Commit Graph

18000 Commits

Author SHA1 Message Date
Linus Torvalds f885b51967 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Fix boot failure on POWER6
  [POWERPC] Workaround for iommu page alignment
2008-01-15 08:01:48 -08:00
Mike Frysinger d43a3312c7 x86: asm-x86/msr.h: pull in linux/types.h
Since the msr.h header uses types like __u32, it should pull in linux/types.h.

[ mingo@elte.hu: affects user-space that includes this header. We dont
  actually like user-space including raw kernel headers but it's a
  longstanding practice and it's easy for the kernel to be nice about
  this. ]

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-15 16:44:38 +01:00
Paul Mackerras dfbe0d3b6b [POWERPC] Fix boot failure on POWER6
Commit 473980a993 added a call to clear
the SLB shadow buffer before registering it.  Unfortunately this means
that we clear out the entries that slb_initialize has previously set in
there.  On POWER6, the hypervisor uses the SLB shadow buffer when doing
partition switches, and that means that after the next partition switch,
each non-boot CPU has no SLB entries to map the kernel text and data,
which causes it to crash.

This fixes it by reverting most of 473980a9 and instead clearing the
3rd entry explicitly in slb_initialize.  This fixes the problem that
473980a9 was trying to solve, but without breaking POWER6.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-15 17:30:58 +11:00
Linus Torvalds c60ecec67a Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Cacheops.h: Fix typo.
  [MIPS] Cobalt: Qube1 has no serial port so don't use it
  [MIPS] Cobalt: Fix ethernet interrupts for RaQ1
  [MIPS] Kconfig fixes for BCM47XX platform
2008-01-14 21:25:39 -08:00
Linus Torvalds c23f72cae9 Revert "writeback: introduce writeback_control.more_io to indicate more io"
This reverts commit 2e6883bdf4, as
requested by Fengguang Wu.  It's not quite fully baked yet, and while
there are patches around to fix the problems it caused, they should get
more testing.  Says Fengguang: "I'll resend them both for -mm later on,
in a more complete patchset".

See

	http://bugzilla.kernel.org/show_bug.cgi?id=9738

for some of this discussion.

Requested-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-14 21:21:29 -08:00
Ralf Baechle 2e4f95822c [MIPS] Cacheops.h: Fix typo.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-15 01:04:42 +00:00
Linus Torvalds 031f2dcd70 Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  i2c-sibyte: Fix an error path
  i2c: Driver IDs are optional
  i2c: Spelling fixes
  i2c-omap: Fix NULL pointer dereferencing
2008-01-14 13:23:20 -08:00
Jean Delvare f9dd0194ff i2c: Driver IDs are optional
Document the fact that I2C driver IDs are optional.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-14 21:53:31 +01:00
Jesper Nilsson 3ea0345be3 CRIS: define __ARCH_WANT_SYS_RT_SIGSUSPEND in unistd.h for CRIS
This allows us to use the commong sys_rt_sigsuspend instead of
having our own.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Mikael Starvik <mikael.starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-14 08:52:23 -08:00
Linus Torvalds 1a1b285c24 Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] vfp: fix fuitod/fsitod instructions
  [ARM] pxa: silence warnings from cpu_is_xxx() macros
2008-01-13 10:03:10 -08:00
Linus Torvalds fd4be699b5 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Fix CPU hotplug when using the SLB shadow buffer
  [POWERPC] efika: add phy-handle property for fec_mpc52xx
2008-01-13 10:01:45 -08:00
Linus Torvalds 417009f64f Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  pnpacpi: print resource shortage message only once
  PM: ACPI and APM must not be enabled at the same time
  ACPI: apply quirk_ich6_lpc_acpi to more ICH8 and ICH9
  ACPICA: fix acpi_serialize hang regression
  ACPI : Not register gsi for PCI IDE controller in legacy mode
  ACPI: Reintroduce run time configurable max_cstate for !CPU_IDLE case
  ACPI: Make sysfs interface in ACPI power optional.
  ACPI: EC: Enable boot EC before bus_scan
  increase PNP_MAX_PORT to 40 from 24
2008-01-13 09:58:22 -08:00
Roland McGrath 84427eaef1 remove task_ppid_nr_ns
task_ppid_nr_ns is called in three places.  One of these should never
have called it.  In the other two, using it broke the existing
semantics.  This was presumably accidental.  If the function had not
been there, it would have been much more obvious to the eye that those
patches were changing the behavior.  We don't need this function.

In task_state, the pid of the ptracer is not the ppid of the ptracer.

In do_task_stat, ppid is the tgid of the real_parent, not its pid.
I also moved the call outside of lock_task_sighand, since it doesn't
need it.

In sys_getppid, ppid is the tgid of the real_parent, not its pid.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-13 09:56:43 -08:00
Linus Torvalds 5d0381e21e Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.24
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.24:
  sh: Force __access_ok() to obey address space limit.
  sh: Fix argument page dcache flushing regression.
2008-01-11 11:48:59 -08:00
Len Brown 6b74c92521 Pull bugzilla-9535 into release branch 2008-01-11 12:27:50 -05:00
Len Brown 02d5bccf8e Pull bugzilla-9194 into release branch 2008-01-11 12:27:13 -05:00
Len Brown 9f9adecd2d PM: ACPI and APM must not be enabled at the same time
ACPI and APM used "pm_active" to guarantee that
they would not be simultaneously active.

But pm_active was recently moved under CONFIG_PM_LEGACY,
so that without CONFIG_PM_LEGACY, pm_active became a NOP --
allowing ACPI and APM to both be simultaneously enabled.
This caused unpredictable results, including boot hangs.

Further, the code under CONFIG_PM_LEGACY is scheduled
for removal.

So replace pm_active with pm_flags.
pm_flags depends only on CONFIG_PM,
which is present for both CONFIG_APM and CONFIG_ACPI.

http://bugzilla.kernel.org/show_bug.cgi?id=9194

Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2008-01-11 12:26:47 -05:00
Rusty Russell b801a1e7db Don't blatt first element of prv in sg_chain()
I realize that sg chaining is a ploy to make the rest of the kernel
devs feel the pain of the SCSI subsystem.  But this was a little
unsubtle.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-11 10:12:55 +01:00
Michael Neuling 473980a993 [POWERPC] Fix CPU hotplug when using the SLB shadow buffer
Before we register the SLB shadow buffer, we need to invalidate the
entries in the buffer, otherwise we can end up stale entries from when
we previously offlined the CPU.

This does this invalidate as well as unregistering the buffer with
PHYP before we offline the cpu.  Tested and fixes crashes seen on
970MP (thanks to tonyb) and POWER5.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-11 16:33:55 +11:00
Zhao Yakui d1ec7298fc ACPI: apply quirk_ich6_lpc_acpi to more ICH8 and ICH9
It is important that these resources be reserved
to avoid conflicts with well known ACPI registers.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-01-11 00:24:55 -05:00
Paul Mundt d7587b1445 sh: Force __access_ok() to obey address space limit.
When the thread_info->addr_limit changes were introduced, __access_ok()
was missed in the conversion, allowing user processes to perform P1/P2
accesses under certain conditions.

This has already been corrected with the nommu refactoring in later
kernels.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-11 13:18:16 +09:00
Herbert Xu 6eb7228421 [CRYPTO] api: Set default CRYPTO_MINALIGN to unsigned long long
Thanks to David Miller for pointing out that the SLAB (or SLOB/SLUB)
cache uses the alignment of unsigned long long if the architecture
kmalloc/slab alignment macros are not defined.

This patch changes the CRYPTO_MINALIGN so that it uses the same default
value.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:17:01 +11:00
Herbert Xu 1c5dfe6a95 [CRYPTO] api: Include sched.h for cond_resched in scatterwalk.h
As Andrew Morton correctly points out, we need to explicitly include
sched.h as we use the function cond_resched in crypto/scatterwalk.h.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:59 +11:00
Herbert Xu e7cd2514ea [CRYPTO] chainiv: Avoid lock spinning where possible
This patch makes chainiv avoid spinning by postponing requests on lock
contention if the user allows the use of asynchronous algorithms.  If
a synchronous algorithm is requested then we behave as before.

This should improve IPsec performance on SMP when two CPUs attempt to
transmit over the same SA.  Currently one of them will spin doing nothing
waiting for the other CPU to finish its encryption.  This patch makes it
postpone the request and get on with other work.

If only one CPU is transmitting for a given SA, then we will process
the request synchronously as before.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:55 +11:00
Herbert Xu 3631c650c4 [CRYPTO] null: Add null blkcipher algorithm
This patch adds a null blkcipher algorithm called ecb(cipher_null) for
backwards compatibility.  Previously the null algorithm when used by
IPsec copied the data byte by byte.  This new algorithm optimises that
to a straight memcpy which lets us better measure inherent overheads in
our IPsec code.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11 08:16:53 +11:00