Fix ptr_ret.cocci warnings:
drivers/pnp/pnpbios/core.c:584:1-3: WARNING: PTR_ERR_OR_ZERO can be used
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR
Generated by: scripts/coccinelle/api/ptr_ret.cocci
Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The file was converted from print_fn_descriptor_symbol()
to %pF some time ago (2e532d68a2 {pci,pnp} quirks.c:
don't use deprecated print_fn_descriptor_symbol()). kallsyms
does not seem to be needed anymore.
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
... and __initconst if applicable.
Based on similar work for an older kernel in the Grsecurity patch.
[JD: fix toshiba-wmi build]
[JD: add htcpen]
[JD: move __initconst where checkscript wants it]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v4.13 series.
Some administrativa:
I have a slew of 8250 serial patches and the new IOT2040 serial+GPIO
driver coming in through this tree, along with a whole bunch of Exar
8250 fixes. These are ACKed by Greg and also hit drivers/platform/*
where they are ACKed by Andy Shevchenko.
Speaking about drivers/platform/* there is also a bunch of ACPI stuff
coming through that route, again ACKed by Andy.
The MCP23S08 changes are coming in here as well. You already have the
commits in your tree, so this is just a result of sharing an immutable
branch between pin control and GPIO.
Core:
- Export add/remove for lookup tables so that modules can export GPIO
descriptor tables.
- Handle GPIO sleep states: it is now possible to flag that a GPIO
line may loose its state during suspend/resume of the system to
save power. This is used in the Wolfson Micro Arizona driver.
- ACPI-based GPIO was tightened up a lot around the edges.
- Use bitmap_fill() to speed up a loop.
New drivers:
- Exar XRA1403 SPI-based GPIO.
- MVEBU driver now supports Armada 7K and 8K.
- LP87565 PMIC GPIO.
- Renesas R-CAR R8A7743 (RZ/G1M).
- The new IOT2040 8250 serial/GPIO also comes in through this
changeset.
Substantial driver changes:
- Seriously fix the Exar 8250 GPIO portions to work.
- The MCP23S08 was moved out to a pin control driver.
- Convert MEVEBU to use regmap for register access.
- Drop Vulcan support from the Broadcom driver.
- Serious cleanup and improvement of the mockup driver, giving us a
better test coverage.
Misc:
- Lots of janitorial clean up.
- A bunch of documentation fixes"
* tag 'gpio-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (70 commits)
serial: exar: Add support for IOT2040 device
gpio-exar/8250-exar: Make set of exported GPIOs configurable
platform: Accept const properties
serial: exar: Factor out platform hooks
gpio-exar/8250-exar: Rearrange gpiochip parenthood
gpio: exar: Fix iomap request
gpio-exar/8250-exar: Do not even instantiate a GPIO device for Commtech cards
serial: uapi: Add support for bus termination
gpio: rcar: Add R8A7743 (RZ/G1M) support
gpio: gpio-wcove: Fix GPIO control register offset calculation
gpio: lp87565: Add support for GPIO
gpio: dwapb: fix missing first irq for edgeboth irq type
MAINTAINERS: Take maintainership for GPIO ACPI support
gpio: exar: Fix reading of directions and values
gpio: exar: Allocate resources on behalf of the platform device
gpio-exar/8250-exar: Fix passing in of parent PCI device
gpio: mockup: use devm_kcalloc() where applicable
gpio: mockup: add myself as author
gpio: mockup: improve the error message
gpio: mockup: don't return magic numbers from probe()
...
Currently, there are two separate ways of handling device wakeup
settings in the ACPI core, depending on whether this is runtime
wakeup or system wakeup (from sleep states). However, after the
previous commit eliminating the run_wake ACPI device wakeup flag,
there is no difference between the two any more at the ACPI level,
so they can be combined.
For this reason, introduce acpi_pm_set_device_wakeup() to replace both
acpi_pm_device_run_wake() and acpi_pm_device_sleep_wake() and make it
check the ACPI device object's wakeup.valid flag to determine whether
or not the device can be set up to generate wakeup signals.
Also notice that zpodd_enable/disable_run_wake() only call
device_set_run_wake() because acpi_pm_device_run_wake() called
device_run_wake(), which is not done by acpi_pm_set_device_wakeup(),
so drop the now redundant device_set_run_wake() calls from there.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
The PNP ACPI driver parses ACPI interrupt resource but not
GpioInt resource. When the firmware passes GpioInt resource
for IRQ the PNP ACPI driver ignores it and hence the interrupt for
the particular driver will not work.
One such example is 8042 keyboard which uses PNP driver for obtaining
the interrupt resource. On Intel Braswell project GpioInt is used
instead of interrupt resource and the keyboard driver fails to
register interrupt.
Fix the issue by parsing GpioInt resource type.
Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
[Fixed a parenthesis coding style thing]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This was entirely automated, using the script by Al:
PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
$(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)
to do the replacement at the end of the merge window.
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The Makefile currently controlling compilation of this code is:
obj-y += pnp.o
pnp-y := core.o compat.o
...meaning that it currently is not being built as a module by anyone.
Lets remove the couple traces of modular infrastructure use, so that
when reading the driver there is no doubt it is builtin-only.
Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.
We don't replace module.h with init.h since the file already has that.
But we do add moduleparam.h since the file does use module_param().
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix build errors due to missing header file:
../drivers/pnp/pnpbios/core.c: In function 'pnp_dock_event':
../drivers/pnp/pnpbios/core.c:141:2: error: implicit declaration of function 'call_usermodehelper' [-Werror=implicit-function-declaration]
value = call_usermodehelper(argv [0], argv, envp, UMH_WAIT_EXEC);
^
../drivers/pnp/pnpbios/core.c:141:52: error: 'UMH_WAIT_EXEC' undeclared (first use in this function)
value = call_usermodehelper(argv [0], argv, envp, UMH_WAIT_EXEC);
^
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull PNP update from Rafael Wysocki:
"One simple change to make the PNP core use device_initcall() instead
of module_init() to run pnpbios_thread_init() (Paul Gortmaker)"
* tag 'pnp-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PNP: make pnpbios core explicitly non-modular
The Kconfig currently controlling compilation of this code is:
config PNPBIOS
bool "Plug and Play BIOS support"
...meaning that it currently is not being built as a module by anyone.
Lets remove the couple traces of modularity, so that when reading the
driver there is no doubt it is builtin-only.
Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull driver core updates from Greg KH:
"Here's the "big" driver core update for 4.7-rc1.
Mostly just debugfs changes, the long-known and messy races with
removing debugfs files should be fixed thanks to the great work of
Nicolai Stange. We also have some isa updates in here (the x86
maintainers told me to take it through this tree), a new warning when
we run out of dynamic char major numbers, and a few other assorted
changes, details in the shortlog.
All have been in linux-next for some time with no reported issues"
* tag 'driver-core-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (32 commits)
Revert "base: dd: don't remove driver_data in -EPROBE_DEFER case"
gpio: ws16c48: Utilize the ISA bus driver
gpio: 104-idio-16: Utilize the ISA bus driver
gpio: 104-idi-48: Utilize the ISA bus driver
gpio: 104-dio-48e: Utilize the ISA bus driver
watchdog: ebc-c384_wdt: Utilize the ISA bus driver
iio: stx104: Utilize the module_isa_driver and max_num_isa_dev macros
iio: stx104: Add X86 dependency to STX104 Kconfig option
Documentation: Add ISA bus driver documentation
isa: Implement the max_num_isa_dev macro
isa: Implement the module_isa_driver macro
pnp: pnpbios: Add explicit X86_32 dependency to PNPBIOS
isa: Decouple X86_32 dependency from the ISA Kconfig option
driver-core: use 'dev' argument in dev_dbg_ratelimited stub
base: dd: don't remove driver_data in -EPROBE_DEFER case
kernfs: Move faulting copy_user operations outside of the mutex
devcoredump: add scatterlist support
debugfs: unproxify files created through debugfs_create_u32_array()
debugfs: unproxify files created through debugfs_create_blob()
debugfs: unproxify files created through debugfs_create_bool()
...
The PNPBIOS driver requires preprocessor defines (located in
include/asm/segment.h) only declared if the architecture is set to
X86_32. If the architecture is set to X86_64, the PNPBIOS driver will
not build properly. The X86 dependecy for the PNPBIOS configuration
option is changed to an explicit X86_32 dependency in order to prevent
an attempt to build for an unsupported architecture.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An error message is printed for resources of type 19, which is a valid
supported resource type. The Firmware Test Suite tool (fwts) reports
this as a test failure. This change fixes the false test failures
for ASL that use type 19 (ACPI_RESOURCE_TYPE_SERIAL_BUS) resources.
Signed-off-by: Harb Abdulhamid <harba@codeaurora.org>
Signed-off-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add device ID 0x0a04 for Haswell-ULT to the list of devices with MCH
problems.
From a Lenovo ThinkPad T440S:
[ 0.188604] pnp: PnP ACPI init
[ 0.189044] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.189048] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.189050] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.189052] system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
[ 0.189054] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
[ 0.189056] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
[ 0.189058] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
[ 0.189060] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
[ 0.189061] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
[ 0.189063] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.189065] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.189067] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.189069] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.189071] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.189073] system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved
[ 0.189075] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.189078] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.189082] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.189216] system 00:01: [io 0x1800-0x189f] could not be reserved
[ 0.189220] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.189222] system 00:01: [io 0x0880-0x08ff] has been reserved
[ 0.189224] system 00:01: [io 0x0900-0x097f] has been reserved
[ 0.189226] system 00:01: [io 0x0980-0x09ff] has been reserved
[ 0.189229] system 00:01: [io 0x0a00-0x0a7f] has been reserved
[ 0.189231] system 00:01: [io 0x0a80-0x0aff] has been reserved
[ 0.189233] system 00:01: [io 0x0b00-0x0b7f] has been reserved
[ 0.189235] system 00:01: [io 0x0b80-0x0bff] has been reserved
[ 0.189238] system 00:01: [io 0x15e0-0x15ef] has been reserved
[ 0.189240] system 00:01: [io 0x1600-0x167f] has been reserved
[ 0.189242] system 00:01: [io 0x1640-0x165f] has been reserved
[ 0.189246] system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved
[ 0.189249] system 00:01: [mem 0x00000000-0x00000fff] could not be reserved
[ 0.189251] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.189254] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.189256] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.189258] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.189261] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.189264] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[....]
[ 0.583653] resource sanity check: requesting [mem 0xfed10000-0xfed15fff], which spans more than pnp 00:01 [mem 0xfed10000-0xfed13fff]
[ 0.583654] ------------[ cut here ]------------
[ 0.583660] WARNING: CPU: 0 PID: 1 at arch/x86/mm/ioremap.c:198 __ioremap_caller+0x2c5/0x380()
[ 0.583661] Info: mapping multiple BARs. Your kernel is fine.
[ 0.583662] Modules linked in:
[ 0.583666] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.3.3-303.fc23.x86_64 #1
[ 0.583668] Hardware name: LENOVO 20AR001GXS/20AR001GXS, BIOS GJET86WW (2.36 ) 12/04/2015
[ 0.583670] 0000000000000000 0000000014cf7e59 ffff880214a1baf8 ffffffff813a625f
[ 0.583673] ffff880214a1bb40 ffff880214a1bb30 ffffffff810a07c2 00000000fed10000
[ 0.583675] ffffc90000cb8000 0000000000006000 0000000000000000 ffff8800d6381040
[ 0.583678] Call Trace:
[ 0.583683] [<ffffffff813a625f>] dump_stack+0x44/0x55
[ 0.583686] [<ffffffff810a07c2>] warn_slowpath_common+0x82/0xc0
[ 0.583688] [<ffffffff810a085c>] warn_slowpath_fmt+0x5c/0x80
[ 0.583692] [<ffffffff810a6fba>] ? iomem_map_sanity_check+0xba/0xd0
[ 0.583695] [<ffffffff81065835>] __ioremap_caller+0x2c5/0x380
[ 0.583698] [<ffffffff81065907>] ioremap_nocache+0x17/0x20
[ 0.583701] [<ffffffff8103a119>] snb_uncore_imc_init_box+0x79/0xb0
[ 0.583705] [<ffffffff81038900>] uncore_pci_probe+0xd0/0x1b0
[ 0.583707] [<ffffffff813efda5>] local_pci_probe+0x45/0xa0
[ 0.583710] [<ffffffff813f118d>] pci_device_probe+0xfd/0x140
[ 0.583713] [<ffffffff814d9b52>] driver_probe_device+0x222/0x480
[ 0.583715] [<ffffffff814d9e34>] __driver_attach+0x84/0x90
[ 0.583717] [<ffffffff814d9db0>] ? driver_probe_device+0x480/0x480
[ 0.583720] [<ffffffff814d762c>] bus_for_each_dev+0x6c/0xc0
[ 0.583722] [<ffffffff814d930e>] driver_attach+0x1e/0x20
[ 0.583724] [<ffffffff814d8e4b>] bus_add_driver+0x1eb/0x280
[ 0.583727] [<ffffffff81d6af1a>] ? uncore_cpu_setup+0x12/0x12
[ 0.583729] [<ffffffff814da680>] driver_register+0x60/0xe0
[ 0.583733] [<ffffffff813ef78c>] __pci_register_driver+0x4c/0x50
[ 0.583736] [<ffffffff81d6affc>] intel_uncore_init+0xe2/0x2e6
[ 0.583738] [<ffffffff81d6af1a>] ? uncore_cpu_setup+0x12/0x12
[ 0.583741] [<ffffffff81002123>] do_one_initcall+0xb3/0x200
[ 0.583745] [<ffffffff810be500>] ? parse_args+0x1a0/0x4a0
[ 0.583749] [<ffffffff81d5c1c8>] kernel_init_freeable+0x189/0x223
[ 0.583752] [<ffffffff81775c40>] ? rest_init+0x80/0x80
[ 0.583754] [<ffffffff81775c4e>] kernel_init+0xe/0xe0
[ 0.583758] [<ffffffff81781adf>] ret_from_fork+0x3f/0x70
[ 0.583760] [<ffffffff81775c40>] ? rest_init+0x80/0x80
[ 0.583765] ---[ end trace 077c426a39e018aa ]---
00:00.0 Host bridge [0600]: Intel Corporation Haswell-ULT DRAM Controller [8086:0a04] (rev 0b)
Subsystem: Lenovo Device [17aa:220c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: hsw_uncore
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1300955
Tested-by: <robo@tcp.sk>
Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
I have a device (Nuvoton 6779D Super-IO IR RC with nuvoton-cir driver)
which works after initial boot but not any longer if I unload and
re-load the driver module.
Digging into the issue I found that unloading the driver calls
pnp_disable_dev although the driver has flag PNP_DRIVER_RES_DO_NOT_CHANGE
set. IMHO this is not right.
Let's have a look at the call chain when probing a device:
pnp_device_probe
1. attaches the device
2. if it's not active and PNP_DRIVER_RES_DO_NOT_CHANGE is not set
it gets activated
3. probes driver
I think pnp_device_remove should do it in reverse order and also
respect PNP_DRIVER_RES_DO_NOT_CHANGE. Therefore:
1. call drivers remove callback
2. if device is active and PNP_DRIVER_RES_DO_NOT_CHANGE is not set
disable it
3. detach device
The change works for me and sounds logical to me.
However I don't know the pnp driver in detail so I might be wrong.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Vasyl Gomonovych
Sergey Senozhatsky
Greg Kroah-Hartman
Christoph Hellwig
Linus Torvalds
Rafael J. Wysocki
Andy Shevchenko
Jagadish Krishnamoorthy
Thomas Garnier
Paul Gortmaker
Randy Dunlap
Andy Lutomirski
William Breathitt Gray
Luis R. Rodriguez
Harb Abdulhamid
Josh Boyer
Heiner Kallweit
Christophe Le Roy
Rasmus Villemoes