b42dc32d4f
perf tools: Fix dwarf unwind max_stack processing
...
The 'unwind__get_entries' function currently returns 'max_stack + 1'
entries (instead of exact max_stack entries), because max_stack value
does not get decremented for the first entry.
This fix makes dwarf-unwind test pass.
Signed-off-by: Jiri Olsa <jolsa@redhat.com >
Acked-by: Jean Pihet <jean.pihet@linaro.org >
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com >
Cc: David Ahern <dsahern@gmail.com >
Cc: Frederic Weisbecker <fweisbec@gmail.com >
Cc: Ingo Molnar <mingo@kernel.org >
Cc: Jean Pihet <jean.pihet@linaro.org >
Cc: Namhyung Kim <namhyung@kernel.org >
Cc: Paul Mackerras <paulus@samba.org >
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl >
Link: http://lkml.kernel.org/r/1389098853-14466-7-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2014-02-18 09:34:47 -03:00
aa16b81fe9
perf tests x86: Add dwarf unwind test
...
Adding dwarf unwind test, that setups live machine data over the perf
test thread and does the remote unwind.
At this moment this test fails due to bug in the max_stack processing in
unwind__get_entries function. This is fixed in following patch.
Need to use -fno-optimize-sibling-calls for test compilation, otherwise
'krava_*' function calls are optimized into jumps and ommited from the
stack unwind.
So far it's enabled only for x86.
Signed-off-by: Jiri Olsa <jolsa@redhat.com >
Acked-by: Jean Pihet <jean.pihet@linaro.org >
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com >
Cc: David Ahern <dsahern@gmail.com >
Cc: Frederic Weisbecker <fweisbec@gmail.com >
Cc: Ingo Molnar <mingo@kernel.org >
Cc: Jean Pihet <jean.pihet@linaro.org >
Cc: Namhyung Kim <namhyung@kernel.org >
Cc: Paul Mackerras <paulus@samba.org >
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl >
Link: http://lkml.kernel.org/r/1389098853-14466-6-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2014-02-18 09:34:47 -03:00
3c8b06f981
perf tests x86: Introduce perf_regs_load function
...
Introducing perf_regs_load function, which is going to be used for dwarf
unwind test in following patches.
It takes single argument as a pointer to the regs dump buffer and
populates it with current registers values.
Signed-off-by: Jiri Olsa <jolsa@redhat.com >
Acked-by: Jean Pihet <jean.pihet@linaro.org >
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com >
Cc: David Ahern <dsahern@gmail.com >
Cc: Frederic Weisbecker <fweisbec@gmail.com >
Cc: Ingo Molnar <mingo@kernel.org >
Cc: Jean Pihet <jean.pihet@linaro.org >
Cc: Namhyung Kim <namhyung@kernel.org >
Cc: Paul Mackerras <paulus@samba.org >
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl >
Link: http://lkml.kernel.org/r/1389098853-14466-5-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2014-02-18 09:34:47 -03:00
b58f608e31
perf tools: Fix memory leak in event_format__print function
...
Properly destroying trace_seq object.
Signed-off-by: Jiri Olsa <jolsa@redhat.com >
Acked-by: Namhyung Kim <namhyung@kernel.org >
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com >
Cc: David Ahern <dsahern@gmail.com >
Cc: Frederic Weisbecker <fweisbec@gmail.com >
Cc: Ingo Molnar <mingo@elte.hu >
Cc: Namhyung Kim <namhyung@kernel.org >
Cc: Paul Mackerras <paulus@samba.org >
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl >
Cc: Steven Rostedt <rostedt@goodmis.org >
Link: http://lkml.kernel.org/r/1391377150-23920-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2014-02-18 09:34:47 -03:00
a601fdff1a
perf record: Add readable output for callchain debug
...
Adding people readable output for callchain debug, to get following '-v'
output:
$ perf record -v -g ls
callchain: type DWARF
callchain: stack dump size 4096
...
Signed-off-by: Jiri Olsa <jolsa@redhat.com >
Cc: Adrian Hunter <adrian.hunter@intel.com >
Cc: Andi Kleen <andi@firstfloor.org >
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com >
Cc: David Ahern <dsahern@gmail.com >
Cc: Ingo Molnar <mingo@elte.hu >
Cc: Namhyung Kim <namhyung@kernel.org >
Cc: Paul Mackerras <paulus@samba.org >
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl >
Link: http://lkml.kernel.org/r/1391427883-13443-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2014-02-18 09:34:47 -03:00
eb853e8032
perf tools: Add call-graph option support into .perfconfig
...
Adding call-graph option support into .perfconfig file, so it's now
possible use call-graph option like:
[top]
call-graph = fp
[record]
call-graph = dwarf,8192
Above options ONLY setup the unwind method. To enable perf record/top to
actually use it the command line option -g/-G must be specified.
The --call-graph option overloads .perfconfig setup.
Assuming above configuration:
$ perf record -g ls
- enables dwarf unwind with user stack size dump 8192 bytes
$ perf top -G
- enables frame pointer unwind
$ perf record --call-graph=fp ls
- enables frame pointer unwind
$ perf top --call-graph=dwarf,4096 ls
- enables dwarf unwind with user stack size dump 4096 bytes
Signed-off-by: Jiri Olsa <jolsa@redhat.com >
Cc: Adrian Hunter <adrian.hunter@intel.com >
Cc: Andi Kleen <andi@firstfloor.org >
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com >
Cc: David Ahern <dsahern@gmail.com >
Cc: Ingo Molnar <mingo@elte.hu >
Cc: Namhyung Kim <namhyung@kernel.org >
Cc: Paul Mackerras <paulus@samba.org >
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl >
Link: http://lkml.kernel.org/r/1391427883-13443-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2014-02-18 09:34:47 -03:00
bc5290869d
perf tools: Put proper period for for samples without PERIOD sample_type
...
We use PERF_SAMPLE_PERIOD sample type only for frequency
setup -F (default) option. The -c does not need store period,
because it's always the same.
In -c case the report code uses '1' as period. Fixing
it to perf_event_attr::sample_period.
Signed-off-by: Jiri Olsa <jolsa@redhat.com >
Cc: Adrian Hunter <adrian.hunter@intel.com >
Cc: Andi Kleen <andi@firstfloor.org >
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com >
Cc: David Ahern <dsahern@gmail.com >
Cc: Ingo Molnar <mingo@elte.hu >
Cc: Namhyung Kim <namhyung@kernel.org >
Cc: Paul Mackerras <paulus@samba.org >
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl >
Link: http://lkml.kernel.org/r/1391427883-13443-1-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2014-02-18 09:34:46 -03:00
106395dfda
perf report: Remove some needless container_of usage
...
Since all it wants is to get the 'struct record' from the received
'struct perf_tool', and this is already done at the callers of these
functions, short circuit it.
Cc: Adrian Hunter <adrian.hunter@intel.com >
Cc: David Ahern <dsahern@gmail.com >
Cc: Frederic Weisbecker <fweisbec@gmail.com >
Cc: Jiri Olsa <jolsa@redhat.com >
Cc: Mike Galbraith <efault@gmx.de >
Cc: Namhyung Kim <namhyung@kernel.org >
Cc: Paul Mackerras <paulus@samba.org >
Cc: Peter Zijlstra <peterz@infradead.org >
Cc: Stephane Eranian <eranian@google.com >
Link: http://lkml.kernel.org/n/tip-xz8p659sjpad396vye5t24gx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2014-02-18 09:34:46 -03:00
644f2df29f
perf tools: Shorten sample symbol resolving function signature
...
Since two of the parameters come from the same 'struct
addr_location', rename machine__resolve_bstack() to sample__resolve_bstack()
and pass the that addr_location instead.
This is also for consistency with the same change that resulted in the
sample__resolve_mem() function.
Cc: Adrian Hunter <adrian.hunter@intel.com >
Cc: David Ahern <dsahern@gmail.com >
Cc: Frederic Weisbecker <fweisbec@gmail.com >
Cc: Jiri Olsa <jolsa@redhat.com >
Cc: Mike Galbraith <efault@gmx.de >
Cc: Namhyung Kim <namhyung@kernel.org >
Cc: Paul Mackerras <paulus@samba.org >
Cc: Peter Zijlstra <peterz@infradead.org >
Cc: Stephane Eranian <eranian@google.com >
Link: http://lkml.kernel.org/n/tip-99ecqt8jiyyksiyx3se7l5ia@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2014-02-18 09:34:46 -03:00
e80faac046
perf tools: Shorten sample symbol resolving function signature
...
Since three of the parameters come from the same 'struct addr_location',
rename machine__resolve_mem() to sample__resolve_mem() and pass the
that addr_location instead.
Cc: Adrian Hunter <adrian.hunter@intel.com >
Cc: David Ahern <dsahern@gmail.com >
Cc: Frederic Weisbecker <fweisbec@gmail.com >
Cc: Jiri Olsa <jolsa@redhat.com >
Cc: Mike Galbraith <efault@gmx.de >
Cc: Namhyung Kim <namhyung@kernel.org >
Cc: Paul Mackerras <paulus@samba.org >
Cc: Peter Zijlstra <peterz@infradead.org >
Cc: Stephane Eranian <eranian@google.com >
Link: http://lkml.kernel.org/n/tip-3f5otpssefh9l5hi1t259h8n@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2014-02-18 09:34:46 -03:00
17f22a3fbc
perf report: Use al->cpumode where applicable
...
We don't need to recalculate cpumode from the perf_event->header field,
as this is already available in the struct addr_location->cpumode field.
Remove the function signature of functions that receive both perf_event
and addr_location parameters but use perf_event just to extract the
cpumode.
Cc: Adrian Hunter <adrian.hunter@intel.com >
Cc: David Ahern <dsahern@gmail.com >
Cc: Frederic Weisbecker <fweisbec@gmail.com >
Cc: Jiri Olsa <jolsa@redhat.com >
Cc: Mike Galbraith <efault@gmx.de >
Cc: Namhyung Kim <namhyung@kernel.org >
Cc: Paul Mackerras <paulus@samba.org >
Cc: Peter Zijlstra <peterz@infradead.org >
Cc: Stephane Eranian <eranian@google.com >
Link: http://lkml.kernel.org/n/tip-tmct07y7mka54allj82trlnx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2014-02-18 09:34:46 -03:00
844ae5b46c
perf trace: Fix ioctl 'request' beautifier build problems on !(i386 || x86_64) arches
...
Supporting decoding the ioctl 'request' parameter needs more work to
properly support more architectures, the current approach doesn't work
on at least powerpc and sparc, as reported by Ben Hutchings in
http://lkml.kernel.org/r/1391593985.3003.48.camel@deadeye.wl.decadent.org.uk .
Work around that by making it to be ifdefed for the architectures known
to work with the current, limited approach, i386 and x86_64 till better
code is written.
Reported-by: Ben Hutchings <ben@decadent.org.uk >
Acked-by: Ben Hutchings <ben@decadent.org.uk >
Cc: Adrian Hunter <adrian.hunter@intel.com >
Cc: David Ahern <dsahern@gmail.com >
Cc: Frederic Weisbecker <fweisbec@gmail.com >
Cc: Jiri Olsa <jolsa@redhat.com >
Cc: Mike Galbraith <efault@gmx.de >
Cc: Namhyung Kim <namhyung@kernel.org >
Cc: Paul Mackerras <paulus@samba.org >
Cc: Peter Zijlstra <peterz@infradead.org >
Cc: Stephane Eranian <eranian@google.com >
Cc: <stable@vger.kernel.org > # 3.13 Fixes: 78645cf3edhttp://lkml.kernel.org/n/tip-ss04k11insqlu329xh5g02q0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2014-02-13 17:28:31 -03:00
79d26a6a19
perf trace: Add fallback definition of EFD_SEMAPHORE
...
glibc 2.17 is missing this on sparc, despite the fact that it's not
architecture-specific.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk >
Fixes: 49af9e93adstable@vger.kernel.org >
Cc: Ingo Molnar <mingo@redhat.com >
Cc: Paul Mackerras <paulus@samba.org >
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl >
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1391648435.3003.100.camel@deadeye.wl.decadent.org.uk
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2014-02-10 11:34:31 -03:00
88fee52e58
perf list: Fix checking for supported events on older kernels
...
"perf list" listing of hardware events doesn't work on older ARM devices.
The change enabling event detection:
commit b41f1cec91namhyung.kim@lge.com >
Date: Tue Aug 27 11:41:53 2013 +0900
perf list: Skip unsupported events
uses the following code in tools/perf/util/parse-events.c:
struct perf_event_attr attr = {
.type = type,
.config = config,
.disabled = 1,
.exclude_kernel = 1,
};
On ARM machines pre-dating the Cortex-A15 this doesn't work, as these
machines don't support .exclude_kernel. So starting with 3.12 "perf
list" does not report any hardware events at all on older machines (seen
on Rasp-Pi, Pandaboard, Beagleboard, etc).
This version of the patch makes changes suggested by Namhyung Kim to
check for EACCESS and retry (instead of just dropping the
exclude_kernel) so we can properly handle machines where
/proc/sys/kernel/perf_event_paranoid is set to 2.
Reported-by: Chad Paradis <chad.paradis@umit.maine.edu >
Signed-off-by: Vince Weaver <vincent.weaver@maine.edu >
Acked-by: Namhyung Kim <namhyung@kernel.org >
Cc: Chad Paradis <chad.paradis@umit.maine.edu >
Cc: Ingo Molnar <mingo@redhat.com >
Cc: Namhyung Kim <namhyung@kernel.org >
Cc: Paul Mackerras <paulus@samba.org >
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl >
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1312301536150.28814@vincent-weaver-1.um.maine.edu
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2014-02-10 11:34:31 -03:00
f67697bd07
perf tools: Handle PERF_RECORD_HEADER_EVENT_TYPE properly
...
We removed event types from data file in following commits:
606521044b3c57eranian@google.com >
Signed-off-by: Jiri Olsa <jolsa@redhat.com >
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com >
Cc: David Ahern <dsahern@gmail.com >
Cc: Frederic Weisbecker <fweisbec@gmail.com >
Cc: Ingo Molnar <mingo@elte.hu >
Cc: Namhyung Kim <namhyung@kernel.org >
Cc: Paul Mackerras <paulus@samba.org >
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl >
Link: http://lkml.kernel.org/r/1391524668-12546-1-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2014-02-10 11:34:31 -03:00
981a23792c
perf probe: Do not add offset twice to uprobe address
...
Fix perf-probe not to add offset value twice to uprobe probe address
when post processing.
The tevs[i].point.address struct member is the address of symbol+offset,
but current perf-probe adjusts the point.address by adding the offset.
As a result, the probe address becomes symbol+offset+offset. This may
cause unexpected code corruption. Urgent fix is needed.
Without this fix:
---
# ./perf probe -x ./perf dso__load_vmlinux+4
# ./perf probe -l
probe_perf:dso__load_vmlinux (on 0x000000000006d2b8)
# nm ./perf.orig | grep dso__load_vmlinux\$
000000000046d0a0 T dso__load_vmlinux
---
You can see the given offset is 3 but the actual probed address is
dso__load_vmlinux+8.
With this fix:
---
# ./perf probe -x ./perf dso__load_vmlinux+4
# ./perf probe -l
probe_perf:dso__load_vmlinux (on 0x000000000006d2b4)
---
Now the problem is fixed.
Note: This bug is introduced by
commit fb7345bbf7masami.hiramatsu.pt@hitachi.com >
Cc: "David A. Long" <dave.long@linaro.org >
Cc: David Ahern <dsahern@gmail.com >
Cc: Ingo Molnar <mingo@redhat.com >
Cc: Namhyung Kim <namhyung@kernel.org >
Cc: Oleg Nesterov <oleg@redhat.com >
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com >
Cc: Steven Rostedt <rostedt@goodmis.org >
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20140205051858.6519.27314.stgit@kbuild-fedora.yrl.intra.hitachi.co.jp
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2014-02-10 11:34:30 -03:00
d3b7022029
perf buildid-cache: Check relocation when checking for existing kcore
...
perf buildid-cache does not make another copy of kcore if the buildid
and modules match an existing copy.
That does not take into account the possibility that the kernel has been
relocated.
Extend the check to check if the reference relocation symbol matches
too, otherwise do make a copy.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com >
Tested-by: Jiri Olsa <jolsa@redhat.com >
Cc: David Ahern <dsahern@gmail.com >
Cc: Frederic Weisbecker <fweisbec@gmail.com >
Cc: Ingo Molnar <mingo@redhat.com >
Cc: Jiri Olsa <jolsa@redhat.com >
Cc: Mike Galbraith <efault@gmx.de >
Cc: Namhyung Kim <namhyung@gmail.com >
Cc: Paul Mackerras <paulus@samba.org >
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl >
Cc: Stephane Eranian <eranian@google.com >
Link: http://lkml.kernel.org/r/1391004884-10334-10-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2014-01-31 17:21:54 -03:00
d9b62aba87
perf tools: Adjust kallsyms for relocated kernel
...
If the kernel is relocated at boot time, kallsyms will not match data
recorded previously.
That does not matter for modules because they are corrected anyway. It
also does not matter if vmlinux is being used for symbols. But if perf
tools has only kallsyms then the symbols will not match.
Fix by applying the delta gained by comparing the old and current
addresses of the relocation reference symbol.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com >
Tested-by: Jiri Olsa <jolsa@redhat.com >
Cc: David Ahern <dsahern@gmail.com >
Cc: Frederic Weisbecker <fweisbec@gmail.com >
Cc: Ingo Molnar <mingo@redhat.com >
Cc: Jiri Olsa <jolsa@redhat.com >
Cc: Mike Galbraith <efault@gmx.de >
Cc: Namhyung Kim <namhyung@gmail.com >
Cc: Paul Mackerras <paulus@samba.org >
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl >
Cc: Stephane Eranian <eranian@google.com >
Link: http://lkml.kernel.org/r/1391004884-10334-9-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2014-01-31 17:21:53 -03:00
c080f72753
perf tests: No need to set up ref_reloc_sym
...
Now that ref_reloc_sym is set up by machine__create_kernel_maps(), the
"vmlinux symtab matches kallsyms" test does have to do it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com >
Tested-by: Jiri Olsa <jolsa@redhat.com >
Cc: David Ahern <dsahern@gmail.com >
Cc: Frederic Weisbecker <fweisbec@gmail.com >
Cc: Ingo Molnar <mingo@redhat.com >
Cc: Jiri Olsa <jolsa@redhat.com >
Cc: Mike Galbraith <efault@gmx.de >
Cc: Namhyung Kim <namhyung@gmail.com >
Cc: Paul Mackerras <paulus@samba.org >
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl >
Cc: Stephane Eranian <eranian@google.com >
Link: http://lkml.kernel.org/r/1391004884-10334-8-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2014-01-31 17:21:52 -03:00
a00d28cb72
perf symbols: Prevent the use of kcore if the kernel has moved
...
Use of kcore is predicated upon it matching the recorded data. If the
kernel has been relocated at boot time (i.e. since the data was
recorded) then do not use kcore.
Note that it is possible to make a copy of kcore at the time the data is
recorded using 'perf buildid-cache'. Then the perf tools will use the
copy because it does match the data.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com >
Tested-by: Jiri Olsa <jolsa@redhat.com >
Cc: David Ahern <dsahern@gmail.com >
Cc: Frederic Weisbecker <fweisbec@gmail.com >
Cc: Ingo Molnar <mingo@redhat.com >
Cc: Jiri Olsa <jolsa@redhat.com >
Cc: Mike Galbraith <efault@gmx.de >
Cc: Namhyung Kim <namhyung@gmail.com >
Cc: Paul Mackerras <paulus@samba.org >
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl >
Cc: Stephane Eranian <eranian@google.com >
Link: http://lkml.kernel.org/r/1391004884-10334-7-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2014-01-31 17:21:51 -03:00
0ae617bedd
perf record: Get ref_reloc_sym from kernel map
...
Now that ref_reloc_sym is set up when the kernel map is created,
'perf record' does not need to pass the symbol names to
perf_event__synthesize_kernel_mmap() which can read the values needed
from ref_reloc_sym directly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com >
Tested-by: Jiri Olsa <jolsa@redhat.com >
Cc: David Ahern <dsahern@gmail.com >
Cc: Frederic Weisbecker <fweisbec@gmail.com >
Cc: Ingo Molnar <mingo@redhat.com >
Cc: Jiri Olsa <jolsa@redhat.com >
Cc: Mike Galbraith <efault@gmx.de >
Cc: Namhyung Kim <namhyung@gmail.com >
Cc: Paul Mackerras <paulus@samba.org >
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl >
Cc: Stephane Eranian <eranian@google.com >
Link: http://lkml.kernel.org/r/1391004884-10334-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2014-01-31 17:21:50 -03:00
5512cf24be
perf machine: Set up ref_reloc_sym in machine__create_kernel_maps()
...
The ref_reloc_sym is always needed for the kernel map in order to check
for relocation. Consequently set it up when the kernel map is created.
Otherwise it was only being set up by 'perf record'.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com >
Tested-by: Jiri Olsa <jolsa@redhat.com >
Cc: David Ahern <dsahern@gmail.com >
Cc: Frederic Weisbecker <fweisbec@gmail.com >
Cc: Ingo Molnar <mingo@redhat.com >
Cc: Jiri Olsa <jolsa@redhat.com >
Cc: Mike Galbraith <efault@gmx.de >
Cc: Namhyung Kim <namhyung@gmail.com >
Cc: Paul Mackerras <paulus@samba.org >
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl >
Cc: Stephane Eranian <eranian@google.com >
Link: http://lkml.kernel.org/r/1391004884-10334-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2014-01-31 17:21:49 -03:00
15a0a8706c
perf machine: Add machine__get_kallsyms_filename()
...
Separate out the logic used to make the kallsyms full path name for a
machine. It will be reused in a subsequent patch.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com >
Tested-by: Jiri Olsa <jolsa@redhat.com >
Cc: David Ahern <dsahern@gmail.com >
Cc: Frederic Weisbecker <fweisbec@gmail.com >
Cc: Ingo Molnar <mingo@redhat.com >
Cc: Jiri Olsa <jolsa@redhat.com >
Cc: Mike Galbraith <efault@gmx.de >
Cc: Namhyung Kim <namhyung@gmail.com >
Cc: Paul Mackerras <paulus@samba.org >
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl >
Cc: Stephane Eranian <eranian@google.com >
Link: http://lkml.kernel.org/r/1391004884-10334-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2014-01-31 17:21:48 -03:00
29b596b574
perf tools: Add kallsyms__get_function_start()
...
Separate out the logic used to find the start address of the reference
symbol used to track kernel relocation. kallsyms__get_function_start()
is used in subsequent patches.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com >
Tested-by: Jiri Olsa <jolsa@redhat.com >
Cc: David Ahern <dsahern@gmail.com >
Cc: Frederic Weisbecker <fweisbec@gmail.com >
Cc: Ingo Molnar <mingo@redhat.com >
Cc: Jiri Olsa <jolsa@redhat.com >
Cc: Mike Galbraith <efault@gmx.de >
Cc: Namhyung Kim <namhyung@gmail.com >
Cc: Paul Mackerras <paulus@samba.org >
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl >
Cc: Stephane Eranian <eranian@google.com >
Link: http://lkml.kernel.org/r/1391004884-10334-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2014-01-31 17:21:47 -03:00
9176753d1e
perf symbols: Fix symbol annotation for relocated kernel
...
Kernel maps map memory addresses to file offsets.
For symbol annotation, objdump needs the object VMA addresses. For an
unrelocated kernel, that is the same as the memory address.
The addresses passed to objdump for symbol annotation did not take into
account kernel relocation.
This patch fixes that.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org >
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com >
Tested-by: Jiri Olsa <jolsa@redhat.com >
Cc: David Ahern <dsahern@gmail.com >
Cc: Frederic Weisbecker <fweisbec@gmail.com >
Cc: Ingo Molnar <mingo@redhat.com >
Cc: Jiri Olsa <jolsa@redhat.com >
Cc: Mike Galbraith <efault@gmx.de >
Cc: Namhyung Kim <namhyung@gmail.com >
Cc: Paul Mackerras <paulus@samba.org >
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl >
Cc: Stephane Eranian <eranian@google.com >
Link: http://lkml.kernel.org/r/1391004884-10334-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2014-01-31 17:21:47 -03:00
Jiri Olsa
Arnaldo Carvalho de Melo
Ben Hutchings
Vince Weaver
Masami Hiramatsu
Adrian Hunter