The object palm_bk3710_port_info of type ide_port_info is never
referenced anywhere after initialization by palm_bk3710_probe. It is
also passed as a parameter to ide_host_add which is called from the init
function but this call doesn't store the object reference anywhere, and
it only dereferences the values of the fields. Therefore add __initdata
to its declaration.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current display code assumes that v4 minor version 0 is tracked by
the call to nfsd_vers(). Now it is tracked by nfsd_minorversion(), and
so we need to adjust the display code.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When the user turns off all minor versions of NFSv4, that should be
equivalent to turning off NFSv4 support, so a mount attempt using NFSv4
should get RPC_PROG_MISMATCH, not NFSERR_MINOR_VERS_MISMATCH.
Allow the user to use either '4.0' or '4' to enable or disable minor
version 0. Other minor versions are still enabled or disabled using the
'4.x' format.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Pull another tracing update from Steven Rostedt:
"Commit 79c6f448c8 ("tracing: Fix hwlat kthread migration") fixed a
bug that was caused by a race condition in initializing the hwlat
thread. When fixing this code, I realized that it should have been
done differently. Instead of doing the rewrite and sending that to
stable, I just sent the above commit to fix the bug that should be
back ported.
This commit is on top of the quick fix commit to rewrite the code the
way it should have been written in the first place"
* tag 'trace-v4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Clean up the hwlat binding code
Pull tracing updates from Steven Rostedt:
"This release has no new tracing features, just clean ups, minor fixes
and small optimizations"
* tag 'trace-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (25 commits)
tracing: Remove outdated ring buffer comment
tracing/probes: Fix a warning message to show correct maximum length
tracing: Fix return value check in trace_benchmark_reg()
tracing: Use modern function declaration
jump_label: Reduce the size of struct static_key
tracing/probe: Show subsystem name in messages
tracing/hwlat: Update old comment about migration
timers: Make flags output in the timer_start tracepoint useful
tracing: Have traceprobe_probes_write() not access userspace unnecessarily
tracing: Have COMM event filter key be treated as a string
ftrace: Have set_graph_function handle multiple functions in one write
ftrace: Do not hold references of ftrace_graph_{notrace_}hash out of graph_lock
tracing: Reset parser->buffer to allow multiple "puts"
ftrace: Have set_graph_functions handle write with RDWR
ftrace: Reset fgd->hash in ftrace_graph_write()
ftrace: Replace (void *)1 with a meaningful macro name FTRACE_GRAPH_EMPTY
ftrace: Create a slight optimization on searching the ftrace_hash
tracing: Add ftrace_hash_key() helper function
ftrace: Convert graph filter to use hash tables
ftrace: Expose ftrace_hash_empty and ftrace_lookup_ip
...
Geminilake HDMI codec 0x280d is similar to previous platforms, so add it with
similar ops as previous.
Signed-off-by: Senthilnathan Veppur <senthilnathanx.veppur@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Yuval Mintz says:
====================
qed: Bug fixes
Patch #1 addresses a day-one race which is dependent on the number of Vfs
[I.e., more child VFs from a single PF make it more probable].
Patch #2 corrects a race that got introduced in the last set of fixes for
qed, one that would happen each time PF transitions to UP state.
I've built & tested those against current net-next.
Please consider applying the series there.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 653d2ffd6405 ("qed*: Fix link indication race") introduced another
race - one of the inner functions called from the link-change flow is
explicitly using the slowpath context dedicated PTT instead of gaining
that PTT from the caller. Since this flow can now be called from
a different context as well, we're in risk of the PTT breaking.
Fixes: 653d2ffd6405 ("qed*: Fix link indication race")
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A PF syncronizes all IOV activity relating to its VFs
by using a single workqueue handling the work.
The workqueue would reach a bitmask of pending VF events
and act upon each in turn.
Problem is that the indication of a VF message [which sets
the 'vf event' bit for that VF] arrives and is set in
the slowpath attention context, which isn't syncronized with
the processing of the events.
When multiple VFs are present, it's possible that PF would
lose the indication of one of the VF's pending evens, leading
that VF to later timeout.
Instead of adding locks/barriers, simply move from a bitmask
into a per-VF indication inside that VF entry in the PF database.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains netfilter fixes for you net tree,
they are:
1) Missing ct zone size in the nft_ct initialization path, patch
from Florian Westphal.
2) Two patches for netfilter uapi headers, one to remove unnecessary
sysctl.h inclusion and another to fix compilation of xt_hashlimit.h
in userspace, from Dmitry V. Levin.
3) Patch to fix a sloppy change in nf_ct_expect that incorrectly
simplified nf_ct_expect_related_report() in the previous nf-next
batch. This also includes another patch for __nf_ct_expect_check()
to report success by returning 0 to keep it consistent with other
existing functions. From Jarno Rajahalme.
4) The ->walk() iterator of the new bitmap set type goes over the real
bitmap size, this results in incorrect dumps when NFTA_SET_USERDATA
is used.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
On this machine, the micmute button is connected to Line2 of the
codec and the micmute led is connected to GPIO2 of the codec.
After applying this quirk, both hotkey and led work well.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
l2tp_ip_backlog_recv may not return -1 if the packet gets dropped.
The return value is passed up to ip_local_deliver_finish, which treats
negative values as an IP protocol number for resubmission.
Signed-off-by: Paul Hüber <phueber@kernsp.in>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix xfrm_neigh_lookup to provide dst->path to the
neigh_lookup dst_ops method.
When skb is provided, the IP address in packet should already
match the dst->path address family. But for the non-skb case,
we should consider the last tunnel address as nexthop address.
Fixes: f894cbf847 ("net: Add optional SKB arg to dst_ops->neigh_lookup().")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current annotation is wrong as it says that we're only called
under spinlock. In fact it should be marked as under either
spinlock or RCU read lock.
Fixes: da20420f83 ("rhashtable: Add nested tables")
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter reported a use before NULL check bug in the function
bucket_table_free. In fact we don't need the NULL check at all as
no caller can provide a NULL argument. So this patch fixes this by
simply removing it.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Calls made through the in-kernel interface can end up getting stuck because
of a missed variable update in a loop in rxrpc_recvmsg_data(). The problem
is like this:
(1) A new packet comes in and doesn't cause a notification to be given to
the client as there's still another packet in the ring - the
assumption being that if the client will keep drawing off data until
the ring is empty.
(2) The client is in rxrpc_recvmsg_data(), inside the big while loop that
iterates through the packets. This copies the window pointers into
variables rather than using the information in the call struct
because:
(a) MSG_PEEK might be in effect;
(b) we need a barrier after reading call->rx_top to pair with the
barrier in the softirq routine that loads the buffer.
(3) The reading of call->rx_top is done outside of the loop, and top is
never updated whilst we're in the loop. This means that even through
there's a new packet available, we don't see it and may return -EFAULT
to the caller - who will happily return to the scheduler and await the
next notification.
(4) No further notifications are forthcoming until there's an abort as the
ring isn't empty.
The fix is to move the read of call->rx_top inside the loop - but it needs
to be done before the condition is checked.
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When tc actions are loaded as a module and no actions have been installed,
flushing them would result in actions removed from the memory, but modules
reference count not being decremented, so that the modules would not be
unloaded.
Following is example with GACT action:
% sudo modprobe act_gact
% lsmod
Module Size Used by
act_gact 16384 0
%
% sudo tc actions ls action gact
%
% sudo tc actions flush action gact
% lsmod
Module Size Used by
act_gact 16384 1
% sudo tc actions flush action gact
% lsmod
Module Size Used by
act_gact 16384 2
% sudo rmmod act_gact
rmmod: ERROR: Module act_gact is in use
....
After the fix:
% lsmod
Module Size Used by
act_gact 16384 0
%
% sudo tc actions add action pass index 1
% sudo tc actions add action pass index 2
% sudo tc actions add action pass index 3
% lsmod
Module Size Used by
act_gact 16384 3
%
% sudo tc actions flush action gact
% lsmod
Module Size Used by
act_gact 16384 0
%
% sudo tc actions flush action gact
% lsmod
Module Size Used by
act_gact 16384 0
% sudo rmmod act_gact
% lsmod
Module Size Used by
%
Fixes: f97017cdef ("net-sched: Fix actions flushing")
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This allows to enable and run the accompanying test (test_parman)
without dependencies on other users of parman.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 5e1859fbcc ("ipv4: ipmr: various fixes and cleanups") fixed
the issue for ipv4 ipmr:
ip_mroute_setsockopt() & ip_mroute_getsockopt() should not
access/set raw_sk(sk)->ipmr_table before making sure the socket
is a raw socket, and protocol is IGMP
The same fix should be done for ipv6 ipmr as well.
This patch can fix the panic caused by overwriting the same offset
as ipmr_table as in raw_sk(sk) when accessing other type's socket
by ip_mroute_setsockopt().
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit b8607805dd ("sctp: not copying duplicate addrs to the assoc's
bind address list") tried to check for duplicate address before copying
to asoc's bind_addr list from global addr list.
But all the addrs' sin_ports in global addr list are 0 while the addrs'
sin_ports are bp->port in asoc's bind_addr list. It means even if it's
a duplicate address, af->cmp_addr will still return 0 as the their
sin_ports are different.
This patch is to fix it by setting the sin_port for addr param with
bp->port before comparing the addrs.
Fixes: b8607805dd ("sctp: not copying duplicate addrs to the assoc's bind address list")
Reported-by: Wei Chen <weichen@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
vmware tools has a daemon that gets layout information from the GUI and
forwards it to DRM so that the modesetting code can set preferred connector
locations and modes. This daemon was using control nodes but since control
nodes were just removed, make it possible for the daemon to use render- or
primary nodes instead. This is a bit ugly but will allow drm to proceed with
removal of the mostly unused control-node code and allow vmware to proceed
with fixing up automatic layout settings for gnome-shell/wayland.
We bump minor to inform user-space about the api change.
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170221104227.2854-1-thellstrom@vmware.com
Pull watchdog updates from Guenter Roeck:
"Wim asked me to handle the watchdog pull request this time around.
Key changes:
- New drivers: Cortina Gemini, ZTE's zx2967 family, NIC7018
- Convert to use device managed functions: ebc-c384_wdt, tegra_wdt,
da9063_wdt, da9062_wdt, da9055_wdt, da9052_wdt, bcm2835_wdt,
mena21_wdt, wm831x_wdt, digicolor_wdt, intel-mid_wdt, meson_wdt,
sunxi_wdt, aspeed_wdt, coh901327_wdt, iTCO_wdt
- Use watchdog core to install restart handler: tangox, dw_wdt,
bcm2835_wdt, asm9260_wdt, bcm47xx_wdt
- Convert ts72xx_wdt driver to watchdog core
- Let core handle heartbeat in ep93xx_wdt driver
- Enable COMPILE_TEST where possible
- Various other improvements"
* tag 'watchdog-for-linus-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (54 commits)
watchdog: s3c2410: Add prefix to local function
watchdog: s3c2410: Select MFD_SYSCON on all Exynos platforms
watchdog: s3c2410: Use dev_dbg instead of pr_info
watchdog: s3c2410: Fix infinite interrupt in soft mode
watchdog: s3c2410: Remove confusing CONFIG prefix from local defines
watchdog: softdog: make pretimeout support a compile option
watchdog: zx2967: add watchdog controller driver for ZTE's zx2967 family
dt: bindings: add documentation for zx2967 family watchdog controller
watchdog: sama5d4: Implement resume hook
watchdog: sama5d4: Cache MR instead of a partial config
watchdog: ts72xx_wdt: convert driver to watchdog core
watchdog: ep93xx_wdt: cleanup and let the core handle the heartbeat
watchdog: RDC321X_WDT always depends on PCI
watchdog: add driver for Cortina Gemini watchdog
watchdog: add DT bindings for Cortina Gemini
watchdog: constify watchdog_ops structures
watchdog: Introduce watchdog_stop_on_unregister helper
watchdog: ebc-c384_wdt: Utilize devm_ functions in driver probe callback
watchdog: tegra_wdt: Convert to use device managed functions
watchdog: da9063_wdt: Convert to use device managed functions
...
The cited commit makes a great job of finding optimal shift/multiplier
values assuming a 10 seconds wrap around, but forgot to change the
overflow_period computation.
It overflows in cyclecounter_cyc2ns(), and the final result is 804 ms,
which is silly.
Lets simply use 5 seconds, no need to recompute this, given how it is
supposed to work.
Later, we will use a timer instead of a work queue, since the new RX
allocation schem will no longer need mlx4_en_recover_from_oom() and the
service_task firing every 250 ms.
Fixes: 31c128b66e ("net/mlx4_en: Choose time-stamping shift value according to HW frequency")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tariq Toukan <tariqt@mellanox.com>
Cc: Eugenia Emantayev <eugenia@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bhumika Goyal
Trond Myklebust
Linus Torvalds
Vinod Koul
David S. Miller
Mintz, Yuval
Marek Szyprowski
Hui Wang
Paul Hüber
Julian Anastasov
Herbert Xu
Roman Mashak
David Howells
Geert Uytterhoeven
Xin Long
Thomas Hellstrom
Eric Dumazet