Pull ARM SoC fixes from Olof Johansson:
"People are back from the holiday breaks, and it shows. Here are a
bunch of fixes for a number of platforms:
- A couple of small fixes for Nomadik
- A larger set of changes for kirkwood/mvebu
- uart driver selection, dt clocks, gpio-poweroff fixups, a few
__init annotation fixes and some error handling improvement in
their xor dma driver.
- i.MX had a couple of minor fixes (and a critical one for flexcan2
clock setup)
- MXS has a small board fix and a framebuffer bugfix
- A set of fixes for Samsung Exynos, fixing default bootargs and some
Exynos5440 clock issues
- A set of OMAP changes including PM fixes and a few sparse warning
fixups
All in all a bit more positive code delta than we'd ideally want to
see here, mostly from the OMAP PM changes, but nothing overly crazy."
* tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits)
ARM: clps711x: Fix bad merge of clockevents setup
ARM: highbank: save and restore L2 cache and GIC on suspend
ARM: highbank: add a power request clear
ARM: highbank: fix secondary boot and hotplug
ARM: highbank: fix typos with hignbank in power request functions
ARM: dts: fix highbank cpu mpidr values
ARM: dts: add device_type prop to cpu nodes on Calxeda platforms
ARM: mx5: Fix MX53 flexcan2 clock
ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs array
pinctrl: mvebu: make pdma clock on dove mandatory
ARM: Dove: Add pinctrl clock to DT
dma: mv_xor: fix error handling for clocks
dma: mv_xor: fix error handling of mv_xor_channel_add()
arm: mvebu: Add missing ; for cpu node.
arm: mvebu: Armada XP MV78230 has only three Ethernet interfaces
arm: mvebu: Armada XP MV78230 has two cores, not one
clk: mvebu: Remove inappropriate __init tagging
ARM: Kirkwood: Use fixed-regulator instead of board gpio call
ARM: Kirkwood: Fix missing sdio clock
ARM: Kirkwood: Switch TWSI1 of 88f6282 to DT clock providers
...
The VDCTRL4 register does not provide the MXS SET/CLR/TOGGLE feature.
The write in mxsfb_disable_controller() sets the data_cnt for the LCD
DMA to 0 which obviously means the max. count for the LCD DMA and
leads to overwriting arbitrary memory when the display is unblanked.
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Acked-by: Juergen Beisert <jbe@pengutronix.de>
Tested-by: Lauri Hintsala <lauri.hintsala@bluegiga.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
CONFIG_HOTPLUG is going away as an option. As a result, the __dev*
markings need to be removed.
This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from these drivers.
Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.
Cc: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the checkpatch error and warning as below:
WARNING: space prohibited between function name and open parenthesis '('
ERROR: trailing statements should be on next line
Also, long comments are fixed for the preferred style and unnecessary
lines are removed.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull powerpc update from Benjamin Herrenschmidt:
"The main highlight is probably some base POWER8 support. There's more
to come such as transactional memory support but that will wait for
the next one.
Overall it's pretty quiet, or rather I've been pretty poor at picking
things up from patchwork and reviewing them this time around and Kumar
no better on the FSL side it seems..."
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (73 commits)
powerpc+of: Rename and fix OF reconfig notifier error inject module
powerpc: mpc5200: Add a3m071 board support
powerpc/512x: don't compile any platform DIU code if the DIU is not enabled
powerpc/mpc52xx: use module_platform_driver macro
powerpc+of: Export of_reconfig_notifier_[register,unregister]
powerpc/dma/raidengine: add raidengine device
powerpc/iommu/fsl: Add PAMU bypass enable register to ccsr_guts struct
powerpc/mpc85xx: Change spin table to cached memory
powerpc/fsl-pci: Add PCI controller ATMU PM support
powerpc/86xx: fsl_pcibios_fixup_bus requires CONFIG_PCI
drivers/virt: the Freescale hypervisor driver doesn't need to check MSR[GS]
powerpc/85xx: p1022ds: Use NULL instead of 0 for pointers
powerpc: Disable relocation on exceptions when kexecing
powerpc: Enable relocation on during exceptions at boot
powerpc: Move get_longbusy_msecs into hvcall.h and remove duplicate function
powerpc: Add wrappers to enable/disable relocation on exceptions
powerpc: Add set_mode hcall
powerpc: Setup relocation on exceptions for bare metal systems
powerpc: Move initial mfspr LPCR out of __init_LPCR
powerpc: Add relocation on exception vector handlers
...
Changing backlight intensity on an Akita (Sharp Zaurus C-1000) triggers
WARN_ON message:
WARNING: at drivers/gpio/gpiolib.c:1672 __gpio_set_value+0x38/0xa4()
Modules linked in:
Backtrace:
corgi_bl_set_intensity+0x0/0x74
corgi_bl_update_status+0x0/0x64
corgi_lcd_probe+0x0/0x258
spi_drv_probe+0x0/0x24
driver_probe_device+0x0/0x208
__driver_attach+0x0/0x94
bus_for_each_dev+0x0/0x90
driver_attach+0x0/0x28
bus_add_driver+0x0/0x22c
driver_register+0x0/0x134
spi_register_driver+0x0/0x60
corgi_lcd_driver_init+0x0/0x1c
do_one_initcall+0x0/0x174
kernel_init+0x0/0x2a8
Akita machines have backlight controls hooked to a gpio expander chip,
max7310 using i2c transfers which can sleep. In this case,
pca953x_gpio_set_value() can be called to control gpio, and
pca953x_setup_gpio() sets can_sleep flag. Therefore,
gpio_set_value_cansleep() should be used in order to avoid WARN_ON on
akita machines.
Akita is the only exception in this case since other users of corgi_lcd
access backlight gpio controls through a different gpio expander which
does not set the can_sleep flag.
Signed-off-by: Marko Katic <dromede@gmail.com>
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
GPIOF_DIR_OUT and GPIOF_DIR_IN are defined as below:
GPIOF_DIR_OUT (0 << 0)
GPIOF_DIR_IN (1 << 0)
So, when !pdata->reset_inverted is 1, the gpio pin can be set as
input, instead of output.
To prevent this problem, GPIOF_INIT flag should be used when using
devm_gpio_request_one().
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Previously, when ops functions cannot be called, lcd_show_contrast() and
lcd_store_contrast() returned 0, instead of ENXIO.
Thus, in this case, a local variable 'rc' for return value should be
initialized as ENXIO, after kstrtoul() is called.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove an unnecessary line continuation in pm860x_backlight_probe().
Also, a checkpatch warning is fixed as below:
WARNING: Avoid unnecessary line continuations
[akpm@linux-foundation.org: remove newline]
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This function finds the struct backlight_device for a given device tree
node. A dummy function is provided so that it safely compiles out if OF
support is disabled.
[akpm@linux-foundation.org: Don't use IS_ENABLED(CONFIG_OF)]
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Thierry Reding <thierry.reding@avionic-design.de>
Reviewed-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
devm_kfree() allocates memory that is released when a driver detaches.
Thus, there is no reason to explicitly call devm_kfree in probe or remove
functions.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
devm_kfree() allocates memory that is released when a driver detaches.
Thus, there is no reason to explicitly call devm_kfree() in probe or remove
functions.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The LP855x family devices support the PWM input for the backlight control.
Period of the PWM is configurable in the platform side. Platform
specific functions are unnecessary anymore because generic PWM functions
are used inside the driver.
(PWM input mode)
To set the brightness, new lp855x_pwm_ctrl() is used.
If a PWM device is not allocated, devm_pwm_get() is called.
The PWM consumer name is from the chip name such as 'lp8550' and 'lp8556'.
To get the brightness value, no additional handling is required.
Just the value of 'props.brightness' is returned.
If the PWM driver is not ready while initializing the LP855x driver, it's
OK. The PWM device can be retrieved later, when the brightness value is
changed.
Documentation is updated with an example.
[akpm@linux-foundation.org: coding-style simplification, per Thierry]
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Cc: Thierry Reding <thierry.reding@avionic-design.de>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Bryan Wu <bryan.wu@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Maxime Ripard
Linus Torvalds
Lothar Waßmann
Greg Kroah-Hartman
Jingoo Han
Marko Katic
Peter Ujfalusi
Thierry Reding
Axel Lin
Kim, Milo