mirror of
https://github.com/linux-apfs/linux-apfs.git
synced 2026-05-01 15:00:59 -07:00
468e2f64d220fe2dc11caa2bcb9b3a1e50fc7321
108 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Linus Torvalds
|
dd198ce714 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull namespace updates from Eric Biederman:
"Life has been busy and I have not gotten half as much done this round
as I would have liked. I delayed it so that a minor conflict
resolution with the mips tree could spend a little time in linux-next
before I sent this pull request.
This includes two long delayed user namespace changes from Kirill
Tkhai. It also includes a very useful change from Serge Hallyn that
allows the security capability attribute to be used inside of user
namespaces. The practical effect of this is people can now untar
tarballs and install rpms in user namespaces. It had been suggested to
generalize this and encode some of the namespace information
information in the xattr name. Upon close inspection that makes the
things that should be hard easy and the things that should be easy
more expensive.
Then there is my bugfix/cleanup for signal injection that removes the
magic encoding of the siginfo union member from the kernel internal
si_code. The mips folks reported the case where I had used FPE_FIXME
me is impossible so I have remove FPE_FIXME from mips, while at the
same time including a return statement in that case to keep gcc from
complaining about unitialized variables.
I almost finished the work to get make copy_siginfo_to_user a trivial
copy to user. The code is available at:
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace.git neuter-copy_siginfo_to_user-v3
But I did not have time/energy to get the code posted and reviewed
before the merge window opened.
I was able to see that the security excuse for just copying fields
that we know are initialized doesn't work in practice there are buggy
initializations that don't initialize the proper fields in siginfo. So
we still sometimes copy unitialized data to userspace"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
Introduce v3 namespaced file capabilities
mips/signal: In force_fcr31_sig return in the impossible case
signal: Remove kernel interal si_code magic
fcntl: Don't use ambiguous SIG_POLL si_codes
prctl: Allow local CAP_SYS_ADMIN changing exe_file
security: Use user_namespace::level to avoid redundant iterations in cap_capable()
userns,pidns: Verify the userns for new pid namespaces
signal/testing: Don't look for __SI_FAULT in userspace
signal/mips: Document a conflict with SI_USER with SIGFPE
signal/sparc: Document a conflict with SI_USER with SIGFPE
signal/ia64: Document a conflict with SI_USER with SIGFPE
signal/alpha: Document a conflict with SI_USER for SIGTRAP
|
||
|
Linus Torvalds
|
d34fc1adf0 |
Merge branch 'akpm' (patches from Andrew)
Merge updates from Andrew Morton: - various misc bits - DAX updates - OCFS2 - most of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (119 commits) mm,fork: introduce MADV_WIPEONFORK x86,mpx: make mpx depend on x86-64 to free up VMA flag mm: add /proc/pid/smaps_rollup mm: hugetlb: clear target sub-page last when clearing huge page mm: oom: let oom_reap_task and exit_mmap run concurrently swap: choose swap device according to numa node mm: replace TIF_MEMDIE checks by tsk_is_oom_victim mm, oom: do not rely on TIF_MEMDIE for memory reserves access z3fold: use per-cpu unbuddied lists mm, swap: don't use VMA based swap readahead if HDD is used as swap mm, swap: add sysfs interface for VMA based swap readahead mm, swap: VMA based swap readahead mm, swap: fix swap readahead marking mm, swap: add swap readahead hit statistics mm/vmalloc.c: don't reinvent the wheel but use existing llist API mm/vmstat.c: fix wrong comment selftests/memfd: add memfd_create hugetlbfs selftest mm/shmem: add hugetlbfs support to memfd_create() mm, devm_memremap_pages: use multi-order radix for ZONE_DEVICE lookups mm/vmalloc.c: halve the number of comparisons performed in pcpu_get_vm_areas() ... |
||
 Rik van Riel
|
d2cd9ede6e |
mm,fork: introduce MADV_WIPEONFORK
Introduce MADV_WIPEONFORK semantics, which result in a VMA being empty
in the child process after fork. This differs from MADV_DONTFORK in one
important way.
If a child process accesses memory that was MADV_WIPEONFORK, it will get
zeroes. The address ranges are still valid, they are just empty.
If a child process accesses memory that was MADV_DONTFORK, it will get a
segmentation fault, since those address ranges are no longer valid in
the child after fork.
Since MADV_DONTFORK also seems to be used to allow very large programs
to fork in systems with strict memory overcommit restrictions, changing
the semantics of MADV_DONTFORK might break existing programs.
MADV_WIPEONFORK only works on private, anonymous VMAs.
The use case is libraries that store or cache information, and want to
know that they need to regenerate it in the child process after fork.
Examples of this would be:
- systemd/pulseaudio API checks (fail after fork) (replacing a getpid
check, which is too slow without a PID cache)
- PKCS#11 API reinitialization check (mandated by specification)
- glibc's upcoming PRNG (reseed after fork)
- OpenSSL PRNG (reseed after fork)
The security benefits of a forking server having a re-inialized PRNG in
every child process are pretty obvious. However, due to libraries
having all kinds of internal state, and programs getting compiled with
many different versions of each library, it is unreasonable to expect
calling programs to re-initialize everything manually after fork.
A further complication is the proliferation of clone flags, programs
bypassing glibc's functions to call clone directly, and programs calling
unshare, causing the glibc pthread_atfork hook to not get called.
It would be better to have the kernel take care of this automatically.
The patch also adds MADV_KEEPONFORK, to undo the effects of a prior
MADV_WIPEONFORK.
This is similar to the OpenBSD minherit syscall with MAP_INHERIT_ZERO:
https://man.openbsd.org/minherit.2
[akpm@linux-foundation.org: numerically order arch/parisc/include/uapi/asm/mman.h #defines]
Link: http://lkml.kernel.org/r/20170811212829.29186-3-riel@redhat.com
Signed-off-by: Rik van Riel <riel@redhat.com>
Reported-by: Florian Weimer <fweimer@redhat.com>
Reported-by: Colm MacCártaigh <colm@allcosts.net>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Drewry <wad@chromium.org>
Cc: <linux-api@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
 Mike Kravetz
|
aafd4562df |
mm: arch: consolidate mmap hugetlb size encodings
A non-default huge page size can be encoded in the flags argument of the mmap system call. The definitions for these encodings are in arch specific header files. However, all architectures use the same values. Consolidate all the definitions in the primary user header file (uapi/linux/mman.h). Include definitions for all known huge page sizes. Use the generic encoding definitions in hugetlb_encode.h as the basis for these definitions. Link: http://lkml.kernel.org/r/1501527386-10736-3-git-send-email-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Mike Kravetz
|
e652f69459 |
mm: hugetlb: define system call hugetlb size encodings in single file
Patch series "Consolidate system call hugetlb page size encodings". These patches are the result of discussions in https://lkml.org/lkml/2017/3/8/548. The following changes are made in the patch set: 1) Put all the log2 encoded huge page size definitions in a common header file. The idea is have a set of definitions that can be use as the basis for system call specific definitions such as MAP_HUGE_* and SHM_HUGE_*. 2) Remove MAP_HUGE_* definitions in arch specific files. All these definitions are the same. Consolidate all definitions in the primary user header file (uapi/linux/mman.h). 3) Remove SHM_HUGE_* definitions intended for user space from kernel header file, and add to user (uapi/linux/shm.h) header file. Add definitions for all known huge page size encodings as in mmap. This patch (of 3): If hugetlb pages are requested in mmap or shmget system calls, a huge page size other than default can be requested. This is accomplished by encoding the log2 of the huge page size in the upper bits of the flag argument. asm-generic and arch specific headers all define the same values for these encodings. Put common definitions in a single header file. The primary uapi header files for mmap and shm will use these definitions as a basis for definitions specific to those system calls. Link: http://lkml.kernel.org/r/1501527386-10736-2-git-send-email-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
 Willem de Bruijn
|
76851d1212 |
sock: add SOCK_ZEROCOPY sockopt
The send call ignores unknown flags. Legacy applications may already unwittingly pass MSG_ZEROCOPY. Continue to ignore this flag unless a socket opts in to zerocopy. Introduce socket option SO_ZEROCOPY to enable MSG_ZEROCOPY processing. Processes can also query this socket option to detect kernel support for the feature. Older kernels will return ENOPROTOOPT. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
 Eric W. Biederman
|
cc731525f2 |
signal: Remove kernel interal si_code magic
struct siginfo is a union and the kernel since 2.4 has been hiding a union tag in the high 16bits of si_code using the values: __SI_KILL __SI_TIMER __SI_POLL __SI_FAULT __SI_CHLD __SI_RT __SI_MESGQ __SI_SYS While this looks plausible on the surface, in practice this situation has not worked well. - Injected positive signals are not copied to user space properly unless they have these magic high bits set. - Injected positive signals are not reported properly by signalfd unless they have these magic high bits set. - These kernel internal values leaked to userspace via ptrace_peek_siginfo - It was possible to inject these kernel internal values and cause the the kernel to misbehave. - Kernel developers got confused and expected these kernel internal values in userspace in kernel self tests. - Kernel developers got confused and set si_code to __SI_FAULT which is SI_USER in userspace which causes userspace to think an ordinary user sent the signal and that it was not kernel generated. - The values make it impossible to reorganize the code to transform siginfo_copy_to_user into a plain copy_to_user. As si_code must be massaged before being passed to userspace. So remove these kernel internal si codes and make the kernel code simpler and more maintainable. To replace these kernel internal magic si_codes introduce the helper function siginfo_layout, that takes a signal number and an si_code and computes which union member of siginfo is being used. Have siginfo_layout return an enumeration so that gcc will have enough information to warn if a switch statement does not handle all of union members. A couple of architectures have a messed up ABI that defines signal specific duplications of SI_USER which causes more special cases in siginfo_layout than I would like. The good news is only problem architectures pay the cost. Update all of the code that used the previous magic __SI_ values to use the new SIL_ values and to call siginfo_layout to get those values. Escept where not all of the cases are handled remove the defaults in the switch statements so that if a new case is missed in the future the lack will show up at compile time. Modify the code that copies siginfo si_code to userspace to just copy the value and not cast si_code to a short first. The high bits are no longer used to hold a magic union member. Fixup the siginfo header files to stop including the __SI_ values in their constants and for the headers that were missing it to properly update the number of si_codes for each signal type. The fixes to copy_siginfo_from_user32 implementations has the interesting property that several of them perviously should never have worked as the __SI_ values they depended up where kernel internal. With that dependency gone those implementations should work much better. The idea of not passing the __SI_ values out to userspace and then not reinserting them has been tested with criu and criu worked without changes. Ref: 2.4.0-test1 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> |
||
|
Eric W. Biederman
|
d08477aa97 |
fcntl: Don't use ambiguous SIG_POLL si_codes
We have a weird and problematic intersection of features that when they all come together result in ambiguous siginfo values, that we can not support properly. - Supporting fcntl(F_SETSIG,...) with arbitrary valid signals. - Using positive values for POLL_IN, POLL_OUT, POLL_MSG, ..., etc that imply they are signal specific si_codes and using the aforementioned arbitrary signal to deliver them. - Supporting injection of arbitrary siginfo values for debugging and checkpoint/restore. The result is that just looking at siginfo si_codes of 1 to 6 are ambigious. It could either be a signal specific si_code or it could be a generic si_code. For most of the kernel this is a non-issue but for sending signals with siginfo it is impossible to play back the kernel signals and get the same result. Strictly speaking when the si_code was changed from SI_SIGIO to POLL_IN and friends between 2.2 and 2.4 this functionality was not ambiguous, as only real time signals were supported. Before 2.4 was released the kernel began supporting siginfo with non realtime signals so they could give details of why the signal was sent. The result is that if F_SETSIG is set to one of the signals with signal specific si_codes then user space can not know why the signal was sent. I grepped through a bunch of userspace programs using debian code search to get a feel for how often people choose a signal that results in an ambiguous si_code. I only found one program doing so and it was using SIGCHLD to test the F_SETSIG functionality, and did not appear to be a real world usage. Therefore the ambiguity does not appears to be a real world problem in practice. Remove the ambiguity while introducing the smallest chance of breakage by changing the si_code to SI_SIGIO when signals with signal specific si_codes are targeted. Fixes: v2.3.40 -- Added support for queueing non-rt signals Fixes: v2.3.21 -- Changed the si_code from SI_SIGIO Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> |
||
 Gleb Fotengauer-Malinovskiy
|
c632517923 |
tty: Fix TIOCGPTPEER ioctl definition
This ioctl does nothing to justify an _IOC_READ or _IOC_WRITE flag
because it doesn't copy anything from/to userspace to access the
argument.
Fixes:
|
||
|
Linus Torvalds
|
5518b69b76 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
"Reasonably busy this cycle, but perhaps not as busy as in the 4.12
merge window:
1) Several optimizations for UDP processing under high load from
Paolo Abeni.
2) Support pacing internally in TCP when using the sch_fq packet
scheduler for this is not practical. From Eric Dumazet.
3) Support mutliple filter chains per qdisc, from Jiri Pirko.
4) Move to 1ms TCP timestamp clock, from Eric Dumazet.
5) Add batch dequeueing to vhost_net, from Jason Wang.
6) Flesh out more completely SCTP checksum offload support, from
Davide Caratti.
7) More plumbing of extended netlink ACKs, from David Ahern, Pablo
Neira Ayuso, and Matthias Schiffer.
8) Add devlink support to nfp driver, from Simon Horman.
9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa
Prabhu.
10) Add stack depth tracking to BPF verifier and use this information
in the various eBPF JITs. From Alexei Starovoitov.
11) Support XDP on qed device VFs, from Yuval Mintz.
12) Introduce BPF PROG ID for better introspection of installed BPF
programs. From Martin KaFai Lau.
13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann.
14) For loads, allow narrower accesses in bpf verifier checking, from
Yonghong Song.
15) Support MIPS in the BPF selftests and samples infrastructure, the
MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David
Daney.
16) Support kernel based TLS, from Dave Watson and others.
17) Remove completely DST garbage collection, from Wei Wang.
18) Allow installing TCP MD5 rules using prefixes, from Ivan
Delalande.
19) Add XDP support to Intel i40e driver, from Björn Töpel
20) Add support for TC flower offload in nfp driver, from Simon
Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub
Kicinski, and Bert van Leeuwen.
21) IPSEC offloading support in mlx5, from Ilan Tayari.
22) Add HW PTP support to macb driver, from Rafal Ozieblo.
23) Networking refcount_t conversions, From Elena Reshetova.
24) Add sock_ops support to BPF, from Lawrence Brako. This is useful
for tuning the TCP sockopt settings of a group of applications,
currently via CGROUPs"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits)
net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap
dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap
cxgb4: Support for get_ts_info ethtool method
cxgb4: Add PTP Hardware Clock (PHC) support
cxgb4: time stamping interface for PTP
nfp: default to chained metadata prepend format
nfp: remove legacy MAC address lookup
nfp: improve order of interfaces in breakout mode
net: macb: remove extraneous return when MACB_EXT_DESC is defined
bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case
bpf: fix return in load_bpf_file
mpls: fix rtm policy in mpls_getroute
net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t
net, ax25: convert ax25_route.refcount from atomic_t to refcount_t
net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t
net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t
...
|
||
|
Linus Torvalds
|
9a715cd543 |
Merge tag 'tty-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here is the large tty/serial patchset for 4.13-rc1.
A lot of tty and serial driver updates are in here, along with some
fixups for some __get/put_user usages that were reported. Nothing
huge, just lots of development by a number of different developers,
full details in the shortlog.
All of these have been in linux-next for a while"
* tag 'tty-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (71 commits)
tty: serial: lpuart: add a more accurate baud rate calculation method
tty: serial: lpuart: add earlycon support for imx7ulp
tty: serial: lpuart: add imx7ulp support
dt-bindings: serial: fsl-lpuart: add i.MX7ULP support
tty: serial: lpuart: add little endian 32 bit register support
tty: serial: lpuart: refactor lpuart32_{read|write} prototype
tty: serial: lpuart: introduce lpuart_soc_data to represent SoC property
serial: imx-serial - move DMA buffer configuration to DT
serial: imx: Enable RTSD only when needed
serial: imx: Remove unused members from imx_port struct
serial: 8250: 8250_omap: Fix race b/w dma completion and RX timeout
serial: 8250: Fix THRE flag usage for CAP_MINI
tty/serial: meson_uart: update to stable bindings
dt-bindings: serial: Add bindings for the Amlogic Meson UARTs
serial: Delete dead code for CIR serial ports
serial: sirf: make of_device_ids const
serial/mpsc: switch to dma_alloc_attrs
tty: serial: Add Actions Semi Owl UART earlycon
dt-bindings: serial: Document Actions Semi Owl UARTs
tty/serial: atmel: make the driver DT only
...
|
||
 David Herrmann
|
28b5ba2aa0 |
net: introduce SO_PEERGROUPS getsockopt
This adds the new getsockopt(2) option SO_PEERGROUPS on SOL_SOCKET to retrieve the auxiliary groups of the remote peer. It is designed to naturally extend SO_PEERCRED. That is, the underlying data is from the same credentials. Regarding its syntax, it is based on SO_PEERSEC. That is, if the provided buffer is too small, ERANGE is returned and @optlen is updated. Otherwise, the information is copied, @optlen is set to the actual size, and 0 is returned. While SO_PEERCRED (and thus `struct ucred') already returns the primary group, it lacks the auxiliary group vector. However, nearly all access controls (including kernel side VFS and SYSVIPC, but also user-space polkit, DBus, ...) consider the entire set of groups, rather than just the primary group. But this is currently not possible with pure SO_PEERCRED. Instead, user-space has to work around this and query the system database for the auxiliary groups of a UID retrieved via SO_PEERCRED. Unfortunately, there is no race-free way to query the auxiliary groups of the PID/UID retrieved via SO_PEERCRED. Hence, the current user-space solution is to use getgrouplist(3p), which itself falls back to NSS and whatever is configured in nsswitch.conf(3). This effectively checks which groups we *would* assign to the user if it logged in *now*. On normal systems it is as easy as reading /etc/group, but with NSS it can resort to quering network databases (eg., LDAP), using IPC or network communication. Long story short: Whenever we want to use auxiliary groups for access checks on IPC, we need further IPC to talk to the user/group databases, rather than just relying on SO_PEERCRED and the incoming socket. This is unfortunate, and might even result in dead-locks if the database query uses the same IPC as the original request. So far, those recursions / dead-locks have been avoided by using primitive IPC for all crucial NSS modules. However, we want to avoid re-inventing the wheel for each NSS module that might be involved in user/group queries. Hence, we would preferably make DBus (and other IPC that supports access-management based on groups) work without resorting to the user/group database. This new SO_PEERGROUPS ioctl would allow us to make dbus-daemon work without ever calling into NSS. Cc: Michal Sekletar <msekleta@redhat.com> Cc: Simon McVittie <simon.mcvittie@collabora.co.uk> Reviewed-by: Tom Gundersen <teg@jklm.no> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
 Aleksa Sarai
|
54ebbfb160 |
tty: add TIOCGPTPEER ioctl
When opening the slave end of a PTY, it is not possible for userspace to safely ensure that /dev/pts/$num is actually a slave (in cases where the mount namespace in which devpts was mounted is controlled by an untrusted process). In addition, there are several unresolvable race conditions if userspace were to attempt to detect attacks through stat(2) and other similar methods [in addition it is not clear how userspace could detect attacks involving FUSE]. Resolve this by providing an interface for userpace to safely open the "peer" end of a PTY file descriptor by using the dentry cached by devpts. Since it is not possible to have an open master PTY without having its slave exposed in /dev/pts this interface is safe. This interface currently does not provide a way to get the master pty (since it is not clear whether such an interface is safe or even useful). Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Valentin Rothberg <vrothberg@suse.com> Signed-off-by: Aleksa Sarai <asarai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
 Christoph Hellwig
|
6bc51cbaa9 |
signal: Remove non-uapi <asm/siginfo.h>
By moving the kernel side __SI_* defintions right next to the userspace ones we can kill the non-uapi versions of <asm/siginfo.h> include include/asm-generic/siginfo.h and untangle the unholy mess of includes. [ tglx: Removed uapi/asm/siginfo.h from m32r, microblaze, mn10300 and score ] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-ia64@vger.kernel.org Cc: Arnd Bergmann <arnd@arndb.de> Cc: sparclinux@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Link: http://lkml.kernel.org/r/20170603190102.28866-6-hch@lst.de |
||
 Miroslav Lichvar
|
aad9c8c470 |
net: add new control message for incoming HW-timestamped packets
Add SOF_TIMESTAMPING_OPT_PKTINFO option to request a new control message for incoming packets with hardware timestamps. It contains the index of the real interface which received the packet and the length of the packet at layer 2. The index is useful with bonding, bridges and other interfaces, where IP_PKTINFO doesn't allow applications to determine which PHC made the timestamp. With the L2 length (and link speed) it is possible to transpose preamble timestamps to trailer timestamps, which are used in the NTP protocol. While this information could be provided by two new socket options independently from timestamping, it doesn't look like they would be very useful. With this option any performance impact is limited to hardware timestamping. Use dev_get_by_napi_id() to get the device and its index. On kernels with disabled CONFIG_NET_RX_BUSY_POLL or drivers not using NAPI, a zero index will be returned in the control message. CC: Richard Cochran <richardcochran@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
 Nicolas Dichtel
|
fcc8487d47 |
uapi: export all headers under uapi directories
Regularly, when a new header is created in include/uapi/, the developer forgets to add it in the corresponding Kbuild file. This error is usually detected after the release is out. In fact, all headers under uapi directories should be exported, thus it's useless to have an exhaustive list. After this patch, the following files, which were not exported, are now exported (with make headers_install_all): asm-arc/kvm_para.h asm-arc/ucontext.h asm-blackfin/shmparam.h asm-blackfin/ucontext.h asm-c6x/shmparam.h asm-c6x/ucontext.h asm-cris/kvm_para.h asm-h8300/shmparam.h asm-h8300/ucontext.h asm-hexagon/shmparam.h asm-m32r/kvm_para.h asm-m68k/kvm_para.h asm-m68k/shmparam.h asm-metag/kvm_para.h asm-metag/shmparam.h asm-metag/ucontext.h asm-mips/hwcap.h asm-mips/reg.h asm-mips/ucontext.h asm-nios2/kvm_para.h asm-nios2/ucontext.h asm-openrisc/shmparam.h asm-parisc/kvm_para.h asm-powerpc/perf_regs.h asm-sh/kvm_para.h asm-sh/ucontext.h asm-tile/shmparam.h asm-unicore32/shmparam.h asm-unicore32/ucontext.h asm-x86/hwcap2.h asm-xtensa/kvm_para.h drm/armada_drm.h drm/etnaviv_drm.h drm/vgem_drm.h linux/aspeed-lpc-ctrl.h linux/auto_dev-ioctl.h linux/bcache.h linux/btrfs_tree.h linux/can/vxcan.h linux/cifs/cifs_mount.h linux/coresight-stm.h linux/cryptouser.h linux/fsmap.h linux/genwqe/genwqe_card.h linux/hash_info.h linux/kcm.h linux/kcov.h linux/kfd_ioctl.h linux/lightnvm.h linux/module.h linux/nbd-netlink.h linux/nilfs2_api.h linux/nilfs2_ondisk.h linux/nsfs.h linux/pr.h linux/qrtr.h linux/rpmsg.h linux/sched/types.h linux/sed-opal.h linux/smc.h linux/smc_diag.h linux/stm.h linux/switchtec_ioctl.h linux/vfio_ccw.h linux/wil6210_uapi.h rdma/bnxt_re-abi.h Note that I have removed from this list the files which are generated in every exported directories (like .install or .install.cmd). Thanks to Julien Floret <julien.floret@6wind.com> for the tip to get all subdirs with a pure makefile command. For the record, note that exported files for asm directories are a mix of files listed by: - include/uapi/asm-generic/Kbuild.asm; - arch/<arch>/include/uapi/asm/Kbuild; - arch/<arch>/include/asm/Kbuild. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Mark Salter <msalter@redhat.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> |
||
|
Linus Torvalds
|
8d65b08deb |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Millar:
"Here are some highlights from the 2065 networking commits that
happened this development cycle:
1) XDP support for IXGBE (John Fastabend) and thunderx (Sunil Kowuri)
2) Add a generic XDP driver, so that anyone can test XDP even if they
lack a networking device whose driver has explicit XDP support
(me).
3) Sparc64 now has an eBPF JIT too (me)
4) Add a BPF program testing framework via BPF_PROG_TEST_RUN (Alexei
Starovoitov)
5) Make netfitler network namespace teardown less expensive (Florian
Westphal)
6) Add symmetric hashing support to nft_hash (Laura Garcia Liebana)
7) Implement NAPI and GRO in netvsc driver (Stephen Hemminger)
8) Support TC flower offload statistics in mlxsw (Arkadi Sharshevsky)
9) Multiqueue support in stmmac driver (Joao Pinto)
10) Remove TCP timewait recycling, it never really could possibly work
well in the real world and timestamp randomization really zaps any
hint of usability this feature had (Soheil Hassas Yeganeh)
11) Support level3 vs level4 ECMP route hashing in ipv4 (Nikolay
Aleksandrov)
12) Add socket busy poll support to epoll (Sridhar Samudrala)
13) Netlink extended ACK support (Johannes Berg, Pablo Neira Ayuso,
and several others)
14) IPSEC hw offload infrastructure (Steffen Klassert)"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2065 commits)
tipc: refactor function tipc_sk_recv_stream()
tipc: refactor function tipc_sk_recvmsg()
net: thunderx: Optimize page recycling for XDP
net: thunderx: Support for XDP header adjustment
net: thunderx: Add support for XDP_TX
net: thunderx: Add support for XDP_DROP
net: thunderx: Add basic XDP support
net: thunderx: Cleanup receive buffer allocation
net: thunderx: Optimize CQE_TX handling
net: thunderx: Optimize RBDR descriptor handling
net: thunderx: Support for page recycling
ipx: call ipxitf_put() in ioctl error path
net: sched: add helpers to handle extended actions
qed*: Fix issues in the ptp filter config implementation.
qede: Fix concurrency issue in PTP Tx path processing.
stmmac: Add support for SIMATIC IOT2000 platform
net: hns: fix ethtool_get_strings overflow in hns driver
tcp: fix wraparound issue in tcp_lp
bpf, arm64: fix jit branch offset related to ldimm64
bpf, arm64: implement jiting of BPF_XADD
...
|
||
 Al Viro
|
2611dc1939 |
Remove compat_sys_getdents64()
Unlike normal compat syscall variants, it is needed only for biarch architectures that have different alignement requirements for u64 in 32bit and 64bit ABI *and* have __put_user() that won't handle a store of 64bit value at 32bit-aligned address. We used to have one such (ia64), but its biarch support has been gone since 2010 (after being broken in 2008, which went unnoticed since nobody had been using it). It had escaped removal at the same time only because back in 2004 a patch that switched several syscalls on amd64 from private wrappers to generic compat ones had switched to use of compat_sys_getdents64(), which hadn't needed (or used) a compat wrapper on amd64. Let's bury it - it's at least 7 years overdue. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
||
 Chenbo Feng
|
5daab9db7b |
New getsockopt option to get socket cookie
Introduce a new getsockopt operation to retrieve the socket cookie for a specific socket based on the socket fd. It returns a unique non-decreasing cookie for each socket. Tested: https://android-review.googlesource.com/#/c/358163/ Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Chenbo Feng <fengc@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
 David S. Miller
|
6f14f443d3 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Mostly simple cases of overlapping changes (adding code nearby, a function whose name changes, for example). Signed-off-by: David S. Miller <davem@davemloft.net> |
||
 Sridhar Samudrala
|
6d4339028b |
net: Introduce SO_INCOMING_NAPI_ID
This socket option returns the NAPI ID associated with the queue on which the last frame is received. This information can be used by the apps to split the incoming flows among the threads based on the Rx queue on which they are received. If the NAPI ID actually represents a sender_cpu then the value is ignored and 0 is returned. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
 Josh Hunt
|
a2d133b1d4 |
sock: introduce SO_MEMINFO getsockopt
Allows reading of SK_MEMINFO_VARS via socket option. This way an application can get all meminfo related information in single socket option call instead of multiple calls. Adds helper function, sk_get_meminfo(), and uses that for both getsockopt and sock_diag_put_meminfo(). Suggested by Eric Dumazet. Signed-off-by: Josh Hunt <johunt@akamai.com> Reviewed-by: Jason Baron <jbaron@akamai.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
 Stafford Horne
|
fdfe4a393e |
generic syscalls: Wire up statx syscall
The new syscall statx is implemented as generic code, so enable it
for architectures like openrisc which use the generic syscall table.
Fixes:
|
||
 Andrea Arcangeli
|
e067eba587 |
userfaultfd: document _IOR/_IOW
Patch series "userfaultfd tmpfs/hugetlbfs/non-cooperative", v2 These userfaultfd features are finished and are ready for larger exposure in -mm and upstream merging. 1) tmpfs non present userfault 2) hugetlbfs non present userfault 3) non cooperative userfault for fork/madvise/mremap qemu development code is already exercising 2) and container postcopy live migration needs 3). 1) is not currently used but there's a self test and we know some qemu user for various reasons uses tmpfs as backing for KVM so it'll need it too to use postcopy live migration with tmpfs memory. All review feedback from the previous submit has been handled and the fixes are included. There's no outstanding issue AFIK. Upstream code just did a s/fe/vmf/ conversion in the page faults and this has been converted as well incrementally. In addition to the previous submits, this also wakes up stuck userfaults during UFFDIO_UNREGISTER. The non cooperative testcase actually reproduced this problem by getting stuck instead of quitting clean in some rare case as it could call UFFDIO_UNREGISTER while some userfault could be still in flight. The other option would have been to keep leaving it up to userland to serialize itself and to patch the testcase instead but the wakeup during unregister I think is preferable. David also asked the UFFD_FEATURE_MISSING_HUGETLBFS and UFFD_FEATURE_MISSING_SHMEM feature flags to be added so QEMU can avoid to probe if the hugetlbfs/shmem missing support is available by calling UFFDIO_REGISTER. QEMU already checks HUGETLBFS_MAGIC with fstatfs so if UFFD_FEATURE_MISSING_HUGETLBFS is also set, it knows UFFDIO_REGISTER will succeed (or if it fails, it's for some other more concerning reason). There's no reason to worry about adding too many feature flags. There are 64 available and worst case we've to bump the API if someday we're really going to run out of them. The round-trip network latency of hugetlbfs userfaults during postcopy live migration is still of the order of dozen milliseconds on 10GBit if at 2MB hugepage granularity so it's working perfectly and it should provide for higher bandwidth or lower CPU usage (which makes it interesting to add an option in the future to support THP granularity too for anonymous memory, UFFDIO_COPY would then have to create THP if alignment/len allows for it). 1GB hugetlbfs granularity will require big changes in hugetlbfs to work so it's deferred for later. This patch (of 42): This adds proper documentation (inline) to avoid the risk of further misunderstandings about the semantics of _IOW/_IOR and it also reminds whoever will bump the UFFDIO_API in the future, to change the two ioctl to _IOW. This was found while implementing strace support for those ioctl, otherwise we could have never found it by just reviewing kernel code and testing it. _IOC_READ or _IOC_WRITE alters nothing but the ioctl number itself, so it's only worth fixing if the UFFDIO_API is bumped someday. Link: http://lkml.kernel.org/r/20161216144821.5183-2-aarcange@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reported-by: "Dmitry V. Levin" <ldv@altlinux.org> Cc: Michael Rapoport <RAPOPORT@il.ibm.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
 Francis Yan
|
1c885808e4 |
tcp: SOF_TIMESTAMPING_OPT_STATS option for SO_TIMESTAMPING
This patch exports the sender chronograph stats via the socket SO_TIMESTAMPING channel. Currently we can instrument how long a particular application unit of data was queued in TCP by tracking SOF_TIMESTAMPING_TX_SOFTWARE and SOF_TIMESTAMPING_TX_SCHED. Having these sender chronograph stats exported simultaneously along with these timestamps allow further breaking down the various sender limitation. For example, a video server can tell if a particular chunk of video on a connection takes a long time to deliver because TCP was experiencing small receive window. It is not possible to tell before this patch without packet traces. To prepare these stats, the user needs to set SOF_TIMESTAMPING_OPT_STATS and SOF_TIMESTAMPING_OPT_TSONLY flags while requesting other SOF_TIMESTAMPING TX timestamps. When the timestamps are available in the error queue, the stats are returned in a separate control message of type SCM_TIMESTAMPING_OPT_STATS, in a list of TLVs (struct nlattr) of types: TCP_NLA_BUSY_TIME, TCP_NLA_RWND_LIMITED, TCP_NLA_SNDBUF_LIMITED. Unit is microsecond. Signed-off-by: Francis Yan <francisyyan@gmail.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> |