Commit Graph

2394 Commits

Author SHA1 Message Date
Linus Torvalds 8b70f71617 Merge tag 'rtc-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
 "RTC for 4.9

  Subsystem:
   - delete owner assignment in multiple drivers
   - constify rtc_class_ops structures

  Drivers:
   - ac100: support clock-output-names
   - cmos: properly handle ACPI alarms and quirky BIOSes and other fixes
   - ds1307: fix century bit support while staying comaptible with
     previous behaviour by default
   - ds1347: switch to regmap
   - isl12057 is now handled by ds1307
   - omap: support external wakeup
   - rv8803: allow to disable voltage drop detection"

* tag 'rtc-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (25 commits)
  rtc: rv8803: set VDETOFF and SWOFF via device tree
  dt/bindings: Add bindings for Micro Crystal rv8803
  devicetree: Add Micro Crystal AG vendor id
  rtc: cmos: avoid unused function warning
  rtc: ac100: Add NULL checking for devm_kzalloc call
  rtc: ds1347: changed raw spi calls to register map calls
  rtc: cmos: Restore alarm after resume
  rtc: cmos: Clear ACPI-driven alarms upon resume
  rtc: omap: Support ext_wakeup configuration
  rtc: cmos: Initialize hpet timer before irq is registered
  rtc: asm9260: rework locking
  rtc: asm9260: allow COMPILE_TEST
  rtc: constify rtc_class_ops structures
  rtc: ac100: support clock-output-names in device tree binding
  rtc: rx6110: remove owner assignment
  rtc: pic32: Delete owner assignment
  rtc: bq32k: Fix handling of oscillator failure flag
  rtc: bq32k: Use correct mask name for 'minutes' register.
  rtc: sysfs: fix a cast removing the const attribute
  Documentation: dt: Intersil isl12057 is not a trivial device
  ...
2016-10-14 13:13:44 -07:00
Oleksij Rempel 1cd713762e rtc: rv8803: set VDETOFF and SWOFF via device tree
There might be designs where the power supply circuit is designed
in a way that VDETOFF and SWOFF is required to be set. Otherwise the
RTC detects a power loss. Add a device tree interface for this.

Signed-off-by: Carsten Resch <Carsten.Resch@de.bosch.com>
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Oleksij Rempel <fixed-term.Oleksij.Rempel@de.bosch.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-10-12 13:24:39 +02:00
Lee Jones b304746c2a Merge branches 'ib-mfd-gpio-4.9', 'ib-mfd-gpio-regulator-4.9', 'ib-mfd-input-4.9', 'ib-mfd-regulator-4.9', 'ib-mfd-regulator-4.9.1', 'ib-mfd-regulator-rtc-4.9', 'ib-mfd-regulator-rtc-4.9-1' and 'ib-mfd-rtc-4.9' into ibs-for-mfd-merged 2016-10-04 15:47:01 +01:00
Arnd Bergmann 00f7f90c51 rtc: cmos: avoid unused function warning
A bug fix for the ACPI side of this driver caused a harmless
build warning:

drivers/rtc/rtc-cmos.c:1115:13: error: 'cmos_check_acpi_rtc_status' defined but not used [-Werror=unused-function]
 static void cmos_check_acpi_rtc_status(struct device *dev,

We can avoid the warning and simplify the driver at the same time
by removing the #ifdef for CONFIG_PM and rely on the SIMPLE_DEV_PM_OPS()
to set everything up correctly. cmos_resume() has to get marked
as __maybe_unused so we don't introduce another warning, and
the two variants of cmos_poweroff() can get merged into one using
an IS_ENABLED() check.

Fixes: 983bf1256e ("rtc: cmos: Clear ACPI-driven alarms upon resume")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-09-22 14:23:29 +02:00
Axel Lin 473195f80f rtc: ac100: Add NULL checking for devm_kzalloc call
devm_kzalloc can return NULL, add NULL checking to prevent NULL pointer
dereference.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-09-22 00:14:41 +02:00
Raghavendra Ganiga ee85bb5bbe rtc: ds1347: changed raw spi calls to register map calls
This patch changes calls of spi read write calls to register map
read and write calls in rtc ds1347

Signed-off-by: Raghavendra Chandra Ganiga <ravi23ganiga@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-09-22 00:14:40 +02:00
Gabriele Mazzotta 68669d55f7 rtc: cmos: Restore alarm after resume
Some platform firmware may interfere with the RTC alarm over suspend,
resulting in the kernel and hardware having different ideas about system
state but also potentially causing problems with firmware that assumes the
OS will clean this case up.  This patch restores the RTC alarm on resume
to ensure that kernel and hardware are in sync.

The case we've seen is Intel Rapid Start, which is a firmware-mediated
feature that automatically transitions systems from suspend-to-RAM to
suspend-to-disk without OS involvement.  It does this by setting the RTC
alarm and a flag that indicates that on wake it should perform the
transition rather than re-starting the OS.  However, if the OS has set a
wakeup alarm that would wake the machine earlier, it refuses to overwrite
it and allows the system to wake instead.

This fails in the following situation:

1) User configures Intel Rapid Start to transition after (say) 15
minutes
2) User suspends to RAM. Firmware sets the wakeup alarm for 15 minutes
in the future
3) User resumes after 5 minutes. Firmware does not reset the alarm, and
as such it is still set for 10 minutes in the future
4) User suspends after 5 minutes. Firmware notices that the alarm is set
for 5 minutes in the future, which is less than the 15 minute transition
threshold. It therefore assumes that the user wants the machine to wake
in 5 minutes
5) System resumes after 5 minutes

The worst case scenario here is that the user may have put the system in a
bag between (4) and (5), resulting in it running in a confined space and
potentially overheating.  This seems reasonably important.  The Rapid
Start support code got added in 3.11, but it can be configured in the
firmware regardless of kernel support.

Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-09-21 22:09:00 +02:00
Gabriele Mazzotta 983bf1256e rtc: cmos: Clear ACPI-driven alarms upon resume
Currently ACPI-driven alarms are not cleared when they wake the
system. As consequence, expired alarms must be manually cleared to
program a new alarm. Fix this by correctly handling ACPI-driven
alarms.

More specifically, the ACPI specification [1] provides for two
alternative implementations of the RTC. Depending on the
implementation, the driver either clear the alarm from the resume
callback or from ACPI interrupt handler:

 - The platform has the RTC wakeup status fixed in hardware
   (ACPI_FADT_FIXED_RTC is 0). In this case the driver can determine
   if the RTC was the reason of the wakeup from the resume callback
   by reading the RTC status register.

 - The platform has no fixed hardware feature event bits. In this
   case a GPE is used to wake the system and the driver clears the
   alarm from its handler.

[1] http://www.acpi.info/DOWNLOADS/ACPI_5_Errata%20A.pdf

Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-09-21 22:08:42 +02:00
Marcin Niestroj 97ea1906b3 rtc: omap: Support ext_wakeup configuration
Support configuration of ext_wakeup sources. This patch makes it
possible to enable ext_wakeup and set it's polarity, depending on board
configuration. AM335x's dedicated PMIC (tps65217) uses ext_wakeup to
notify about power-button presses. Handling power-button presses enables
to recover from RTC-only power states correctly.

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-09-21 21:46:04 +02:00
Pratyush Anand 970fc7f4af rtc: cmos: Initialize hpet timer before irq is registered
We have observed on few x86 machines with rtc-cmos device that
hpet_rtc_interrupt() is called just after irq registration and before
cmos_do_probe() could call hpet_rtc_timer_init().

So, neither hpet_default_delta nor hpet_t1_cmp is initialized by the time
interrupt is raised in the given situation, and this results in NMI
watchdog LOCKUP.

It has only been observed sporadically on kdump secondary kernels.

See the call trace:
---<-snip->---
[   27.913194] Kernel panic - not syncing: Watchdog detected hard LOCKUP on cpu 0
[   27.915371] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.0-342.el7.x86_64 #1
[   27.917503] Hardware name: HP ProLiant DL160 Gen8, BIOS J03 02/10/2014
[   27.919455]  ffffffff8186a728 0000000059c82488 ffff880034e05af0 ffffffff81637bd4
[   27.921870]  ffff880034e05b70 ffffffff8163144a 0000000000000010 ffff880034e05b80
[   27.924257]  ffff880034e05b20 0000000059c82488 0000000000000000 0000000000000000
[   27.926599] Call Trace:
[   27.927352]  <NMI>  [<ffffffff81637bd4>] dump_stack+0x19/0x1b
[   27.929080]  [<ffffffff8163144a>] panic+0xd8/0x1e7
[   27.930588]  [<ffffffff8111d3e0>] ? restart_watchdog_hrtimer+0x50/0x50
[   27.932502]  [<ffffffff8111d4a2>] watchdog_overflow_callback+0xc2/0xd0
[   27.934427]  [<ffffffff811612c1>] __perf_event_overflow+0xa1/0x250
[   27.936232]  [<ffffffff81161d94>] perf_event_overflow+0x14/0x20
[   27.937957]  [<ffffffff81032ae8>] intel_pmu_handle_irq+0x1e8/0x470
[   27.939799]  [<ffffffff8164164b>] perf_event_nmi_handler+0x2b/0x50
[   27.941649]  [<ffffffff81640d99>] nmi_handle.isra.0+0x69/0xb0
[   27.943348]  [<ffffffff81640f49>] do_nmi+0x169/0x340
[   27.944802]  [<ffffffff816401d3>] end_repeat_nmi+0x1e/0x2e
[   27.946424]  [<ffffffff81056ee5>] ? hpet_rtc_interrupt+0x85/0x380
[   27.948197]  [<ffffffff81056ee5>] ? hpet_rtc_interrupt+0x85/0x380
[   27.949992]  [<ffffffff81056ee5>] ? hpet_rtc_interrupt+0x85/0x380
[   27.951816]  <<EOE>>  <IRQ>  [<ffffffff8108f5a3>] ? run_timer_softirq+0x43/0x340
[   27.954114]  [<ffffffff8111e24e>] handle_irq_event_percpu+0x3e/0x1e0
[   27.955962]  [<ffffffff8111e42d>] handle_irq_event+0x3d/0x60
[   27.957635]  [<ffffffff811210c7>] handle_edge_irq+0x77/0x130
[   27.959332]  [<ffffffff8101704f>] handle_irq+0xbf/0x150
[   27.960949]  [<ffffffff8164a86f>] do_IRQ+0x4f/0xf0
[   27.962434]  [<ffffffff8163faed>] common_interrupt+0x6d/0x6d
[   27.964101]  <EOI>  [<ffffffff8163f43b>] ? _raw_spin_unlock_irqrestore+0x1b/0x40
[   27.966308]  [<fffff8111ff07>] __setup_irq+0x2a7/0x570
[   28.067859]  [<ffffffff81056e60>] ? hpet_cpuhp_notify+0x140/0x140
[   28.069709]  [<ffffffff8112032c>] request_threaded_irq+0xcc/0x170
[   28.071585]  [<ffffffff814b24a6>] cmos_do_probe+0x1e6/0x450
[   28.073240]  [<ffffffff814b2710>] ? cmos_do_probe+0x450/0x450
[   28.074911]  [<ffffffff814b27cb>] cmos_pnp_probe+0xbb/0xc0
[   28.076533]  [<ffffffff8139b245>] pnp_device_probe+0x65/0xd0
[   28.078198]  [<ffffffff813f8ca7>] driver_probe_device+0x87/0x390
[   28.079971]  [<ffffffff813f9083>] __driver_attach+0x93/0xa0
[   28.081660]  [<ffffffff813f8ff0>] ? __device_attach+0x40/0x40
[   28.083662]  [<ffffffff813f6a13>] bus_for_each_dev+0x73/0xc0
[   28.085370]  [<ffffffff813f86fe>] driver_attach+0x1e/0x20
[   28.086974]  [<ffffffff813f8250>] bus_add_driver+0x200/0x2d0
[   28.088634]  [<ffffffff81ade49a>] ? rtc_sysfs_init+0xe/0xe
[   28.090349]  [<ffffffff813f9704>] driver_register+0x64/0xf0
[   28.091989]  [<ffffffff8139b070>] pnp_register_driver+0x20/0x30
[   28.093707]  [<ffffffff81ade4ab>] cmos_init+0x11/0x71
---<-snip->---

This patch moves hpet_rtc_timer_init() before IRQ registration, so that we
can gracefully handle such spurious interrupts. It also masks HPET RTC
interrupts, in case IRQ registration fails.

We were able to reproduce the problem in maximum 15 trials of kdump
secondary kernel boot on an hp-dl160gen8 FCoE host machine without this
patch.  However, more than 35 trials went fine after applying this patch.

Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Pratyush Anand <panand@redhat.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-09-20 00:22:00 +02:00
Alexandre Belloni de75ccdd41 rtc: asm9260: rework locking
The rtc-asm9260 driver uses a discrete spinlock (wrongly uninitialized).
Use the rtc mutex to lock mmio accesses instead.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-09-05 17:15:59 +02:00
Alexandre Belloni 7f742e8e8a rtc: asm9260: allow COMPILE_TEST
The rtc-asm9260 driver compiles correctly on other architectures, add
COMPILE_TEST to improve code coverage.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-09-05 17:15:50 +02:00
Julia Lawall 34c7b3ac4c rtc: constify rtc_class_ops structures
Check for rtc_class_ops structures that are only passed to
devm_rtc_device_register, rtc_device_register,
platform_device_register_data, all of which declare the corresponding
parameter as const.  Declare rtc_class_ops structures that have these
properties as const.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct rtc_class_ops i@p = { ... };

@ok@
identifier r.i;
expression e1,e2,e3,e4;
position p;
@@
(
devm_rtc_device_register(e1,e2,&i@p,e3)
|
rtc_device_register(e1,e2,&i@p,e3)
|
platform_device_register_data(e1,e2,e3,&i@p,e4)
)

@bad@
position p != {r.p,ok.p};
identifier r.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
 struct rtc_class_ops i = { ... };
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-09-02 01:24:06 +02:00
Chen-Yu Tsai 637cac7c13 rtc: ac100: support clock-output-names in device tree binding
The ac100 device tree binding specifies the usage of clock-output-names
to specify the names of its 3 clock outputs. This is needed for orphan
clock resolution, when the ac100 is probed much later than any clocks
that consume any of its outputs. This wasn't supported by the driver.

Add support for this.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-08-31 18:23:50 +02:00
Alexandre Belloni 1bc40cb1cc rtc: rx6110: remove owner assignment
.owner is already set by the spi core.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-08-31 18:21:35 +02:00
Markus Elfring e545b984f0 rtc: pic32: Delete owner assignment
The field "owner" is set by core. Thus delete an extra initialisation.

Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-08-31 18:21:35 +02:00
Jan Östlund 421a5ba24b rtc: bq32k: Fix handling of oscillator failure flag
While the oscillator failure flag is set, the RTC registers
should be considered invalid. bq32k_rtc_read_time() now
returns an error instead of an invalid time.

The failure flag is cleared the next time the clock is set.

Signed-off-by: Jan Östlund <jao@hms.se>
Signed-off-by: Daniel Romell <daro@hms.se>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-08-31 18:21:35 +02:00
Jan Östlund 6ed1a51e0b rtc: bq32k: Use correct mask name for 'minutes' register.
The BQ32K_SECONDS_MASK and BQ32K_MINUTES_MASK both has the same
value. This is no functional change.

Signed-off-by: Jan Östlund <jao@hms.se>
Signed-off-by: Daniel Romell <daro@hms.se>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-08-31 18:21:35 +02:00
LABBE Corentin 84281c2d72 rtc: sysfs: fix a cast removing the const attribute
The char pointer buf_ptr is assigned an address from a const char
pointer buf (parameter of wakealarm_store).
The data pointer by buf_ptr is never modified.
So casting it to a (char *) is useless.

This patch remove this cast, and transform buf_ptr to a const char pointer.

Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-08-31 18:21:35 +02:00
Alexandre Belloni e8aa7dcbf0 rtc: isl12057: remove driver
The Intersil isl12057 is now supported by the ds1307 driver.

Acked-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-08-31 18:21:34 +02:00
Alexandre Belloni 78aaa06d79 rtc: ds1307: add Intersil ISL12057 support
Intersil ISL12057 is a drop-in replacement for DS1337. It can be supported
by the ds1307 driver.

Acked-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-08-31 18:21:34 +02:00
Alexandre Belloni 50d6c0ea81 rtc: ds1307: fix century bit support
Add an option to properly support the century bit of ds1337 and compatibles
and ds1340.
Because the driver had a bug until now, it is not possible to switch users
to the fixed code directly as RTCs in the field will wrongly have the
century bit set.

Acked-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-08-31 18:21:34 +02:00
Christophe JAILLET 83ab7dad06 rtc: pcf2123: Add missing error code assignment before test
It is likely that checking the result of 'pcf2123_write_reg' is expected
here.
Also fix a small style issue. The '{' at the beginning of the function
is misplaced.

Fixes: 809b453b76 ("rtc: pcf2123: clean up writes to the rtc chip")

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-08-31 18:21:34 +02:00
Wadim Egorov 5d2fd5c79e rtc: Kconfig: Name RK818 in Kconfig for RTC_DRV_RK808
The RK808 and RK818 PMICs are using a similar register map.
We can reuse the rtc driver for the RK818 PMIC. So let's add
the RK818 in the Kconfig description.

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-08-31 13:48:57 +01:00
Neil Armstrong 08655bca27 rtc: rtc-pm8xxx: Add support for pm8018 rtc
In order to support RTC on Qualcomm MDM9615 SoC, add support for
the pm8018 rtc in rtc-pm8xxx driver.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-08-31 09:33:33 +01:00