Commit Graph

1316 Commits

Author SHA1 Message Date
Nicholas Bellinger 26a99c19f8 iscsi-target: Fix potential dead-lock during node acl delete
This patch is a iscsi-target specific bug-fix for a dead-lock
that can occur during explicit struct se_node_acl->acl_group
se_session deletion via configfs rmdir(2), when iscsi-target
time2retain timer is still active.

It changes iscsi-target to obtain se_portal_group->session_lock
internally using spin_in_locked() to check for the specific
se_node_acl configfs shutdown rmdir(2) case.

Note this patch is intended for stable, and the subsequent
v4.5-rc patch converts target_core_tpg.c to use proper
se_sess->sess_kref reference counting for both se_node_acl
deletion + se_node_acl->queue_depth se_session restart.

Reported-by:: Sagi Grimberg <sagig@mellanox.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Andy Grover <agrover@redhat.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-20 01:33:55 -08:00
Nicholas Bellinger 7fbef3d0c2 tcm_fc: Convert acl lookup to modern get_initiator_node_acl usage
This patch does a simple conversion of tcm_fc code to use
proper modern core_tpg_get_initiator_node_acl() lookup using
se_node_acl->acl_kref, and drops the legacy list walk from
ft_acl_get().

Note the original lookup also took node_name into account,
but since ft_init_nodeacl() only ever sets port_name for
se_node_acl->acl_group within configfs, this is purely
a mechanical change.

As per HCH, go ahead and fold ft_acl_get() into original
caller.

Cc: Vasu Dev <vasu.dev@linux.intel.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-12 23:17:51 -08:00
Bart Van Assche de7ee9a20c tcm_fc: Wait for command completion before freeing a session
This patch avoids that the following kernel crash can occur with
later patches in this patch series:

general protection fault: 0000 [#1] SMP
CPU: 0 PID: 6 Comm: kworker/u8:0 Not tainted 4.3.0-rc1-debug+ #1
Workqueue: tmr-fileio target_tmr_work [target_core_mod]
Call Trace:
 [<ffffffff810a6915>] lock_acquire+0x65/0x90
 [<ffffffff815e740b>] _raw_spin_lock_irqsave+0x4b/0x60
 [<ffffffffa03bc7ca>] target_release_cmd_kref+0x2a/0xa0 [target_core_mod]
 [<ffffffffa03bd418>] target_put_sess_cmd+0x28/0x50 [target_core_mod]
 [<ffffffffa03bad50>] core_tmr_lun_reset+0x390/0x640 [target_core_mod]
 [<ffffffffa03bce50>] target_tmr_work+0x80/0xd0 [target_core_mod]
 [<ffffffff81070e6d>] process_one_work+0x19d/0x430
 [<ffffffff8107120f>] worker_thread+0x10f/0x460
 [<ffffffff810772ba>] kthread+0xea/0x100
 [<ffffffff815e7a2f>] ret_from_fork+0x3f/0x70

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-07 13:57:55 -08:00
Bart Van Assche f0a8afecb2 target: Fix a memory leak in target_dev_lba_map_store()
strsep() modifies its first argument. Make the pointer passed to kfree()
match the return value of kmalloc().

Fixes: 229d4f112f (commit "target_core_alua: Referrals configfs integration")
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Andy Grover <agrover@redhat.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-07 13:57:55 -08:00
Bart Van Assche 5261d86c5c target: Support aborting tasks with a 64-bit tag
Avoid truncating the tag argument of target_submit_tmr() to a
32-bit number if the caller passes a 64-bit number.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Andy Grover <agrover@redhat.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-07 13:57:54 -08:00
Bart Van Assche dba5ccc7a6 target: Remove an unused variable
The num_node_acls member in struct se_portal_group is modified
by several functions but is never read. Hence remove it.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Andy Grover <agrover@redhat.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-07 13:57:53 -08:00
Bart Van Assche 9b3118ce8a target: Fix indentation in target_core_configfs.c
Detected by smatch.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Andy Grover <agrover@redhat.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-07 13:57:52 -08:00
Sheng Yang 81ee28de86 target/user: Allow user to set block size before enabling device
The capability of setting hw_block_size was added along with 9c1cd1b68
"target/user: Only support full command pass-through", though default
setting override the user specified value during the enabling of device,
which called by target_configure_device() to set block_size matching
hw_block_size, result in user not able to set different block size other
than default 512.

This patch would use existing hw_block_size value if already set, otherwise
it would be set to default value(512).

Update: Fix the coding style issue.

(Drop unnecessary re-export of dev->dev_attrib.block_size - nab)

Signed-off-by: Sheng Yang <sheng@yasker.org>
Cc: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-07 13:57:51 -08:00
Andy Grover 091b70623e target/fcoe: Add tag support to tcm_fc
Add the 'tag' attribute to FC node ACLs. This is not used by kernel code,
but gives userspace a place to store a tag string. This is used to provide
support for initiator groups in targetcli.

Just copy iscsi's implementation for tcm_fc. A few other fabrics that
support acls also need this, to be submitted separately after the holidays.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-07 13:57:50 -08:00
Quinn Tran fb3269baf4 qla2xxx: Add selective command queuing
queue work element to specific process lessen cache miss

Signed-off-by: Quinn Tran <quinn.tran@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-07 13:57:47 -08:00
Geliang Tang b75d8063c0 target: use offset_in_page macro
Use offset_in_page macro instead of (addr & ~PAGE_MASK).

Signed-off-by: Geliang Tang <geliangtang@163.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-06 13:39:59 -08:00
Christophe Vu-Brugier 234bdbc49d target: fix deprecated attribute names in dmesg
The following message is displayed in dmesg when a deprecated attribute
is set:

  "ignoring deprecated ##_name## attribute"

This patch fixes the format to include the name of the deprecated
attribute.

Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-06 13:39:57 -08:00
Jamie Pocas e6f41633cb target/sbc: Add LBPRZ attribute + control CDB emulation
This change sets the LBPRZ flag in EVPD page b2h and READ CAPACITY (16)
based on a new unmap_zeroes_data device attribute. This flag is set
automatically for iblock based on underlying block device queue's
discard_zeroes_data flag.

Signed-off-by: Jamie Pocas <jamie.pocas@emc.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-06 13:39:55 -08:00
Bart Van Assche ef8f46b549 sbp-target: Remove a superfluous forward declaration
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Acked-by: Chris Boot <bootc@bootc.net>
Reviewed-by: Andy Grover <agrover@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-06 13:39:53 -08:00
Bart Van Assche 5a3425210c iscsi-target: Fix indentation + spelling + unreachable code
Modify indentation such that the 'smatch' tool no longer complains
about incorrect indentation + unreachable code.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-06 13:39:19 -08:00
Bart Van Assche ac75d8be9b target: Fix spelling + remove set-but-not-used variables
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Andy Grover <agrover@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-06 13:38:37 -08:00
Krzysztof Opasiak 9a9e3415ed fs: configfs: Drop unused parameter from configfs_undepend_item()
subsys parameter is never used by configfs_undepend_item()
so there is no point in passing it to this function.

Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-12-20 18:03:57 -08:00
Sheng Yang 2628b352c3 tcm_loop: Show address of tpg in configfs
In the past, the scsi_host's number wasn't shown anywhere, user have
to depends on vpg_83 to find the block device, which is also depends
on backstore implementation.

It's better for tcm_loop to provide necessary straightforward
information on locate the block device it created.

This patch would help to locate the block device created by tcm_loop.
The address would be shown at e.g.

  /sys/kernel/config/target/loopback/naa.60014059436855c1/tpgt_1/address

which would looks like "2:0:1", and the lun number can be found at
"/tpgt_1/lun/lun_0".  Altogether they formated the scsi address of
device as "2:0:1:0", which can be used to locate the device easily
through 'lsscsi'.

(Update to >= v4.4-rc1 configfs attribute usage - nab)

Signed-off-by: Sheng Yang <sheng@yasker.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-11-29 03:01:45 -08:00
Linus Torvalds d83763f4a6 Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull final round of SCSI updates from James Bottomley:
 "Sorry for the delay in this patch which was mostly caused by getting
  the merger of the mpt2/mpt3sas driver, which was seen as an essential
  item of maintenance work to do before the drivers diverge too much.
  Unfortunately, this caused a compile failure (detected by linux-next),
  which then had to be fixed up and incubated.

  In addition to the mpt2/3sas rework, there are updates from pm80xx,
  lpfc, bnx2fc, hpsa, ipr, aacraid, megaraid_sas, storvsc and ufs plus
  an assortment of changes including some year 2038 issues, a fix for a
  remove before detach issue in some drivers and a couple of other minor
  issues"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits)
  mpt3sas: fix inline markers on non inline function declarations
  sd: Clear PS bit before Mode Select.
  ibmvscsi: set max_lun to 32
  ibmvscsi: display default value for max_id, max_lun and max_channel.
  mptfusion: don't allow negative bytes in kbuf_alloc_2_sgl()
  scsi: pmcraid: replace struct timeval with ktime_get_real_seconds()
  mvumi: 64bit value for seconds_since1970
  be2iscsi: Fix bogus WARN_ON length check
  scsi_scan: don't dump trace when scsi_prep_async_scan() is called twice
  mpt3sas: Bump mpt3sas driver version to 09.102.00.00
  mpt3sas: Single driver module which supports both SAS 2.0 & SAS 3.0 HBAs
  mpt2sas, mpt3sas: Update the driver versions
  mpt3sas: setpci reset kernel oops fix
  mpt3sas: Added OEM Gen2 PnP ID branding names
  mpt3sas: Refcount fw_events and fix unsafe list usage
  mpt3sas: Refcount sas_device objects and fix unsafe list usage
  mpt3sas: sysfs attribute to report Backup Rail Monitor Status
  mpt3sas: Ported WarpDrive product SSS6200 support
  mpt3sas: fix for driver fails EEH, recovery from injected pci bus error
  mpt3sas: Manage MSI-X vectors according to HBA device type
  ...
2015-11-13 20:35:54 -08:00
Linus Torvalds 9aa3d651a9 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Pull SCSI target updates from Nicholas Bellinger:
 "This series contains HCH's changes to absorb configfs attribute
  ->show() + ->store() function pointer usage from it's original
  tree-wide consumers, into common configfs code.

  It includes usb-gadget, target w/ drivers, netconsole and ocfs2
  changes to realize the improved simplicity, that now renders the
  original include/target/configfs_macros.h CPP magic for fabric drivers
  and others, unnecessary and obsolete.

  And with common code in place, new configfs attributes can be added
  easier than ever before.

  Note, there are further improvements in-flight from other folks for
  v4.5 code in configfs land, plus number of target fixes for post -rc1
  code"

In the meantime, a new user of the now-removed old configfs API came in
through the char/misc tree in commit 7bd1d4093c ("stm class: Introduce
an abstraction for System Trace Module devices").

This merge resolution comes from Alexander Shishkin, who updated his stm
class tracing abstraction to account for the removal of the old
show_attribute and store_attribute methods in commit 517982229f
("configfs: remove old API") from this pull.  As Alexander says about
that patch:

 "There's no need to keep an extra wrapper structure per item and the
  awkward show_attribute/store_attribute item ops are no longer needed.

  This patch converts policy code to the new api, all the while making
  the code quite a bit smaller and easier on the eyes.

  Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>"

That patch was folded into the merge so that the tree should be fully
bisectable.

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (23 commits)
  configfs: remove old API
  ocfs2/cluster: use per-attribute show and store methods
  ocfs2/cluster: move locking into attribute store methods
  netconsole: use per-attribute show and store methods
  target: use per-attribute show and store methods
  spear13xx_pcie_gadget: use per-attribute show and store methods
  dlm: use per-attribute show and store methods
  usb-gadget/f_serial: use per-attribute show and store methods
  usb-gadget/f_phonet: use per-attribute show and store methods
  usb-gadget/f_obex: use per-attribute show and store methods
  usb-gadget/f_uac2: use per-attribute show and store methods
  usb-gadget/f_uac1: use per-attribute show and store methods
  usb-gadget/f_mass_storage: use per-attribute show and store methods
  usb-gadget/f_sourcesink: use per-attribute show and store methods
  usb-gadget/f_printer: use per-attribute show and store methods
  usb-gadget/f_midi: use per-attribute show and store methods
  usb-gadget/f_loopback: use per-attribute show and store methods
  usb-gadget/ether: use per-attribute show and store methods
  usb-gadget/f_acm: use per-attribute show and store methods
  usb-gadget/f_hid: use per-attribute show and store methods
  ...
2015-11-13 20:04:17 -08:00
Christoph Hellwig 64d513ac31 scsi: use host wide tags by default
This patch changes the !blk-mq path to the same defaults as the blk-mq
I/O path by always enabling block tagging, and always using host wide
tags.  We've had blk-mq available for a few releases so bugs with
this mode should have been ironed out, and this ensures we get better
coverage of over tagging setup over different configs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-11-09 17:11:57 -08:00
Martin K. Petersen 0f8087ecde block: Consolidate static integrity profile properties
We previously made a complete copy of a device's data integrity profile
even though several of the fields inside the blk_integrity struct are
pointers to fixed template entries in t10-pi.c.

Split the static and per-device portions so that we can reference the
template directly.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reported-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-21 14:42:38 -06:00
Christoph Hellwig 2eafd72939 target: use per-attribute show and store methods
This also allows to remove the target-specific old configfs macros, and
gets rid of the target_core_fabric_configfs.h header which only had one
function declaration left that could be moved to a better place.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Nicholas Bellinger <nab@linux-iscsi.org>
Acked-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-10-13 22:17:49 -07:00
Nicholas Bellinger 673681cafa iscsi-target: Avoid OFMarker + IFMarker negotiation
This patch fixes a v4.2+ regression introduced by commit c04a6091
that removed support for obsolete sync-and-steering markers usage
as originally defined in RFC-3720.

The regression would involve attempting to send OFMarker=No +
IFMarker=No keys during opertional negotiation login phase,
including when initiators did not actually propose these keys.

The result for MSFT iSCSI initiators would be random junk in
TCP stream after the last successful login request was been sent
signaling the move to full feature phase (FFP) operation.

To address this bug, go ahead and avoid negotiating these keys
by default unless the initiator explicitly proposes them, but
still respond to them with 'No' if they are proposed.

Reported-by: Dragan Milivojević <galileo@pkm-inc.com>
Bisected-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Tested-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-09-24 23:24:46 -07:00
Nicholas Bellinger 8fa3a86748 target: Make TCM_WRITE_PROTECT failure honor D_SENSE bit
This patch changes transport_lookup_cmd_lun() to obtain
se_lun->lun_ref + se_cmd->se_device rcu_dereference during
TCM_WRITE_PROTECT -> CHECK_CONDITION failure status.

Do this to ensure the active control D_SENSE mode page bit
is being honored.

Reported-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-09-24 23:17:27 -07:00