This name is just passed to platform_device_alloc which has its parameter
declared const.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
When SYSFS=n and MODULES=y, build ends with:
linux-2.6.24-rc6-mm1/drivers/base/module.c: In function 'module_add_driver':
linux-2.6.24-rc6-mm1/drivers/base/module.c:49: error: 'module_kset' undeclared (first use in this function)
make[3]: *** [drivers/base/module.o] Error 1
Below is one possible fix.
Build-tested with all 4 config combinations of SYSFS & MODULES.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
LIST_HEAD has been widely used, so switch to this simpler method.
Signed-off-by: Denis Cheng <crquan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
All kobjects require a dynamically allocated name now. We no longer
need to keep track if the name is statically assigned, we can just
unconditionally free() all kobject names on cleanup.
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There is no need for kobject_unregister() anymore, thanks to Kay's
kobject cleanup changes, so replace all instances of it with
kobject_put().
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We save the current state in the object itself, so we can do proper
cleanup when the last reference is dropped.
If the initial reference is dropped, the object will be removed from
sysfs if needed, if an "add" event was sent, "remove" will be send, and
the allocated resources are released.
This allows us to clean up some driver core usage as well as allowing us
to do other such changes to the rest of the kernel.
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Now that the old kobject_init() function is gone, rename
kobject_init_ng() to kobject_init() to clean up the namespace.
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Now that the old kobject_add() function is gone, rename kobject_add_ng()
to kobject_add() to clean up the namespace.
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This converts the code to use the new kobject functions, cleaning up the
logic in doing so.
Cc: Neil Brown <neilb@suse.de>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This moves the block devices to /sys/class/block. It will create a
flat list of all block devices, with the disks and partitions in one
directory. For compatibility /sys/block is created and contains symlinks
to the disks.
/sys/class/block
|-- sda -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda
|-- sda1 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda1
|-- sda10 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda10
|-- sda5 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda5
|-- sda6 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda6
|-- sda7 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda7
|-- sda8 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda8
|-- sda9 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda9
`-- sr0 -> ../../devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0
/sys/block/
|-- sda -> ../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda
`-- sr0 -> ../devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We should remove the glue directory between the class and the bus
device _after_ we sent out the 'remove' event for the device, otherwise
the parent relationship is no longer valid, and composing the path
with deleted sysfs entries will not work.
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch (as1013) was suggested by David Woodhouse; it fixes a race
in the driver core. If a device is unregistered at the same time as
its driver is unloaded, the driver's code pages may be unmapped while
the remove method is still running. The calls to get_driver() and
put_driver() were intended to prevent this, but they don't work if the
driver's module count has already dropped to 0.
Instead, the patch keeps the device on the driver's list until after
the remove method has returned. This forces the necessary
synchronization to occur.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Stop using kobject_register, as this way we can control the sending of
the uevent properly, after everything is properly initialized.
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The driver core debugging messages are a mess. This provides a unified
message that makes them actually useful.
The format for new kobject debug messages should be:
driver/bus/class: 'OBJECT_NAME': FUNCTION_NAME: message.\n
Note, the class code is not changed in this patch due to pending patches
in my queue that this would conflict with. A later patch will clean
them up.
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes the kobject, and a few other driver-core-only fields
out of struct driver and into the driver core only. Now drivers can be
safely create on the stack or statically (like they currently are.)
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The module driver specific code should belong in the driver core, not in
the kernel/ directory. So move this code. This is done in preparation
for some struct device_driver rework that should be confined to the
driver core code only.
This also lets us keep from exporting these functions, as no external
code should ever be calling it.
Thanks to Andrew Morton for the !CONFIG_MODULES fix.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The iseries driver wants to hang kobjects off of its driver, so, to
preserve backwards compatibility, we need to add a call to the driver
core to allow future changes to work properly.
Hopefully no one uses this function in the future and the iseries_veth
driver authors come to their senses so I can remove this hack...
Cc: Dave Larson <larson1@us.ibm.com>
Cc: Santiago Leon <santil@us.ibm.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Make the ipath driver use the new driver functions so that it does not
touch the sysfs portion of the driver structure.
We also remove the redundant symlink from the device back to the driver,
as it is already in the sysfs tree. Any userspace tools should be using
the standard symlink, not some driver specific one.
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: Arthur Jones <arthur.jones@qlogic.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is lot like default attributes for devices (and indeed,
a lot of the code is lifted from there).
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The PCI bus should not be trying to declare its own attribute type.
Especially as this code could never ever be called because the driver
core overwrites the driver kobject type to be its own internal type.
Delete all of this code as it was never being used and is not correct.
Also update my copyright on the file while I'm touching things there.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Don't try to call the "raw" sysfs_create_file when we already have a
helper function to do this kind of work for us.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Don't try to call the "raw" sysfs_create_file when we already have a
helper function to do this kind of work for us.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Don't try to call the "raw" sysfs_create_file when we already have a
helper function to do this kind of work for us.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Stephen Rothwell
Randy Dunlap
Denis Cheng
Kay Sievers
Greg Kroah-Hartman
Alan Stern
Cornelia Huck