pipe: rpc_dir_inode_operations can be static
Hi Jeff,

FYI, there are new sparse warnings show up in

tree:   git://git.linux-nfs.org/projects/trondmy/linux-nfs.git nfs-for-next
head:   296afe1f58d55fd56ed85daaafafcfee39f59ece
commit: 76fa666579 [2/5] rpc_pipe: set dentry operations at d_alloc time

>> net/sunrpc/rpc_pipe.c:496:31: sparse: symbol 'rpc_dir_inode_operations' was not declared. Should it be static?

Please consider folding the attached diff :-)

Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-07-09 21:35:27 -04:00
Jeff Layton 76fa666579 rpc_pipe: set dentry operations at d_alloc time
Currently the way these get set is a little convoluted. If the dentry is
allocated via lookup from userland, then it gets set by simple_lookup.
If it gets allocated when the kernel is populating the directory, then
it gets set via __rpc_lookup_create_exclusive, which has to check
whether they might already be set. Between both of these, this ensures
that all dentries have their d_op pointer set.

Instead of doing that, just have them set at d_alloc time by pointing
sb->s_d_op at them. With that change, we no longer want the lookup op
to set them, so we must move to using our own lookup routine.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-07-09 17:16:39 -04:00
Stanislav Kinsbursky adb6fa7ffe SUNRPC: fix races on PipeFS UMOUNT notifications
CPU#0                                   CPU#1
-----------------------------           -----------------------------
rpc_kill_sb
sn->pipefs_sb = NULL                    rpc_release_client
(UMOUNT_EVENT)                          rpc_free_auth
rpc_pipefs_event
rpc_get_client_for_event
!atomic_inc_not_zero(cl_count)
<skip the client>
                                        atomic_inc(cl_count)
                                        rpc_free_client
                                        rpc_clnt_remove_pipedir
                                        <skip client dir removing>

To fix this, this patch does the following:

1) Calls RPC_PIPEFS_UMOUNT notification with sn->pipefs_sb_lock being held.
2) Removes SUNRPC client from the list AFTER pipes destroying.
3) Doesn't hold RPC client on notification: if client in the list, then it
can't be destroyed while sn->pipefs_sb_lock in hold by notification caller.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-06-28 15:42:02 -04:00
Stanislav Kinsbursky 384816051c SUNRPC: fix races on PipeFS MOUNT notifications
Below are races, when RPC client can be created without PiepFS dentries

CPU#0					CPU#1
-----------------------------		-----------------------------
rpc_new_client				rpc_fill_super
rpc_setup_pipedir
mutex_lock(&sn->pipefs_sb_lock)
rpc_get_sb_net == NULL
(no per-net PipeFS superblock)
					sn->pipefs_sb = sb;
					notifier_call_chain(MOUNT)
					(client is not in the list)
rpc_register_client
(client without pipes dentries)

To fix this patch:
1) makes PipeFS mount notification call with pipefs_sb_lock being held.
2) releases pipefs_sb_lock on new SUNRPC client creation only after
registration.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-06-28 15:41:18 -04:00
Jeff Layton e401452d92 rpc_pipefs: only set rpc_dentry_ops if d_op isn't already set
We had a report of a reproducible WARNING:

[ 1360.039358] ------------[ cut here ]------------
[ 1360.043978] WARNING: at fs/dcache.c:1355 d_set_d_op+0x8d/0xc0()
[ 1360.049880] Hardware name: HP Z200 Workstation
[ 1360.054308] Modules linked in: nfsv4 nfs dns_resolver fscache nfsd
auth_rpcgss nfs_acl lockd sunrpc sg acpi_cpufreq mperf coretemp kvm_intel kvm
snd_hda_codec_realtek snd_hda_intel snd_hda_codec hp_wmi crc32c_intel
snd_hwdep e1000e snd_seq snd_seq_device snd_pcm snd_page_alloc snd_timer snd
sparse_keymap rfkill soundcore serio_raw ptp iTCO_wdt pps_core pcspkr
iTCO_vendor_support mei microcode lpc_ich mfd_core wmi xfs libcrc32c sr_mod
sd_mod cdrom crc_t10dif radeon i2c_algo_bit drm_kms_helper ttm ahci libahci
drm i2c_core libata dm_mirror dm_region_hash dm_log dm_mod [last unloaded:
auth_rpcgss]
[ 1360.107406] Pid: 8814, comm: mount.nfs4 Tainted: G         I --------------   3.9.0-0.55.el7.x86_64 #1
[ 1360.116771] Call Trace:
[ 1360.119219]  [<ffffffff810610c0>] warn_slowpath_common+0x70/0xa0
[ 1360.125208]  [<ffffffff810611aa>] warn_slowpath_null+0x1a/0x20
[ 1360.131025]  [<ffffffff811af46d>] d_set_d_op+0x8d/0xc0
[ 1360.136159]  [<ffffffffa05a7d6f>] __rpc_lookup_create_exclusive+0x4f/0x80 [sunrpc]
[ 1360.143710]  [<ffffffffa05a8cc6>] rpc_mkpipe_dentry+0x86/0x170 [sunrpc]
[ 1360.150311]  [<ffffffffa062a7b6>] nfs_idmap_new+0x96/0x130 [nfsv4]
[ 1360.156475]  [<ffffffffa062e7cd>] nfs4_init_client+0xad/0x2d0 [nfsv4]
[ 1360.162902]  [<ffffffff812f02df>] ? idr_get_empty_slot+0x16f/0x3c0
[ 1360.169062]  [<ffffffff812f0582>] ? idr_mark_full+0x52/0x60
[ 1360.174615]  [<ffffffff812f0699>] ? idr_alloc+0x79/0xe0
[ 1360.179826]  [<ffffffffa0598081>] ? __rpc_init_priority_wait_queue+0x81/0xc0 [sunrpc]
[ 1360.187635]  [<ffffffffa05980f3>] ? rpc_init_wait_queue+0x13/0x20 [sunrpc]
[ 1360.194493]  [<ffffffffa05d05da>] nfs_get_client+0x27a/0x350 [nfs]
[ 1360.200666]  [<ffffffffa062e438>] nfs4_set_client.isra.8+0x78/0x100 [nfsv4]
[ 1360.207624]  [<ffffffffa062f2f3>] nfs4_create_server+0xf3/0x3a0 [nfsv4]
[ 1360.214222]  [<ffffffffa06284be>] nfs4_remote_mount+0x2e/0x60 [nfsv4]
[ 1360.220644]  [<ffffffff8119ea79>] mount_fs+0x39/0x1b0
[ 1360.225691]  [<ffffffff81153880>] ? __alloc_percpu+0x10/0x20
[ 1360.231348]  [<ffffffff811b7ccf>] vfs_kern_mount+0x5f/0xf0
[ 1360.236822]  [<ffffffffa0628396>] nfs_do_root_mount+0x86/0xc0 [nfsv4]
[ 1360.243246]  [<ffffffffa06287b4>] nfs4_try_mount+0x44/0xc0 [nfsv4]
[ 1360.249410]  [<ffffffffa05d1457>] ? get_nfs_version+0x27/0x80 [nfs]
[ 1360.255659]  [<ffffffffa05db985>] nfs_fs_mount+0x5c5/0xd10 [nfs]
[ 1360.261650]  [<ffffffffa05dc550>] ? nfs_clone_super+0x140/0x140 [nfs]
[ 1360.268074]  [<ffffffffa05da8e0>] ? param_set_portnr+0x60/0x60 [nfs]
[ 1360.274406]  [<ffffffff8119ea79>] mount_fs+0x39/0x1b0
[ 1360.279443]  [<ffffffff81153880>] ? __alloc_percpu+0x10/0x20
[ 1360.285088]  [<ffffffff811b7ccf>] vfs_kern_mount+0x5f/0xf0
[ 1360.290556]  [<ffffffff811b9f5d>] do_mount+0x1fd/0xa00
[ 1360.295677]  [<ffffffff81137dee>] ? __get_free_pages+0xe/0x50
[ 1360.301405]  [<ffffffff811b9be6>] ? copy_mount_options+0x36/0x170
[ 1360.307479]  [<ffffffff811ba7e3>] sys_mount+0x83/0xc0
[ 1360.312515]  [<ffffffff8160ad59>] system_call_fastpath+0x16/0x1b
[ 1360.318503] ---[ end trace 8fa1f4cbc36094a7 ]---

The problem is that we're ending up in __rpc_lookup_create_exclusive
with a negative dentry that already has d_op set. A little debugging
has shown that when we hit this, the d_ops are already set to
simple_dentry_operations.

I believe that what's happening is that during a mount, idmapd is racing
in and doing a lookup of /var/lib/nfs/rpc_pipefs/nfs/clnt???/idmap.
Before that dentry reference is released, the kernel races in to create
that file and finds the new negative dentry, which already has the
d_op set.

This patch just avoids setting the d_op if it's already set.
simple_dentry_operations and rpc_dentry_operations are functionally
equivalent so it shouldn't matter which one it's set to.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-06-18 13:46:50 -04:00
Trond Myklebust 2aed8b476f SUNRPC: Convert auth_gss pipe detection to work in namespaces
This seems to have been overlooked when we did the namespace
conversion. If a container is running a legacy version of rpc.gssd
then it will be disrupted if the global 'pipe_version' is set by a
container running the new version of rpc.gssd.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-05-16 06:17:54 -07:00
Trond Myklebust abfdbd53a4 SUNRPC: Faster detection if gssd is actually running
Recent changes to the NFS security flavour negotiation mean that
we have a stronger dependency on rpc.gssd. If the latter is not
running, because the user failed to start it, then we time out
and mark the container as not having an instance. We then
use that information to time out faster the next time.

If, on the other hand, the rpc.gssd successfully binds to an rpc_pipe,
then we mark the container as having an rpc.gssd instance.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-05-16 06:15:41 -07:00
Eric W. Biederman fa7614ddd6 fs: Readd the fs module aliases.
I had assumed that the only use of module aliases for filesystems
prior to "fs: Limit sys_mount to only request filesystem modules."
was in request_module.  It turns out I was wrong.  At least mkinitcpio
in Arch linux uses these aliases.

So readd the preexising aliases, to keep from breaking userspace.

Userspace eventually will have to follow and use the same aliases the
kernel does.  So at some point we may be delete these aliases without
problems.  However that day is not today.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-03-12 18:55:21 -07:00
Eric W. Biederman 7f78e03513 fs: Limit sys_mount to only request filesystem modules.
Modify the request_module to prefix the file system type with "fs-"
and add aliases to all of the filesystems that can be built as modules
to match.

A common practice is to build all of the kernel code and leave code
that is not commonly needed as modules, with the result that many
users are exposed to any bug anywhere in the kernel.

Looking for filesystems with a fs- prefix limits the pool of possible
modules that can be loaded by mount to just filesystems trivially
making things safer with no real cost.

Using aliases means user space can control the policy of which
filesystem modules are auto-loaded by editing /etc/modprobe.d/*.conf
with blacklist and alias directives.  Allowing simple, safe,
well understood work-arounds to known problematic software.

This also addresses a rare but unfortunate problem where the filesystem
name is not the same as it's module name and module auto-loading
would not work.  While writing this patch I saw a handful of such
cases.  The most significant being autofs that lives in the module
autofs4.

This is relevant to user namespaces because we can reach the request
module in get_fs_type() without having any special permissions, and
people get uncomfortable when a user specified string (in this case
the filesystem type) goes all of the way to request_module.

After having looked at this issue I don't think there is any
particular reason to perform any filtering or permission checks beyond
making it clear in the module request that we want a filesystem
module.  The common pattern in the kernel is to call request_module()
without regards to the users permissions.  In general all a filesystem
module does once loaded is call register_filesystem() and go to sleep.
Which means there is not much attack surface exposed by loading a
filesytem module unless the filesystem is mounted.  In a user
namespace filesystems are not mounted unless .fs_flags = FS_USERNS_MOUNT,
which most filesystems do not set today.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Reported-by: Kees Cook <keescook@google.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-03-03 19:36:31 -08:00