Add basic module probe support on perf probe. This introduces "--module
<MODNAME>" option to perf probe for putting probes and showing lines and
variables in the given module.
Currently, this supports only probing on running modules. Supporting off-line
module probing is the next step.
e.g.)
[show lines]
# ./perf probe --module drm -L drm_vblank_info
<drm_vblank_info:0>
0 int drm_vblank_info(struct seq_file *m, void *data)
1 {
struct drm_info_node *node = (struct drm_info_node *) m->private
3 struct drm_device *dev = node->minor->dev;
...
[show vars]
# ./perf probe --module drm -V drm_vblank_info:3
Available variables at drm_vblank_info:3
@<drm_vblank_info+20>
(unknown_type) data
struct drm_info_node* node
struct seq_file* m
[put a probe]
# ./perf probe --module drm drm_vblank_info:3 node m
Add new event:
probe:drm_vblank_info (on drm_vblank_info:3 with node m)
You can now use it on all perf tools, such as:
perf record -e probe:drm_vblank_info -aR sleep 1
[list probes]
# ./perf probe -l
probe:drm_vblank_info (on drm_vblank_info:3@drivers/gpu/drm/drm_info.c with ...
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20101021101341.3542.71638.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add -V (--vars) option for listing accessible local variables at given probe
point. This will help finding which local variables are available for event
arguments.
e.g.)
# perf probe -V call_timer_fn:23
Available variables at call_timer_fn:23
@<run_timer_softirq+345>
function_type* fn
int preempt_count
long unsigned int data
struct list_head work_list
struct list_head* head
struct timer_list* timer
struct tvec_base* base
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20101021101323.3542.40282.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Relying just on ~/.perfconfig or rebuilding the tool disabling support
for the TUI is too cumbersome, so allow specifying which UI to use and
make the command line switch override whatever is in ~/.perfconfig.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support string type casting to event argument. If perf-probe finds an argument
casted as string, it ensures the target variable is "(unsigned/signed) char
*(or []). perf-probe also adds dereference if the target is a pointer.
So, both of 'char buf[10];' and 'char *buf;' can be accessed by 'buf:string'
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100519195734.2885.1666.stgit@localhost6.localdomain6>
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The probe plugin requires access to the source code for some operations. The
source code must be in the exact same location as specified by the DWARF tags,
but sometimes the location is an absolute path that cannot be replicated by a
normal user. This change adds the -s|--source option to allow the user to
specify the root of the kernel source tree.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
LKML-Reference: <1276543590-10486-1-git-send-email-chase.douglas@canonical.com>
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are situations where there is enough information in the perf.data
to process the samples. Updating the buildid cache may add unecessary
overhead in terms of disk space and time (copying large elf images).
A persistent option to do this already exists via the perfconfig file,
simply do:
[buildid]
dir = /dev/null
This patch provides a way to suppress builid cache updates on a per-run
basis. It addds a new option, -N, to perf record. Buildids are still
generated in the perf.data file.
Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <4c19ef89.93ecd80a.40dc.fffff8e9@mx.google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds a -C option to stat, record, top to designate a list of CPUs to
monitor. CPUs can be specified as a comma-separated list or ranges, no space
allowed.
Examples:
$ perf record -a -C0-1,4-7 sleep 1
$ perf top -C0-4
$ perf stat -a -C1,2,3,4 sleep 1
With perf record in per-thread mode with inherit mode on, samples are collected
only when the thread runs on the designated CPUs.
The -C option does not turn on system-wide mode automatically.
Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4bff9496.d345d80a.41fe.7b00@mx.google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is hard to read very large numbers so provide an option to perf stat
to separate thousands using a separator. The patch leverages the locale
support of stdio. You need to set your LC_NUMERIC appropriately, for
instance LC_NUMERIC=en_US.UTF8. You need to pass -B to activate this
feature. This way existing scripts parsing the output do not need to be
changed. Here is an example.
$ perf stat noploop 2
noploop for 2 seconds
Performance counter stats for 'noploop 2':
1998.347031 task-clock-msecs # 0.998 CPUs
61 context-switches # 0.000 M/sec
0 CPU-migrations # 0.000 M/sec
118 page-faults # 0.000 M/sec
4,138,410,900 cycles # 2070.917 M/sec (scaled from 70.01%)
2,062,650,268 instructions # 0.498 IPC (scaled from 70.01%)
2,057,653,466 branches # 1029.678 M/sec (scaled from 70.01%)
40,267 branch-misses # 0.002 % (scaled from 30.04%)
2,055,961,348 cache-references # 1028.831 M/sec (scaled from 30.03%)
53,725 cache-misses # 0.027 M/sec (scaled from 30.02%)
2.001393933 seconds time elapsed
$ perf stat -B noploop 2
noploop for 2 seconds
Performance counter stats for 'noploop 2':
1998.297883 task-clock-msecs # 0.998 CPUs
59 context-switches # 0.000 M/sec
0 CPU-migrations # 0.000 M/sec
119 page-faults # 0.000 M/sec
4,131,380,160 cycles # 2067.450 M/sec (scaled from 70.01%)
2,059,096,507 instructions # 0.498 IPC (scaled from 70.01%)
2,054,681,303 branches # 1028.216 M/sec (scaled from 70.01%)
25,650 branch-misses # 0.001 % (scaled from 30.05%)
2,056,283,014 cache-references # 1029.017 M/sec (scaled from 30.03%)
47,097 cache-misses # 0.024 M/sec (scaled from 30.02%)
2.001391016 seconds time elapsed
Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4bf28fe8.914ed80a.01ca.fffff5f5@mx.google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By default, event inheritance across fork and pthread_create was on but the -i
option of stat and record, which enabled inheritance, led to believe it was off
by default.
This patch fixes this logic by inverting the meaning of the -i option. By
default inheritance is on whether you attach to a process (-p), a thread (-t)
or start a process. If you pass -i, then you turn off inheritance. Turning off
inheritance if you don't need it, helps limit perf resource usage as well.
The patch also fixes perf stat -t xxxx and perf record -t xxxx which did not
start the counters.
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <4bea9d2f.d60ce30a.0b5b.08e1@mx.google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
New commands need to have Documentation and be added to command-list.txt
so that they can appear when 'perf' is called withouth any subcommand:
[root@doppio linux-2.6-tip]# perf
usage: perf [--version] [--help] COMMAND [ARGS]
The most commonly used perf commands are:
annotate Read perf.data (created by perf record) and display annotated code
archive Create archive with object files with build-ids found in perf.data file
bench General framework for benchmark suites
buildid-cache Manage build-id cache.
buildid-list List the buildids in a perf.data file
diff Read two perf.data files and display the differential profile
inject Filter to augment the events stream with additional information
kmem Tool to trace/measure kernel memory(slab) properties
kvm Tool to trace/measure kvm guest os
list List all symbolic event types
lock Analyze lock events
probe Define new dynamic tracepoints
record Run a command and record its profile into perf.data
report Read perf.data (created by perf record) and display the profile
sched Tool to trace/measure scheduler properties (latencies)
stat Run a command and gather performance counter statistics
test Runs sanity tests.
timechart Tool to visualize total system behavior during a workload
top System profiling tool.
trace Read perf.data (created by perf record) and display trace output
See 'perf help COMMAND' for more information on a specific command.
[root@doppio linux-2.6-tip]#
The new 'perf inject' command hadn't so it wasn't appearing on that list.
Also fix the long option, that should have no spaces in it, rename the faulty one
to be '--build-ids', instead of '--inject build-ids'.
Reported-by: Ingo Molnar <mingo@elte.hu>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-f, -c 1, -R are now useless for trace events recording, moreover
-M is useless and event hurts.
Remove them from the documentation examples and from record scripts.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
First an example with the first internal test:
[acme@doppio linux-2.6-tip]$ perf test
1: vmlinux symtab matches kallsyms: Ok
So it run just one test, that is "vmlinux symtab matches kallsyms", and it was
successful.
If we run it in verbose mode, we'll see details about errors and extra warnings
for non-fatal problems:
[acme@doppio linux-2.6-tip]$ perf test -v
1: vmlinux symtab matches kallsyms:
--- start ---
Looking at the vmlinux_path (5 entries long)
No build_id in vmlinux, ignoring it
No build_id in /boot/vmlinux, ignoring it
No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it
Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols
Maps only in vmlinux:
ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text
ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text
ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0
ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn
ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1
ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2
Maps in vmlinux with a different name in kallsyms:
ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0
ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as:
*ffffffffff600100-ffffffffff60012f 0 [kernel].2
ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6
ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8
Maps only in kallsyms:
ffffffffff600130-ffffffffff6003ff 0 [kernel].4
---- end ----
vmlinux symtab matches kallsyms: Ok
[acme@doppio linux-2.6-tip]$
In the above case we only know the name of the non contiguous kernel ranges in
the address space when reading the symbol information from the ELF symtab in
vmlinux.
The /proc/kallsyms file lack this, we only notice they are separate because
there are modules after the kernel and after that more kernel functions, so we
need to have a module rbtree backed by the module .ko path to get symtabs in
the vmlinux case.
The tool uses it to match by address to emit appropriate warning, but don't
considers this fatal.
The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left
these cases just as extra info in verbose mode.
The end of the sections also aren't in kallsyms, so we the symbols layer does
another pass and sets the end addresses as the next map start minus one, which
sometimes pads, causing harmless mismatches.
But at least the symbols match, tested it by copying /proc/kallsyms to
/tmp/kallsyms and doing changes to see if they were detected.
This first test also should serve as a first stab at documenting the
symbol library by providing a self contained example that exercises it
together with comments about what is being done.
More tests to check if actions done on a monitored app, like doing mmaps, etc,
makes the kernel generate the expected events should be added next.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sonny Rao
Masami Hiramatsu
Arnaldo Carvalho de Melo
Masami Hiramatsu
Chase Douglas
Stephane Eranian
Kirill Smelkov
Ingo Molnar
Frederic Weisbecker
William Cohen
Zhang, Yanmin