...it does the same thing as cifs_fill_fileinfo, but doesn't handle the
flist ordering correctly. Also rename cifs_fill_fileinfo to a more
descriptive name and have it take an open flags arg instead of just a
write_only flag. That makes the logic in the callers a little simpler.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
This is the fourth respin of the patch to convert oplock breaks to
use the slow_work facility.
A customer of ours was testing a backport of one of the earlier
patchsets, and hit a "Busy inodes after umount..." problem. An oplock
break job had raced with a umount, and the superblock got torn down and
its memory reused. When the oplock break job tried to dereference the
inode->i_sb, the kernel oopsed.
This patchset has the oplock break job hold an inode and vfsmount
reference until the oplock break completes. With this, there should be
no need to take a tcon reference (the vfsmount implicitly holds one
already).
Currently, when an oplock break comes in there's a chance that the
oplock break job won't occur if the allocation of the oplock_q_entry
fails. There are also some rather nasty races in the allocation and
handling these structs.
Rather than allocating oplock queue entries when an oplock break comes
in, add a few extra fields to the cifsFileInfo struct. Get rid of the
dedicated cifs_oplock_thread as well and queue the oplock break job to
the slow_work thread pool.
This approach also has the advantage that the oplock break jobs can
potentially run in parallel rather than be serialized like they are
today.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
It's possible that this struct will outlive the filp to which it is
attached. If it does and it needs to do some work on the inode, then
it'll need a reference.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
...rather than a write lock. It doesn't change the list so a read lock
should be sufficient.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
It's set on oplock break but nothing ever looks at it.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
cifs_posix_open takes a "poplock" argument that's intended to be used in
the actual posix open call to set the "Flags" field. It ignores this
value however and declares an "oplock" parameter on the stack that it
passes uninitialized to the CIFSPOSIXOpen function. Not only does this
mean that the oplock request flags are bogus, but the result that's
expected to be in that variable is unchanged.
Fix this, and also clean up the type of the oplock parameter used. Since
it's expected to be __u32, we should use that everywhere and not
implicitly cast it from a signed type.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
commit ac68392460 ("[CIFS] Allow raw
ntlmssp code to be enabled with sec=ntlmssp") added a new bit to the
allowed security flags mask but seems to have inadvertently removed
Lanman security from the allowed flags. Add it back.
CC: Stable <stable@kernel.org>
Signed-off-by: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
* 'osync_cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6:
fsync: wait for data writeout completion before calling ->fsync
vfs: Remove generic_osync_inode() and sync_page_range{_nolock}()
fat: Opencode sync_page_range_nolock()
pohmelfs: Use new syncing helper
xfs: Convert sync_page_range() to simple filemap_write_and_wait_range()
ocfs2: Update syncing after splicing to match generic version
ntfs: Use new syncing helpers and update comments
ext4: Remove syncing logic from ext4_file_write
ext3: Remove syncing logic from ext3_file_write
ext2: Update comment about generic_osync_inode
vfs: Introduce new helpers for syncing after writing to O_SYNC file or IS_SYNC inode
vfs: Rename generic_file_aio_write_nolock
ocfs2: Use __generic_file_aio_write instead of generic_file_aio_write_nolock
pohmelfs: Use __generic_file_aio_write instead of generic_file_aio_write_nolock
vfs: Remove syncing from generic_file_direct_write() and generic_file_buffered_write()
vfs: Export __generic_file_aio_write() and add some comments
vfs: Introduce filemap_fdatawait_range
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw:
GFS2: Whitespace fixes
GFS2: Remove unused sysfs file
GFS2: Be extra careful about deallocating inodes
GFS2: Remove no_formal_ino generating code
GFS2: Rename eattr.[ch] as xattr.[ch]
GFS2: Clean up of extended attribute support
GFS2: Add explanation of extended attr on-disk format
GFS2: Add "-o errors=panic|withdraw" mount options
GFS2: jumping to wrong label?
GFS2: free disk inode which is deleted by remote node -V2
GFS2: Add a document explaining GFS2's uevents
GFS2: Add sysfs link to device
GFS2: Replace assertion with proper error handling
GFS2: Improve error handling in inode allocation
GFS2: Add some more info to uevents
GFS2: Add online uevent to GFS2
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6:
udf: Fix possible corruption when close races with write
udf: Perform preallocation only for regular files
udf: Remove wrong assignment in udf_symlink
udf: Remove dead code
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: (21 commits)
fs/Kconfig: move nilfs2 outside misc filesystems
nilfs2: convert nilfs_bmap_lookup to an inline function
nilfs2: allow btree code to directly call dat operations
nilfs2: add update functions of virtual block address to dat
nilfs2: remove individual gfp constants for each metadata file
nilfs2: stop zero-fill of btree path just before free it
nilfs2: remove unused btree argument from btree functions
nilfs2: remove nilfs_dat_abort_start and nilfs_dat_abort_free
nilfs2: shorten freeze period due to GC in write operation v3
nilfs2: add more check routines in mount process
nilfs2: An unassigned variable is assigned to a never used structure member
nilfs2: use GFP_NOIO for bio_alloc instead of GFP_NOWAIT
nilfs2: stop using periodic write_super callback
nilfs2: clean up nilfs_write_super
nilfs2: fix disorder of nilfs_write_super in nilfs_sync_fs
nilfs2: remove redundant super block commit
nilfs2: implement nilfs_show_options to display mount options in /proc/mounts
nilfs2: always lookup disk block address before reading metadata block
nilfs2: use semaphore to protect pointer to a writable FS-instance
nilfs2: fix format string compile warning (ino_t)
...
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
cifs: consolidate reconnect logic in smb_init routines
cifs: Replace wrtPending with a real reference count
cifs: protect GlobalOplock_Q with its own spinlock
cifs: use tcon pointer in cifs_show_options
cifs: send IPv6 addr in upcall with colon delimiters
[CIFS] Fix checkpatch warnings
PATCH] cifs: fix broken mounts when a SSH tunnel is used (try #4)
[CIFS] Memory leak in ntlmv2 hash calculation
[CIFS] potential NULL dereference in parse_DFS_referrals()
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1623 commits)
netxen: update copyright
netxen: fix tx timeout recovery
netxen: fix file firmware leak
netxen: improve pci memory access
netxen: change firmware write size
tg3: Fix return ring size breakage
netxen: build fix for INET=n
cdc-phonet: autoconfigure Phonet address
Phonet: back-end for autoconfigured addresses
Phonet: fix netlink address dump error handling
ipv6: Add IFA_F_DADFAILED flag
net: Add DEVTYPE support for Ethernet based devices
mv643xx_eth.c: remove unused txq_set_wrr()
ucc_geth: Fix hangs after switching from full to half duplex
ucc_geth: Rearrange some code to avoid forward declarations
phy/marvell: Make non-aneg speed/duplex forcing work for 88E1111 PHYs
drivers/net/phy: introduce missing kfree
drivers/net/wan: introduce missing kfree
net: force bridge module(s) to be GPL
Subject: [PATCH] appletalk: Fix skb leak when ipddp interface is not loaded
...
Fixed up trivial conflicts:
- arch/x86/include/asm/socket.h
converted to <asm-generic/socket.h> in the x86 tree. The generic
header has the same new #define's, so that works out fine.
- drivers/net/tun.c
fix conflict between 89f56d1e9 ("tun: reuse struct sock fields") that
switched over to using 'tun->socket.sk' instead of the redundantly
available (and thus removed) 'tun->sk', and 2b980dbd ("lsm: Add hooks
to the TUN driver") which added a new 'tun->sk' use.
Noted in 'next' by Stephen Rothwell.
When we close a file, we remove preallocated blocks from it. But this
truncation was not protected by i_mutex and thus it could have raced with a
write through a different fd and cause crashes or even filesystem corruption.
Signed-off-by: Jan Kara <jack@suse.cz>
So far we preallocated blocks also for directories but that brings a
problem, when to get rid of preallocated blocks we don't need. So far
we removed them in udf_clear_inode() which has a disadvantage that
1) blocks are unavailable long after writing to a directory finished
and thus one can get out of space unnecessarily early
2) releasing blocks from udf_clear_inode is problematic because VFS
does not expect us to redirty inode there and it also slows down
memory reclaim.
So preallocate blocks only for regular files where we can drop preallocation
in udf_release_file.
Signed-off-by: Jan Kara <jack@suse.cz>
Recomputation of the pointer was wrong (it should have been just increment).
Luckily, we never use the computed value. Remove it.
Signed-off-by: Jan Kara <jack@suse.cz>
Currenly vfs_fsync(_range) first calls filemap_fdatawrite to write out
the data, the calls into ->fsync to write out the metadata and then finally
calls filemap_fdatawait to wait for the data I/O to complete. What sounds
like a clever micro-optimization actually is nast trap for many filesystems.
For many modern filesystems i_size or other inode information is only
updated on I/O completion and we need to wait for I/O to finish before
we can write out the metadata. For old fashionen filesystems that
instanciate blocks during the actual write and also update the metadata
at that point it opens up a large window were we could expose uninitialized
blocks after a crash. While a few filesystems that need it already wait
for the I/O to finish inside their ->fsync methods it is rather suboptimal
as it is done under the i_mutex and also always for the whole file instead
of just a part as we could do for O_SYNC handling.
Here is a small audit of all fsync instances in the tree:
- spufs_mfc_fsync:
- ps3flash_fsync:
- vol_cdev_fsync:
- printer_fsync:
- fb_deferred_io_fsync:
- bad_file_fsync:
- simple_sync_file:
don't care - filesystems/drivers do't use the page cache or are
purely in-memory.
- simple_fsync:
- file_fsync:
- affs_file_fsync:
- fat_file_fsync:
- jfs_fsync:
- ubifs_fsync:
- reiserfs_dir_fsync:
- reiserfs_sync_file:
never touch pagecache themselves. We need to wait before if we do
not want to expose stale data after an allocation.
- afs_fsync:
- fuse_fsync_common:
do the waiting writeback itself in awkward ways, would benefit from
proper semantics
- block_fsync:
Does a filemap_write_and_wait on the block device inode. Because we
now have f_mapping that is the same inode we call it on in vfs_fsync.
So just removing it and letting the VFS do the work in one go would
be an improvement.
- btrfs_sync_file:
- cifs_fsync:
- xfs_file_fsync:
need the wait first and currently do it themselves. would benefit from
doing it outside i_mutex.
- coda_fsync:
- ecryptfs_fsync:
- exofs_file_fsync:
- shm_fsync:
only passes the fsync through to the lower layer
- ext3_sync_file:
doesn't seem to care, comments are confusing.
- ext4_sync_file:
would need the wait to work correctly for delalloc mode with late
i_size updates. Otherwise the ext3 comment applies.
currently implemens it's own writeback and wait in an odd way,
could benefit from doing it properly.
- gfs2_fsync:
not needed for journaled data mode, but probably harmless there.
Currently writes back data asynchronously itself. Needs some
major audit.
- hostfs_fsync:
just calls fsync/datasync on the host FD. Without the wait before
data might not even be inflight yet if we're unlucky.
- hpfs_file_fsync:
- ncp_fsync:
no-ops. Dangerous before and after.
- jffs2_fsync:
just calls jffs2_flush_wbuf_gc, not sure how this relates to data.
- nfs_fsync_dir:
just increments stats, claims all directory operations are synchronous
- nfs_file_fsync:
only writes out data??? Looks very odd.
- nilfs_sync_file:
looks like it expects all data done, but not sure from the code
- ntfs_dir_fsync:
- ntfs_file_fsync:
appear to do their own data writeback. Very convoluted code.
- ocfs2_sync_file:
does it's own data writeback, but no wait. probably needs the wait.
- smb_fsync:
according to a comment expects all pages written already, probably needs
the wait before.
This patch only changes vfs_fsync_range, removal of the wait in the methods
that have it is left to the filesystem maintainers. Note that most
filesystems really do need an audit for their fsync methods given the
gems found in this very brief audit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
fat_cont_expand() is the only user of sync_page_range_nolock(). It's also the
only user of generic_osync_inode() which does not have a file open. So
opencode needed actions for FAT so that we can convert generic_osync_inode() to
a standard syncing path.
Update a comment about generic_osync_inode().
CC: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Jan Kara <jack@suse.cz>
Christoph Hellwig says that it is enough for XFS to call
filemap_write_and_wait_range() instead of sync_page_range() because we do
all the metadata syncing when forcing the log.
CC: Felix Blyakher <felixb@sgi.com>
CC: xfs@oss.sgi.com
CC: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Update ocfs2 specific splicing code to use generic syncing helper. The sync now
does not happen under rw_lock because generic_write_sync() acquires i_mutex
which ranks above rw_lock. That should not matter because standard fsync path
does not hold it either.
Acked-by: Joel Becker <Joel.Becker@oracle.com>
Acked-by: Mark Fasheh <mfasheh@suse.com>
CC: ocfs2-devel@oss.oracle.com
Signed-off-by: Jan Kara <jack@suse.cz>
Steve French
Jeff Layton
Chuck Ebbert
Linus Torvalds
Jan Kara
Christoph Hellwig