Before transmission of the last word in PIO RX_ONLY mode rx+tx mode
is enabled:
/* prevent last RX_ONLY read from triggering
* more word i/o: switch to rx+tx
*/
if (c == 0 && tx == NULL)
mcspi_write_cs_reg(spi,
OMAP2_MCSPI_CHCONF0, l);
But because c is decremented after the test, c will never be zero and
rx+tx will not be enabled. This breaks RX_ONLY mode PIO transfers.
Fix it by decrementing c in the beginning of the various I/O loops.
Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The "DEBUG" symbol needs to be defined before #including <linux/kernel.h> to
get the pr_debug() working.
Signed-off-by: Márton Németh <nm127@freemail.hu>
Signed-off-by: Len Brown <len.brown@intel.com>
Add leading zeros to pr_debug() calls. For example if x=0x0a, the format
"0x%2x" will result the string "0x a", the format "0x%2.2x" will result "0x0a".
Signed-off-by: Márton Németh <nm127@freemail.hu>
Signed-off-by: Len Brown <len.brown@intel.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
sis190: scheduling while atomic error
sis190: mdio operation failure is not correctly detected
sis190: remove duplicate INIT_WORK
sis190: add cmos ram access code for the SiS19x/968 chipset pair
[INET]: Fix truesize setting in ip_append_data
[NETNS]: Re-export init_net via EXPORT_SYMBOL.
iwlwifi: fix possible read attempt on ucode that is not available
[IPV4]: Add missing skb->truesize increment in ip_append_page().
[TULIP] DMFE: Fix SROM parsing regression.
[BLUETOOTH]: Move children of connection device to NULL before connection down.
This DMI blacklist reduces the console messages
on systems which have a BIOS that invokes OSI(Linux).
As the DMI blacklist already knows about these systems,
the request for DMI info itself is disabled.
Further, if OSI(Linux) has already been determined
to have no beneift, we disable the console message
requesting acpi_osi=Linux test results.
Signed-off-by: Len Brown <len.brown@intel.com>
If BIOS invokes _OSI(Linux), the kernel response
depends on what the ACPI DMI list knows about the system,
and that is reflectd in dmesg:
1) System unknown to DMI:
ACPI: BIOS _OSI(Linux) query ignored
ACPI: DMI System Vendor: LENOVO
ACPI: DMI Product Name: 7661W1P
ACPI: DMI Product Version: ThinkPad T61
ACPI: DMI Board Name: 7661W1P
ACPI: DMI BIOS Vendor: LENOVO
ACPI: DMI BIOS Date: 10/18/2007
ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
2) System known to DMI, but effect of OSI(Linux) unknown:
ACPI: DMI detected: Lenovo ThinkPad T61
...
ACPI: BIOS _OSI(Linux) query ignored via DMI
ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
3) System known to DMI, which disables _OSI(Linux):
ACPI: DMI detected: Lenovo ThinkPad T61
...
ACPI: BIOS _OSI(Linux) query ignored via DMI
4) System known to DMI, which enable _OSI(Linux):
ACPI: DMI detected: Lenovo ThinkPad T61
ACPI: Added _OSI(Linux)
...
ACPI: BIOS _OSI(Linux) query honored via DMI
cmdline overrides take precidence over the built-in
default and the DMI prescribed default.
cmdline "acpi_osi=Linux" results in:
ACPI: BIOS _OSI(Linux) query honored via cmdline
Signed-off-by: Len Brown <len.brown@intel.com>
Linux does not want BIOS writers to invoke _OSI(Linux) -
for in the field it causes more Windows incompatibility problems
than it solves.
So when it is seen in the BIOS for an Intel Customer Reference Board,
Linux should ignore its effect by default, and should complain loudly.
Otherwise, the reference BIOS will go unfixed, and the bad BIOS
will spread to the field.
Users of this board can get the old behavior with "acpi_osi=Linux"
As this was the only entry, delete acpi_osl_dmi_table[].
Signed-off-by: Len Brown <len.brown@intel.com>
This simply allows other sub-systems (such as ACPI)
to access and print out slots in static dmi_ident[].
Signed-off-by: Len Brown <len.brown@intel.com>
I've verified (on my Initio 9100 with a DAT drive) that the
2.6.24-rc8-git6 initio module still hangs on loading.
These fixes (other than the printk) are needed to get the module to load
ok (and work correctly) with my adapter & tape drive.
a) printk cosmetic fix
b) cblk->sglen needs setting for later DMA I/O routines to use
c) host->bios_addr needs setting for debug output correctness
d) semaph & semaph_lock initialisation had got lost since 2.6.22
e) since 2.6.22 the bios data address was truncated to 16 bits (needs 20
when shifted left)
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Kalle Valo
Linus Torvalds
Len Brown
Márton Németh
Alexey Starikovskiy
Carlos Martín
Stuart Swales
Francois Romieu