Fix locking. Use two queues in the driver, one for pending transacions, and
one for transactions which are actually running on the hardware. Call
dma_run_dependencies() on descriptor cleanup so that the async_tx API works
correctly.
There are a number of places throughout the code where lists of descriptors
are freed in a loop. Create functions to handle this, and use them instead
of open-coding the loop each time.
Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The name fsl_chan seems too long, so it has been shortened to chan. There
are only a few places where the higher level "struct dma_chan *chan" name
conflicts. These have been changed to "struct dma_chan *dchan" instead.
Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The IRQ probing is needlessly complex. All off the 83xx device trees in
arch/powerpc/boot/dts/ specify 5 interrupts per DMA controller: one for the
controller, and one for each channel. These interrupts are all attached to
the same IRQ line.
This causes an interesting situation if two channels interrupt at the same
time. The per-controller handler will handle the first channel, and the
per-channel handler will handle the remaining channels.
Instead of this mess, we fix the bug in the per-controller handler, and
make it handle all channels that generated an interrupt. When a
per-controller handler is specified in the device tree, we prefer to use
the shared handler instead of the per-channel handler.
The 85xx/86xx controllers do not have a per-controller interrupt, and
instead use a per-channel interrupt. This behavior has not been changed.
Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This fixes some errors in the cleanup paths of the OF subsystem, including
missing checks for ioremap failing. Also, some variables were renamed for
brevity.
Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Most functions in the standard library use "dst" as a parameter, rather
than "dest". This renames all use of "dest" to "dst" to match the usual
convention.
Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This is the beginning of a cleanup which will change all instances of
"fsl_dma" to "fsldma" to match the name of the driver itself.
Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Remove some unused members from the fsldma data structures. A few trivial
uses of struct resource were converted to use the stack rather than keeping
the memory allocated for the lifetime of the driver.
Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Some of the functions are written in a way where they use multiple reads
and writes where a single read/write pair could suffice. This shrinks the
kernel text size measurably, while making the functions easier to
understand.
add/remove: 0/0 grow/shrink: 1/4 up/down: 4/-196 (-192)
function old new delta
fsl_chan_set_request_count 120 124 +4
dma_halt 300 272 -28
fsl_chan_set_src_loop_size 208 156 -52
fsl_chan_set_dest_loop_size 208 156 -52
fsl_chan_xfer_ld_queue 500 436 -64
Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
drivers/dma: Correct use after free
drivers/dma: drop unnecesary memset
ioat2,3: put channel hardware in known state at init
async_tx: expand async raid6 test to cover ioatdma corner case
ioat3: fix p-disabled q-continuation
sh: fix DMA driver's descriptor chaining and cookie assignment
dma: at_hdmac: correct incompatible type for argument 1 of 'spin_lock_bh'
Move the kfree after the iounmap that refers to the same structure.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
expression x,e;
identifier f;
iterator I;
statement S;
@@
*kfree(x);
... when != &x
when != x = e
when != I(x,...) S
*x->f
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
memset of 0 is not needed after kzalloc
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression x;
statement S;
@@
x = kzalloc(...);
if (x == NULL) S
... when != x
-memset(x,0,...);// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Put the ioat2 and ioat3 state machines in the halted state with all
errors cleared.
The ioat1 init path is not disturbed for stability, there are no
reported ioat1 initiaization issues.
Cc: <stable@kernel.org>
Reported-by: Roland Dreier <rdreier@cisco.com>
Tested-by: Roland Dreier <rdreier@cisco.com>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
When continuing a pq calculation the driver needs 3 extra sources. The
driver can perform a 3 source calculation with a single descriptor, but
needs an extended descriptor to process up to 8 sources in one
operation. However, in the p-disabled case only one extra source is
needed. When continuing a p-disabled operation there are occasions
(i.e. 0 < src_cnt % 8 < 3) where the tail operation does not need an
extended descriptor. Properly account for this fact otherwise invalid
'dmacount' values will be written to hardware usually causing the
channel to halt with 'invalid descriptor' errors.
Cc: <stable@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The SH DMA driver wrongly assigns negative cookies to transfer descriptors,
also, its chaining of partial descriptors is broken. The latter problem is
usually invisible, because maximum transfer size per chunk is 16M, but if you
artificially set this limit lower, the driver fails. Since cookies are also
used in chunk management, both these problems are fixed in one patch. As side
effects a possible memory leak, when descriptors are prepared, but not
submitted, and multiple races have also been fixed.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
ppc440spe-adma: adds updated ppc440spe adma driver
iop-adma.c: use resource_size()
dmaengine: clarify the meaning of the DMA_CTRL_ACK flag
sh: stylistic improvements for the DMA driver
dmaengine: fix dmatest to verify minimum transfer length and test buffer size
sh: DMA driver has to specify its alignment requirements
Add COH 901 318 DMA block driver v5
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (34 commits)
m68k: rename global variable vmalloc_end to m68k_vmalloc_end
percpu: add missing per_cpu_ptr_to_phys() definition for UP
percpu: Fix kdump failure if booted with percpu_alloc=page
percpu: make misc percpu symbols unique
percpu: make percpu symbols in ia64 unique
percpu: make percpu symbols in powerpc unique
percpu: make percpu symbols in x86 unique
percpu: make percpu symbols in xen unique
percpu: make percpu symbols in cpufreq unique
percpu: make percpu symbols in oprofile unique
percpu: make percpu symbols in tracer unique
percpu: make percpu symbols under kernel/ and mm/ unique
percpu: remove some sparse warnings
percpu: make alloc_percpu() handle array types
vmalloc: fix use of non-existent percpu variable in put_cpu_var()
this_cpu: Use this_cpu_xx in trace_functions_graph.c
this_cpu: Use this_cpu_xx for ftrace
this_cpu: Use this_cpu_xx in nmi handling
this_cpu: Use this_cpu operations in RCU
this_cpu: Use this_cpu ops for VM statistics
...
Fix up trivial (famous last words) global per-cpu naming conflicts in
arch/x86/kvm/svm.c
mm/slab.c
This patch adds new version of the PPC440SPe ADMA driver.
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The size of the requested and ioremaped memory is off by 1.
Use resource_size() to get the correct value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Transfers and the test buffer have to be at least align bytes long.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The SH DMA driver by default uses 32-byte transfers, in this mode buffers and
sizes have to be 32-byte aligned. Specifying this requirement also fixes Oopses
with dmatest.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Ira Snyder
Linus Torvalds
Dan Williams
Julia Lawall
Guennadi Liakhovetski
Nicolas Ferre
Alexey Dobriyan
Anatolij Gustschin
H Hartley Sweeten