Define three modes for the SRIOV e-switch operation, none (SRIOV_NONE,
none of the VF vports are enabled), legacy (SRIOV_LEGACY, the current mode)
and sriov offloads (SRIOV_OFFLOADS). Currently, when in SRIOV, only the
legacy mode is supported, where steering rules are of the form:
destination mac --> VF vport
This patch does not change any functionality.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simon Wunderlich says:
====================
This feature patchset includes the following changes:
- two patches with minimal clean up work by Antonio Quartulli and
Simon Wunderlich
- eight patches of B.A.T.M.A.N. V, API and documentation clean
up work, by Antonio Quartulli and Marek Lindner
- Andrew Lunn fixed the skb priority adoption when forwarding
fragmented packets (two patches)
- Multicast optimization support is now enabled for bridges which
comes with some protocol updates, by Linus Luessing
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Yisen Zhuang says:
====================
net: hns: fix the typo of hns
This series includes typo fixes which review by Andy, adding
the hns maintainer to MAINTAINERS, as below:
> from Daode: adds the maintainer for hns driver;
> from Daode: fix the typo of hns reviewed by Andy Shevchenko;
> from Kejian: one remove redundant function and two fix to get
configuration from DT.
changlog:
v2 -> v3:
match all files in and below drivers/net/ethernet/hisilicon/
v1 -> v2:
fix the indentations reviewed by David.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the registers of subctrl may be different, it is better to
mv the registers from hns mdio driver routine to device tree node.
Signed-off-by: Kejian Yan <yankejian@huawei.com>
Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is PORT_TP type if the service port is GE mode. It is wrong to
judge the port type by using if it is service port. Adding the media
type to know port type.
Reported-by: Jinchuan Tian <tianjinchuan1@huawei.com>
Signed-off-by: Kejian Yan <yankejian@huawei.com>
Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The sequence of hns_mac_dev_to_enet_if() is the same as
hns_get_enet_interface(), and hns_get_enet_interface() is called
by initialization to get the mac mode. And the mode is not changed
anywhere. Thus add hns_mac_dev_to_enet_if() function to get the mac
mode is obviously redundant.
Reported-by: Jinchuan Tian <tianjinchuan1@huawei.com>
Signed-off-by: Kejian Yan <yankejian@huawei.com>
Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are two approaches to assign data, one does 2 loops, another
does 1 loop. This patch normalize the different methods to 1 loop.
Signed-off-by: Daode Huang <huangdaode@hisilicon.com>
Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
According to the previous review comments from Andy, this patch
deletes the redundant parens in the patch.
Signed-off-by: Daode Huang <huangdaode@hisilicon.com>
Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sowmini Varadhan says:
====================
RDS:TCP data structure changes for multipath support
The second installment of changes to enable multipath support in
RDS-TCP. This series implements the changes in rds-tcp so that the
rds_conn_path has a pointer to the rds_tcp_connection in cp_transport_data.
Struct rds_tcp_connection keeps track of the inet_sk per path in
t_sock. The ->sk_user_data in turn is a pointer to the rds_conn_path.
With this set of changes, rds_tcp has the needed plumbing to handle
multiple paths(socket) per rds_connection.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
RDS ping messages are sent with a non-zero src port to a zero
dst port, so that the rds pong messages can be sent back to the
originators src port. However if a confused/malicious sender
sends a ping with a 0 src port, we'd have an infinite ping-pong
loop. To avoid this, the receiver should ignore ping messages
with a 0 src port.
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When reconnecting, the peer with the smaller IP address will initiate
the reconnect, to avoid needless duelling SYN issues.
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ->sk_user_data contains a pointer to the rds_conn_path
for the socket. Use this consistently in the rds_tcp_data_ready
callbacks to get the rds_conn_path for rds_recv_incoming.
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A single rds_connection may have multiple rds_conn_paths that have
to be carefully and correctly destroyed, for both rmmod and
netns-delete cases.
For both cases, we extract a single rds_tcp_connection for
each conn into a temporary list, and then invoke rds_conn_destroy()
which iteratively dismantles every path in the rds_connection.
For the netns deletion case, we additionally have to make sure
that we do not leave a socket in TIME_WAIT state, as this will
hold up the netns deletion. Thus we call rds_tcp_conn_paths_destroy()
to reset state quickly.
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The struct rds_tcp_connection is the transport-specific private
data structure that tracks TCP information per rds_conn_path.
Modify this structure to have a back-pointer to the rds_conn_path
for which it is the ->cp_transport_data.
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The c_passive bit is only intended for the IB transport and will
never be encountered in rds-tcp, so remove the dead logic that
predicates on this bit.
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Refactor code to avoid separate indirections for single-path
and multipath transports. All transports (both single and mp-capable)
will get a pointer to the rds_conn_path, and can trivially derive
the rds_connection from the ->cp_conn.
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Martin KaFai Lau says:
====================
cgroup: bpf: cgroup2 membership test on skb
This series is to implement a bpf-way to
check the cgroup2 membership of a skb (sk_buff).
It is similar to the feature added in netfilter:
c38c4597e4 ("netfilter: implement xt_cgroup cgroup2 path match")
The current target is the tc-like usage.
v3:
- Remove WARN_ON_ONCE(!rcu_read_lock_held())
- Stop BPF_MAP_TYPE_CGROUP_ARRAY usage in patch 2/4
- Avoid mounting bpf fs manually in patch 4/4
- Thanks for Daniel's review and the above suggestions
- Check CONFIG_SOCK_CGROUP_DATA instead of CONFIG_CGROUPS. Thanks to
the kbuild bot's report.
Patch 2/4 only needs CONFIG_CGROUPS while patch 3/4 needs
CONFIG_SOCK_CGROUP_DATA. Since a single bpf cgrp2 array alone is
not useful for now, CONFIG_SOCK_CGROUP_DATA is also used in
patch 2/4. We can fine tune it later if we find other use cases
for the cgrp2 array.
- Return EAGAIN instead of ENOENT if the cgrp2 array entry is
NULL. It is to distinguish these two cases: 1) the userland has
not populated this array entry yet. or 2) not finding cgrp2 from the skb.
- Be-lated thanks to Alexei and Tejun on reviewing v1 and giving advice on
this work.
v2:
- Fix two return cases in cgroup_get_from_fd()
- Fix compilation errors when CONFIG_CGROUPS is not used:
- arraymap.c: avoid registering BPF_MAP_TYPE_CGROUP_ARRAY
- filter.c: tc_cls_act_func_proto() returns NULL on BPF_FUNC_skb_in_cgroup
- Add comments to BPF_FUNC_skb_in_cgroup and cgroup_get_from_fd()
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
test_cgrp2_array_pin.c:
A userland program that creates a bpf_map (BPF_MAP_TYPE_GROUP_ARRAY),
pouplates/updates it with a cgroup2's backed fd and pins it to a
bpf-fs's file. The pinned file can be loaded by tc and then used
by the bpf prog later. This program can also update an existing pinned
array and it could be useful for debugging/testing purpose.
test_cgrp2_tc_kern.c:
A bpf prog which should be loaded by tc. It is to demonstrate
the usage of bpf_skb_in_cgroup.
test_cgrp2_tc.sh:
A script that glues the test_cgrp2_array_pin.c and
test_cgrp2_tc_kern.c together. The idea is like:
1. Load the test_cgrp2_tc_kern.o by tc
2. Use test_cgrp2_array_pin.c to populate a BPF_MAP_TYPE_CGROUP_ARRAY
with a cgroup fd
3. Do a 'ping -6 ff02::1%ve' to ensure the packet has been
dropped because of a match on the cgroup
Most of the lines in test_cgrp2_tc.sh is the boilerplate
to setup the cgroup/bpf-fs/net-devices/netns...etc. It is
not bulletproof on errors but should work well enough and
give enough debug info if things did not go well.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Tejun Heo <tj@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adds a bpf helper, bpf_skb_in_cgroup, to decide if a skb->sk
belongs to a descendant of a cgroup2. It is similar to the
feature added in netfilter:
commit c38c4597e4 ("netfilter: implement xt_cgroup cgroup2 path match")
The user is expected to populate a BPF_MAP_TYPE_CGROUP_ARRAY
which will be used by the bpf_skb_in_cgroup.
Modifications to the bpf verifier is to ensure BPF_MAP_TYPE_CGROUP_ARRAY
and bpf_skb_in_cgroup() are always used together.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Tejun Heo <tj@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Or Gerlitz
David S. Miller
Kejian Yan
Daode Huang
Sowmini Varadhan
Martin KaFai Lau