The functions: "acpi_processor_*" sound like they depend on CONFIG_ACPI_PROCESSOR
but in reality they are exposed when CONFIG_CPU_FREQ=[y|m]. As such
update the Kconfig to have this dependency and fix compile issues:
ERROR: "acpi_processor_unregister_performance" [drivers/xen/xen-acpi-processor.ko] undefined!
ERROR: "acpi_processor_notify_smm" [drivers/xen/xen-acpi-processor.ko] undefined!
ERROR: "acpi_processor_register_performance" [drivers/xen/xen-acpi-processor.ko] undefined!
ERROR: "acpi_processor_preregister_performance" [drivers/xen/xen-acpi-processor.ko] undefined!
Note: We still need the CONFIG_ACPI
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
With patch "xen/cpufreq: Disable the cpu frequency scaling drivers
from loading." we do not have to worry about said drivers loading
themselves before the xen-acpi-processor driver. Hence we can remove
the default selection (=y if CPU frequency drivers were built-in, or
=m if CPU frequency drivers were built as modules), and just
select =m for the default case.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
This driver solves three problems:
1). Parse and upload ACPI0007 (or PROCESSOR_TYPE) information to the
hypervisor - aka P-states (cpufreq data).
2). Upload the the Cx state information (cpuidle data).
3). Inhibit CPU frequency scaling drivers from loading.
The reason for wanting to solve 1) and 2) is such that the Xen hypervisor
is the only one that knows the CPU usage of different guests and can
make the proper decision of when to put CPUs and packages in proper states.
Unfortunately the hypervisor has no support to parse ACPI DSDT tables, hence it
needs help from the initial domain to provide this information. The reason
for 3) is that we do not want the initial domain to change P-states while the
hypervisor is doing it as well - it causes rather some funny cases of P-states
transitions.
For this to work, the driver parses the Power Management data and uploads said
information to the Xen hypervisor. It also calls acpi_processor_notify_smm()
to inhibit the other CPU frequency scaling drivers from being loaded.
Everything revolves around the 'struct acpi_processor' structure which
gets updated during the bootup cycle in different stages. At the startup, when
the ACPI parser starts, the C-state information is processed (processor_idle)
and saved in said structure as 'power' element. Later on, the CPU frequency
scaling driver (powernow-k8 or acpi_cpufreq), would call the the
acpi_processor_* (processor_perflib functions) to parse P-states information
and populate in the said structure the 'performance' element.
Since we do not want the CPU frequency scaling drivers from loading
we have to call the acpi_processor_* functions to parse the P-states and
call "acpi_processor_notify_smm" to stop them from loading.
There is also one oddity in this driver which is that under Xen, the
physical online CPU count can be different from the virtual online CPU count.
Meaning that the macros 'for_[online|possible]_cpu' would process only
up to virtual online CPU count. We on the other hand want to process
the full amount of physical CPUs. For that, the driver checks if the ACPI IDs
count is different from the APIC ID count - which can happen if the user
choose to use dom0_max_vcpu argument. In such a case a backup of the PM
structure is used and uploaded to the hypervisor.
[v1-v2: Initial RFC implementations that were posted]
[v3: Changed the name to passthru suggested by Pasi Kärkkäinen <pasik@iki.fi>]
[v4: Added vCPU != pCPU support - aka dom0_max_vcpus support]
[v5: Cleaned up the driver, fix bug under Athlon XP]
[v6: Changed the driver to a CPU frequency governor]
[v7: Jan Beulich <jbeulich@suse.com> suggestion to make it a cpufreq scaling driver
made me rework it as driver that inhibits cpufreq scaling driver]
[v8: Per Jan's review comments, fixed up the driver]
[v9: Allow to continue even if acpi_processor_preregister_perf.. fails]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Access to arbitrary hypercalls is currently provided via xenfs. This
adds a standard character device to handle this. The support in xenfs
remains for backward compatibility and uses the device driver code.
Signed-off-by: Bastian Blank <waldi@debian.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Xen PVHVM needs xen-platform-pci, on the other hand xen-platform-pci is
useless in any other cases.
Therefore remove the XEN_PLATFORM_PCI config option and compile
xen-platform-pci built-in if XEN_PVHVM is selected.
Changes to v1:
- remove xen-platform-pci.o and just use platform-pci.o since it is not
externally visible anymore.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Without enabling CONFIG_XEN_TMEM we get this:
drivers/xen/xen-selfballoon.c:461: undefined reference to `tmem_enabled'
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Memory hotplug support for Xen balloon driver. It should be mentioned
that hotplugged memory is not onlined automatically. It should be onlined
by user through standard sysfs interface.
Memory could be hotplugged in following steps:
1) dom0: xl mem-max <domU> <maxmem>
where <maxmem> is >= requested memory size,
2) dom0: xl mem-set <domU> <memory>
where <memory> is requested memory size; alternatively memory
could be added by writing proper value to
/sys/devices/system/xen_memory/xen_memory0/target or
/sys/devices/system/xen_memory/xen_memory0/target_kb on dumU,
3) domU: for i in /sys/devices/system/memory/memory*/state; do \
[ "`cat "$i"`" = offline ] && echo online > "$i"; done
Memory could be onlined automatically on domU by adding following line to
udev rules:
SUBSYSTEM=="memory", ACTION=="add", RUN+="/bin/sh -c '[ -f /sys$devpath/state ] && echo online > /sys$devpath/state'"
In that case step 3 should be omitted.
Signed-off-by: Daniel Kiper <dkiper@net-space.pl>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* stable/xen-pciback-0.6.3:
xen/pciback: Have 'passthrough' option instead of XEN_PCIDEV_BACKEND_PASS and XEN_PCIDEV_BACKEND_VPCI
xen/pciback: Remove the DEBUG option.
xen/pciback: Drop two backends, squash and cleanup some code.
xen/pciback: Print out the MSI/MSI-X (PIRQ) values
xen/pciback: Don't setup an fake IRQ handler for SR-IOV devices.
xen: rename pciback module to xen-pciback.
xen/pciback: Fine-grain the spinlocks and fix BUG: scheduling while atomic cases.
xen/pciback: Allocate IRQ handler for device that is shared with guest.
xen/pciback: Disable MSI/MSI-X when reseting a device
xen/pciback: guest SR-IOV support for PV guest
xen/pciback: Register the owner (domain) of the PCI device.
xen/pciback: Cleanup the driver based on checkpatch warnings and errors.
xen/pciback: xen pci backend driver.
Conflicts:
drivers/xen/Kconfig
.. compile options. This way the user can decide during runtime whether they
want the default 'vpci' (virtual pci passthrough) or where the PCI devices
are passed in without any BDF renumbering. The option 'passthrough' allows
the user to toggle the it from 0 (vpci) to 1 (passthrough).
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
The latter is easily fixed - by the developer compiling the
module with -DDEBUG. And during runtime - the loglvl provides
quite a lot of useful data.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
This is the host side counterpart to the frontend driver in
drivers/pci/xen-pcifront.c. The PV protocol is also implemented by
frontend drivers in other OSes too, such as the BSDs.
The PV protocol is rather simple. There is page shared with the guest,
which has the 'struct xen_pci_sharedinfo' embossed in it. The backend
has a thread that is kicked every-time the structure is changed and
based on the operation field it performs specific tasks:
XEN_PCI_OP_conf_[read|write]:
Read/Write 0xCF8/0xCFC filtered data. (conf_space*.c)
Based on which field is probed, we either enable/disable the PCI
device, change power state, read VPD, etc. The major goal of this
call is to provide a Physical IRQ (PIRQ) to the guest.
The PIRQ is Xen hypervisor global IRQ value irrespective of the IRQ
is tied in to the IO-APIC, or is a vector. For GSI type
interrupts, the PIRQ==GSI holds. For MSI/MSI-X the
PIRQ value != Linux IRQ number (thought PIRQ==vector).
Please note, that with Xen, all interrupts (except those level shared ones)
are injected directly to the guest - there is no host interaction.
XEN_PCI_OP_[enable|disable]_msi[|x] (pciback_ops.c)
Enables/disables the MSI/MSI-X capability of the device. These operations
setup the MSI/MSI-X vectors for the guest and pass them to the frontend.
When the device is activated, the interrupts are directly injected in the
guest without involving the host.
XEN_PCI_OP_aer_[detected|resume|mmio|slotreset]: In case of failure,
perform the appropriate AER commands on the guest. Right now that is
a cop-out - we just kill the guest.
Besides implementing those commands, it can also
- hide a PCI device from the host. When booting up, the user can specify
xen-pciback.hide=(1:0:0)(BDF..) so that host does not try to use the
device.
The driver was lifted from linux-2.6.18.hg tree and fixed up
so that it could compile under v3.0. Per suggestion from Jesse Barnes
moved the driver to drivers/xen/xen-pciback.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
This patch introduces two in-kernel drivers for Xen transcendent memory
("tmem") functionality that complement cleancache and frontswap. Both
use control theory to dynamically adjust and optimize memory utilization.
Selfballooning controls the in-kernel Xen balloon driver, targeting a goal
value (vm_committed_as), thus pushing less frequently used clean
page cache pages (through the cleancache code) into Xen tmem where
Xen can balance needs across all VMs residing on the physical machine.
Frontswap-selfshrinking controls the number of pages in frontswap,
driving it towards zero (effectively doing a partial swapoff) when
in-kernel memory pressure subsides, freeing up RAM for other VMs.
More detail is provided in the header comment of xen-selfballooning.c.
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
[v8: konrad.wilk@oracle.com: set default enablement depending on frontswap]
[v7: konrad.wilk@oracle.com: fix capitalization and punctuation in comments]
[v6: fix frontswap-selfshrinking initialization]
[v6: konrad.wilk@oracle.com: fix init pr_infos; add comments about swap]
[v5: konrad.wilk@oracle.com: add NULL to attr list; move inits up to decls]
[v4: dkiper@net-space.pl: use strict_strtoul plus a few syntactic nits]
[v3: konrad.wilk@oracle.com: fix potential divides-by-zero]
[v3: konrad.wilk@oracle.com: add many more comments, fix nits]
[v2: rebased to linux-3.0-rc1]
[v2: Ian.Campbell@citrix.com: reorganize as new file (xen-selfballoon.c)]
[v2: dkiper@net-space.pl: proper access to vm_committed_as]
[v2: dkiper@net-space.pl: accounting fixes]
Cc: Jan Beulich <JBeulich@novell.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: <xen-devel@lists.xensource.com>
Provide the shim code for frontswap for Xen tmem even if the
frontswap patchset is not present yet. (The egg is before
the chicken.)
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Reviewed-by: Konrad Wilk <konrad.wilk@oracle.com>
When CONFIG_XEN is enabled the gntdev and gntalloc driver will be
compiled as a module by default.
[v2: Added the fix for the gntalloc driver as well]
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
This allows a userspace application to allocate a shared page for
implementing inter-domain communication or device drivers. These
shared pages can be mapped using the gntdev device or by the kernel
in another domain.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* 'stable/gntdev' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/p2m: Fix module linking error.
xen p2m: clear the old pte when adding a page to m2p_override
xen gntdev: use gnttab_map_refs and gnttab_unmap_refs
xen: introduce gnttab_map_refs and gnttab_unmap_refs
xen p2m: transparently change the p2m mappings in the m2p override
xen/gntdev: Fix circular locking dependency
xen/gntdev: stop using "token" argument
xen: gntdev: move use of GNTMAP_contains_pte next to the map_op
xen: add m2p override mechanism
xen: move p2m handling to separate file
xen/gntdev: add VM_PFNMAP to vma
xen/gntdev: allow usermode to map granted pages
xen: define gnttab_set_map_op/unmap_op
Fix up trivial conflict in drivers/xen/Kconfig
* 'stable/platform-pci-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen-platform: Fix compile errors if CONFIG_PCI is not enabled.
xen: rename platform-pci module to xen-platform-pci.
xen-platform: use PCI interfaces to request IO and MEM resources.
drivers/xen/platform-pci.c:127: error: implicit declaration of function
'pci_request_region'
drivers/xen/platform-pci.c:165: error: implicit declaration of function
'pci_release_region'
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Impact: build fix
Making the xenbus backend support a separate module is needlessly complex
and causes build failures.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Impact: backend device support
Add the basic machinery to support backend drivers.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
[corresponds to 79727b851bac in git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Impact: refactor
Make a distinct frontend xenbus, in preparation for adding a backend xenbus.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
[corresponds to 2fd433a4188f in git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
with adjustments to reflect changes in the code which is moved]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
We used to depend on CONFIG_SWIOTLB, but that is disabled by default.
So when compiling we get this compile error:
arch/x86/xen/pci-swiotlb-xen.c: In function 'pci_xen_swiotlb_detect':
arch/x86/xen/pci-swiotlb-xen.c:48: error: lvalue required as left operand of assignment
Fix it by actually activating the SWIOTLB library.
Reported-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Konrad Rzeszutek Wilk
Bastian Blank
Stefano Stabellini
Daniel Kiper
Dan Magenheimer
Daniel De Graaf
Linus Torvalds
Gerd Hoffmann
Jeremy Fitzhardinge
Ian Campbell