Making it more easy to do a basic regression test for this tracer.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: clean up
Now that a generic in_nmi is available, this patch removes the
special code in the ring_buffer and implements the in_nmi generic
version instead.
With this change, I was also able to rename the "arch_ftrace_nmi_enter"
back to "ftrace_nmi_enter" and remove the code from the ring buffer.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: prevent deadlock in NMI
The ring buffers are not yet totally lockless with writing to
the buffer. When a writer crosses a page, it grabs a per cpu spinlock
to protect against a reader. The spinlocks taken by a writer are not
to protect against other writers, since a writer can only write to
its own per cpu buffer. The spinlocks protect against readers that
can touch any cpu buffer. The writers are made to be reentrant
with the spinlocks disabling interrupts.
The problem arises when an NMI writes to the buffer, and that write
crosses a page boundary. If it grabs a spinlock, it can be racing
with another writer (since disabling interrupts does not protect
against NMIs) or with a reader on the same CPU. Luckily, most of the
users are not reentrant and protects against this issue. But if a
user of the ring buffer becomes reentrant (which is what the ring
buffers do allow), if the NMI also writes to the ring buffer then
we risk the chance of a deadlock.
This patch moves the ftrace_nmi_enter called by nmi_enter() to the
ring buffer code. It replaces the current ftrace_nmi_enter that is
used by arch specific code to arch_ftrace_nmi_enter and updates
the Kconfig to handle it.
When an NMI is called, it will set a per cpu variable in the ring buffer
code and will clear it when the NMI exits. If a write to the ring buffer
crosses page boundaries inside an NMI, a trylock is used on the spin
lock instead. If the spinlock fails to be acquired, then the entry
is discarded.
This bug appeared in the ftrace work in the RT tree, where event tracing
is reentrant. This workaround solved the deadlocks that appeared there.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: fix to prevent developers from using entry->cpu
With the new ring buffer infrastructure, the cpu for the entry is
implicit with which CPU buffer it is on.
The original code use to record the current cpu into the generic
entry header, which can be retrieved by entry->cpu. When the
ring buffer was introduced, the users were convert to use the
the cpu number of which cpu ring buffer was in use (this was passed
to the tracers by the iterator: iter->cpu).
Unfortunately, the cpu item in the entry structure was never removed.
This allowed for developers to use it instead of the proper iter->cpu,
unknowingly, using an uninitialized variable. This was not the fault
of the developers, since it would seem like the logical place to
retrieve the cpu identifier.
This patch removes the cpu item from the entry structure and fixes
all the users that should have been using iter->cpu.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: cleanup
To make it easy for ftrace plugin writers, as this was open coded in
the existing plugins
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Frédéric Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: new API
These new functions do what previously was being open coded, reducing
the number of details ftrace plugin writers have to worry about.
It also standardizes the handling of stacktrace, userstacktrace and
other trace options we may introduce in the future.
With this patch, for instance, the blk tracer (and some others already
in the tree) can use the "userstacktrace" /d/tracing/trace_options
facility.
$ codiff /tmp/vmlinux.before /tmp/vmlinux.after
linux-2.6-tip/kernel/trace/trace.c:
trace_vprintk | -5
trace_graph_return | -22
trace_graph_entry | -26
trace_function | -45
__ftrace_trace_stack | -27
ftrace_trace_userstack | -29
tracing_sched_switch_trace | -66
tracing_stop | +1
trace_seq_to_user | -1
ftrace_trace_special | -63
ftrace_special | +1
tracing_sched_wakeup_trace | -70
tracing_reset_online_cpus | -1
13 functions changed, 2 bytes added, 355 bytes removed, diff: -353
linux-2.6-tip/block/blktrace.c:
__blk_add_trace | -58
1 function changed, 58 bytes removed, diff: -58
linux-2.6-tip/kernel/trace/trace.c:
trace_buffer_lock_reserve | +88
trace_buffer_unlock_commit | +86
2 functions changed, 174 bytes added, diff: +174
/tmp/vmlinux.after:
16 functions changed, 176 bytes added, 413 bytes removed, diff: -237
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Frédéric Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar suggested using goto logic to keep the indentation
down and to be able to remove the nasty line breaks. This actually
makes the code a bit more readable.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: simplification of tracers
As all tracers are doing this we might as well do it in
register_ftrace_event and save one branch each time we call these
callbacks.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: bugfix and cleanup
Some callsites were returning either TRACE_ITER_PARTIAL_LINE if the
trace_seq routines (trace_seq_printf, etc) returned 0 meaning its buffer
was full, or zero otherwise.
But...
/* Return values for print_line callback */
enum print_line_t {
TRACE_TYPE_PARTIAL_LINE = 0, /* Retry after flushing the seq */
TRACE_TYPE_HANDLED = 1,
TRACE_TYPE_UNHANDLED = 2 /* Relay to other output functions */
};
In other cases the return value was not being relayed at all.
Most of the time it didn't hurt because the page wasn't get filled, but
for correctness sake, handle the return values everywhere.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
"ftrace: use struct pid" commit 978f3a45d9
converted ftrace_pid_trace to "struct pid*".
But we can't use do_each_pid_task() without rcu_read_lock() even if
we know the pid itself can't go away (it was pinned in ftrace_pid_write).
The exiting task can detach itself from this pid at any moment.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: API change
The trace_seq and trace_entry are in trace_iterator, where there are
more fields that may be needed by tracers, so just pass the
tracer_iterator as is already the case for struct tracer->print_line.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: make trace_event more convenient for tracers
All tracers (for the moment) that use the struct trace_event want to
have the context info printed before their own output: the pid/cmdline,
cpu, and timestamp.
But some other tracers that want to implement their trace_event
callbacks will not necessary need these information or they may want to
format them as they want.
This patch adds a new default-enabled trace option:
TRACE_ITER_CONTEXT_INFO When disabled through:
echo nocontext-info > /debugfs/tracing/trace_options
The pid, cpu and timestamps headers will not be printed.
IE with the sched_switch tracer with context-info (default):
bash-2935 [001] 100.356561: 2935:120:S ==> [001] 0:140:R <idle>
<idle>-0 [000] 100.412804: 0:140:R + [000] 11:115:S events/0
<idle>-0 [000] 100.412816: 0:140:R ==> [000] 11:115:R events/0
events/0-11 [000] 100.412829: 11:115:S ==> [000] 0:140:R <idle>
Without context-info:
2935:120:S ==> [001] 0:140:R <idle>
0:140:R + [000] 11:115:S events/0
0:140:R ==> [000] 11:115:R events/0
11:115:S ==> [000] 0:140:R <idle>
A tracer can disable it at runtime by clearing the bit
TRACE_ITER_CONTEXT_INFO in trace_flags.
The print routines were renamed to trace_print_context and
trace_print_lat_context, so that they can be used by tracers if they
want to use them for one of the trace_event callbacks.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Now that we have a working ftrace=<tracer> function, make the boot
tracer get activated by it. This way we can turn it on or off without
recompiling the kernel, as well as keeping the selftests on. The
selftests are disabled whenever a default tracer starts running.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Peter Zijlstra started the functionality to start up a default
tracing at bootup. This patch finishes the work.
Now if you add 'ftrace=<tracer>' to the command line, when that tracer
is registered on bootup, that tracer is selected and starts tracing.
Note, all selftests for tracers that are registered after this tracer
is disabled. This prevents the selftests from disturbing the running
tracer, or the running tracer from disturbing the selftest.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Frederic Weisbecker
Ingo Molnar
Wenji Huang
Steven Rostedt
Arnaldo Carvalho de Melo
Oleg Nesterov
Randy Dunlap