Commit Graph

897 Commits

Author SHA1 Message Date
Shirley Ma 55c9adde13 IPoIB: Turn on interface's carrier after broadcast group is joined
Do netif_carrier_on() right after the IPv4 broadcast multicast group
is joined, rather than waiting for all of the initial set of multicast
group joins to finish.  This allows at least IPv4 traffic to limp
along on broken fabrics where not all multicast groups can be joined.

Signed-off-by: Shirley Ma <xma@us.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-08 14:59:30 -08:00
Sean Hefty 3492856e33 RDMA/ucma: Avoid sending reject if backlog is full
Change the returned error code to ENOMEM if the connection event
backlog is full.  This prevents the ib_cm from issuing a reject
on the connection, which can allow retries to succeed.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-06 14:58:11 -08:00
Steve Wise e64518f373 RDMA/cxgb3: Fix MR permission problems
Fix memory region permission problems:

- remove useless and redundant iwch_mem_perms enum.

- create ib_to_tpt_access_rights() for mapping ib access rights
  to T3 TPT permissions.

- create ib_to_mwbind_access_rights() for mapping ib access rights
  to T3 MWBIND WR permissions.

- fix up the mem reg code to utilize the new functions.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-06 12:51:02 -08:00
Steve Wise 1f6a849b7c RDMA/cxgb3: Don't reuse skbs that are non-linear or cloned
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-06 12:50:57 -08:00
Steve Wise 8cfccf02bb RDMA/cxgb3: Squelch logging AE errors
Only print one AE error for a given connection in the kernel log.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-06 12:50:53 -08:00
Steve Wise adf376b370 RDMA/cxgb3: Stop EP timer when MPA exchange is aborted by peer
Stop the endpoint timer when the MPA exchange is aborted by the peer.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-06 12:50:49 -08:00
Steve Wise 2df50da00e RDMA/cxgb3: Move QP to error on destroy if the state is IDLE
Change iwch_destroy_qp() to always move the QP to ERROR and let
iwch_modify_qp() decide what to do.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-06 12:50:45 -08:00
Steve Wise 42e3175354 RDMA/cxgb3: Fixes for "normal close" failures
Fixes for "normal close" failures:

- Start normal close timer when moving to CLOSING state.
- Handle ABORTING state in close_con_rpl().
- Stop timer correctly on abort during a normal close.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-06 12:50:37 -08:00
David Miller c3bb1092c8 RDMA/cxgb3: Fix build on sparc64
cxgb3 uses dma_alloc_coherent() et al. thus needs linux/dma-mapping.h
include in order to build reliably.

Noticed on sparc64.

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-06 12:45:57 -08:00
Sean Hefty cb164b8c6a RDMA/cma: Initialize rdma_bind_list in cma_alloc_any_port()
The struct rdma_bind_list fields for hlist are not being initialized,
resulting in a corrupted list.  Fix this by using kzalloc() to make
sure all pointers are NULL.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-06 12:41:44 -08:00
Steve Wise aeb100e246 RDMA/cxgb3: Don't use mm after it's freed in iwch_mmap()
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-06 11:48:17 -08:00
Steve Wise 7d526e6b2c RDMA/cxgb3: Start ep timer on a MPA reject
If the consumer rejects the connection we end up under-referencing the
endpoint structure.  The fix is to call iwch_ep_disconnect() instead
of the low level disconnect functions so that the endpoint close timer
is started correctly.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-06 11:47:05 -08:00
Roland Dreier 88171cfed5 IB/mthca: Fix error path in mthca_alloc_memfree()
The garbled logic in mthca_alloc_memfree() causes it to return 0, even
if it fails to allocate all doorbell records.  Fix it to return -ENOMEM
when it fails.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-01 13:17:14 -08:00
Hoang-Nam Nguyen 31726798bd IB/ehca: Fix sync between completion handler and destroy cq
This patch fixes two issues reported by Roland Dreier and Christoph Hellwig:

- Mismatched sync/locking between completion handler and destroy cq We
  introduced a counter nr_events per cq to track number of irq events
  seen. This counter is incremented when an event queue entry is seen
  and decremented after completion handler has been called regardless
  if scaling code is active or not. Note that nr_callbacks tracks
  number of events assigned to a cpu and both counters can potentially
  diverge.

  The sync between running completion handler and destroy cq is done
  by using the global spin lock ehca_cq_idr_lock.

- Replace yield by wait_event on the counter above to become zero.

Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-01 13:04:05 -08:00
Roland Dreier a27cbe8782 IPoIB: Only handle async events for one port
An asynchronous event carries the port number that the event occurred
on, so there's no reason for an IPoIB interface to process an event
associated with a different local HCA port.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-27 07:37:49 -08:00
Roland Dreier 843613b047 IPoIB: Correct debugging output when path record lookup fails
If path_rec_completion() is passed a non-NULL path record pointer
along with an unsuccessful status value, the tracing code incorrectly
prints the (invalid) DLID from the path record rather than the more
interesting status code.  The actual logic of the function correctly
uses the path record only if the status indicates a successful lookup.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-26 12:57:08 -08:00
Steve Wise 2f236735fd RDMA/cxgb3: Stop the EP Timer on BAD CLOSE
Stop the ep timer in ec_status() if the status indicates a
bad close.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-23 13:12:48 -08:00
Adrian Bunk 2b540355cd RDMA/cxgb3: cleanups
- don't mark static functions in C files as inline - gcc should know
  best whether inlining makes sense
- never compile the unused cxio_dbg.c
- make the following needlessly global functions static:
  - cxio_hal.c: cxio_hal_clear_qp_ctx()
  - iwch_provider.c: iwch_get_qp()
- remove the following unused global functions:
  - cxio_hal.c: cxio_allocate_stag()
  - cxio_resource.: cxio_hal_get_rhdl()
  - cxio_resource.: cxio_hal_put_rhdl()

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-23 13:10:43 -08:00
Sean Hefty 1836854f25 RDMA/cma: Remove unused node_guid from cma_device structure
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-22 17:54:35 -08:00
Sean Hefty e971b8cd19 IB/cm: Remove ca_guid from cm_device structure
The cm_device references an ib_device, which already contains the node_guid.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-22 17:54:33 -08:00
Sean Hefty 962063e64b RDMA/cma: Request reversible paths only
The rdma_cm requires that path records be reversible.  Set the
reversible bit when issuing an path record query.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-22 17:54:07 -08:00
Sean Hefty 47645d8d25 IB/core: Set hop limit in ib_init_ah_from_wc correctly
The hop_limit value in the ah_attr should be 0xFF, not the value read
from the received GRH (which should be 0).  See 13.5.4.4 in the 1.2 IB
spec.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-22 17:54:02 -08:00
Roland Dreier aaf1aef55f IB/uverbs: Return correct error for invalid PD in register MR
If no matching PD is found in ib_uverbs_reg_mr(), then the function
jumps to err_release without setting the return value ret.  This means
that ret will hold the return value of the call to ib_umem_get() a few
lines earlier; if the function reaches the point where it looks for
the PD, we know that ib_umem_get() must have returned 0, so
ib_uverbs_reg_mr() ends up return 0 for a bad PD ID.  Fix this by
setting ret to -EINVAL before jumping to the exit path when no PD is
found.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-22 13:16:51 -08:00
Roland Dreier 658bcef619 IPoIB: Remove unused local_rate tracking
Now that low-level drivers handle the conversion from an absolute rate
to a relative rate, there's no need for the IPoIB driver to keep track
of the local port's data rate.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-21 20:28:05 -08:00
Michael S. Tsirkin 1812063ba3 IPoIB/cm: Improve small message bandwidth
Avoid the overhead of freeing/reallocating and mapping/unmapping for
DMA pages that have not been written to by hardware.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-20 20:16:14 -08:00