Add support for CMT hardware with 32-bit control and counter
registers, as found on r8a73a4 and r8a7790. To use the CMT
with 32-bit hardware a second I/O memory resource needs to
point out the CMSTR register and it needs to be 32 bit wide.
Signed-off-by: Magnus Damm <damm@opensource.se>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The reason for this is to ensure that CMT is probed earlier
than with its previous initcall level, module init.
This came up as a problem with using kzm9g-reference which does
not make use of early timers or devices. In that scenario initialisation
of SDHI and MMCIF both stall on msleep() calls due to the absence
of a initialised clock source.
Boot tested on: armadillo800eva, mackerel and kzm9g
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch adds control register callbacks for the CMT
driver. At this point only 16-bit access is supported
but in the future this will be updated to allow 32-bit
access as well.
Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: John Stultz <john.stultz@linaro.org>
Tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Break out the CMCNT and CMCOR register access code
into separate 16-bit and 32-bit functions that are
hooked into callbacks at init time. This reduces
the amount of software calculations happening at
runtime.
Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: John Stultz <john.stultz@linaro.org>
Tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Update hardware register access code for CMSTR and CMCSR
from using sh_cmt_read() and sh_cmt_write() to make use
of 16-bit register access functions such as sh_cmt_read16()
and sh_cmt_write16(). Also update sh_cmt_read() and
sh_cmt_write() now when the special cases are gone.
This patch moves us one step closer to the goal of separating
counter register access functions from control control register
functions.
Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: John Stultz <john.stultz@linaro.org>
Tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Introduce sh_cmt_read_cmstr/cmcsr/cmcnt() and
sh_cmt_write_cmstr/cmcsr/cmcnt/cmcor() to in the
future allow us to split counter registers from
control registers and reduce code complexity by
removing sh_cmt_read() and sh_cmt_write().
Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: John Stultz <john.stultz@linaro.org>
Tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
CONFIG_HOTPLUG is going away as an option. As a result, the __dev*
markings need to be removed.
This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from these drivers.
Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.
Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: John Stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Modify the SH CMT clock source/clock event device driver to support
runtime PM at a basic level (i.e. device clocks can be disabled and
enabled, but domain power must be on, because the devices have to
be marked as "irq safe").
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Magnus Damm <damm@opensource.se>
The syscore device PM flag is used to mark the devices (belonging to
a PM domain) that should never be turned off, except for the system
core (syscore) suspend/hibernation and resume stages. That flag is
stored in the device's struct pm_subsys_data object whose address is
available from struct device. However, in some situations it may be
convenient to set that flag before the device is added to a PM
domain, so it is better to move it directly to the "power" member of
struct device. Then, it can be checked by the routines in
drivers/base/power/runtime.c and drivers/base/power/main.c, which is
more straightforward.
This also reduces the number of dev_gpd_data() invocations in the
generic PM domains framework, so the overhead related to the syscore
flag is slightly smaller.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Magnus Damm <damm@opensource.se>
The always_on device flag is used to mark the devices (belonging to
a PM domain) that should never be turned off, except for the system
core (syscore) suspend/hibernation and resume stages. Change name
of that flag to "syscore" to better reflect its purpose.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Magnus Damm <damm@opensource.se>
Introduce suspend/resume routines for SH CMT clock event devices and
modify the suspend/resume routines for SH CMT clock sources such that
if those devices belong to a PM domain, the generic PM domains
framework will be notified that the given domain may be turned off
(during system suspend) or that it has to be turned on (during system
resume).
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Magnus Damm <damm@opensource.se>
Make the CMT clocksource driver mark its device as "always on"
using pm_genpd_dev_always_on() to protect it from surprise power
removals.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: Simon Horman <horms@verge.net.au>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: stable@vger.kernel.org
A pending cleanup will mean that module.h won't be implicitly
everywhere anymore. Make sure the modular drivers in clocksource
are actually calling out for <module.h> explicitly in advance.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Add code to the CMT driver to wait for CMCNT V2. This to let
the register value settle before starting the timer channel.
Makes the driver more robust.
Needed for CMT2 on sh7372 and certain CMT channels on sh73a0.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Add Runtime PM support to the CMT driver.
The hardware device is enabled as long as the clocksource
or the clockevent portion of the driver is used.
Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This patch updates the clocksource part of the CMT driver
to make use of the __clocksource_updatefreq_hz() function.
Without this patch the old code uses clocksource_register()
together with a hack that assumes a never changing clock rate
(see clk_enable(), clk_get_rate() and clk_disable()).
The patch uses clocksource_register_hz() with 1 Hz as initial
value, then lets the ->enable() callback update the value
with __clocksource_updatefreq_hz() once the struct clk has
been enabled and the frequency is stable.
Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
There are control flow that sh_cmt_set_next() does double
spin-lock. The callers sh_cmt_{start,stop}() already have
lock. But another callers sh_cmt_clock_event_{start,next}()
does not.
Now sh_cmt_set_next() does not lock by itself. All the
callers should hold spin-lock before calling it.
[damm@opensource.se: use __sh_cmt_set_next() to simplify code]
[damm@opensource.se: added stable, suitable for v2.6.35 + v2.6.36]
Cc: stable@kernel.org
Signed-off-by: Takashi YOSHII <takashi.yoshii.zj@renesas.com>
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Now when the SH-Mobile ARM platforms have been converted
to use device name it is possible to remove "clk" from
struct sh_timer_config.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Fix the rate calculation in the CMT driver.
Without this fix the clocksource runs way
too fast and we get a divide-by-zero error.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Magnus Damm
Simon Horman
Greg Kroah-Hartman
Rafael J. Wysocki
Paul Mundt
Paul Gortmaker
Takashi YOSHII