Rip out the check from exynos_update_plane() and create
exynos_check_plane() for the check phase enabling use to use
the atomic helpers to call our check and update phases when updating
planes.
Update all users of exynos_update_plane() accordingly to call
exynos_check_plane() before.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Tested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>y
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Previously we were ignoring the buffer offsets that are
passed through the addfb2 ioctl. This didn't cause any
major issues, since for uni-planar formats (like XRGB8888)
userspace would most of the time just use offsets[0]=0.
However with NV12 offsets[1] is very likely non-zero.
So properly apply the offsets to our dma addresses.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Acked-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Calculation ratio from exynos_drm plane codes, then each hw drivers can
use it without extra operation. Also this fixes width and height of
source used for actual crtc shown via screen.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
It's more reasonable to use src_x and src_y to represent source as
counterpart of destination(crtc). Already we are using src_width and
src_height for width and height of source.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The .destroy() callback for exynos can be replaced by drm_plane_cleanup().
The only extra operation on exynos_plane_destroy() was a call to
exynos_plane_disable() but the plane is already disabled by a earlier call
to drm_framebuffer_remove().
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
We already set each plane zpos at init, after that changes to zpos are
not expected. This patch turns zpos into a read-only property so now it is
impossible to set zpos.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Usually userspace don't want to have two overlay planes on the same zpos
so this change assign a different zpos for each plane. Before this change
a zpos of value zero was created for all planes so the userspace had to
set up the zpos of every plane it wanted to use.
Also all places that were storing zpos positions are now unsigned int.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
struct {fimd,mixer,vidi}_win_data was just keeping the same data
as struct exynos_drm_plane thus get ride of it and use exynos_drm_plane
directly.
It changes how planes are created and remove .win_mode_set() callback
that was only filling all *_win_data structs.
v2: check for return of exynos_plane_init()
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The commit "drm/exynos: remove exynos_plane_dpms" (d9ea6256) removed the
use of the enabled flag, which means that the code may attempt to call
win_enable on a NULL crtc. This results in the following oops on
Arndale:
[ 1.673479] Unable to handle kernel NULL pointer dereference at virtual address 00000368
[ 1.681500] pgd = c0004000
[ 1.684154] [00000368] *pgd=00000000
[ 1.687713] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[ 1.693012] Modules linked in:
[ 1.696045] CPU: 1 PID: 1 Comm: swapper/0 Not tainted
3.19.0-07545-g57485fa #1907
[ 1.703524] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
(....)
[ 2.014803] [<c02f9cfc>] (exynos_plane_destroy) from [<c02e61b4>] (drm_mode_config_cleanup+0x168/0x20c)
[ 2.024178] [<c02e61b4>] (drm_mode_config_cleanup) from [<c02f66fc>] (exynos_drm_load+0xac/0x12c)
This patch adds in a check to ensure exynos_crtc is not NULL before it
is dereferenced.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Summary:
- Add code cleanups and bug fixups.
- Add a new display controller dirver, DECON which is a new display
controller of Exynos7 SoC. This device is much different from
FIMD of Exynos4 and Exynos4 SoC series.
* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm/exynos: Add DECON driver
drm/exynos: fix NULL pointer reference
drm/exynos: remove exynos_plane_dpms
drm/exynos: remove mode property of exynos crtc
drm/exynos: Remove exynos_plane_dpms() call with no effect
drm/exynos: fix DMA_ATTR_NO_KERNEL_MAPPING usage
drm/exynos: hdmi: replace fb size with mode size from win commit
drm/exynos: fix no hdmi output
drm/exynos: use driver internal struct
drm/exynos: fix wrong pipe calculation for crtc
drm/exynos: remove to use unnecessary MODULE_xxx macro
drm/exynos: remove DRM_EXYNOS_DMABUF config
drm/exynos: IOMMU support should not be selectable by user
drm/exynos: add support for 'hdmi' clock
Flushing out my drm-misc queue with a few oddball things all over.
* tag 'topic/drm-misc-2015-02-06' of git://anongit.freedesktop.org/drm-intel:
drm: Use static attribute groups for managing connector sysfs entries
drm: remove DRM_FORMAT_NV12MT
drm/modes: Print the mode status in human readable form
drm/irq: Don't disable vblank interrupts when already disabled
The exynos_plane_dpms function handles enabled flag of exynos plane and
calls internal hw driver callback function for hw overlay on/off. But
it causes state disharmory problem currently and is will be obstacle to
apply atomic operation later to keep non-standard per-plane dpms state
like enabled flag.
Let's remove enabled flag, it just stop to recall internal callback
function but hw drivers can handle it properly. And call internal
callback function directly then we can remove unnecessary
exynos_plane_dpms function
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
So this has been merged originally in
commit 83052d4d5c
Author: Seung-Woo Kim <sw0312.kim@samsung.com>
Date: Thu Dec 15 15:40:55 2011 +0900
drm: Add multi buffer plane pixel formats
which hasn't seen a lot of review really. The problem is that it's not
a real pixel format, but just a different way to lay out NV12 pixels
in macroblocks, i.e. a tiling format.
The new way of doing this is with the soon-to-be-merged fb modifiers.
This was brough up in some long irc discussion around the entire
topic, as an example of where things have gone wrong. Luckily we can
correct the mistake:
- The kms side support for NV12MT is all dead code because
format_check in drm_crtc.c never accepted NV12MT.
- The gem side for the gsc support doesn't look better: The code
forgets to set the pixel format and makes a big mess with the tiling
mode bits, inadvertedly setting them all.
Conclusion: This never really worked (at least not in upstream) and
hence we can safely correct our mistake here.
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Rob Clark <robclark@freedesktop.org>
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Acked-by: Joonyoung Shim <jy0922.shim@samsung.com>
Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Split update plane in two parts, an initial check part that can fail
and the update part that can't fail.
This is a important step for the upcoming atomic modesetting support.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
exynos_drm_manager was just a redundant struct to represent the crtc as
well. In this commit we merge exynos_drm_manager into exynos_drm_crtc to
remove an unnecessary level of indirection easing the understand of the
flow on exynos.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
We can safely use the exynos_update_plane() to update the plane
framebuffer for both the overlay and primary planes.
Note that this patch removes a call to manager->ops->commit() in
exynos_drm_crtc_mode_set_commit(). The commit() call is used only by the
fimd driver to set underlying timings and need only in full modeset
operations. For plane update only win_commit is needed.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
It's doing nothing but calling exynos_crtc->ops->win_commit(), so let's
call this directly to avoid extra layers of abstraction.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
DPMS settings should only be changed by a full modeset.
exynos_plane_update() should only care about updating the planes itself
and nothing else.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
struct exynos_drm_overlay has no practical advantage nor serves as
important piece of the exynos API design. The only place it was used
was inside the struct exynos_plane which was just causing a extra
access overhead. Users had to access the overlay first and just then
get the plane information it contains.
This patch merges struct exynos_drm_overlay into struct exynos_plane.
It also renames struct exynos_plane to struct exynos_drm_plane.
The rational is to cut one step to access plane information.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This functions were doing nothing but calling a manager op function,
so remove them and call the manager directly.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The patch replaces legacy functions
drm_plane_init() / drm_crtc_init() with
drm_universal_plane_init() and drm_crtc_init_with_planes().
It allows to replace fake primary plane with the real one.
Additionally the patch leaves cleanup of crtcs to core,
this way planes and crtcs are cleaned in correct order.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
There are only a few users of the DRM_LOG_KMS() macro. We can simplify
the DRM code a bit by replacing them by DRM_DEBUG_KMS().
Cc: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This patch splits display and manager from subdrv. The result is that
crtc functions can directly call into manager callbacks and encoder
functions can directly call into display callbacks. This will allow
us to remove the exynos_drm_hdmi shim and support mixer/hdmi & fimd/dp
with common code.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Change all instances of possible_crtcs in the exynos drm driver to be
unsigned long. This matches the type used in the drm layer.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Gustavo Padovan
Tobias Jakobi
Joonyoung Shim
Charles Keepax
Dave Airlie
Daniel Vetter
Andrzej Hajda
Lespiau, Damien
Sean Paul
Sachin Kamat