This allows us to turn on/off the dprintk() debugging interfaces for
those distributions that don't ship the 'rpcdebug' utility.
It also allows us to add Kbuild dependencies. Specifically, we already
know that dprintk() in general relies on CONFIG_SYSCTL. Now it turns out
that the NFS dprintks depend on CONFIG_CRC32 after we added support
for the filehandle hash.
Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Ensure that we conditionally drop the inode->i_lock when it is safe
to do so in the commit loops.
We do so after locking the nfs_page, but before removing it from the
commit list. We can then use list_safe_reset_next to recover the loop
after the lock is retaken.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
It is quite possible for the release_lockowner RPC call to race with the
close RPC call, in which case, we cannot dereference lsp->ls_state in
order to find the nfs_server.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The decrement is handled by each call to nfs_request_remove_commit_list,
no need to do it again in nfs_scan_commit.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The problem is that for the case of priority queues, we
have to assume that __rpc_remove_wait_queue_priority will move new
elements from the tk_wait.links lists into the queue->tasks[] list.
We therefore cannot use list_for_each_entry_safe() on queue->tasks[],
since that will skip these new tasks that __rpc_remove_wait_queue_priority
is adding.
Without this fix, rpc_wake_up and rpc_wake_up_status will both fail
to wake up all functions on priority wait queues, which can result
in some nasty hangs.
Reported-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org
These changes fix readdir loops on ext4 filesystems with dir_index
turned on. I'm pulling them from Ted's tree as I'd like to give them
some extra nfsd testing, and expect to be applying (potentially
conflicting) patches to the same code before the next merge window.
From the nfs-ext4-premerge branch of
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Use 32-bit or 64-bit llseek() hashes for directory offsets depending on
the NFS version. NFSv2 gets 32-bit hashes only.
NOTE: This patch got rather complex as Christoph asked to set the
filp->f_mode flag in the open call or immediatly after dentry_open()
in nfsd_open() to avoid races.
Personally I still do not see a reason for that and in my opinion
FMODE_32BITHASH/FMODE_64BITHASH flags could be set nfsd_readdir(), as it
follows directly after nfsd_open() without a chance of races.
Signed-off-by: Bernd Schubert <bernd.schubert@itwm.fraunhofer.de>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Acked-by: J. Bruce Fields<bfields@redhat.com>
Just rename this variable, as the next patch will add a flag and
'access' as variable name would not be correct any more.
Signed-off-by: Bernd Schubert <bernd.schubert@itwm.fraunhofer.de>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Acked-by: J. Bruce Fields<bfields@redhat.com>
Traditionally ext2/3/4 has returned a 32-bit hash value from llseek()
to appease NFSv2, which can only handle a 32-bit cookie for seekdir()
and telldir(). However, this causes problems if there are 32-bit hash
collisions, since the NFSv2 server can get stuck resending the same
entries from the directory repeatedly.
Allow ext4 to return a full 64-bit hash (both major and minor) for
telldir to decrease the chance of hash collisions. This still needs
integration on the NFS side.
Patch-updated-by: Bernd Schubert <bernd.schubert@itwm.fraunhofer.de>
(blame me if something is not correct)
Signed-off-by: Fan Yong <yong.fan@whamcloud.com>
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Bernd Schubert <bernd.schubert@itwm.fraunhofer.de>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Using user credentials for RENEW calls will fail when the user
credentials have expired.
To avoid this, try using the machine credentials when making RENEW
calls. If no machine credentials have been set, fall back to using user
credentials as before.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
- Fix a race in which NFS_I(inode)->commits_outstanding could potentially
go to zero (triggering a call to nfs_commit_clear_lock()) before we're
done sending out all the commit RPC calls.
- If nfs_commitdata_alloc fails, there is no reason why we shouldn't
try to send off all the commits-to-ds.
- Simplify the error handling.
- Change pnfs_commit_list() to always return either
PNFS_ATTEMPTED or PNFS_NOT_ATTEMPTED.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Fred Isaman <iisaman@netapp.com>
Move more pnfs-isms out of the generic commit code.
Bugfixes:
- filelayout_scan_commit_lists doesn't need to get/put the lseg.
In fact since it is run under the inode->i_lock, the lseg_put()
can deadlock.
- Ensure that we distinguish between what needs to be done for
commit-to-data server and what needs to be done for commit-to-MDS
using the new flag PG_COMMIT_TO_DS. Otherwise we may end up calling
put_lseg() on a bucket for a struct nfs_page that got written
through the MDS.
- Fix a case where we were using list_del() on an nfs_page->wb_list
instead of list_del_init().
- filelayout_initiate_commit needs to call filelayout_commit_release
on error instead of the mds_ops->rpc_release(). Otherwise it won't
clear the commit lock.
Cleanups:
- Let the files layout manage the commit lists for the pNFS case.
Don't expose stuff like pnfs_choose_commit_list, and the fact
that the commit buckets hold references to the layout segment
in common code.
- Cast out the put_lseg() calls for the struct nfs_read/write_data->lseg
into the pNFS layer from whence they came.
- Let the pNFS layer manage the NFS_INO_PNFS_COMMIT bit.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Fred Isaman <iisaman@netapp.com>
We should use the 'ifdebug' wrapper rather than trying to inline
tests of nfs_debug, so that the code compiles correctly when we
don't define NFS_DEBUG.
Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Adding rate limit on `Lock reclaim failed` messages since it could fill
up system logs
Signed-off-by: William Dauchy <wdauchy@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
At some past instance Linus Trovalds wrote:
> From: Linus Torvalds <torvalds@linux-foundation.org>
> commit a84a79e4d3 upstream.
>
> The size is always valid, but variable-length arrays generate worse code
> for no good reason (unless the function happens to be inlined and the
> compiler sees the length for the simple constant it is).
>
> Also, there seems to be some code generation problem on POWER, where
> Henrik Bakken reports that register r28 can get corrupted under some
> subtle circumstances (interrupt happening at the wrong time?). That all
> indicates some seriously broken compiler issues, but since variable
> length arrays are bad regardless, there's little point in trying to
> chase it down.
>
> "Just don't do that, then".
Since then any use of "variable length arrays" has become blasphemous.
Even in perfectly good, beautiful, perfectly safe code like the one
below where the variable length arrays are only used as a sizeof()
parameter, for type-safe dynamic structure allocations. GCC is not
executing any stack allocation code.
I have produced a small file which defines two functions main1(unsigned numdevs)
and main2(unsigned numdevs). main1 uses code as before with call to malloc
and main2 uses code as of after this patch. I compiled it as:
gcc -O2 -S see_asm.c
and here is what I get:
<see_asm.s>
main1:
.LFB7:
.cfi_startproc
mov %edi, %edi
leaq 4(%rdi,%rdi), %rdi
salq $3, %rdi
jmp malloc
.cfi_endproc
.LFE7:
.size main1, .-main1
.p2align 4,,15
.globl main2
.type main2, @function
main2:
.LFB8:
.cfi_startproc
mov %edi, %edi
addq $2, %rdi
salq $4, %rdi
jmp malloc
.cfi_endproc
.LFE8:
.size main2, .-main2
.section .text.startup,"ax",@progbits
.p2align 4,,15
</see_asm.s>
*Exact* same code !!!
So please seriously consider not accepting this patch and leave the
perfectly good code intact.
CC: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Those flags are supposed to be set by NFS readdir() to tell ext3/ext4
to 32bit (NFSv2) or 64bit hash values (offsets) in seekdir().
Signed-off-by: Bernd Schubert <bernd.schubert@itwm.fraunhofer.de>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In commit 5ffaf85541 "NFS: replace global bl_wq with per-net one" we
made "msg" a pointer instead of a struct stored in stack memory. But we
forgot to change the memset() here so we're still clearing stack memory
instead clearing the struct like we intended. It will lead to a kernel
crash.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Replace the variable length array in the RPCSEC_GSS crypto code with
a fixed length one. The size should be bounded by the variable
GSS_KRB5_MAX_BLOCKSIZE, so use that.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This function could fail to queue the upcall if rpc.idmapd is not running,
causing a warning message to be printed. Instead, I want to check the
return value and revoke the key if the upcall can't be run.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Now that the nfs4_cb_match_client() function is static, gcc notices that
it is only used when CONFIG_NFS_V4_1 is enabled.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
net/sunrpc/svcsock.c:412:22: warning: incorrect type in assignment
(different address spaces)
- svc_partial_recvfrom now takes a struct kvec, so the variable
save_iovbase needs to be an ordinary (void *)
Make a bunch of variables in net/sunrpc/xprtsock.c static
Fix a couple of "warning: symbol 'foo' was not declared. Should it be
static?" reports.
Fix a couple of conflicting function declarations.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Fix a number of "warning: symbol 'foo' was not declared. Should it be
static?" conditions.
Fix 2 cases of "warning: Using plain integer as NULL pointer"
fs/nfs/delegation.c:263:31: warning: restricted fmode_t degrades to integer
- We want to allow upgrades to a WRITE delegation, but should otherwise
consider servers that hand out duplicate delegations to be borken.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This queue is used for sleeping in kernel and it have to be per-net since we
don't want to wake any other waiters except in out network nemespace.
BTW, move wq to per-net data is easy. But some way to handle upcall timeouts
have to be provided. On message destroy in case of timeout, tasks, waiting for
message to be delivered, should be awakened. Thus, some data required to
located the right wait queue. Chosen solution replaces rpc_pipe_msg object with
new introduced bl_pipe_msg object, containing rpc_pipe_msg and proper wq.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This global variable is used for blocklayout downcall and thus can be corrupted
if case of existence of multiple networks namespaces.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Trond Myklebust
Fred Isaman
J. Bruce Fields
Bernd Schubert
Fan Yong
Sachin Prabhu
William Dauchy
Boaz Harrosh
Dan Carpenter
Bryan Schumaker
Stanislav Kinsbursky