Move complete knowledge of namespaces into the kobject layer
so we can use that information when reporting kobjects to
userspace.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Of the three uses of kref_set in the kernel:
One really should be kref_put as the code is letting go of a
reference,
Two really should be kref_init because the kref is being
initialised.
This suggests that making kref_set available encourages bad code.
So fix the three uses and remove kref_set completely.
Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* git://git.infradead.org/mtd-2.6: (154 commits)
mtd: cfi_cmdset_0002: use AMD standard command-set with Winbond flash chips
mtd: cfi_cmdset_0002: Fix MODULE_ALIAS and linkage for new 0701 commandset ID
mtd: mxc_nand: Remove duplicate NAND_CMD_RESET case value
mtd: update gfp/slab.h includes
jffs2: Stop triggering block erases from jffs2_write_super()
jffs2: Rename jffs2_erase_pending_trigger() to jffs2_dirty_trigger()
jffs2: Use jffs2_garbage_collect_trigger() to trigger pending erases
jffs2: Require jffs2_garbage_collect_trigger() to be called with lock held
jffs2: Wake GC thread when there are blocks to be erased
jffs2: Erase pending blocks in GC pass, avoid invalid -EIO return
jffs2: Add 'work_done' return value from jffs2_erase_pending_blocks()
mtd: mtdchar: Do not corrupt backing device of device node inode
mtd/maps/pcmciamtd: Fix printk format for ssize_t in debug messages
drivers/mtd: Use kmemdup
mtd: cfi_cmdset_0002: Fix argument order in bootloc warning
mtd: nand: add Toshiba TC58NVG0 device ID
pcmciamtd: add another ID
pcmciamtd: coding style cleanups
pcmciamtd: fixing obvious errors
mtd: chips: add SST39WF160x NOR-flashes
...
Trivial conflicts due to dev_node removal in drivers/mtd/maps/pcmciamtd.c
The only way the debugger can handle a trap in inside rcu_lock,
notify_die, or atomic_notifier_call_chain without a recursive fault is
to have a low level "first opportunity handler" do_trap_or_bp() handler.
Generally this will be something the vast majority of folks will not
need, but for those who need it, it is added as a kernel .config
option called KGDB_LOW_LEVEL_TRAP.
Also added was a die notification for oops such that kdb can catch an
oops for analysis.
There appeared to be no obvious way to pass the struct pt_regs from
the original exception back to the stack back tracer, so a special
case was added to show_stack() for when kdb is active because you
generally desire to generally look at the back trace of the original
exception.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
The only way the debugger can handle a trap in inside rcu_lock,
notify_die, or atomic_notifier_call_chain without a triple fault is
to have a low level "first opportunity handler" in the int3 exception
handler.
Generally this will be something the vast majority of folks will not
need, but for those who need it, it is added as a kernel .config
option called KGDB_LOW_LEVEL_TRAP.
CC: Ingo Molnar <mingo@elte.hu>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: H. Peter Anvin <hpa@zytor.com>
CC: x86@kernel.org
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
This patch adds in the kdb PS/2 keyboard driver. This was mostly a
direct port from the original kdb where I cleaned up the code against
checkpatch.pl and added the glue to stitch it into kgdb.
This patch also enables early kdb debug via kgdbwait and the keyboard.
All the access to configure kdb using either a serial console or the
keyboard is done via kgdboc.
If you want to use only the keyboard and want to break in early you
would add to your kernel command arguments:
kgdboc=kbd kgdbwait
If you wanted serial and or the keyboard access you could use:
kgdboc=kbd,ttyS0
You can also configure kgdboc as a kernel module or at run time with
the sysfs where you can activate and deactivate kgdb.
Turn it on:
echo kbd,ttyS0 > /sys/module/kgdboc/parameters/kgdboc
Turn it off:
echo "" > /sys/module/kgdboc/parameters/kgdboc
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
These are the minimum changes to the kgdb core in order to enable an
API to connect a new front end (kdb) to the debug core.
This patch introduces the dbg_kdb_mode variable controls where the
user level I/O is routed. It will be routed to the gdbstub (kgdb) or
to the kdb front end which is a simple shell available over the kgdboc
connection.
You can switch back and forth between kdb or the gdb stub mode of
operation dynamically. From gdb stub mode you can blindly type
"$3#33", or from the kdb mode you can enter "kgdb" to switch to the
gdb stub.
The logic in the debug core depends on kdb to look for the typical gdb
connection sequences and return immediately with KGDB_PASS_EVENT if a
gdb serial command sequence is detected. That should allow a
reasonably seamless transition between kdb -> gdb without leaving the
kernel exception state. The two gdb serial queries that kdb is
responsible for detecting are the "?" and "qSupported" packets.
CC: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Martin Hicks <mort@sgi.com>
There are many different UUID/GUID definitions in kernel, such as that
in EFI, many file systems, some drivers, etc. Every kernel components
need UUID/GUID has its own definition. This patch provides a unified
definition for UUID/GUID.
UUID is defined via typedef. This makes that UUID appears more like a
preliminary type, and makes the data type explicit (comparing with
implicit "u8 uuid[16]").
The binary representation of UUID/GUID can be little-endian (used by
EFI, etc) or big-endian (defined by RFC4122), so both is defined.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
WARN() is used in some places to report firmware or hardware bugs that
are then worked-around. These bugs do not affect the stability of the
kernel and should not set the flag for TAINT_WARN. To allow for this,
add WARN_TAINT() and WARN_TAINT_ONCE() macros that take a taint number
as argument.
Architectures that implement warnings using trap instructions instead
of calls to warn_slowpath_*() now implement __WARN_TAINT(taint)
instead of __WARN().
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Helge Deller <deller@gmx.de>
Tested-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* 'x86-pat-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, pat: Update the page flags for memtype atomically instead of using memtype_lock
x86, pat: In rbt_memtype_check_insert(), update new->type only if valid
x86, pat: Migrate to rbtree only backend for pat memtype management
x86, pat: Preparatory changes in pat.c for bigger rbtree change
rbtree: Add support for augmented rbtrees
* 'core-hweight-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, hweight: Use a 32-bit popcnt for __arch_hweight32()
arch, hweight: Fix compilation errors
x86: Add optimized popcnt variants
bitops: Optimize hweight() by making use of compile-time evaluation
* 'x86-atomic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: Fix LOCK_PREFIX_HERE for uniprocessor build
x86, atomic64: In selftest, distinguish x86-64 from 586+
x86-32: Fix atomic64_inc_not_zero return value convention
lib: Fix atomic64_inc_not_zero test
lib: Fix atomic64_add_unless return value convention
x86-32: Fix atomic64_add_unless return value convention
lib: Fix atomic64_add_unless test
x86: Implement atomic[64]_dec_if_positive()
lib: Only test atomic64_dec_if_positive on archs having it
x86-32: Rewrite 32-bit atomic64 functions in assembly
lib: Add self-test for atomic64_t
x86-32: Allow UP/SMP lock replacement in cmpxchg64
x86: Add support for lock prefix in alternatives
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (24 commits)
rcu: remove all rcu head initializations, except on_stack initializations
rcu head introduce rcu head init on stack
Debugobjects transition check
rcu: fix build bug in RCU_FAST_NO_HZ builds
rcu: RCU_FAST_NO_HZ must check RCU dyntick state
rcu: make SRCU usable in modules
rcu: improve the RCU CPU-stall warning documentation
rcu: reduce the number of spurious RCU_SOFTIRQ invocations
rcu: permit discontiguous cpu_possible_mask CPU numbering
rcu: improve RCU CPU stall-warning messages
rcu: print boot-time console messages if RCU configs out of ordinary
rcu: disable CPU stall warnings upon panic
rcu: enable CPU_STALL_VERBOSE by default
rcu: slim down rcutiny by removing rcu_scheduler_active and friends
rcu: refactor RCU's context-switch handling
rcu: rename rcutiny rcu_ctrlblk to rcu_sched_ctrlblk
rcu: shrink rcutiny by making synchronize_rcu_bh() be inline
rcu: fix now-bogus rcu_scheduler_active comments.
rcu: Fix bogus CONFIG_PROVE_LOCKING in comments to reflect reality.
rcu: ignore offline CPUs in last non-dyntick-idle CPU check
...
This new config is deemed to simplify even more the lockup detector
dependencies and can make it easier to bring a smooth sorting
between archs that support the new generic lockup detector and those
that still have their own, especially for those that are in the
middle of this migration.
Instead of checking whether we have CONFIG_LOCKUP_DETECTOR +
CONFIG_PERF_EVENTS_NMI each time an arch wants to know if it needs
to build its own lockup detector, take a shortcut with this new
config. It is enabled only if the hardlockup detection part of
the whole lockup detector is on.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
We kept CONFIG_DETECT_SOFTLOCKUP around for compatibility with
older configs. But it was enabled by default if CONFIG_DEBUG_KERNEL.
So if we want to enable CONFIG_LOCKUP_DETECTOR on configs that had
CONFIG_DETECT_SOFTLOCKUP, all we need is to have the same enabling
by default if CONFIG_DEBUG_KERNEL. We can then remove
CONFIG_DETECT_SOFTLOCKUP directly.
So tag CONFIG_LOCKUP_DETECTOR as default y. This is what we want for
most serious kernel debugging anyway.
And also forbid the lockup detector in S390 as it was for the
previous softlockup detector, event though the true reason for that
is not outlined.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
If there are no active threasd using a semaphore, it is always correct
to unqueue blocked threads. This seems to be what was intended in the
undo code.
What was done instead, was to look for a sem count of zero - this is an
impossible situation, given that at least one thread is known to be
queued on the semaphore. The code might be correct as written, but it's
hard to reason about and it's not what was intended (otherwise the goto
out would have been unconditional).
Go for checking the active count - the alternative is not worth the
headache.
Signed-off-by: Michel Lespinasse <walken@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The new nmi_watchdog (which uses the perf event subsystem) is very
similar in structure to the softlockup detector. Using Ingo's
suggestion, I combined the two functionalities into one file:
kernel/watchdog.c.
Now both the nmi_watchdog (or hardlockup detector) and softlockup
detector sit on top of the perf event subsystem, which is run every
60 seconds or so to see if there are any lockups.
To detect hardlockups, cpus not responding to interrupts, I
implemented an hrtimer that runs 5 times for every perf event
overflow event. If that stops counting on a cpu, then the cpu is
most likely in trouble.
To detect softlockups, tasks not yielding to the scheduler, I used the
previous kthread idea that now gets kicked every time the hrtimer fires.
If the kthread isn't being scheduled neither is anyone else and the
warning is printed to the console.
I tested this on x86_64 and both the softlockup and hardlockup paths
work.
V2:
- cleaned up the Kconfig and softlockup combination
- surrounded hardlockup cases with #ifdef CONFIG_PERF_EVENTS_NMI
- seperated out the softlockup case from perf event subsystem
- re-arranged the enabling/disabling nmi watchdog from proc space
- added cpumasks for hardlockup failure cases
- removed fallback to soft events if no PMU exists for hard events
V3:
- comment cleanups
- drop support for older softlockup code
- per_cpu cleanups
- completely remove software clock base hardlockup detector
- use per_cpu masking on hard/soft lockup detection
- #ifdef cleanups
- rename config option NMI_WATCHDOG to LOCKUP_DETECTOR
- documentation additions
V4:
- documentation fixes
- convert per_cpu to __get_cpu_var
- powerpc compile fixes
V5:
- split apart warn flags for hard and soft lockups
TODO:
- figure out how to make an arch-agnostic clock2cycles call
(if possible) to feed into perf events as a sample period
[fweisbec: merged conflict patch]
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
LKML-Reference: <1273266711-18706-2-git-send-email-dzickus@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Implement a basic state machine checker in the debugobjects.
This state machine checker detects races and inconsistencies within the "active"
life of a debugobject. The checker only keeps track of the current state; all
the state machine logic is kept at the object instance level.
The checker works by adding a supplementary "unsigned int astate" field to the
debug_obj structure. It keeps track of the current "active state" of the object.
The only constraints that are imposed on the states by the debugobjects system
is that:
- activation of an object sets the current active state to 0,
- deactivation of an object expects the current active state to be 0.
For the rest of the states, the state mapping is determined by the specific
object instance. Therefore, the logic keeping track of the state machine is
within the specialized instance, without any need to know about it at the
debugobject level.
The current object active state is changed by calling:
debug_object_active_state(addr, descr, expect, next)
where "expect" is the expected state and "next" is the next state to move to if
the expected state is found. A warning is generated if the expected is not
found.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David S. Miller <davem@davemloft.net>
CC: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
CC: akpm@linux-foundation.org
CC: mingo@elte.hu
CC: laijs@cn.fujitsu.com
CC: dipankar@in.ibm.com
CC: josh@joshtriplett.org
CC: dvhltc@us.ibm.com
CC: niv@us.ibm.com
CC: peterz@infradead.org
CC: rostedt@goodmis.org
CC: Valdis.Kletnieks@vt.edu
CC: dhowells@redhat.com
CC: eric.dumazet@gmail.com
CC: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The CPU_STALL_VERBOSE kernel configuration parameter was added to
2.6.34 to identify any preempted/blocked tasks that were preventing
the current grace period from completing when running preemptible
RCU. As is conventional for new configurations parameters, this
defaulted disabled. It is now time to enable it by default.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There is no need to disable lockdep after an RCU lockdep splat,
so remove the debug_lockdeps_off() from lockdep_rcu_dereference().
To avoid repeated lockdep splats, use a static variable in the inlined
rcu_dereference_check() and rcu_dereference_protected() macros so that
a given instance splats only once, but so that multiple instances can
be detected per boot.
This is controlled by a new config variable CONFIG_PROVE_RCU_REPEATEDLY,
which is disabled by default. This provides the normal lockdep behavior
by default, but permits people who want to find multiple RCU-lockdep
splats per boot to easily do so.
Requested-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Tested-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Eric W. Biederman
NeilBrown
Linus Torvalds
Jason Wessel
Huang Ying
Frederic Weisbecker
Ben Hutchings
kirjanov@gmail.com
Michel Lespinasse
Don Zickus
Mathieu Desnoyers
Paul E. McKenney
Lai Jiangshan