It can get exynos_gem object via function argument, so no need to call
exynos_drm_fb_gem_obj() in exynos_drm_fbdev_update.
It also can get struct drm_framebuffer *fb via helper->fb, so can remove
a function argument for it.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The variable name "exynos_gem_obj" is too long, so some lines exceed 80
characters. It's simple to use "obj" instead of "exynos_gem_obj".
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The exynos_drm_fb_set_buf_cnt() is used to set buffer count only in
exynos_drm_fbdev_update(). This patch sets directly buffer count in
exynos_drm_framebuffer_init() without using exynos_drm_fb_set_buf_cnt(),
so there is no any reason to keep exynos_drm_fb_set_buf_cnt().
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The size check was incomplete. It only computed the
size of area of the drawing rectangle and checked if
the size still fit inside the buffer.
The correct check is to compute the position of the
last byte that the G2D engine is going to access and
then check if that position is still contained in the
buffer. In particular we need the stride information
to determine this.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Use port_clock instead of link_bw when picking the PLL parameters for
DP. link_bw may be zero with an eDP 1.4 sink that supports
DP_LINK_RATE_SET so we shouldn't use it for anything other than feed it
to the sink appropriately.
v2: Fix typo in commit message (Sivakumar)
Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[Jani: cherry-picked from future.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Applications like gnome-shell may try to render after dropping master
privileges. Since the driver should now be safe against this scenario,
allow those applications to use their legacy node like a render node.
v2: Add missing return statement.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Commit 92122789b2 ("drm/i915: preserve SSC if previously set v3")
added code to intel_modeset_gem_init to override the SSC status read
from VBT with the SSC status set by BIOS.
However, intel_modeset_gem_init is invoked *after* intel_modeset_init,
which calls intel_setup_outputs, which *modifies* SSC status by way of
intel_init_pch_refclk. So unlike advertised, intel_modeset_gem_init
doesn't preserve the SSC status set by BIOS but whatever
intel_init_pch_refclk decided on.
This is a problem on dual gpu laptops such as the MacBook Pro which
require either a handler to switch DDC lines, or the discrete gpu
to proxy DDC/AUX communication: Both the handler and the discrete
gpu may initialize after the i915 driver, and consequently, an LVDS
connector may initially seem disconnected and the SSC therefore
is disabled by intel_init_pch_refclk, but on reprobe the connector
may turn out to be connected and the SSC must then be enabled.
Due to 92122789b2 however, the SSC is not enabled on reprobe since
it is assumed BIOS disabled it while in fact it was disabled by
intel_init_pch_refclk.
Also, because the SSC status is preserved so late, the preserved value
only ever gets used on resume but not on panel initialization:
intel_modeset_init calls intel_init_display which indirectly calls
intel_panel_use_ssc via multiple subroutines, *before* the BIOS value
overrides the VBT value in intel_modeset_gem_init (intel_panel_use_ssc
is the sole user of dev_priv->vbt.lvds_use_ssc).
Fix this by moving the code introduced by 92122789b2 from
intel_modeset_gem_init to intel_modeset_init before the invocation
of intel_setup_outputs and intel_init_display.
Add a DRM_DEBUG_KMS as suggested way back by Jani:
http://lists.freedesktop.org/archives/intel-gfx/2014-June/046666.html
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115
Tested-by: Paul Hordiienko <pvt.gord@gmail.com>
[MBP 6,2 2010 intel ILK + nvidia GT216 pre-retina]
Tested-by: William Brown <william@blackhats.net.au>
[MBP 8,2 2011 intel SNB + amd turks pre-retina]
Tested-by: Lukas Wunner <lukas@wunner.de>
[MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina]
Tested-by: Bruno Bierbaumer <bruno@bierbaumer.net>
[MBP 11,3 2013 intel HSW + nvidia GK107 retina -- work in progress]
Fixes: 92122789b2 ("drm/i915: preserve SSC if previously set v3")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
From B spec, DDI_E port belong to PowerWell 2, but
DDI_E share the powerwell_req/staus register bit with
DDI_A which belong to DDI_A_E_POWER_WELL.
In order to communicate with the connector on DDI-E, both
DDI_A_E_POWER_WELL and POWER_WELL_2 must be enabled.
Currently intel_dp_power_get(DDI_E) only enable
DDI_A_E_POWER_WELL, this patch will not only enable
DDI_a_E_POWER_WELL but also enable POWER_WELL_2.
This patch also fix the DDI-E hotplug function.
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
AUX addresses are 20 bits long. Send out the entire address instead of
just the low 16 bits.
Port of:
drm/radeon/atom: Send out the full AUX address
to radeon non-atom aux path
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
There are OEMs using DDI-E out there,
so let's enable it.
Unfortunately there is no detection bit for DDI-E
So we need to rely on VBT for that.
I also need to give credits to Xiong since before seing
his approach to check info->support_* I was creating an ugly
vbt->ddie_sfuse_strap in order to propagate the ddi presence info
v2: Rebased as last patch in the series. since all other patches
in this series are needed for anything working propperly on DDI-E.
Credits-to: "Zhang, Xiong Y" <xiong.y.zhang@intel.com>
Cc: "Zhang, Xiong Y" <xiong.y.zhang@intel.com>
Reviewed-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
DDI-E doesn't have the correspondent GMBUS pin.
We rely on VBT to tell us which one it being used instead.
The DVI/HDMI on shared port couldn't exist.
This patch isn't tested without hardware wchich has HDMI
on DDI-E.
v2: fix trailing whitespace
v3: MISSING_CASE take place of BUG()
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
This is a second pull-request which adds last part of
atomic modeset/pageflip support, render node support,
clean-up, and fix-up.
* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm/exynos: fix build warning to exynos_drm_gem.c
drm/exynos: Properly report supported formats for each device
drm/exynos: add render node support
drm/exynos: implement atomic_{begin/flush} of DECON
drm/exynos: remove legacy ->suspend()/resume()
drm/exynos: Enable atomic modesetting feature
drm/exynos: remove wait queue for pending page flip
drm/exynos: wait all planes updates to finish
drm/exynos: add atomic asynchronous commit
drm/exynos: fimd: only finish update if START == START_S
drm/exynos: add macro to get the address of START_S reg
drm/exynos: check for pending fb before finish update
drm/exynos: fimd: move window protect code to prepare/cleanup_plane
drm/exynos: add prepare and cleanup phases for planes
drm/exynos: fimd: unify call to exynos_drm_crtc_finish_pageflip()
drm/exynos: don't track enabled state at exynos_crtc
Some i915 fixes headed for v4.3. SKL DDI-E is a wip, but here's the
first in a series.
* tag 'drm-intel-next-fixes-2015-08-28' of git://anongit.freedesktop.org/drm-intel:
drm/i915/skl: enable DDI-E hotplug
drm/i915: Fix build warning on 32-bit
drm/i915/skl: Update DDI buffer translation programming.
drm/i915: Allow parsing of variable size child device entries from VBT
drm/i915: fix link rates reported for SKL
drm/i915: fix VBT parsing for SDVO child device mapping
Just one small fix before 4.3 merge window:
- Use linux/mman.h instead of uapi's mman-common.h inside the driver.
* tag 'drm-amdkfd-next-fixes-2015-08-30' of git://people.freedesktop.org/~gabbayo/linux:
amdkfd: use <linux/mman.h> instead of <uapi/asm-generic/mman-common.h>
Exynos DRM reported that all planes for all supported sub-devices supports
only three pixel formats: XRGB24, ARGB24 and NV12. This patch lets each
Exynos DRM sub-drivers to provide the list of supported pixel formats
and registers this list to DRM core.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch allows clients who want to use render node to access
rendering relevant ioctls - g2d, post processor and gem allocation.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Each CRTC's atomic_{begin/flush} must stop/start the update of shadow
registers to active register in the functions. This patch achieves these
purpose by moving the setting of protection bits to those functions from
decon_update_plane.
v2: rebased to the branch exynos-drm-next
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Joonyoung Shim
Tobias Jakobi
Ander Conselvan de Oliveira
Ville Syrjälä
Thomas Hellstrom
Lukas Wunner
Xiong Zhang
Alex Deucher
Rodrigo Vivi
Imre Deak
Dave Airlie
Inki Dae
Marek Szyprowski
Hyungwon Hwang