scatterwalk_done() is only meant to be called after a nonzero number of
bytes have been processed, since scatterwalk_pagedone() will flush the
dcache of the *previous* page. But in the error case of
skcipher_walk_done(), e.g. if the input wasn't an integer number of
blocks, scatterwalk_done() was actually called after advancing 0 bytes.
This caused a crash ("BUG: unable to handle kernel paging request")
during '!PageSlab(page)' on architectures like arm and arm64 that define
ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE, provided that the input was
page-aligned as in that case walk->offset == 0.
Fix it by reorganizing skcipher_walk_done() to skip the
scatterwalk_advance() and scatterwalk_done() if an error has occurred.
This bug was found by syzkaller fuzzing.
Reproducer, assuming ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE:
#include <linux/if_alg.h>
#include <sys/socket.h>
#include <unistd.h>
int main()
{
struct sockaddr_alg addr = {
.salg_type = "skcipher",
.salg_name = "cbc(aes-generic)",
};
char buffer[4096] __attribute__((aligned(4096))) = { 0 };
int fd;
fd = socket(AF_ALG, SOCK_SEQPACKET, 0);
bind(fd, (void *)&addr, sizeof(addr));
setsockopt(fd, SOL_ALG, ALG_SET_KEY, buffer, 16);
fd = accept(fd, NULL, NULL);
write(fd, buffer, 15);
read(fd, buffer, 15);
}
Reported-by: Liu Chao <liuchao741@huawei.com>
Fixes: b286d8b1a6 ("crypto: skcipher - Add skcipher walk interface")
Cc: <stable@vger.kernel.org> # v4.10+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Setting 'walk->nbytes = walk->total' in skcipher_walk_first() doesn't
make sense because actually walk->nbytes needs to be set to the length
of the first step in the walk, which may be less than walk->total. This
is done by skcipher_walk_next() which is called immediately afterwards.
Also walk->nbytes was already set to 0 in skcipher_walk_skcipher(),
which is a better default value in case it's forgotten to be set later.
Therefore, remove the unnecessary assignment to walk->nbytes.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
All callers pass chain=0 to scatterwalk_crypto_chain().
Remove this unneeded parameter.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The ALIGN() macro needs to be passed the alignment, not the alignmask
(which is the alignment minus 1).
Fixes: b286d8b1a6 ("crypto: skcipher - Add skcipher walk interface")
Cc: <stable@vger.kernel.org> # v4.10+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Avoid RCU stalls in the case of non-preemptible kernel and lengthy
speed tests by rescheduling when advancing from one block size
to another.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Make use of the swap macro and remove unnecessary variable *tmp*.
This makes the code easier to read and maintain.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Make use of the swap macro and remove unnecessary variable *tmp*.
This makes the code easier to read and maintain.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix the b value to be compliant with FIPS 186-4 D.1.2.1. This fix is
required to make sure the SP800-56A public key test passes for P-192.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
By adding a zero byte-length for the DH parameter Q value, the public
key verification test is disabled for the given test.
Reported-by: Eric Biggers <ebiggers3@gmail.com>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CTR DRBG requires two SGLs pointing to input/output buffers for the
CTR AES operation. The used SGLs always have only one entry. Thus, the
SGL can be initialized during allocation time, preventing a
re-initialization of the SGLs during each call.
The performance is increased by about 1 to 3 percent depending on the
size of the requested buffer size.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In case memory resources for *base* were allocated, release them
before return.
Addresses-Coverity-ID: 1471702 ("Resource leak")
Fixes: e3fe0ae129 ("crypto: dh - add public key verification test")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Stephan Müller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto fix from Herbert Xu:
"This fixes an allocation error-path bug in af_alg discovered by
syzkaller"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: af_alg - Initialize sg_num_bytes in error code path
The testmgr hash tests were testing init, digest, update and final
methods but not the finup method. Add a test for this one too.
While doing this, make sure we only run the partial tests once with
the digest tests and skip them with the final and finup tests since
they are the same.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some aead algorithms set .cra_flags = CRYPTO_ALG_TYPE_AEAD. But this is
redundant with the C structure type ('struct aead_alg'), and
crypto_register_aead() already sets the type flag automatically,
clearing any type flag that was already there. Apparently the useless
assignment has just been copy+pasted around.
So, remove the useless assignment from all the aead algorithms.
This patch shouldn't change any actual behavior.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Many shash algorithms set .cra_flags = CRYPTO_ALG_TYPE_SHASH. But this
is redundant with the C structure type ('struct shash_alg'), and
crypto_register_shash() already sets the type flag automatically,
clearing any type flag that was already there. Apparently the useless
assignment has just been copy+pasted around.
So, remove the useless assignment from all the shash algorithms.
This patch shouldn't change any actual behavior.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
sha512-generic and sha384-generic had a cra_priority of 0, so it wasn't
possible to have a lower priority SHA-512 or SHA-384 implementation, as
is desired for sha512_mb which is only useful under certain workloads
and is otherwise extremely slow. Change them to priority 100, which is
the priority used for many of the other generic algorithms.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
sha256-generic and sha224-generic had a cra_priority of 0, so it wasn't
possible to have a lower priority SHA-256 or SHA-224 implementation, as
is desired for sha256_mb which is only useful under certain workloads
and is otherwise extremely slow. Change them to priority 100, which is
the priority used for many of the other generic algorithms.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
sha1-generic had a cra_priority of 0, so it wasn't possible to have a
lower priority SHA-1 implementation, as is desired for sha1_mb which is
only useful under certain workloads and is otherwise extremely slow.
Change it to priority 100, which is the priority used for many of the
other generic algorithms.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
According to SP800-56A section 5.6.2.1, the public key to be processed
for the DH operation shall be checked for appropriateness. The check
shall covers the full verification test in case the domain parameter Q
is provided as defined in SP800-56A section 5.6.2.3.1. If Q is not
provided, the partial check according to SP800-56A section 5.6.2.3.2 is
performed.
The full verification test requires the presence of the domain parameter
Q. Thus, the patch adds the support to handle Q. It is permissible to
not provide the Q value as part of the domain parameters. This implies
that the interface is still backwards-compatible where so far only P and
G are to be provided. However, if Q is provided, it is imported.
Without the test, the NIST ACVP testing fails. After adding this check,
the NIST ACVP testing passes. Testing without providing the Q domain
parameter has been performed to verify the interface has not changed.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As of GCC 9.0.0 the build is reporting warnings like:
crypto/ablkcipher.c: In function ‘crypto_ablkcipher_report’:
crypto/ablkcipher.c:374:2: warning: ‘strncpy’ specified bound 64 equals destination size [-Wstringop-truncation]
strncpy(rblkcipher.geniv, alg->cra_ablkcipher.geniv ?: "<default>",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sizeof(rblkcipher.geniv));
~~~~~~~~~~~~~~~~~~~~~~~~~
This means the strnycpy might create a non null terminated string. Fix this by
explicitly performing '\0' termination.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Nick Desaulniers <nick.desaulniers@gmail.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
According to SP800-56A section 5.6.2.1, the public key to be processed
for the ECDH operation shall be checked for appropriateness. When the
public key is considered to be an ephemeral key, the partial validation
test as defined in SP800-56A section 5.6.2.3.4 can be applied.
The partial verification test requires the presence of the field
elements of a and b. For the implemented NIST curves, b is defined in
FIPS 186-4 appendix D.1.2. The element a is implicitly given with the
Weierstrass equation given in D.1.2 where a = p - 3.
Without the test, the NIST ACVP testing fails. After adding this check,
the NIST ACVP testing passes.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function skcipher_walk_next declared as static and marked as
EXPORT_SYMBOL_GPL. It's a bit confusing for internal function to be
exported. The area of visibility for such function is its .c file
and all other modules. Other *.c files of the same module can't use it,
despite all other modules can. Relying on the fact that this is the
internal function and it's not a crucial part of the API, the patch
just removes the EXPORT_SYMBOL_GPL marking of skcipher_walk_next.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eric Biggers
Horia Geantă
Stephan Müller
Herbert Xu
Gustavo A. R. Silva
Linus Torvalds
Gilad Ben-Yossef
Stafford Horne
Denis Efremov