There's a new table for calculating the memory pll
parameters on SI. Required for SI DPM support.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This adds dpm support for rv6xx asics. This includes:
- clockgating
- dynamic engine clock scaling
- dynamic memory clock scaling
- dynamic voltage scaling
- dynamic pcie gen1/gen2 switching
Set radeon.dpm=1 to enable.
v2: remove duplicate line
v3: fix thermal interrupt check noticed by Jerome
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
dpm needs access to atombios data and command tables
for setup and calculation of a number of parameters.
v2: endian fix
v3: fix mc reg table bug
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CIK (DCE8) hw cursors are programmed the same as evergreen
(DCE4) with the following caveats:
- cursors are now 128x128 pixels
- new alpha blend enable bit
v2: rebase
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This requires a few changes since that dpcd value is above the
range currently cached by radeon. I've check the dp specs, and
above 0xf there's a big gap and nothing that looks like we should
cache it while a given device is plugged in. It's also the same value
that i915.ko uses.
Hence extend the various dpcd arrays in the radeon driver, use
proper symbolic constants where applicable (one place overallocated
the dpcd array to 25 bytes). Then also drop the rd_interval cache -
radeon_dp_link_train_init re-reads the dpcd block, so the values we'll
consume in train_cr and train_ce will always be fresh.
To avoid needless diff-churn, #define the old size of dpcd as the new
one and keep it around.
v2: Alex Deucher noticed one place where I've forgotten to replace 8
with DP_RECEIVER_CAP_SIZE.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pull drm merge (part 1) from Dave Airlie:
"So first of all my tree and uapi stuff has a conflict mess, its my
fault as the nouveau stuff didn't hit -next as were trying to rebase
regressions out of it before we merged.
Highlights:
- SH mobile modesetting driver and associated helpers
- some DRM core documentation
- i915 modesetting rework, haswell hdmi, haswell and vlv fixes, write
combined pte writing, ilk rc6 support,
- nouveau: major driver rework into a hw core driver, makes features
like SLI a lot saner to implement,
- psb: add eDP/DP support for Cedarview
- radeon: 2 layer page tables, async VM pte updates, better PLL
selection for > 2 screens, better ACPI interactions
The rest is general grab bag of fixes.
So why part 1? well I have the exynos pull req which came in a bit
late but was waiting for me to do something they shouldn't have and it
looks fairly safe, and David Howells has some more header cleanups
he'd like me to pull, that seem like a good idea, but I'd like to get
this merge out of the way so -next dosen't get blocked."
Tons of conflicts mostly due to silly include line changes, but mostly
mindless. A few other small semantic conflicts too, noted from Dave's
pre-merged branch.
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (447 commits)
drm/nv98/crypt: fix fuc build with latest envyas
drm/nouveau/devinit: fixup various issues with subdev ctor/init ordering
drm/nv41/vm: fix and enable use of "real" pciegart
drm/nv44/vm: fix and enable use of "real" pciegart
drm/nv04/dmaobj: fixup vm target handling in preparation for nv4x pcie
drm/nouveau: store supported dma mask in vmmgr
drm/nvc0/ibus: initial implementation of subdev
drm/nouveau/therm: add support for fan-control modes
drm/nouveau/hwmon: rename pwm0* to pmw1* to follow hwmon's rules
drm/nouveau/therm: calculate the pwm divisor on nv50+
drm/nouveau/fan: rewrite the fan tachometer driver to get more precision, faster
drm/nouveau/therm: move thermal-related functions to the therm subdev
drm/nouveau/bios: parse the pwm divisor from the perf table
drm/nouveau/therm: use the EXTDEV table to detect i2c monitoring devices
drm/nouveau/therm: rework thermal table parsing
drm/nouveau/gpio: expose the PWM/TOGGLE parameter found in the gpio vbios table
drm/nouveau: fix pm initialization order
drm/nouveau/bios: check that fixed tvdac gpio data is valid before using it
drm/nouveau: log channel debug/error messages from client object rather than drm client
drm/nouveau: have drm debugging macros build on top of core macros
...
Remove redundant DRM UAPI header #inclusions from drivers/gpu/.
Remove redundant #inclusions of core DRM UAPI headers (drm.h, drm_mode.h and
drm_sarea.h). They are now #included via drmP.h and drm_crtc.h via a preceding
patch.
Without this patch and the patch to make include the UAPI headers from the core
headers, after the UAPI split, the DRM C sources cannot find these UAPI headers
because the DRM code relies on specific -I flags to make #include "..." work
on headers in include/drm/ - but that does not work after the UAPI split without
adding more -I flags.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
Since the current KMS API sets the mode independantly on
each crtc, we may end up with resource conflicts. The PLL
allocation is one of those cases. In the following example
we have 3 crtcs in use driving 2 DVI connectors and 1 DP
connector. On the initial kernel modeset for fbdev, the
display topology ends up as follows:
crtc0 -> DP-0
crtc1 -> DVI-0
crtc2 -> DVI-1
Because this is the first modeset, all of the PLLs are
available as none have been assigned. So we end up with
the following:
crtc0 uses DCPLL
crtc1 uses PPLL2
crtc2 uses PPLL1
When X starts, it assigns a different topology:
crtc0 -> DVI-0
crtc1 -> DP-0
crtc2 -> DVI-1
However, since the KMS API is per crtc, we set the mode on each
crtc independantly. When it comes time to set the mode on crtc0,
the topology for crtc1 and crtc2 are still intact. crtc1 and
crtc2 are already assigned PPLL2 and PPLL1 so when it comes time
to set the mode on crtc0, crtc1 and crtc2 have not been torn down
yet, so there appears to be no PLLs available. In reality, we
are reconfiguring the entire display topology, however, since
each crtc is handled independantly, we don't know that in the
driver at each crtc mode set time.
This patch checks to see if the same connector is being driven by
another crtc, and if so, uses the PLL already associated with it.
v2: store connector in the radeon crtc struct, simplify checking.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need the calculate the pixel clock before allocating a PPLL
in order to insure the clocks really match.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set up an handler for ACPI events and respond to brightness change
requests from the system BIOS.
v2: fix notification when using device-specific command codes
(tested by Pali Rohár <pali.rohar@gmail.com>); cache the encoder
controlling the backlight during the initialization to avoid searching
it every time (suggested by Alex Deucher).
v3: whitespace fixes (Alex Deucher).
Signed-off-by: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A table in the vbios tells us whether the GPU backlight controller
is used or not. If the bit is set, the GPU backlight controller is
used; if it is not set, an off-chip backlight controller is used.
v2: store all the firmware flags, not just BL control
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to make sure the crtc is gated on before modesetting.
Explicitly gate the crtc on in prepare() and set a flag
so that the dpms functions don't gate it off during
mode set.
Noticed by sylware on IRC.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Alex Deucher
Niels Ole Salscheider
Christian König
Daniel Vetter
Linus Torvalds
David Howells
Luca Tettamanti