Commit Graph

39 Commits

Author SHA1 Message Date
Paul Mundt 2b1bd1ac5d sh: Preliminary support for the SH-X3 CPU.
This adds basic support for UP SH-X3.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-20 18:27:10 +09:00
Paul Mundt b9601c5e59 sh: Kill off dead SH7604 support.
This was added during 2.5.x, but was never moved along. This
can easily be resurrected if someone has one they wish to work
with, but it's not worth keeping around in its current form.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08 11:55:28 +09:00
Paul Mundt 2826fa61c1 sh: Mark sparsemem regions present earlier.
We have to call in to sparse_memory_present_with_active_regions()
earlier in order for sparsemem to be happy. This was being called
too late, and was causing troubles with the platforms that needed
to enable sparsemem.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08 02:43:45 +00:00
Paul Mundt dfbb904280 sh: sparsemem support.
This implements basic sparsemem support for SH. Presently this only
uses static sparsemem, and we still permit explicit selection of
flatmem. Those boards that want sparsemem can select it as usual.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08 02:43:43 +00:00
Paul Mundt fd8f20e8e2 sh: Rip out special unknown machvec.
This kills off the BareCPU board as a "special" machvec, rather,
we leave this as a default for when no other vector is available,
or when we want to use it in combination with other vectors for
testing with generic ops. As sh_mv is copied out anyways (or
overloaded when an alternate vector is explicitly selected), this
doesn't consume any additional memory.

The generic machvec can be forcibly selected with sh_mv=generic,
or by not having any other boards enabled.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08 02:43:40 +00:00
Paul Mundt 82f81f4784 sh: Kill off machvec aliases.
We now throw all of the machvecs in to .machvec.init and either
select one on the command line, or copy out the first (and
usually only) one to sh_mv. The rest are freed as usual.

This gets rid of all of the silly sh_mv aliasing and makes the
selection explicit rather than link-order dependent.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08 02:43:39 +00:00
Paul Mundt ba36197cf4 sh: Fixup cmdline handling from machvec changes.
The command line wasn't being saved off properly after the machvec
changes went in, fix it up.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08 02:43:38 +00:00
Paul Mundt 9655ad03af sh: Fixup machvec support.
This fixes up much of the machvec handling, allowing for it to be
overloaded on boot. Making practical use of this still requires
some Kconfig munging, however.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08 02:43:37 +00:00
Paul Mundt 7a302a9674 sh: Split out CPU topology initialization.
Split out the CPU topology initialization to a separate file,
and switch it to a percpu type, rather than an NR_CPUS array.

At the same time, switch to only registering present CPUs,
rather than using the possible CPU map.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08 02:43:35 +00:00
Paul Mundt 074f98df05 sh: Add 32-bit opcode feature CPU flag.
Add a CPU flag for the CPUs that support 32-bit opcodes, which
gets passed down to userspace.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09 01:35:01 +00:00
Paul Mundt 4d5ade5b29 sh: kdump support.
This adds support for kexec based crash dumps.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:11:56 +00:00
Paul Mundt db62e5bd29 sh: Move clock reporting to its own proc entry.
Previously this was done in cpuinfo, but with the number of clocks
growing, it makes more sense to place this in a different proc entry.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:11:56 +00:00
Paul Mundt 01066625e9 sh: bootmem tidying for discontig/sparsemem preparation.
This reworks some of the node 0 bootmem initialization in
preparation for discontigmem and sparsemem support.

ARCH_POPULATES_NODE_MAP is switched to as a result of this.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:10:54 +00:00
Nobuhiro Iwamatsu 9465a54fa4 sh: MS7712SE01 board support.
Support the SH7712 (SH3-DSP) Solution Engine reference board.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:10:54 +00:00
Paul Mundt fa5da2f7bd sh: Bring kgdb back from the dead.
This code has suffered quite a bit of bitrot, do some basic
tidying to get it to a reasonably functional state again.
This gets the basic support and the console working again.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:10:51 +00:00
Paul Mundt 11c1965687 sh: Fixup cpu_data references for the non-boot CPUs.
There are a lot of bogus cpu_data-> references that only end up working
for the boot CPU, convert these to current_cpu_data to fixup SMP.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:45 +09:00
Alon Bar-Lev 53c82622c2 [PATCH] Dynamic kernel command-line: sh
1. Rename saved_command_line into boot_command_line.
2. Set command_line as __initdata.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:39 -08:00
Paul Mundt b641fe016a sh: Use early_param() for earlyprintk parsing.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12 09:00:47 +09:00
Paul Mundt 41504c3972 sh: SH-MobileR SH7722 CPU support.
This adds CPU support for the SH7722.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12 08:42:09 +09:00
Henry Nestler 19e5d9c0d2 [PATCH] initrd: remove unused false condition for initrd_start
After LOADER_TYPE && INITRD_START are true, the short if-condition
for INITRD_START can never be false.

Remove unused code from the else condition.

Signed-off-by: Henry Nestler <henry.ne@arcor.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:38 -08:00
Paul Mundt b552c7e8bc sh: Hook SH7785 in to the build system.
Simple 7785 placeholders to start hooking up other bits of code.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:37 +09:00
Yoshinori Sato 9d4436a6fb sh: Add support for SH7206 and SH7619 CPU subtypes.
This implements initial support for the SH7206 (SH-2A) and SH7619
(SH-2) MMU-less CPUs.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:36 +09:00
Paul Mundt 711fa80968 sh: build fixes for defconfigs.
Get all of the defconfigs building again.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-03 13:14:04 +09:00
Serge E. Hallyn 96b644bdec [PATCH] namespaces: utsname: use init_utsname when appropriate
In some places, particularly drivers and __init code, the init utsns is the
appropriate one to use.  This patch replaces those with a the init_utsname
helper.

Changes: Removed several uses of init_utsname().  Hope I picked all the
	right ones in net/ipv4/ipconfig.c.  These are now changed to
	utsname() (the per-process namespace utsname) in the previous
	patch (2/7)

[akpm@osdl.org: CIFS fix]
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Andrey Savochkin <saw@sw.ru>
Cc: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 07:57:21 -07:00
Paul Mundt 72c35543f8 sh: Support for L2 cache on newer SH-4A CPUs.
This implements preliminary support for the L2 caches found
on newer SH-4A CPUs.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 18:27:43 +09:00