Pull thermal fixes from Zhang Rui:
"Specifics:
- fix an issue in intel_powerclamp driver that idle injection target
is not accurately maintained on newer Intel CPUs. Package C8 to
C10 states are introduced on these CPUs but they were not included
in the package c-state residency calculation. From Jacob Pan.
- fix a problem that package c-state idle injection was missing on
Broadwell server, by adding its id to intel_powerclamp driver.
From Jacob Pan.
- a couple of small fixes and cleanups from Joe Perches, Mathias
Krause, Dan Carpenter and Anand Moon"
* 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
tools/thermal: tmon: fixed the 'make install' command
thermal: rockchip: fix an error code
thermal/powerclamp: fix missing newer package c-states
thermal/intel_powerclamp: add id for broadwell server
thermal/intel_powerclamp: add __init / __exit annotations
thermal: Use bool function return values of true/false not 1/0
Pull kselftest fixes from Shuah Khan:
"Urgent fix for Kselftest regression introduced in 4.1-rc1 by the new
x86 test due to its hard dependency on 32-bit build environment.
A set of 5 patches fix the make kselftest run and kselftest install"
* tag 'linux-kselftest-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests, x86: Rework x86 target architecture detection
selftests, x86: Remove useless run_tests rule
selftests/x86: install tests
selftest/x86: have no dependency on all when cross building
selftest/x86: build both bitnesses
Pull parisc fixes from Helge Deller:
"One important patch which fixes crashes due to stack randomization on
architectures where the stack grows upwards (currently parisc and
metag only).
This bug went unnoticed on parisc since kernel 3.14 where the flexible
mmap memory layout support was added by commit 9dabf60dc4. The
changes in fs/exec.c are inside an #ifdef CONFIG_STACK_GROWSUP section
and will not affect other platforms.
The other two patches rename args of the kthread_arg() function and
fixes a printk output"
* 'parisc-4.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc,metag: Fix crashes due to stack randomization on stack-grows-upwards architectures
parisc: copy_thread(): rename 'arg' argument to 'kthread_arg'
parisc: %pf is only for function pointers
cpu_set was removed (along with a bunch of cpumask helpers) by
commit 2f0f267ea0 ("cpumask: remove deprecated functions.").
Fix this by replacing cpu_set with cpumask_set_cpu. Without this
fix the following error is triggered when CONFIG_MIPS_MT_FPAFF=y.
arch/mips/kernel/smp-cps.c: In function 'cps_smp_setup':
arch/mips/kernel/smp-cps.c:95:3: error: implicit declaration of function 'cpu_set' [-Werror=implicit-function-declaration]
Fixes: 90db024f14 ("MIPS: smp-cps: cpu_set FPU mask if FPU present")
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Acked-by: Niklas Cassel <niklass@axis.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9912/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Pull x86 build fix from Ingo Molnar:
"A bzImage build fix on older distros"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vdso: Fix 'make bzImage' on older distros
Pull scheduler fixes from Ingo Molnar:
"Two fixes: a suspend/resume related regression fix, and an RT priority
boosting fix"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Fix regression in cpuset_cpu_inactive() for suspend
sched: Handle priority boosted tasks proper in setscheduler()
Pull perf fixes from Ingo Molnar:
"Mostly tooling fixes, but also a lockdep annotation fix, a PMU event
list fix and a new model addition"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools/liblockdep: Fix compilation error
tools/liblockdep: Fix linker error in case of cross compile
perf tools: Use getconf to determine number of online CPUs
tools: Fix tools/vm build
perf/x86/rapl: Enable Broadwell-U RAPL support
perf/x86/intel: Fix SLM cache event list
perf: Annotate inherited event ctx->mutex recursion
Pull irq fix from Ingo Molnar:
"A tegra irqchip driver memory corruption fix"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: tegra: Set the proper base address in irq chip data
Pull drm fixes from Dave Airlie:
"Radeon:
one oops fix, one bug fix, one pci id addition patch
i915:
one suspend/resume regression fix.
All seems quiet enough."
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/radeon: don't do mst probing if MST isn't enabled.
drm/radeon: add new bonaire pci id
drm/radeon: fix VM_CONTEXT*_PAGE_TABLE_END_ADDR handling
drm/i915: Avoid GPU hang when coming out of s3 or s4
Merge misc fixes from Andrew Morton:
"8 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm, numa: really disable NUMA balancing by default on single node machines
MAINTAINERS: update Jingoo Han's email address
CMA: page_isolation: check buddy before accessing it
uidgid: make uid_valid and gid_valid work with !CONFIG_MULTIUSER
kernfs: do not account ino_ida allocations to memcg
gfp: add __GFP_NOACCOUNT
tools/vm: fix page-flags build
drivers/rtc/rtc-armada38x.c: remove unused local `flags'
Merge "Samsung 2nd fixes for v4.1" from Kukjin Kim:
- fix second S2R on exynos4412 based Trats2, Odroid U3 boards which
happened after enabling L2$ and caused by commit 13cfa6c4f7 ("ARM:
EXYNOS: Fix CPU idle clock down after CPU off")
And replace the soc_is_exynosxxx() macro with of_compatible_xxx
- fix dereference of ERR_PTR of of_genpd_get_from_provider()
- fix suspend problem on old DT machines to skip the initialization
suspend and caused by commit 8b283c0254 ("ARM: exynos4/5: convert
pmu wakeup to stacked domains")
- add keep-power-in-suspend for Peach Boards to support S2R and has
been missed in previous pull-request for fixes
* tag 'samsung-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: EXYNOS: Use of_machine_is_compatible instead of soc_is_exynos4
ARM: EXYNOS: Fix failed second suspend on Exynos4
ARM: EXYNOS: Fix dereference of ERR_PTR returned by of_genpd_get_from_provider
ARM: EXYNOS: Don't try to initialize suspend on old DT
ARM: dts: Add keep-power-in-suspend to WiFi SDIO node for Peach Boards
Merge "mvebu fixes for 4.1 (part 2)" from Gregory CLEMENT:
Fix the main PLL frequency on Armada 375, 38x and 39x SoCs
Add clock-names to CuBox Si5351 clk generator
Add dts entries in the MAINTAINERS file
* tag 'mvebu-fixes-4.1-2' of git://git.infradead.org/linux-mvebu:
MAINTAINERS: Add dts entries for some of the Marvell SoCs
ARM: dove: Add clock-names to CuBox Si5351 clk generator
ARM: mvebu: Fix the main PLL frequency on Armada 375, 38x and 39x SoCs
Since many releases, the modifications of the mvebu and berlin device
tree files are merged through the mvebu subsystem. This patch makes it
official in order to help the contributors using the get_maintainer.pl
to find the accurate peoples.
In the same time, updated the mvebu description which now includes the
kirkwood SoCs and new Armada SoCs.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Andrew Lunn <andrew@lunn.ch>
The following NOP in a hot function caught my attention:
> 5a: 66 0f 1f 44 00 00 nopw 0x0(%rax,%rax,1)
That's a dead NOP that bloats the function a bit, added for the
default 16-byte alignment that GCC applies for jump targets.
I realize that x86 CPU manufacturers recommend 16-byte jump
target alignments (it's in the Intel optimization manual),
to help their relatively narrow decoder prefetch alignment
and uop cache constraints, but the cost of that is very
significant:
text data bss dec filename
12566391 1617840 1089536 15273767 vmlinux.align.16-byte
12224951 1617840 1089536 14932327 vmlinux.align.1-byte
By using 1-byte jump target alignment (i.e. no alignment at all)
we get an almost 3% reduction in kernel size (!) - and a
probably similar reduction in I$ footprint.
Now, the usual justification for jump target alignment is the
following:
- modern decoders tend to have 16-byte (effective) decoder
prefetch windows. (AMD documents it higher but measurements
suggest the effective prefetch window on curretn uarchs is
still around 16 bytes)
- on Intel there's also the uop-cache with cachelines that have
16-byte granularity and limited associativity.
- older x86 uarchs had a penalty for decoder fetches that crossed
16-byte boundaries. These limits are mostly gone from recent
uarchs.
So if a forward jump target is aligned to cacheline boundary then
prefetches will start from a new prefetch-cacheline and there's
higher chance for decoding in fewer steps and packing tightly.
But I think that argument is flawed for typical optimized kernel
code flows: forward jumps often go to 'cold' (uncommon) pieces
of code, and aligning cold code to cache lines does not bring a
lot of advantages (they are uncommon), while it causes
collateral damage:
- their alignment 'spreads out' the cache footprint, it shifts
followup hot code further out
- plus it slows down even 'cold' code that immediately follows 'hot'
code (like in the above case), which could have benefited from the
partial cacheline that comes off the end of hot code.
But even in the cache-hot case the 16 byte alignment brings
disadvantages:
- it spreads out the cache footprint, possibly making the code
fall out of the L1 I$.
- On Intel CPUs, recent microarchitectures have plenty of
uop cache (typically doubling every 3 years) - while the
size of the L1 cache grows much less aggressively. So
workloads are rarely uop cache limited.
The only situation where alignment might matter are tight
loops that could fit into a single 16 byte chunk - but those
are pretty rare in the kernel: if they exist they tend
to be pointer chasing or generic memory ops, which both tend
to be cache miss (or cache allocation) intensive and are not
decoder bandwidth limited.
So the balance of arguments strongly favors packing kernel
instructions tightly versus maximizing for decoder bandwidth:
this patch changes the jump target alignment from 16 bytes
to 1 byte (tightly packed, unaligned).
Acked-by: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jason Low <jason.low2@hp.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Link: http://lkml.kernel.org/r/20150410120846.GA17101@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
fix one gpu hang on resume.
* tag 'drm-intel-fixes-2015-05-13' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Avoid GPU hang when coming out of s3 or s4
radeon minor fixes, and pci id addition.
* 'drm-fixes-4.1' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: don't do mst probing if MST isn't enabled.
drm/radeon: add new bonaire pci id
drm/radeon: fix VM_CONTEXT*_PAGE_TABLE_END_ADDR handling
The xfstests test suite assumes that an attempt to collapse range on
the range (0, 1) will return EOPNOTSUPP if the file system does not
support collapse range. Commit 280227a75b: "ext4: move check under
lock scope to close a race" broke this, and this caused xfstests to
fail when run when testing file systems that did not have the extents
feature enabled.
Reported-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Pull ACPI fixes from Rafael Wysocki:
"Two fixes here, one revert of a recent ACPICA commit that broke audio
support on one Dell machine and a fix for a long-standing issue that
may cause systems to break randomly during boot.
Specifics:
- The recent ACPICA commit that set the ACPI _REV return value to 2
(which is the value always used by Windows and now mandated by the
spec too) in order to prevent the firmware people from using it to
play tricks with us caused a serious audio regression to happen on
Dell XPS 13 (the AML on that machine uses the _REV return value to
decide how to expose audio to the OS and does that to hide the lack
of proper support for its I2S audio in Linux), so revert that
commit for now and we'll revisit the issue in the next cycle.
- Ensure that the ordering of acpi_reserve_resources() with respect
to the rest of the ACPI initialization sequence will always be the
same, or the IO or memory region occupied by the ACPI fixed
registers may be assigned to a PCI host bridge as a result of a
race and random breakage ensues going forward"
* tag 'pm+acpi-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPICA: Permanently set _REV to the value '2'."
ACPI / init: Fix the ordering of acpi_reserve_resources()
Pull dmi fixes from Jean Delvare.
* 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
firmware: dmi_scan: Fix ordering of product_uuid
firmware: dmi_scan: Simplified displayed version
NUMA balancing is meant to be disabled by default on UMA machines but
the check is using nr_node_ids (highest node) instead of
num_online_nodes (online nodes).
The consequences are that a UMA machine with a node ID of 1 or higher
will enable NUMA balancing. This will incur useless overhead due to
minor faults with the impact depending on the workload. These are the
impact on the stats when running a kernel build on a single node machine
whose node ID happened to be 1:
vanilla patched
NUMA base PTE updates 5113158 0
NUMA huge PMD updates 643 0
NUMA page range updates 5442374 0
NUMA hint faults 2109622 0
NUMA hint local faults 2109622 0
NUMA hint local percent 100 100
NUMA pages migrated 0 0
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: <stable@vger.kernel.org> [3.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I had an issue:
Unable to handle kernel NULL pointer dereference at virtual address 0000082a
pgd = cc970000
[0000082a] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP ARM
PC is at get_pageblock_flags_group+0x5c/0xb0
LR is at unset_migratetype_isolate+0x148/0x1b0
pc : [<c00cc9a0>] lr : [<c0109874>] psr: 80000093
sp : c7029d00 ip : 00000105 fp : c7029d1c
r10: 00000001 r9 : 0000000a r8 : 00000004
r7 : 60000013 r6 : 000000a4 r5 : c0a357e4 r4 : 00000000
r3 : 00000826 r2 : 00000002 r1 : 00000000 r0 : 0000003f
Flags: Nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user
Control: 10c5387d Table: 2cb7006a DAC: 00000015
Backtrace:
get_pageblock_flags_group+0x0/0xb0
unset_migratetype_isolate+0x0/0x1b0
undo_isolate_page_range+0x0/0xdc
__alloc_contig_range+0x0/0x34c
alloc_contig_range+0x0/0x18
This issue is because when calling unset_migratetype_isolate() to unset
a part of CMA memory, it try to access the buddy page to get its status:
if (order >= pageblock_order) {
page_idx = page_to_pfn(page) & ((1 << MAX_ORDER) - 1);
buddy_idx = __find_buddy_index(page_idx, order);
buddy = page + (buddy_idx - page_idx);
if (!is_migrate_isolate_page(buddy)) {
But the begin addr of this part of CMA memory is very close to a part of
memory that is reserved at boot time (not in buddy system). So add a
check before accessing it.
[akpm@linux-foundation.org: use conventional code layout]
Signed-off-by: Hui Zhu <zhuhui@xiaomi.com>
Suggested-by: Laura Abbott <labbott@redhat.com>
Suggested-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds
James Hogan
Ezequiel Garcia
Arnd Bergmann
Gregory CLEMENT
Ingo Molnar
Dave Airlie
Theodore Ts'o
Mel Gorman
Jingoo Han
Hui Zhu