Now that rpc_run_task() is the sole entry point for RPC calls, we can move
the remaining rpc_client-related initialisation of struct rpc_task from
sched.c into clnt.c.
Also move rpc_killall_tasks() into the same file, since that too is
relative to the rpc_clnt.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Both rpc_restart_call_prepare() and rpc_restart_call() test for the
RPC_TASK_KILLED flag, and fail to restart the RPC call if that flag is set.
This patch allows callers to know whether or not the restart was
successful, so that they can perform cleanups etc in case of failure.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1674 commits)
qlcnic: adding co maintainer
ixgbe: add support for active DA cables
ixgbe: dcb, do not tag tc_prio_control frames
ixgbe: fix ixgbe_tx_is_paused logic
ixgbe: always enable vlan strip/insert when DCB is enabled
ixgbe: remove some redundant code in setting FCoE FIP filter
ixgbe: fix wrong offset to fc_frame_header in ixgbe_fcoe_ddp
ixgbe: fix header len when unsplit packet overflows to data buffer
ipv6: Never schedule DAD timer on dead address
ipv6: Use POSTDAD state
ipv6: Use state_lock to protect ifa state
ipv6: Replace inet6_ifaddr->dead with state
cxgb4: notify upper drivers if the device is already up when they load
cxgb4: keep interrupts available when the ports are brought down
cxgb4: fix initial addition of MAC address
cnic: Return SPQ credit to bnx2x after ring setup and shutdown.
cnic: Convert cnic_local_flags to atomic ops.
can: Fix SJA1000 command register writes on SMP systems
bridge: fix build for CONFIG_SYSFS disabled
ARCNET: Limit com20020 PCI ID matches for SOHARD cards
...
Fix up various conflicts with pcmcia tree drivers/net/
{pcmcia/3c589_cs.c, wireless/orinoco/orinoco_cs.c and
wireless/orinoco/spectrum_cs.c} and feature removal
(Documentation/feature-removal-schedule.txt).
Also fix a non-content conflict due to pm_qos_requirement getting
renamed in the PM tree (now pm_qos_request) in net/mac80211/scan.c
This patch removes from net/ (but not any netfilter files)
all the unnecessary return; statements that precede the
last closing brace of void functions.
It does not remove the returns that are immediately
preceded by a label as gcc doesn't like that.
Done via:
$ grep -rP --include=*.[ch] -l "return;\n}" net/ | \
xargs perl -i -e 'local $/ ; while (<>) { s/\n[ \t\n]+return;\n}/\n}/g; print; }'
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently rpc_run_bc_task() will return NULL if the task allocation failed.
However the only caller is bc_send, which assumes that the return value
will be an ERR_PTR.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Introduce soft connect behavior for UDP transports. In this case, a
major timeout returns ETIMEDOUT instead of EIO.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently, if a remote RPC service is unreachable, an RPC ping will
hang until the underlying transport connect attempt times out. A more
desirable behavior might be to have the ping fail immediately so upper
layers can recover appropriately.
In the case of an NFS mount, for instance, this would mean the
mount(2) system call could fail immediately if the server isn't
listening, rather than hanging uninterruptibly for more than 3
minutes.
Change rpc_ping() so that it fails immediately for connection-oriented
transports. rpc_create() will then fail immediately for such
transports if an RPC ping was requested.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Autobinding is handled by the rpciod process, not in user processes
that are generating regular RPC requests. Thus autobinding is usually
not affected by signals targetting user processes, such as KILL or
timer expiration events.
In addition, an RPC request generated by a user process that has
RPC_TASK_SOFTCONN set and needs to perform an autobind will hang if
the remote rpcbind service is not available.
For rpcbind queries on connection-oriented transports, let's use the
new soft connect semantic to return control to the user's process
quickly, if the kernel's rpcbind client can't connect to the remote
rpcbind service.
Logic is introduced in call_bind_status() to handle connection errors
that occurred during an asynchronous rpcbind query. The logic
abandons the rpcbind query if the RPC request has SOFTCONN set, and
retries after a few seconds in the normal case.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The kernel sometimes makes RPC calls to services that aren't running.
Because the kernel's RPC client always assumes the hard retry semantic
when reconnecting a connection-oriented RPC transport, the underlying
reconnect logic takes a long while to time out, even though the remote
may have responded immediately with ECONNREFUSED.
In certain cases, like upcalls to our local rpcbind daemon, or for NFS
mount requests, we'd like the kernel to fail immediately if the remote
service isn't reachable. This allows another transport to be tried
immediately, or the pending request can be abandoned quickly.
Introduce a per-request flag which controls how call_transmit_status()
behaves when request transmission fails because the server cannot be
reached.
We don't want soft connection semantics to apply to other errors. The
default case of the switch statement in call_transmit_status() no
longer falls through; the fall through code is copied to the default
case, and a "break;" is added.
The transport's connection re-establishment timeout is also ignored for
such requests. We want the request to fail immediately, so the
reconnect delay is skipped. Additionally, we don't want a connect
failure here to further increase the reconnect timeout value, since
this request will not be retried.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The success case, where task->tk_status == 0, is by far the most
frequent case in call_transmit_status().
The default: arm of the switch statement in call_transmit_status()
handles the 0 case. default: was moved close to the top of the switch
statement in call_transmit_status() under the theory that the compiler
places object code for the earliest arms of a switch statement first,
making the CPU do less work.
The default: arm of a switch statement, however, is executed only
after all the other cases have been checked. Even if the compiler
rearranges the object code, the default: arm is the "last resort",
meaning all of the other cases have been explicitly exhausted. That
makes the current arrangement about as inefficient as it gets for the
common case.
To fix this, add an explicit check for zero before the switch
statement. That forces the compiler to do the zero check first, no
matter what optimizations it might try to do to the switch statement.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* 'for-2.6.32' of git://linux-nfs.org/~bfields/linux: (68 commits)
nfsd4: nfsv4 clients should cross mountpoints
nfsd: revise 4.1 status documentation
sunrpc/cache: avoid variable over-loading in cache_defer_req
sunrpc/cache: use list_del_init for the list_head entries in cache_deferred_req
nfsd: return success for non-NFS4 nfs4_state_start
nfsd41: Refactor create_client()
nfsd41: modify nfsd4.1 backchannel to use new xprt class
nfsd41: Backchannel: Implement cb_recall over NFSv4.1
nfsd41: Backchannel: cb_sequence callback
nfsd41: Backchannel: Setup sequence information
nfsd41: Backchannel: Server backchannel RPC wait queue
nfsd41: Backchannel: Add sequence arguments to callback RPC arguments
nfsd41: Backchannel: callback infrastructure
nfsd4: use common rpc_cred for all callbacks
nfsd4: allow nfs4 state startup to fail
SUNRPC: Defer the auth_gss upcall when the RPC call is asynchronous
nfsd4: fix null dereference creating nfsv4 callback client
nfsd4: fix whitespace in NFSPROC4_CLNT_CB_NULL definition
nfsd41: sunrpc: add new xprt class for nfsv4.1 backchannel
sunrpc/cache: simplify cache_fresh_locked and cache_fresh_unlocked.
...
There is still a little wart or two there: Since we've already got a
vfsmount, we might as well pass that in to rpc_create_client_dir.
Another point is that if we open code __rpc_lookup_path() here, then we can
avoid looking up the entire parent directory path over and over again: it
doesn't change.
Also get rid of rpc_clnt->cl_pathname, since it has no users...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This reflects the fact that rpc_mkdir() as it stands today, can only create
a RPC client type directory.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* Remove smp_lock.h from files which don't need it (including some headers!)
* Add smp_lock.h to files which do need it
* Make smp_lock.h include conditional in hardirq.h
It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT
This will make hardirq.h inclusion cheaper for every PREEMPT=n config
(which includes allmodconfig/allyesconfig, BTW)
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The 'rq_received' member of 'struct rpc_rqst' is used to track when we
have received a reply to our request. With v4.1, the backchannel
can now accept callback requests over the existing connection. Rename
this field to make it clear that it is only used for tracking reply bytes
and not all bytes received on the connection.
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Adds rpc_run_bc_task() which is called by the NFS callback service to
process backchannel requests. It performs similar work to rpc_run_task()
though "schedules" the backchannel task to be executed starting at the
call_trasmit state in the RPC state machine.
It also introduces some miscellaneous updates to the argument validation,
call_transmit, and transport cleanup functions to take into account
that there are now forechannel and backchannel tasks.
Backchannel requests do not carry an RPC message structure, since the
payload has already been XDR encoded using the existing NFSv4 callback
mechanism.
Introduce a new transmit state for the client to reply on to backchannel
requests. This new state simply reserves the transport and issues the
reply. In case of a connection related error, disconnects the transport and
drops the reply. It requires the forechannel to re-establish the connection
and the server to retransmit the request, as stated in NFSv4.1 section
2.9.2 "Client and Server Transport Behavior".
Note: There is no need to loop attempting to reserve the transport. If EAGAIN
is returned by xprt_prepare_transmit(), return with tk_status == 0,
setting tk_action to call_bc_transmit. rpc_execute() will invoke it again
after the task is taken off the sleep queue.
[nfs41: rpc_run_bc_task() need not be exported outside RPC module]
[nfs41: New call_bc_transmit RPC state]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: Backchannel: No need to loop in call_bc_transmit()]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[rpc_count_iostats incorrectly exits early]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[Convert rpc_reply_expected() to inline function]
[Remove unnecessary BUG_ON()]
[Rename variable]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Reading and storing the RPC direction is a three step process.
1. xs_tcp_read_calldir() reads the RPC direction, but it will not store it
in the XDR buffer since the 'struct rpc_rqst' is not yet available.
2. The 'struct rpc_rqst' is obtained during the TCP_RCV_COPY_DATA state.
This state need not necessarily be preceeded by the TCP_RCV_READ_CALLDIR.
For example, we may be reading a continuation packet to a large reply.
Therefore, we can't simply obtain the 'struct rpc_rqst' during the
TCP_RCV_READ_CALLDIR state and assume it's available during TCP_RCV_COPY_DATA.
This patch adds a new TCP_RCV_READ_CALLDIR flag to indicate the need to
read the RPC direction. It then uses TCP_RCV_COPY_CALLDIR to indicate the
RPC direction needs to be saved after the 'struct rpc_rqst' has been allocated.
3. The 'struct rpc_rqst' is obtained by the xs_tcp_read_data() helper
functions. xs_tcp_read_common() then saves the RPC direction in the XDR
buffer if TCP_RCV_COPY_CALLDIR is set. This will happen when we're reading
the data immediately after the direction was read. xs_tcp_read_common()
then clears this flag.
[was nfs41: Skip past the RPC call direction]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: sunrpc: Add RPC direction back into the XDR buffer]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: sunrpc: Don't skip past the RPC call direction]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Trond Myklebust
Linus Torvalds
Joe Perches
Chuck Lever
Jaswinder Singh Rajput
Alexandros Batsakis
Alexey Dobriyan
Ricardo Labiaga
Andy Adamson