Add new mount options, min_batch_time and max_batch_time, which
controls how long the jbd2 layer should wait for additional filesystem
operations to get batched with a synchronous write transaction.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Display the average commit time (which is used by the ext4 fsync
batching patch) in /proc/fs/jbd2/*/info for performance tuning
purposes.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch removes the static sleep time in favor of a more self
optimizing approach where we measure the average amount of time it
takes to commit a transaction to disk and the ammount of time a
transaction has been running. If somebody does a sync write or an
fsync() traditionally we would sleep for 1 jiffies, which depending on
the value of HZ could be a significant amount of time compared to how
long it takes to commit a transaction to the underlying storage. With
this patch instead of sleeping for a jiffie, we check to see if the
amount of time this transaction has been running is less than the
average commit time, and if it is we sleep for the delta using
schedule_hrtimeout to give us a higher precision sleep time. This
greatly benefits high end storage where you could end up sleeping for
longer than it takes to commit the transaction and therefore sitting
idle instead of allowing the transaction to be committed by keeping
the sleep time to a minimum so you are sure to always be doing
something.
Signed-off-by: Josef Bacik <jbacik@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Xen doesn't report that barriers are not supported until buffer I/O is
reported as completed, instead of when the buffer I/O is submitted.
Add a check and a fallback codepath to journal_wait_on_commit_record()
to detect this case, so that attempts to mount ext4 filesystems on
LVM/devicemapper devices on Xen guests don't blow up with an "Aborting
journal on device XXX"; "Remounting filesystem read-only" error.
Thanks to Andreas Sundstrom for reporting this issue.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
jbd2_journal_init_inode() does not call jbd2_stats_proc_exit() on all
failure paths after calling jbd2_stats_proc_init(). This leaves
dangling references to the fs in proc.
This patch fixes a bug reported by Sami Leides at:
http://bugzilla.kernel.org/show_bug.cgi?id=11493
Signed-off-by: Sami Liedes <sliedes@cc.hut.fi>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Commit 23f8b79e introducd a regression because it assumed that if
there were no transactions ready to be checkpointed, that no progress
could be made on making space available in the journal, and so the
journal should be aborted. This assumption is false; it could be the
case that simply calling jbd2_cleanup_journal_tail() will recover the
necessary space, or, for small journals, the currently committing
transaction could be responsible for chewing up the required space in
the log, so we need to wait for the currently committing transaction
to finish before trying to force a checkpoint operation.
This patch fixes a bug reported by Mihai Harpau at:
https://bugzilla.redhat.com/show_bug.cgi?id=469582
This patch fixes a bug reported by François Valenduc at:
http://bugzilla.kernel.org/show_bug.cgi?id=11840
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Duane Griffin <duaneg@dghda.com>
Cc: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
The transaction can potentially get dropped if there are no buffers
that need to be written. Make sure we call the commit callback before
potentially deciding to drop the transaction. Also avoid
dereferencing the commit_transaction pointer in the marker for the
same reason.
This patch fixes the bug reported by Eric Paris at:
http://bugzilla.kernel.org/show_bug.cgi?id=11838
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Acked-by: Eric Sandeen <sandeen@redhat.com>
Tested-by: Eric Paris <eparis@redhat.com>
Use fs/*/Kconfig more, which is good because everything related to one
filesystem is in one place and fs/Kconfig is quite fat.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The multiblock allocator needs to be able to release blocks (and issue
a blkdev discard request) when the transaction which freed those
blocks is committed. Previously this was done via a polling mechanism
when blocks are allocated or freed. A much better way of doing things
is to create a jbd2 callback function and attaching the list of blocks
to be freed directly to the transaction structure.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the journal doesn't abort when it gets an IO error in file data
blocks, the file data corruption will spread silently. Because
most of applications and commands do buffered writes without fsync(),
they don't notice the IO error. It's scary for mission critical
systems. On the other hand, if the journal aborts whenever it gets
an IO error in file data blocks, the system will easily become
inoperable. So this patch introduces a filesystem option to
determine whether it aborts the journal or just call printk() when
it gets an IO error in file data.
If you mount an ext4 fs with data_err=abort option, it aborts on file
data write error. If you mount it with data_err=ignore, it doesn't
abort, just call printk(). data_err=ignore is the default.
Here is the corresponding patch of the ext3 version:
http://kerneltrap.org/mailarchive/linux-kernel/2008/9/9/3239374
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently, original metadata buffers are dirtied when they are
unfiled whether the journal has aborted or not. Eventually these
buffers will be written-back to the filesystem by pdflush. This
means some metadata buffers are written to the filesystem without
journaling if the journal aborts. So if both journal abort and
system crash happen at the same time, the filesystem would become
inconsistent state. Additionally, replaying journaled metadata
can overwrite the latest metadata on the filesystem partly.
Because, if the journal gets aborted, journaled metadata are
preserved and replayed during the next mount not to lose
uncheckpointed metadata. This would also break the consistency
of the filesystem.
This patch prevents original metadata buffers from being dirtied
on abort by clearing BH_JBDDirty flag from those buffers. Thus,
no metadata buffers are written to the filesystem without journaling.
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When a checkpointing IO fails, current JBD2 code doesn't check the
error and continue journaling. This means latest metadata can be
lost from both the journal and filesystem.
This patch leaves the failed metadata blocks in the journal space
and aborts journaling in the case of jbd2_log_do_checkpoint().
To achieve this, we need to do:
1. don't remove the failed buffer from the checkpoint list where in
the case of __try_to_free_cp_buf() because it may be released or
overwritten by a later transaction
2. jbd2_log_do_checkpoint() is the last chance, remove the failed
buffer from the checkpoint list and abort the journal
3. when checkpointing fails, don't update the journal super block to
prevent the journaled contents from being cleaned. For safety,
don't update j_tail and j_tail_sequence either
4. when checkpointing fails, notify this error to the ext4 layer so
that ext4 don't clear the needs_recovery flag, otherwise the
journaled contents are ignored and cleaned in the recovery phase
5. if the recovery fails, keep the needs_recovery flag
6. prevent jbd2_cleanup_journal_tail() from being called between
__jbd2_journal_drop_transaction() and jbd2_journal_abort()
(a possible race issue between jbd2_log_do_checkpoint()s called by
jbd2_journal_flush() and __jbd2_log_wait_for_space())
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If we failed to write metadata buffers to the journal space and
succeeded to write the commit record, stale data can be written
back to the filesystem as metadata in the recovery phase.
To avoid this, when we failed to write out metadata buffers,
abort the journal before writing the commit record.
We can also avoid this kind of corruption by using the journal
checksum feature because it can detect invalid metadata blocks in the
journal and avoid them from being replayed. So we don't need to care
about asynchronous commit record writeout with a checksum.
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Also make sure the buffer heads are marked clean before submitting bh
for writing. The previous code was marking the buffer head dirty,
which would have forced an unneeded write (and seek) to the journal
for no good reason.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This debugging markers are designed to debug problems such as the
random filesystem latency problems reported by Arjan.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The __jbd2_log_wait_for_space function sits in a loop checkpointing
transactions until there is sufficient space free in the journal.
However, if there are no transactions to be processed (e.g. because the
free space calculation is wrong due to a corrupted filesystem) it will
never progress.
Check for space being required when no transactions are outstanding and
abort the journal instead of endlessly looping.
This patch fixes the bug reported by Sami Liedes at:
http://bugzilla.kernel.org/show_bug.cgi?id=10976
Signed-off-by: Duane Griffin <duaneg@dghda.com>
Cc: Sami Liedes <sliedes@cc.hut.fi>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Calculate the journal device name once and stash it away in the
journal_s structure. This avoids needing to call bdevname()
everywhere and reduces stack usage by not needing to allocate an
on-stack buffer. In addition, we eliminate the '/' that can appear in
device names (e.g. "cciss/c0d0p9" --- see kernel bugzilla #11321) that
can cause problems when creating proc directory names, and include the
inode number to support ocfs2 which creates multiple journals with
different inode numbers.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
the names were too generic:
drivers/uio/uio.c:87: error: expected identifier or '(' before 'do'
drivers/uio/uio.c:87: error: expected identifier or '(' before 'while'
drivers/uio/uio.c:113: error: 'map_release' undeclared here (not in a function)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Most the free-standing lock_acquire() usages look remarkably similar, sweep
them into a new helper.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Converting page lock to new locking bitops requires a change of page flag
operation naming, so we might as well convert it to something nicer
(!TestSetPageLocked_Lock => trylock_page, SetPageLocked => set_page_locked).
This also facilitates lockdeping of page lock.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In ordered mode, the current jbd2 aborts the journal if a file data buffer
has an error. But this behavior is unintended, and we found that it has
been adopted accidentally.
This patch undoes it and just calls printk() instead of aborting the
journal. Unlike a similar patch for ext3/jbd, file data buffers are
written via generic_writepages(). But we also need to set AS_EIO
into their mappings because wait_on_page_writeback_range() clears
AS_EIO before a user process sees it.
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This provides a new ordered mode implementation which gets rid of using
buffer heads to enforce the ordering between metadata change with the
related data chage. Instead, in the new ordering mode, it keeps track
of all of the inodes touched by each transaction on a list, and when
that transaction is committed, it flushes all of the dirty pages for
those inodes. In addition, the new ordered mode reverses the lock
ordering of the page lock and transaction lock, which provides easier
support for delayed allocation.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Theodore Ts'o
Josef Bacik
Sami Liedes
Alexey Dobriyan
Hidehiro Kawai
Duane Griffin
Ingo Molnar
Peter Zijlstra
Nick Piggin
Aneesh Kumar K.V