drivers/media/dvb-frontends/sp2.c:269:5: sparse: symbol 'sp2_init' was not declared. Should it be static?
drivers/media/dvb-frontends/sp2.c:351:5: sparse: symbol 'sp2_exit' was not declared. Should it be static?
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The default used to be that the first vivid device instance was
single planar, the second multi planar, the third single planar, etc.
However, that turned out to be unexpected and awkward. Change the
driver to always default to single planar.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
With kernel 3.17 the imon remote control for device 15c2:0034 does not
work anymore, which uses the OTHER protocol. Only the front panel
buttons which uses the RC6 protocol are working.
Adds the missing comparison for the RC_BIT_OTHER.
Cc: stable@vger.kernel.org # for Kernel 3.17
Signed-off-by: Ulrich Eckhardt <uli@uli-eckhardt.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Change CONFIG_PM to CONFIG_PM_SLEEP to solve
warning: 'hix5hd2_ir_suspend' & 'hix5hd2_ir_resume' defined but not used
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The Tevii S480 outputs 18V on startup for the LNB supply voltage and does not
automatically power down. This blocks other receivers connected
to a satellite channel router (EN50494), since the receivers can not send the
required DiSEqC sequences when the Tevii card is connected to a the same SCR.
This patch switches off the LNB supply voltage on initialization of the frontend.
[mchehab@osg.samsung.com: add a comment about why we're explicitly
turning off voltage at device init]
Cc: stable@vger.kernel.org
Signed-off-by: Ulrich Eckhardt <uli@uli-eckhardt.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Changeset e87b540be2 broke RC5-SZ decoding, as it forgot to add
the extra bit check for the enabled protocols at the beginning of
the logic.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
IR receiver using nuvoton-cir and lirc required additional configuration
steps after upgrade from kernel 3.16 to 3.17-rcX. Bisected regression to
commit da6e162d6a ("[media] rc-core:
simplify sysfs code").
The regression comes from adding function change_protocol in ir-raw.c.
It changes behaviour so that only the protocol enabled by driver's
map_name will be active after registration. This breaks user space
behaviour, lirc does not get key press signals anymore.
Enable lirc protocol by default for ir raw decoders to restore original
behaviour.
Cc: stable@vger.kernel.org # for v3.17
Signed-off-by: Tomas Melin <tomas.melin@iki.fi>
Acked-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
If power management is disabled these functions become unused, so there
is no reason to build them. This fixes a couple of build warnings when
PM(_SLEEP,_RUNTIME) is not enabled.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
If power management is disabled these function become unused, so there
is no reason to build them. This fixes a couple of build warnings when
PM(_SLEEP,_RUNTIME) is not enabled.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The PLAT_S5P Kconfig symbol was removed in commit d78c16ccde
("ARM: SAMSUNG: Remove remaining legacy code"). However, there
are still some references to that symbol left, fix that by
substituting them with ARCH_S5PV210.
Fixes: d78c16ccde ("ARM: SAMSUNG: Remove remaining legacy code")
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Cc: <stable@vger.kernel.org> # for 3.17
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
When user requests V4L2_MEMORY_MMAP type buffers, the videobuf-core
will assign the corresponding offset to the 'boff' field of the
videobuf_buffer for each requested buffer sequentially. Later, user
may call mmap() to map one or all of the buffers with the 'offset'
parameter which is equal to its 'boff' value. Obviously, the 'offset'
value is only used to find the matched buffer instead of to be the
real offset from the buffer's physical start address as used by
vm_iomap_memory(). So, in some case that if the offset is not zero,
vm_iomap_memory() will fail.
Signed-off-by: Fancy Fang <chen.fang@freescale.com>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
tw68 doesn't use i2c at all, so remove this bogus dependency to prevent
this warning:
warning: (CAN_PEAK_PCIEC && SFC && IGB && VIDEO_TW68 && DRM && FB_DDC && FB_VIA) selects I2C_ALGOBIT which has unmet direct dependencies (I2C)
CC [M] drivers/i2c/algos/i2c-algo-bit.o
../drivers/i2c/algos/i2c-algo-bit.c: In function 'i2c_bit_add_bus':
../drivers/i2c/algos/i2c-algo-bit.c:658:33: error: 'i2c_add_adapter' undeclared (first use in this function)
../drivers/i2c/algos/i2c-algo-bit.c:658:33: note: each undeclared identifier is reported only once for each function it appears in
../drivers/i2c/algos/i2c-algo-bit.c: In function 'i2c_bit_add_numbered_bus':
../drivers/i2c/algos/i2c-algo-bit.c:664:33: error: 'i2c_add_numbered_adapter' undeclared (first use in this function)
../drivers/i2c/algos/i2c-algo-bit.c: In function 'i2c_bit_add_bus':
../drivers/i2c/algos/i2c-algo-bit.c:659:1: warning: control reaches end of non-void function [-Wreturn-type]
../drivers/i2c/algos/i2c-algo-bit.c: In function 'i2c_bit_add_numbered_bus':
../drivers/i2c/algos/i2c-algo-bit.c:665:1: warning: control reaches end of non-void function [-Wreturn-type]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
See include/linux/interrupt.h:
"This flag is a NOOP and scheduled to be removed"
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
fmdrv_common.c: In function 'fm_download_firmware':
fmdrv_common.c:1259:2: warning: format '%d' expects argument of type 'int', but argument 3 has type 'size_t' [-Wformat=]
fmdbg("Firmware(%s) length : %d bytes\n", fw_name, fw_entry->size);
^
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
My static checker complains that "i" could be one element beyond the end
of the array.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The config structs used for DVBSky T9580 were not initialized. This patch fixes that.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Commit e93e7fd9f5 ("v4l2: uvcvideo: Allow
using larger buffers") reworked the buffer size sanity check at buffer
completion time to use the frame size instead of the allocated buffer
size. However, it introduced two bugs in doing so:
- it assigned the allocated buffer size to the frame_size field, instead
of assigning the correct frame size
- it performed the assignment in the S_FMT handler, resulting in the
frame_size field being uninitialized if the userspace application
doesn't call S_FMT.
Fix both issues by removing the frame_size field and validating the
buffer size against the UVC video control dwMaxFrameSize.
Fixes: e93e7fd9f5 ("v4l2: uvcvideo: Allow using larger buffers")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The random_line buffer must be twice the maximum width, but it only allocated
the maximum width, so it was only half the size it needed to be.
Surprisingly I never saw the kernel fail on this, but the same TPG code used in
qv4l2 crashed and valgrind helped me track this bug down.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Fengguang Wu
Akihiro Tsukada
Hans Verkuil
Ulrich Eckhardt
Zhangfei Gao
Mauro Carvalho Chehab
Tomas Melin
Jacek Anaszewski
Thierry Reding
Sylwester Nawrocki
Fancy Fang
Dan Carpenter
Fabian Frederick
Olli Salonen
Laurent Pinchart
Hans Verkuil