Pull networking updates from David Miller:
"Highlights:
1) Support SPI based w5100 devices, from Akinobu Mita.
2) Partial Segmentation Offload, from Alexander Duyck.
3) Add GMAC4 support to stmmac driver, from Alexandre TORGUE.
4) Allow cls_flower stats offload, from Amir Vadai.
5) Implement bpf blinding, from Daniel Borkmann.
6) Optimize _ASYNC_ bit twiddling on sockets, unless the socket is
actually using FASYNC these atomics are superfluous. From Eric
Dumazet.
7) Run TCP more preemptibly, also from Eric Dumazet.
8) Support LED blinking, EEPROM dumps, and rxvlan offloading in mlx5e
driver, from Gal Pressman.
9) Allow creating ppp devices via rtnetlink, from Guillaume Nault.
10) Improve BPF usage documentation, from Jesper Dangaard Brouer.
11) Support tunneling offloads in qed, from Manish Chopra.
12) aRFS offloading in mlx5e, from Maor Gottlieb.
13) Add RFS and RPS support to SCTP protocol, from Marcelo Ricardo
Leitner.
14) Add MSG_EOR support to TCP, this allows controlling packet
coalescing on application record boundaries for more accurate
socket timestamp sampling. From Martin KaFai Lau.
15) Fix alignment of 64-bit netlink attributes across the board, from
Nicolas Dichtel.
16) Per-vlan stats in bridging, from Nikolay Aleksandrov.
17) Several conversions of drivers to ethtool ksettings, from Philippe
Reynes.
18) Checksum neutral ILA in ipv6, from Tom Herbert.
19) Factorize all of the various marvell dsa drivers into one, from
Vivien Didelot
20) Add VF support to qed driver, from Yuval Mintz"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1649 commits)
Revert "phy dp83867: Fix compilation with CONFIG_OF_MDIO=m"
Revert "phy dp83867: Make rgmii parameters optional"
r8169: default to 64-bit DMA on recent PCIe chips
phy dp83867: Make rgmii parameters optional
phy dp83867: Fix compilation with CONFIG_OF_MDIO=m
bpf: arm64: remove callee-save registers use for tmp registers
asix: Fix offset calculation in asix_rx_fixup() causing slow transmissions
switchdev: pass pointer to fib_info instead of copy
net_sched: close another race condition in tcf_mirred_release()
tipc: fix nametable publication field in nl compat
drivers: net: Don't print unpopulated net_device name
qed: add support for dcbx.
ravb: Add missing free_irq() calls to ravb_close()
qed: Remove a stray tab
net: ethernet: fec-mpc52xx: use phy_ethtool_{get|set}_link_ksettings
net: ethernet: fec-mpc52xx: use phydev from struct net_device
bpf, doc: fix typo on bpf_asm descriptions
stmmac: hardware TX COE doesn't work when force_thresh_dma_mode is set
net: ethernet: fs-enet: use phy_ethtool_{get|set}_link_ksettings
net: ethernet: fs-enet: use phydev from struct net_device
...
split allows to move expensive update of 'struct trace_entry' to later phase.
Repurpose unused 1st argument of perf_tp_event() to indicate event type.
While splitting use temp variable 'rctx' instead of '*rctx' to avoid
unnecessary loads done by the compiler due to -fno-strict-aliasing
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
avoid memset in perf_fetch_caller_regs, since it's the critical path of all tracepoints.
It's called from perf_sw_event_sched, perf_event_task_sched_in and all of perf_trace_##call
with this_cpu_ptr(&__perf_regs[..]) which are zero initialized by perpcu init logic and
subsequent call to perf_arch_fetch_caller_regs initializes the same fields on all archs,
so we can safely drop memset from all of the above cases and move it into
perf_ftrace_function_call that calls it with stack allocated pt_regs.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull tracing updates from Steven Rostedt:
"Not much new with tracing for this release. Mostly just clean ups and
minor fixes.
Here's what else is new:
- A new TRACE_EVENT_FN_COND macro, combining both _FN and _COND for
those that want both.
- New selftest to test the instance create and delete
- Better debug output when ftrace fails"
* tag 'trace-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (24 commits)
ftrace: Fix the race between ftrace and insmod
ftrace: Add infrastructure for delayed enabling of module functions
x86: ftrace: Fix the comments for ftrace_modify_code_direct()
tracing: Fix comment to use tracing_on over tracing_enable
metag: ftrace: Fix the comments for ftrace_modify_code
sh: ftrace: Fix the comments for ftrace_modify_code()
ia64: ftrace: Fix the comments for ftrace_modify_code()
ftrace: Clean up ftrace_module_init() code
ftrace: Join functions ftrace_module_init() and ftrace_init_module()
tracing: Introduce TRACE_EVENT_FN_COND macro
tracing: Use seq_buf_used() in seq_buf_to_user() instead of len
bpf: Constify bpf_verifier_ops structure
ftrace: Have ftrace_ops_get_func() handle RCU and PER_CPU flags too
ftrace: Remove use of control list and ops
ftrace: Fix output of enabled_functions for showing tramp
ftrace: Fix a typo in comment
ftrace: Show all tramps registered to a record on ftrace_bug()
ftrace: Add variable ftrace_expected for archs to show expected code
ftrace: Add new type to distinguish what kind of ftrace_bug()
tracing: Update cond flag when enabling or disabling a trigger
...
Currently perf has its own list function within the ftrace infrastructure
that seems to be used only to allow for it to have per-cpu disabling as well
as a check to make sure that it's not called while RCU is not watching. It
uses something called the "control_ops" which is used to iterate over ops
under it with the control_list_func().
The problem is that this control_ops and control_list_func unnecessarily
complicates the code. By replacing FTRACE_OPS_FL_CONTROL with two new flags
(FTRACE_OPS_FL_RCU and FTRACE_OPS_FL_PER_CPU) we can remove all the code
that is special with the control ops and add the needed checks within the
generic ftrace_list_func().
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The name "ftrace" really refers to the function hook infrastructure. It
is not about the trace_events. The structures ftrace_event_call and
ftrace_event_class have nothing to do with the function hooks, and are
really trace_event structures. Rename ftrace_event_* to trace_event_*.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Both Linus (most recent) and Steve (a while ago) reported that perf
related callbacks have massive stack bloat.
The problem is that software events need a pt_regs in order to
properly report the event location and unwind stack. And because we
could not assume one was present we allocated one on stack and filled
it with minimal bits required for operation.
Now, pt_regs is quite large, so this is undesirable. Furthermore it
turns out that most sites actually have a pt_regs pointer available,
making this even more onerous, as the stack space is pointless waste.
This patch addresses the problem by observing that software events
have well defined nesting semantics, therefore we can use static
per-cpu storage instead of on-stack.
Linus made the further observation that all but the scheduler callers
of perf_sw_event() have a pt_regs available, so we change the regular
perf_sw_event() to require a valid pt_regs (where it used to be
optional) and add perf_sw_event_sched() for the scheduler.
We have a scheduler specific call instead of a more generic _noregs()
like construct because we can assume non-recursion from the scheduler
and thereby simplify the code further (_noregs would have to put the
recursion context call inline in order to assertain which __perf_regs
element to use).
One last note on the implementation of perf_trace_buf_prepare(); we
allow .regs = NULL for those cases where we already have a pt_regs
pointer available and do not need another.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Javi Merino <javi.merino@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Link: http://lkml.kernel.org/r/20141216115041.GW3337@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The 64-bit attr.config value for perf trace events was being copied into
an "int" before doing a comparison, meaning the top 32 bits were
being truncated.
As far as I can tell this didn't cause any errors, but it did mean
it was possible to create valid aliases for all the tracepoint ids
which I don't think was intended. (For example, 0xffffffff00000018
and 0x18 both enable the same tracepoint).
Signed-off-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1311151236100.11932@vincent-weaver-1.um.maine.edu
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Vince's perf-trinity fuzzer found yet another 'interesting' problem.
When we sample the irq_work_exit tracepoint with period==1 (or
PERF_SAMPLE_PERIOD) and we add an fasync SIGNAL handler we create an
infinite event generation loop:
,-> <IPI>
| irq_work_exit() ->
| trace_irq_work_exit() ->
| ...
| __perf_event_overflow() -> (due to fasync)
| irq_work_queue() -> (irq_work_list must be empty)
'--------- arch_irq_work_raise()
Similar things can happen due to regular poll() wakeups if we exceed
the ring-buffer wakeup watermark, or have an event_limit.
To avoid this, dis-allow sampling this particular tracepoint.
In order to achieve this, create a special perf_perm function pointer
for each event and call this (when set) on trying to create a
tracepoint perf event.
[ roasted: use expr... to allow for ',' in your expression ]
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Dave Jones <davej@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20131114152304.GC5364@laptop.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The current default perf paranoid level is "1" which has
"perf_paranoid_kernel()" return false, and giving any operations that
use it, access to normal users. Unfortunately, this includes function
tracing and normal users should not be allowed to enable function
tracing by default.
The proper level is defined at "-1" (full perf access), which
"perf_paranoid_tracepoint_raw()" will only give access to. Use that
check instead for enabling function tracing.
Reported-by: Dave Jones <davej@redhat.com>
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: stable@vger.kernel.org # 3.4+
CVE: CVE-2013-2930
Fixes: ced39002f5 ("ftrace, perf: Add support to use function tracepoint in perf")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Every perf_trace_buf_prepare() caller does
WARN_ONCE(size > PERF_MAX_TRACE_SIZE, message) and "message" is
almost the same.
Shift this WARN_ONCE() into perf_trace_buf_prepare(). This changes
the meaning of _ONCE, but I think this is fine.
- 4947014 2932448 10104832 17984294 1126b26 vmlinux
+ 4948422 2932448 10104832 17985702 11270a6 vmlinux
on my build.
Link: http://lkml.kernel.org/r/20130617170211.GA19813@redhat.com
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
* Fix include order for bison/flex-generated C files, from Ben Hutchings
* Build fixes and documentation corrections from David Ahern
* Group parsing support, from Jiri Olsa
* UI/gtk refactorings and improvements from Namhyung Kim
* NULL deref fix for perf script, from Namhyung Kim
* Assorted cleanups from Robert Richter
* Let O= makes handle relative paths, from Steven Rostedt
* perf script python fixes, from Feng Tang.
* Improve 'perf lock' error message when the needed tracepoints
are not present, from David Ahern.
* Initial bash completion support, from Frederic Weisbecker
* Allow building without libelf, from Namhyung Kim.
* Support DWARF CFI based unwind to have callchains when %bp
based unwinding is not possible, from Jiri Olsa.
* Symbol resolution fixes, while fixing support PPC64 files with an .opt ELF
section was the end goal, several fixes for code that handles all
architectures and cleanups are included, from Cody Schafer.
* Add a description for the JIT interface, from Andi Kleen.
* Assorted fixes for Documentation and build in 32 bit, from Robert Richter
* Add support for non-tracepoint events in perf script python, from Feng Tang
* Cache the libtraceevent event_format associated to each evsel early, so that we
avoid relookups, i.e. calling pevent_find_event repeatedly when processing
tracepoint events.
[ This is to reduce the surface contact with libtraceevents and make clear what
is that the perf tools needs from that lib: so far parsing the common and per
event fields. ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A few events are interesting not only for a current task.
For example, sched_stat_* events are interesting for a task
which wakes up. For this reason, it will be good if such
events will be delivered to a target task too.
Now a target task can be set by using __perf_task().
The original idea and a draft patch belongs to Peter Zijlstra.
I need these events for profiling sleep times. sched_switch is used for
getting callchains and sched_stat_* is used for getting time periods.
These events are combined in user space, then it can be analyzed by
perf tools.
Inspired-by: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arun Sharma <asharma@fb.com>
Signed-off-by: Andrew Vagin <avagin@openvz.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1342016098-213063-1-git-send-email-avagin@openvz.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Return as the 4th paramater to the function tracer callback the pt_regs.
Later patches that implement regs passing for the architectures will require
having the ftrace_ops set the SAVE_REGS flag, which will tell the arch
to take the time to pass a full set of pt_regs to the ftrace_ops callback
function. If the arch does not support it then it should pass NULL.
If an arch can pass full regs, then it should define:
ARCH_SUPPORTS_FTRACE_SAVE_REGS to 1
Link: http://lkml.kernel.org/r/20120702201821.019966811@goodmis.org
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently the function trace callback receives only the ip and parent_ip
of the function that it traced. It would be more powerful to also return
the ops that registered the function as well. This allows the same function
to act differently depending on what ftrace_ops registered it.
Link: http://lkml.kernel.org/r/20120612225424.267254552@goodmis.org
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Adding support to filter function trace event via perf
interface. It is now possible to use filter interface
in the perf tool like:
perf record -e ftrace:function --filter="(ip == mm_*)" ls
The filter syntax is restricted to the the 'ip' field only,
and following operators are accepted '==' '!=' '||', ending
up with the filter strings like:
ip == f1[, ]f2 ... || ip != f3[, ]f4 ...
with comma ',' or space ' ' as a function separator. If the
space ' ' is used as a separator, the right side of the
assignment needs to be enclosed in double quotes '"', e.g.:
perf record -e ftrace:function --filter '(ip == do_execve,sys_*,ext*)' ls
perf record -e ftrace:function --filter '(ip == "do_execve,sys_*,ext*")' ls
perf record -e ftrace:function --filter '(ip == "do_execve sys_* ext*")' ls
The '==' operator adds trace filter with same effect as would
be added via set_ftrace_filter file.
The '!=' operator adds trace filter with same effect as would
be added via set_ftrace_notrace file.
The right side of the '!=', '==' operators is list of functions
or regexp. to be added to filter separated by space.
The '||' operator is used for connecting multiple filter definitions
together. It is possible to have more than one '==' and '!='
operators within one filter string.
Link: http://lkml.kernel.org/r/1329317514-8131-8-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Adding perf registration support for the ftrace function event,
so it is now possible to register it via perf interface.
The perf_event struct statically contains ftrace_ops as a handle
for function tracer. The function tracer is registered/unregistered
in open/close actions.
To be efficient, we enable/disable ftrace_ops each time the traced
process is scheduled in/out (via TRACE_REG_PERF_(ADD|DELL) handlers).
This way tracing is enabled only when the process is running.
Intentionally using this way instead of the event's hw state
PERF_HES_STOPPED, which would not disable the ftrace_ops.
It is now possible to use function trace within perf commands
like:
perf record -e ftrace:function ls
perf stat -e ftrace:function ls
Allowed only for root.
Link: http://lkml.kernel.org/r/1329317514-8131-6-git-send-email-jolsa@redhat.com
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Linus Torvalds
Alexei Starovoitov
Jiri Olsa
Steven Rostedt (Red Hat)
Peter Zijlstra
Masami Hiramatsu
Jiri Olsa
Vince Weaver
Oleg Nesterov
Ingo Molnar
Andrew Vagin
Steven Rostedt