* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits)
Revert "tracing: Include module.h in define_trace.h"
irq: don't put module.h into irq.h for tracking irqgen modules.
bluetooth: macroize two small inlines to avoid module.h
ip_vs.h: fix implicit use of module_get/module_put from module.h
nf_conntrack.h: fix up fallout from implicit moduleparam.h presence
include: replace linux/module.h with "struct module" wherever possible
include: convert various register fcns to macros to avoid include chaining
crypto.h: remove unused crypto_tfm_alg_modname() inline
uwb.h: fix implicit use of asm/page.h for PAGE_SIZE
pm_runtime.h: explicitly requires notifier.h
linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h
miscdevice.h: fix up implicit use of lists and types
stop_machine.h: fix implicit use of smp.h for smp_processor_id
of: fix implicit use of errno.h in include/linux/of.h
of_platform.h: delete needless include <linux/module.h>
acpi: remove module.h include from platform/aclinux.h
miscdevice.h: delete unnecessary inclusion of module.h
device_cgroup.h: delete needless include <linux/module.h>
net: sch_generic remove redundant use of <linux/module.h>
net: inet_timewait_sock doesnt need <linux/module.h>
...
Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in
- drivers/media/dvb/frontends/dibx000_common.c
- drivers/media/video/{mt9m111.c,ov6650.c}
- drivers/mfd/ab3550-core.c
- include/linux/dmaengine.h
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (106 commits)
powerpc/p3060qds: Add support for P3060QDS board
powerpc/83xx: Add shutdown request support to MCU handling on MPC8349 MITX
powerpc/85xx: Make kexec to interate over online cpus
powerpc/fsl_booke: Fix comment in head_fsl_booke.S
powerpc/85xx: issue 15 EOI after core reset for FSL CoreNet devices
powerpc/8xxx: Fix interrupt handling in MPC8xxx GPIO driver
powerpc/85xx: Add 'fsl,pq3-gpio' compatiable for GPIO driver
powerpc/86xx: Correct Gianfar support for GE boards
powerpc/cpm: Clear muram before it is in use.
drivers/virt: add ioctl for 32-bit compat on 64-bit to fsl-hv-manager
powerpc/fsl_msi: add support for "msi-address-64" property
powerpc/85xx: Setup secondary cores PIR with hard SMP id
powerpc/fsl-booke: Fix settlbcam for 64-bit
powerpc/85xx: Adding DCSR node to dtsi device trees
powerpc/85xx: clean up FPGA device tree nodes for Freecsale QorIQ boards
powerpc/85xx: fix PHYS_64BIT selection for P1022DS
powerpc/fsl-booke: Fix setup_initial_memory_limit to not blindly map
powerpc: respect mem= setting for early memory limit setup
powerpc: Update corenet64_smp_defconfig
powerpc: Update mpc85xx/corenet 32-bit defconfigs
...
Fix up trivial conflicts in:
- arch/powerpc/configs/40x/hcu4_defconfig
removed stale file, edited elsewhere
- arch/powerpc/include/asm/udbg.h, arch/powerpc/kernel/udbg.c:
added opal and gelic drivers vs added ePAPR driver
- drivers/tty/serial/8250.c
moved UPIO_TSI to powerpc vs removed UPIO_DWAPB support
The sb_edac driver is marginally useful on a 32-bit kernel, and
currently has 64-bit divide compile errors when building that config.
For now, make this build on only for 64-bit kernels.
Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: (21 commits)
MAINTAINERS: add an entry for Edac Sandy Bridge driver
edac: tag sb_edac as EXPERIMENTAL, as it requires more testing
EDAC: Fix incorrect edac mode reporting in sb_edac
edac: sb_edac: Add it to the building system
edac: Add an experimental new driver to support Sandy Bridge CPU's
i7300_edac: Fix error cleanup logic
i7core_edac: Initialize memory name with cpu, channel, bank
i7core_edac: Fix compilation on 32 bits arch
i7core_edac: scrubbing fixups
EDAC: Correct Kconfig dependencies
i7core_edac: return -ENODEV if no MC is found
i7core_edac: use edac's own way to print errors
MAINTAINERS: remove dropped edac_mce.* from the file
i7core_edac: Drop the edac_mce facility
x86, MCE: Use notifier chain only for MCE decoding
EDAC i7core: Use mce socketid for better compatibility
i7core_edac: Don't enable memory scrubbing for Xeon 35xx
i7core_edac: Add scrubbing support
edac: Move edac main structs to include/linux/edac.h
i7core_edac: Fix oops when trying to inject errors
...
The edac driver for Sandy Bridge was found to be reporting "FPM"
for edac_mode, which clearly doesn't make sense. It was found that
sb_edac.c:get_dimm_config was reusing a variable for both mem_type
and edac_type, and thus was overwriting the value after setting
it correctly. This patch fixes that issue.
Before the patch:
/sys/devices/system/edac/mc/mc0/csrow0/edac_mode:FPM
/sys/devices/system/edac/mc/mc0/csrow1/edac_mode:FPM
/sys/devices/system/edac/mc/mc0/csrow2/edac_mode:FPM
/sys/devices/system/edac/mc/mc0/csrow3/edac_mode:FPM
After:
/sys/devices/system/edac/mc/mc0/csrow0/edac_mode:S4ECD4ED
/sys/devices/system/edac/mc/mc0/csrow1/edac_mode:S4ECD4ED
/sys/devices/system/edac/mc/mc0/csrow2/edac_mode:S4ECD4ED
/sys/devices/system/edac/mc/mc0/csrow3/edac_mode:S4ECD4ED
Signed-off-by: Mark A. Grondona <mgrondona@llnl.gov>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Some changes on it were required due to changeset cd90cc84c6bf0, that
changed the glue with the MCE logic.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This driver is known to work on mine and Tony's test environments,
using software error injection, and a partial hardware/software
error injection tool.
There's no broader range test yet to double check if the error decoding
logic will actually point to the right DIMM, so use it with care.
More tests are required to be sure that the driver will work on all
different types of memory configurations.
If you're willing to risk using it, I suggest you to enable EDAC debugs
for your test machines, as the debug logs helps to track what's going
inside the driver.
Please feed me with bug reports, if you notice that the driver
is miss-behaving.
Tested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The error cleanup logic was broken. Due to that, one error is generated for
every error polling.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
on i386:
ERROR: "__udivdi3" [drivers/edac/i7core_edac.ko] undefined!\
In both get_sdram_scrub_rate() and set_sdram_scrub_rate()
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Get a more reliable DCLK value from DMI, name the SCRUBINTERVAL mask
and guard against potential overflow in the scrub rate computations.
Signed-off-by: Nils Carlson <nils.carlson@ericsson.com>
Both AMD and Intel i7 EDAC drivers use MCE features and are thus
dependent of this functionality present in the kernel. Express this in
Kconfig so that randconfig builds don't break.
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Nehalem-EX uses a different memory controller. However, as the
memory controller is not visible on some Nehalem/Nehalem-EP, we
need to indirectly probe via a X58 PCI device. The same devices
are found on (some) Nehalem-EX. So, on those machines, the
probe routine needs to return -ENODEV, as the actual Memory
Controller registers won't be detected.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Remove edac_mce pieces and use the normal MCE decoder notifier chain by
retaining the same functionality with considerably less code.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This file really needs the full module.h header file present, but
was just getting it implicitly before. Fix it up in advance so we
avoid build failures once the cleanup commit is present.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
mce->socketid and cpu_data(mce->cpu).phys_proc_id are the same,
compare with mce_setup (in mce.c):
m->cpu = m->extcpu = smp_processor_id();
...
m->socketid = cpu_data(m->extcpu).phys_proc_id;
This makes it easier for example for XEN patches to hook into
the MCE subsystem.
Compile tested on x86_64.
Signed-off-by: Thomas Renninger <trenn@suse.de>
CC: JBeulich@novell.com
CC: linux-edac@vger.kernel.org
CC: Mauro Carvalho Chehab <mchehab@redhat.com>
Add scrubbing support to i7core_edac, tested on intel Xeon L5638.
Signed-off-by: Samuel Gabrielsson <samuel.gabrielsson@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
As we'll need to use those structs for trace functions, they should
be on a more public place. So, move struct mem_ctl_info & friends
to edac.h.
No functional changes on this patch.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Error injection needs the pci device 0:0. So, we need to revert
this changeset: 79daef2099.
Tests need to be made to be sure that refcount won't be wrong
as noticed before.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Shaohui Xie
Linus Torvalds
Josh Boyer
Mauro Carvalho Chehab
Mark A. Grondona
Sedat Dilek
Nils Carlson
Borislav Petkov
Paul Gortmaker
Thomas Renninger
Samuel Gabrielsson
David Sterba
Dan Carpenter