Commit Graph

39 Commits

Author SHA1 Message Date
Sebastian Reichel 9c99e5e519 HSI: omap_ssi: drop pm_runtime_irq_safe
pm_runtime_irq_safe increases the parents runtime usage
counter effectively keeping the OMAP SoC from idling.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28 00:40:08 +02:00
Sebastian Reichel ad60db2f9f HSI: omap_ssi_port: use rpm autosuspend API
Instead of immediately sending the SSI module to
sleep, wait some time in case of new incoming or
outgoing traffic.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28 00:40:03 +02:00
Sebastian Reichel 4e552310cd HSI: omap_ssi: call msg->complete() from process context
msg->complete() should always be called from process context once
irq_safe runtime pm flag is no longer set for omap-ssi.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28 00:40:00 +02:00
Sebastian Reichel 604fdfa458 HSI: omap_ssi_port: ensure clocks are kept enabled during transfer
ensure, that clocks remain enabled, when a transfer is started.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28 00:39:56 +02:00
Sebastian Reichel d2b8d695c6 HSI: omap_ssi_port: replace pm_runtime_put_sync with non-sync variant
There is no need to wait for hardware to really reach idle states,
so just release runtime PM asynchronously.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28 00:39:43 +02:00
Sebastian Reichel fa1572d956 HSI: omap_ssi_port: avoid calling runtime_pm_*_sync inside spinlock
runtime_pm_*_sync can block when irq_safe flag is removed
from omap-ssi driver, so it may not be called while a
spinlock is held.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28 00:39:39 +02:00
Sebastian Reichel 62aa292b3e HSI: omap_ssi_port: avoid pm_runtime_get_sync in ssi_start_dma and ssi_start_pio
These functions may be called from atomic context,
so avoid synchronous runtime pm calls.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28 00:39:36 +02:00
Sebastian Reichel c4a6257315 HSI: omap_ssi_port: switch to threaded pio irq
Move pio interrupt handler from tasklet into thread to
allow runtime_pm_get_sync calls without irq_safe being
set.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28 00:39:32 +02:00
Sebastian Reichel 927d3f8f73 HSI: omap_ssi_core: remove pm_runtime_get_sync call from tasklet
We may not call pm_runtime_get_sync() from tasklet, since
it can block once pm_runtime_irq_safe is removed for omap-ssi.

Since irq can should only be created for a running device,
we assume, that the device is already running and use non-
synchronous API instead.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28 00:39:26 +02:00
Sebastian Reichel ea88f717cd HSI: omap_ssi_core: use pm_runtime_put instead of pm_runtime_put_sync
There is no need to disable the device synchronously, so
don't do it.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28 00:39:21 +02:00
Sebastian Reichel 7c5d81620e HSI: omap_ssi_port: prepare start_tx/stop_tx for blocking pm_runtime calls
ssi_start_tx and ssi_stop_tx may be called from atomic context. Once
pm_runtime_irq_safe() is removed for omap-ssi, this will fail, due
to blocking pm_runtime_*_sync() calls.

This fixes ssi_stop_tx by using non-sync API and ssi_start_tx by
using a worker thread.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28 00:39:15 +02:00
Sebastian Reichel 2083057aac HSI: omap_ssi_port: replace wkin_cken with atomic bitmap operations
This simplifies the code and avoids holding a spin_lock when
runtime pm calls are made. Once the irq_safe flag is removed
for omap_ssi's runtime pm, pm_runtime_get/put_sync can sleep,
which is a no-go while holding a spin_lock.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28 00:38:47 +02:00
Sebastian Reichel cb70e4c1bc HSI: omap_ssi: convert cawake irq handler to thread
Convert cawake interrupt handler from tasklet to
threaded interrupt handler in preparation of
blocking runtime_pm calls.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28 00:38:43 +02:00
Sebastian Reichel b6616be324 HSI: omap_ssi: do not reset module
module reset and power management rule setup
is already done by hwmod. Remove this cruft,
which predates hwmod.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28 00:37:43 +02:00
Sebastian Reichel 8c009f1f5d HSI: omap_ssi_port: remove useless newline
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28 00:37:20 +02:00
Arnd Bergmann c2f90a465d HSI: omap-ssi: move omap_ssi_port_update_fclk
After the clk change support, the ssi omap ssi core driver
now calls into the port driver to change fclk. This function
was previously inside of an #ifdef, because it was only used
when CONFIG_PM is enabled. Now it also gets used without
power management support:

drivers/hsi/built-in.o: In function `ssi_clk_event':
omap_ssi_port.c:(.text+0x1bf8): undefined reference to `omap_ssi_port_update_fclk'

This moves the function outside of the CONFIG_PM guard.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 4bcf741452 ("HSI: omap-ssi: add clk change support")
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-05-09 22:45:18 +02:00
Arnd Bergmann ac8e3ff3a0 HSI: omap-ssi: include pinctrl header files
The driver now uses some pinctrl functions, but fails
to build if PINCTRL is disabled because the respective
header files are only included indirectly:

drivers/hsi/controllers/omap_ssi_core.c: In function 'ssi_clk_event':
drivers/hsi/controllers/omap_ssi_core.c:317:4: error: implicit declaration of function 'pinctrl_pm_select_idle_state' [-Werror=implicit-function-declaration]
drivers/hsi/controllers/omap_ssi_core.c:339:4: error: implicit declaration of function 'pinctrl_pm_select_default_state' [-Werror=implicit-function-declaration]
drivers/hsi/controllers/omap_ssi_port.c: In function 'ssi_flush':
drivers/hsi/controllers/omap_ssi_port.c:520:2: error: implicit declaration of function 'pinctrl_pm_select_idle_state' [-Werror=implicit-function-declaration]

This includes the headers from the files that call the functions,
which works even if pinctrl is turned off.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 4bcf741452 ("HSI: omap-ssi: add clk change support")
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-05-09 22:45:18 +02:00
Arnd Bergmann 53c703501e HSI: omap-ssi: add COMMON_CLK dependency
Enabling the omap ssi driver without COMMON_CLK results in a build failure:

drivers/hsi/controllers/omap_ssi_core.c: In function 'ssi_clk_event':
drivers/hsi/controllers/omap_ssi_core.c:304:7: error: 'PRE_RATE_CHANGE' undeclared (first use in this function)

This adds a Kconfig dependency to avoid the invalid configuration.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 4bcf741452 ("HSI: omap-ssi: add clk change support")
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-05-09 22:45:18 +02:00
Sebastian Reichel 4bcf741452 HSI: omap-ssi: add clk change support
This adds support for frequency changes of the SSI
functional clock, which may occur due to DVFS.

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-By: Sebastian Reichel <sre@kernel.org>
2016-05-02 21:56:25 +02:00
Sebastian Reichel 0fae198988 HSI: omap_ssi: built omap_ssi and omap_ssi_port into one module
Merge omap_ssi and omap_ssi_port into one module. This
fixes problems with module cycle dependencies introduced
by future patches.

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-05-02 21:56:21 +02:00
Sebastian Reichel 2a57aba850 HSI: omap_ssi: fix removal of port platform device
This avoids removal of the HSI port device when
only the platform port device should be removed
and clears the POPULATED bit in the DT node, so
that a new platform device is created when the
driver is probed again.

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-05-02 21:56:17 +02:00
Sebastian Reichel 0845e1f20a HSI: omap_ssi: make sure probe stays available
device can be unbind/rebind, so probe should
stay available.

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-05-02 21:56:12 +02:00
Sebastian Reichel f704e1103e HSI: omap_ssi: fix module unloading
Removal of ssi controller debugfs directory must
happen after the clients have been removed from
it.

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-05-02 21:56:01 +02:00
Sebastian Reichel 73e6ce09c0 HSI: omap_ssi_port: switch to gpiod API
Simplify driver by switching to new gpio descriptor based API.

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-05-02 21:55:20 +02:00
Andrzej Hajda 525e1abc6b HSI: omap_ssi_port: fix handling of_get_named_gpio result
The function can return negative value.

The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1].

[1]: http://permalink.gmane.org/gmane.linux.kernel/2038576

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-01-07 16:07:54 +01:00