This patch adds two new options to perf annotate:
- --no-asm-raw : Do not display raw instruction encodings
- --no-source : Do not interleave source code with assembly code
We believe those options make the output of annotate more readable.
Systematically displaying source can make it hard to follow code and
especially optimized code.
Raw encodings are not useful in most cases.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20110517153207.GA9834@quad
Signed-off-by: Stephane Eranian <eranian@google.com>
[committer note: Use the 'no-' option inverting logic]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add an option to perf report/annotate/script to specify which
CPUs to operate on. This enables us to take a single system wide
profile and analyse each CPU (or group of CPUs) in isolation.
This was useful when profiling a multiprocess workload where the
bottleneck was on one CPU but this was hidden in the overall
profile. Per process and per thread breakdowns didn't help
because multiple processes were running on each CPU and no
single process consumed an entire CPU.
The patch converts the list of CPUs returned by cpu_map__new
into a bitmap for fast lookup. I wanted to use -C to be
consistent with perf top/record/stat, but unfortunately perf
report already uses -C <comms>.
v2: Incorporate suggestions from David Ahern:
- Added -c to perf script
- Check that SAMPLE_CPU is set when -c is used
- Update documentation
v3: Create perf_session__cpu_bitmap()
Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Link: http://lkml.kernel.org/r/20110704215750.11647eb9@kryten
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Resolving the sample->id to an evsel since the most advanced tools,
report and annotate, and the others will too when they evolve to
properly support multi-event perf.data files.
Good also because it does an extra validation, checking that the ID is
valid when present. When that is not the case, the overhead is just a
branch + function call (perf_evlist__id2evsel).
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By creating an perf_evlist out of the attributes in the perf.data file
header, so that we can use evlists and evsels when reading recorded
sessions in addition to when we record sessions.
More work is needed to allow tools to allow the user to select which
events are wanted when browsing sessions, be it just one or a subset of
them, aggregated or showed at the same time but with different
indications on the UI to allow seeing workloads thru different views at
the same time.
But the overall goal/trend is to more uniformly use evsels and evlists.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since we'll need it when implementing the live annotate TUI browser.
This also simplifies things a bit by having the list head for the source
code to be in the dynamicly allocated part of struct annotation, that
way we don't have to pass it around, it can be found from the struct
symbol that is passed everywhere.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf annotate tool continues aggregating everything on just one
histograms, but to support the top model add support for one histogram
perf evsel in the evlist.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
They will be used by perf top, so that we have just one set of routines
to do annotation.
Rename "struct sym_priv" to "struct annotation", etc, to clarify this
code a bit.
Rename "struct sym_ext" to "struct source_line", to give it a meaningful
name, that clarifies that it is a the result of an addr2line call, that
is sorted by percentage one particular source code line appeared in the
annotation.
And since we're moving things around also rename 'sym_hist->ip' to
'sym_hist->addr' as we want to do data structure annotation at some
point.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If we are running the new perf on an old kernel without support for
sample_id_all, we should fall back to the old unordered processing of
events. If we didn't than we would *always* process events without
timestamps out of order, whether or not we hit a reordering race. In
other words, instead of there being a chance of not attributing samples
correctly, we would guarantee that samples would not be attributed.
While processing all events without timestamps before events with
timestamps may seem like an intuitive solution, it falls down as
PERF_RECORD_EXIT events would also be processed before any samples.
Even with a workaround for that case, samples before/after an exec would
not be attributed correctly.
This patch allows commands to indicate whether they need to fall back to
unordered processing, so that commands that do not care about timestamps
on every event will not be affected. If we do fallback, this will print
out a warning if report -D was invoked.
This patch adds the test in perf_session__new so that we only need to
test once per session. Commands that do not use an event_ops (such as
record and top) can simply pass NULL in it's place.
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1291951882-sup-6069@au1.ibm.com>
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
At perf_session__process_event, so that we reduce the number of lines in eache
tool sample processing routine that now receives a sample_data pointer already
parsed.
This will also be useful in the next patch, where we'll allow sample the
identity fields in MMAP, FORK, EXIT, etc, when it will be possible to see (cpu,
timestamp) just after before every event.
Also validate callchains in perf_session__process_event, i.e. as early as
possible, and keep a counter of the number of events discarded due to invalid
callchains, warning the user about it if it happens.
There is an assumption that was kept that all events have the same sample_type,
that will be dealt with in the future, when this preexisting limitation will be
removed.
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <1291318772-30880-4-git-send-email-acme@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Relying just on ~/.perfconfig or rebuilding the tool disabling support
for the TUI is too cumbersome, so allow specifying which UI to use and
make the command line switch override whatever is in ~/.perfconfig.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make all browsers return the exit key uniformly and remove the
newtExitStruct parameter, removing one more newt specific thing from the
ui API.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Right now it will just sort and position at the hottest line, i.e.
the one where more samples were taken.
It will be at the center of the screen and later TAB/shift-TAB will
cycle thru the hottest lines.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo
Andi Kleen
Stephane Eranian
Anton Blanchard
Jesper Juhl
Ian Munsie