The mediatek IOMMU driver enables some drivers that it does not directly
rely on, and that causes a warning for build testing:
warning: (MTK_IOMMU_V1) selects COMMON_CLK_MT2701_VDECSYS which has unmet direct dependencies (COMMON_CLK && COMMON_CLK_MT2701)
warning: (MTK_IOMMU_V1) selects COMMON_CLK_MT2701_IMGSYS which has unmet direct dependencies (COMMON_CLK && COMMON_CLK_MT2701)
warning: (MTK_IOMMU_V1) selects COMMON_CLK_MT2701_MMSYS which has unmet direct dependencies (COMMON_CLK && COMMON_CLK_MT2701)
This removes the select statements.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
With the device <-> stream ID relationship suitably abstracted and
of_xlate() hooked up, the PCI dependency now looks, and is, entirely
arbitrary. Any bus using the of_dma_configure() mechanism will work,
so extend support to the platform and AMBA buses which do just that.
Acked-by: Will Deacon <will.deacon@arm.com>
Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Now that the driver is DT adapted, bus_set_iommu gets called only
when on compatible matching. So the driver should not break multiplatform
builds now. So remove the BROKEN config.
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Tested-by: Archit Taneja <architt@codeaurora.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Mediatek SoC's M4U has two generations of HW architcture. Generation one
uses flat, one layer pagetable, and was shipped with ARM architecture, it
only supports 4K size page mapping. MT2701 SoC uses this generation one
m4u HW. Generation two uses the ARM short-descriptor translation table
format for address translation, and was shipped with ARM64 architecture,
MT8173 uses this generation two m4u HW. All the two generation iommu HW
only have one iommu domain, and all its iommu clients share the same
iova address.
These two generation m4u HW have slit different register groups and
register offset, but most register names are the same. This patch add iommu
support for mediatek SoC mt2701.
Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The statistics are not really used for anything and should
be replaced by generic and per-device statistic counters.
Remove the code for now.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Freescale PAMU can be enabled on both 32 and 64-bit
Power chips. Commit 477ab7a19c restricted PAMU to PPC32.
PPC covers both.
Signed-off-by: Andy Fleming <afleming@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
IOMMU_DMA does indeed depend on scatterlists having a DMA length, but
the NEED_SG_DMA_LENGTH symbol should be selected, not depended upon.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The newly added Mediatek IOMMU driver uses the IOMMU_DMA infrastructure,
but unlike other such drivers, it does not select 'ARM_DMA_USE_IOMMU',
which is a prerequisite, leading to a link error:
warning: (MTK_IOMMU) selects IOMMU_DMA which has unmet direct dependencies (IOMMU_SUPPORT && NEED_SG_DMA_LENGTH)
drivers/iommu/built-in.o: In function `iommu_put_dma_cookie':
mtk_iommu.c:(.text+0x11fe): undefined reference to `put_iova_domain'
drivers/iommu/built-in.o: In function `iommu_dma_init_domain':
mtk_iommu.c:(.text+0x1316): undefined reference to `init_iova_domain'
drivers/iommu/built-in.o: In function `__iommu_dma_unmap':
mtk_iommu.c:(.text+0x1380): undefined reference to `find_iova'
This adds the same select that the other drivers have. On a related
note, I wonder if we should just always select ARM_DMA_USE_IOMMU
whenever any IOMMU driver is enabled. Are there any cases where
we would enable an IOMMU but not use it?
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 0df4fabe20 ("iommu/mediatek: Add mt8173 IOMMU driver")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Make use of ARCH_RENESAS in place of ARCH_SHMOBILE.
This is part of an ongoing process to migrate from ARCH_SHMOBILE to
ARCH_RENESAS the motivation for which being that RENESAS seems to be a more
appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This patch adds support for v5 of SYSMMU controller, found in Samsung
Exynos 5433 SoCs. The main difference of v5 is support for 36-bit physical
address space and some changes in register layout and core clocks hanging.
This patch also adds support for ARM64 architecture, which is used by
Exynos 5433 SoCs.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add a nearly-complete ARMv7 short descriptor implementation, omitting
only a few legacy and CPU-centric aspects which shouldn't be necessary
for IOMMU API use anyway.
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Tested-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
As of commit 44d88c754e ("ARM: shmobile: Remove legacy SoC code
for R-Mobile A1"), the Renesas IPMMU/IPMMUI driver is no longer used.
In theory it could still be used on SH-Mobile AG5 and R-Mobile A1 SoCs,
but that requires adding DT support to the driver, which is not
planned.
Remove the driver, it can be resurrected from git history when needed.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Pull iommu updates from Joerg Roedel:
"This time including:
- A new IOMMU driver for s390 pci devices
- Common dma-ops support based on iommu-api for ARM64. The plan is
to use this as a basis for ARM32 and hopefully other architectures
as well in the future.
- MSI support for ARM-SMMUv3
- Cleanups and dead code removal in the AMD IOMMU driver
- Better RMRR handling for the Intel VT-d driver
- Various other cleanups and small fixes"
* tag 'iommu-updates-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (41 commits)
iommu/vt-d: Fix return value check of parse_ioapics_under_ir()
iommu/vt-d: Propagate error-value from ir_parse_ioapic_hpet_scope()
iommu/vt-d: Adjust the return value of the parse_ioapics_under_ir
iommu: Move default domain allocation to iommu_group_get_for_dev()
iommu: Remove is_pci_dev() fall-back from iommu_group_get_for_dev
iommu/arm-smmu: Switch to device_group call-back
iommu/fsl: Convert to device_group call-back
iommu: Add device_group call-back to x86 iommu drivers
iommu: Add generic_device_group() function
iommu: Export and rename iommu_group_get_for_pci_dev()
iommu: Revive device_group iommu-ops call-back
iommu/amd: Remove find_last_devid_on_pci()
iommu/amd: Remove first/last_device handling
iommu/amd: Initialize amd_iommu_last_bdf for DEV_ALL
iommu/amd: Cleanup buffer allocation
iommu/amd: Remove cmd_buf_size and evt_buf_size from struct amd_iommu
iommu/amd: Align DTE flag definitions
iommu/amd: Remove old alias handling code
iommu/amd: Set alias DTE in do_attach/do_detach
iommu/amd: WARN when __[attach|detach]_device are called with irqs enabled
...
Pull intel iommu updates from David Woodhouse:
"This adds "Shared Virtual Memory" (aka PASID support) for the Intel
IOMMU. This allows devices to do DMA using process address space,
translated through the normal CPU page tables for the relevant mm.
With corresponding support added to the i915 driver, this has been
tested with the graphics device on Skylake. We don't have the
required TLP support in our PCIe root ports for supporting discrete
devices yet, so it's only integrated devices that can do it so far"
* git://git.infradead.org/intel-iommu: (23 commits)
iommu/vt-d: Fix rwxp flags in SVM device fault callback
iommu/vt-d: Expose struct svm_dev_ops without CONFIG_INTEL_IOMMU_SVM
iommu/vt-d: Clean up pasid_enabled() and ecs_enabled() dependencies
iommu/vt-d: Handle Caching Mode implementations of SVM
iommu/vt-d: Fix SVM IOTLB flush handling
iommu/vt-d: Use dev_err(..) in intel_svm_device_to_iommu(..)
iommu/vt-d: fix a loop in prq_event_thread()
iommu/vt-d: Fix IOTLB flushing for global pages
iommu/vt-d: Fix address shifting in page request handler
iommu/vt-d: shift wrapping bug in prq_event_thread()
iommu/vt-d: Fix NULL pointer dereference in page request error case
iommu/vt-d: Implement SVM_FLAG_SUPERVISOR_MODE for kernel access
iommu/vt-d: Implement SVM_FLAG_PRIVATE_PASID to allocate unique PASIDs
iommu/vt-d: Add callback to device driver on page faults
iommu/vt-d: Implement page request handling
iommu/vt-d: Generalise DMAR MSI setup to allow for page request events
iommu/vt-d: Implement deferred invalidate for SVM
iommu/vt-d: Add basic SVM PASID support
iommu/vt-d: Always enable PASID/PRI PCI capabilities before ATS
iommu/vt-d: Add initial support for PASID tables
...
Despite being a platform device, the SMMUv3 is capable of signaling
interrupts using MSIs. Hook it into the platform MSI framework and
enjoy faults being reported in a new and exciting way.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
[will: tidied up the binding example and reworked most of the code]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Taking inspiration from the existing arch/arm code, break out some
generic functions to interface the DMA-API to the IOMMU-API. This will
do the bulk of the heavy lifting for IOMMU-backed dma-mapping.
Since associating an IOVA allocator with an IOMMU domain is a fairly
common need, rather than introduce yet another private structure just to
do this for ourselves, extend the top-level struct iommu_domain with the
notion. A simple opaque cookie allows reuse by other IOMMU API users
with their various different incompatible allocator types.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This provides basic PASID support for endpoint devices, tested with a
version of the i915 driver.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
The behaviour if you enable PASID support after ATS is undefined. So we
have to enable it first, even if we don't know whether we'll need it.
This is safe enough; unless we set up a context that permits it, the device
can't actually *do* anything with it.
Also shift the feature detction to dmar_insert_one_dev_info() as it only
needs to happen once.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Arnd Bergmann
Robin Murphy
Joerg Roedel
Sricharan R
Honghui Zhang
Andy Fleming
Yong Wu
Simon Horman
Marek Szyprowski
Geert Uytterhoeven
Linus Torvalds
Marc Zyngier
David Woodhouse