Change reparent_leader() to check ->exit_state instead of ->exit_signal,
this matches the similar EXIT_DEAD check in wait_consider_task() and
allows us to cleanup the do_notify_parent/task_detached logic.
task_detached() was really needed during reparenting before 9cd80bbb
"do_wait() optimization: do not place sub-threads on ->children list"
to filter out the sub-threads. After this change task_detached(p) can
only be true if p is the dead group_leader and its parent ignores
SIGCHLD, in this case the caller of do_notify_parent() is going to
reap this task and it should set EXIT_DEAD.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
Change other callers of do_notify_parent() to check the value it
returns, this makes the subsequent task_detached() unnecessary.
Mark do_notify_parent() as __must_check.
Use thread_group_leader() instead of !task_detached() to check
if we need to notify the real parent in wait_task_zombie().
Remove the stale comment in release_task(). "just for sanity" is
no longer true, we have to set EXIT_DEAD to avoid the races with
do_wait().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Kill tracehook_notify_death(), reimplement the logic in its caller,
exit_notify().
Also, change the exec_id's check to use thread_group_leader() instead
of task_detached(), this is more clear. This logic only applies to
the exiting leader, a sub-thread must never change its exit_signal.
Note: when the traced group leader exits the exit_signal-or-SIGCHLD
logic looks really strange:
- we notify the tracer even if !thread_group_empty() but
do_wait(WEXITED) can't work until all threads exit
- if the tracer is real_parent, it is not clear why can't
we use ->exit_signal event if !thread_group_empty()
-v2: do not try to fix the 2nd oddity to avoid the subtle behavior
change mixed with reorganization, suggested by Tejun.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
- change do_notify_parent() to return a boolean, true if the task should
be reaped because its parent ignores SIGCHLD.
- update the only caller which checks the returned value, exit_notify().
This temporary uglifies exit_notify() even more, will be cleanuped by
the next change.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
At this point, tracehooks aren't useful to mainline kernel and mostly
just add an extra layer of obfuscation. Although they have comments,
without actual in-kernel users, it is difficult to tell what are their
assumptions and they're actually trying to achieve. To mainline
kernel, they just aren't worth keeping around.
This patch kills the following trivial tracehooks.
* Ones testing whether task is ptraced. Replace with ->ptrace test.
tracehook_expect_breakpoints()
tracehook_consider_ignored_signal()
tracehook_consider_fatal_signal()
* ptrace_event() wrappers. Call directly.
tracehook_report_exec()
tracehook_report_exit()
tracehook_report_vfork_done()
* ptrace_release_task() wrapper. Call directly.
tracehook_finish_release_task()
* noop
tracehook_prepare_release_task()
tracehook_report_death()
This doesn't introduce any behavior change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
task_ptrace(task) simply dereferences task->ptrace and isn't even used
consistently only adding confusion. Kill it and directly access
->ptrace instead.
This doesn't introduce any behavior change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
The previous patch implemented async notification for ptrace but it
only worked while trace is running. This patch introduces
PTRACE_LISTEN which is suggested by Oleg Nestrov.
It's allowed iff tracee is in STOP trap and puts tracee into
quasi-running state - tracee never really runs but wait(2) and
ptrace(2) consider it to be running. While ptracer is listening,
tracee is allowed to re-enter STOP to notify an async event.
Listening state is cleared on the first notification. Ptracer can
also clear it by issuing INTERRUPT - tracee will re-trap into STOP
with listening state cleared.
This allows ptracer to monitor group stop state without running tracee
- use INTERRUPT to put tracee into STOP trap, issue LISTEN and then
wait(2) to wait for the next group stop event. When it happens,
PTRACE_GETSIGINFO provides information to determine the current state.
Test program follows.
#define PTRACE_SEIZE 0x4206
#define PTRACE_INTERRUPT 0x4207
#define PTRACE_LISTEN 0x4208
#define PTRACE_SEIZE_DEVEL 0x80000000
static const struct timespec ts1s = { .tv_sec = 1 };
int main(int argc, char **argv)
{
pid_t tracee, tracer;
int i;
tracee = fork();
if (!tracee)
while (1)
pause();
tracer = fork();
if (!tracer) {
siginfo_t si;
ptrace(PTRACE_SEIZE, tracee, NULL,
(void *)(unsigned long)PTRACE_SEIZE_DEVEL);
ptrace(PTRACE_INTERRUPT, tracee, NULL, NULL);
repeat:
waitid(P_PID, tracee, NULL, WSTOPPED);
ptrace(PTRACE_GETSIGINFO, tracee, NULL, &si);
if (!si.si_code) {
printf("tracer: SIG %d\n", si.si_signo);
ptrace(PTRACE_CONT, tracee, NULL,
(void *)(unsigned long)si.si_signo);
goto repeat;
}
printf("tracer: stopped=%d signo=%d\n",
si.si_signo != SIGTRAP, si.si_signo);
if (si.si_signo != SIGTRAP)
ptrace(PTRACE_LISTEN, tracee, NULL, NULL);
else
ptrace(PTRACE_CONT, tracee, NULL, NULL);
goto repeat;
}
for (i = 0; i < 3; i++) {
nanosleep(&ts1s, NULL);
printf("mother: SIGSTOP\n");
kill(tracee, SIGSTOP);
nanosleep(&ts1s, NULL);
printf("mother: SIGCONT\n");
kill(tracee, SIGCONT);
}
nanosleep(&ts1s, NULL);
kill(tracer, SIGKILL);
kill(tracee, SIGKILL);
return 0;
}
This is identical to the program to test TRAP_NOTIFY except that
tracee is PTRACE_LISTEN'd instead of PTRACE_CONT'd when group stopped.
This allows ptracer to monitor when group stop ends without running
tracee.
# ./test-listen
tracer: stopped=0 signo=5
mother: SIGSTOP
tracer: SIG 19
tracer: stopped=1 signo=19
mother: SIGCONT
tracer: stopped=0 signo=5
tracer: SIG 18
mother: SIGSTOP
tracer: SIG 19
tracer: stopped=1 signo=19
mother: SIGCONT
tracer: stopped=0 signo=5
tracer: SIG 18
mother: SIGSTOP
tracer: SIG 19
tracer: stopped=1 signo=19
mother: SIGCONT
tracer: stopped=0 signo=5
tracer: SIG 18
-v2: Moved JOBCTL_LISTENING check in wait_task_stopped() into
task_stopped_code() as suggested by Oleg.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
wait_task_stopped() tested task_stopped_code() without acquiring
siglock and, if stop condition existed, called wait_task_stopped() and
directly returned the result. This patch moves the initial
task_stopped_code() testing into wait_task_stopped() and make
wait_consider_task() fall through to wait_task_continue() on 0 return.
This is for the following two reasons.
* Because the initial task_stopped_code() test is done without
acquiring siglock, it may race against SIGCONT generation. The
stopped condition might have been replaced by continued state by the
time wait_task_stopped() acquired siglock. This may lead to
unexpected failure of WNOHANG waits.
This reorganization addresses this single race case but there are
other cases - TASK_RUNNING -> TASK_STOPPED transition and EXIT_*
transitions.
* Scheduled ptrace updates require changes to the initial test which
would fit better inside wait_task_stopped().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
When a task is traced and is in a stopped state, the tracer
may execute a ptrace request to examine the tracee state and
get its task struct. Right after, the tracee can be killed
and thus its breakpoints released.
This can happen concurrently when the tracer is in the middle
of reading or modifying these breakpoints, leading to dereferencing
a freed pointer.
Hence, to prepare the fix, create a generic breakpoint reference
holding API. When a reference on the breakpoints of a task is
held, the breakpoints won't be released until the last reference
is dropped. After that, no more ptrace request on the task's
breakpoints can be serviced for the tracer.
Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: v2.6.33.. <stable@kernel.org>
Link: http://lkml.kernel.org/r/1302284067-7860-2-git-send-email-fweisbec@gmail.com
Currently a real parent can't access job control stopped/continued
events through a ptraced child. This utterly breaks job control when
the children are ptraced.
For example, if a program is run from an interactive shell and then
strace(1) attaches to it, pressing ^Z would send SIGTSTP and strace(1)
would notice it but the shell has no way to tell whether the child
entered job control stop and thus can't tell when to take over the
terminal - leading to awkward lone ^Z on the terminal.
Because the job control and ptrace stopped states are independent,
there is no reason to prevent real parents from accessing the stopped
state regardless of ptrace. The continued state isn't separate but
ptracers don't have any use for them as ptracees can never resume
without explicit command from their ptracers, so as long as ptracers
don't consume it, it should be fine.
Although this is a behavior change, because the previous behavior is
utterly broken when viewed from real parents and the change is only
visible to real parents, I don't think it's necessary to make this
behavior optional.
One situation to be careful about is when a task from the real
parent's group is ptracing. The parent group is the recipient of both
ptrace and job control stop events and one stop can be reported as
both job control and ptrace stops. As this can break the current
ptrace users, suppress job control stopped events for these cases.
If a real parent ptracer wants to know about both job control and
ptrace stops, it can create a separate process to serve the role of
real parent.
Note that this only updates wait(2) side of things. The real parent
can access the states via wait(2) but still is not properly notified
(woken up and delivered signal). Test case polls wait(2) with WNOHANG
to work around. Notification will be updated by future patches.
Test case follows.
#include <stdio.h>
#include <unistd.h>
#include <time.h>
#include <errno.h>
#include <sys/types.h>
#include <sys/ptrace.h>
#include <sys/wait.h>
int main(void)
{
const struct timespec ts100ms = { .tv_nsec = 100000000 };
pid_t tracee, tracer;
siginfo_t si;
int i;
tracee = fork();
if (tracee == 0) {
while (1) {
printf("tracee: SIGSTOP\n");
raise(SIGSTOP);
nanosleep(&ts100ms, NULL);
printf("tracee: SIGCONT\n");
raise(SIGCONT);
nanosleep(&ts100ms, NULL);
}
}
waitid(P_PID, tracee, &si, WSTOPPED | WNOHANG | WNOWAIT);
tracer = fork();
if (tracer == 0) {
nanosleep(&ts100ms, NULL);
ptrace(PTRACE_ATTACH, tracee, NULL, NULL);
for (i = 0; i < 11; i++) {
si.si_pid = 0;
waitid(P_PID, tracee, &si, WSTOPPED);
if (si.si_pid && si.si_code == CLD_TRAPPED)
ptrace(PTRACE_CONT, tracee, NULL,
(void *)(long)si.si_status);
}
printf("tracer: EXITING\n");
return 0;
}
while (1) {
si.si_pid = 0;
waitid(P_PID, tracee, &si,
WSTOPPED | WCONTINUED | WEXITED | WNOHANG);
if (si.si_pid)
printf("mommy : WAIT status=%02d code=%02d\n",
si.si_status, si.si_code);
nanosleep(&ts100ms, NULL);
}
return 0;
}
Before the patch, while ptraced, the parent can't see any job control
events.
tracee: SIGSTOP
mommy : WAIT status=19 code=05
tracee: SIGCONT
tracee: SIGSTOP
tracee: SIGCONT
tracee: SIGSTOP
tracee: SIGCONT
tracee: SIGSTOP
tracer: EXITING
mommy : WAIT status=19 code=05
^C
After the patch,
tracee: SIGSTOP
mommy : WAIT status=19 code=05
tracee: SIGCONT
mommy : WAIT status=18 code=06
tracee: SIGSTOP
mommy : WAIT status=19 code=05
tracee: SIGCONT
mommy : WAIT status=18 code=06
tracee: SIGSTOP
mommy : WAIT status=19 code=05
tracee: SIGCONT
mommy : WAIT status=18 code=06
tracee: SIGSTOP
tracer: EXITING
mommy : WAIT status=19 code=05
^C
-v2: Oleg pointed out that wait(2) should be suppressed for the real
parent's group instead of only the real parent task itself.
Updated accordingly.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
wait(2) and friends allow access to stopped/continued states through
zombies, which is required as the states are process-wide and should
be accessible whether the leader task is alive or undead.
wait_consider_task() implements this by always clearing notask_error
and going through wait_task_stopped/continued() for unreaped zombies.
However, while ptraced, the stopped state is per-task and as such if
the ptracee became a zombie, there's no further stopped event to
listen to and wait(2) and friends should return -ECHILD on the tracee.
Fix it by clearing notask_error only if WCONTINUED | WEXITED is set
for ptraced zombies. While at it, document why clearing notask_error
is safe for each case.
Test case follows.
#include <stdio.h>
#include <unistd.h>
#include <pthread.h>
#include <time.h>
#include <sys/types.h>
#include <sys/ptrace.h>
#include <sys/wait.h>
static void *nooper(void *arg)
{
pause();
return NULL;
}
int main(void)
{
const struct timespec ts1s = { .tv_sec = 1 };
pid_t tracee, tracer;
siginfo_t si;
tracee = fork();
if (tracee == 0) {
pthread_t thr;
pthread_create(&thr, NULL, nooper, NULL);
nanosleep(&ts1s, NULL);
printf("tracee exiting\n");
pthread_exit(NULL); /* let subthread run */
}
tracer = fork();
if (tracer == 0) {
ptrace(PTRACE_ATTACH, tracee, NULL, NULL);
while (1) {
if (waitid(P_PID, tracee, &si, WSTOPPED) < 0) {
perror("waitid");
break;
}
ptrace(PTRACE_CONT, tracee, NULL,
(void *)(long)si.si_status);
}
return 0;
}
waitid(P_PID, tracer, &si, WEXITED);
kill(tracee, SIGKILL);
return 0;
}
Before the patch, after the tracee becomes a zombie, the tracer's
waitid(WSTOPPED) never returns and the program doesn't terminate.
tracee exiting
^C
After the patch, tracee exiting triggers waitid() to fail.
tracee exiting
waitid: No child processes
-v2: Oleg pointed out that exited in addition to continued can happen
for ptraced dead group leader. Clear notask_error for ptraced
child on WEXITED too.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Move EXIT_DEAD test in wait_consider_task() above ptrace check. As
ptraced tasks can't be EXIT_DEAD, this change doesn't cause any
behavior change. This is to prepare for further changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
This patch adds support for creating a queuing context outside
of the queue itself. This enables us to batch up pieces of IO
before grabbing the block device queue lock and submitting them to
the IO scheduler.
The context is created on the stack of the process and assigned in
the task structure, so that we can auto-unplug it if we hit a schedule
event.
The current queue plugging happens implicitly if IO is submitted to
an empty device, yet callers have to remember to unplug that IO when
they are going to wait for it. This is an ugly API and has caused bugs
in the past. Additionally, it requires hacks in the vm (->sync_page()
callback) to handle that logic. By switching to an explicit plugging
scheme we make the API a lot nicer and can get rid of the ->sync_page()
hack in the vm.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
In particular this patch move perf_event_exit_task() before
cgroup_exit() to allow for cgroup support. The cgroup_exit()
function detaches the cgroups attached to a task.
Other movements include hoisting some definitions and inlines
at the top of perf_event.c
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d22058b.cdace30a.4657.ffff95b1@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
__get_cpu_var() can be replaced with this_cpu_read and will then use a
single read instruction with implied address calculation to access the
correct per cpu instance.
However, the address of a per cpu variable passed to __this_cpu_read()
cannot be determined (since it's an implied address conversion through
segment prefixes). Therefore apply this only to uses of __get_cpu_var
where the address of the variable is not used.
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Hugh Dickins <hughd@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
If a user manages to trigger an oops with fs set to KERNEL_DS, fs is not
otherwise reset before do_exit(). do_exit may later (via mm_release in
fork.c) do a put_user to a user-controlled address, potentially allowing
a user to leverage an oops into a controlled write into kernel memory.
This is only triggerable in the presence of another bug, but this
potentially turns a lot of DoS bugs into privilege escalations, so it's
worth fixing. I have proof-of-concept code which uses this bug along
with CVE-2010-3849 to write a zero to an arbitrary kernel address, so
I've tested that this is not theoretical.
A more logical place to put this fix might be when we know an oops has
occurred, before we call do_exit(), but that would involve changing
every architecture, in multiple places.
Let's just stick it in do_exit instead.
[akpm@linux-foundation.org: update code comment]
Signed-off-by: Nelson Elhage <nelhage@ksplice.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
posix-cpu-timers.c correctly assumes that the dying process does
posix_cpu_timers_exit_group() and removes all !CPUCLOCK_PERTHREAD
timers from signal->cpu_timers list.
But, it also assumes that timer->it.cpu.task is always the group
leader, and thus the dead ->task means the dead thread group.
This is obviously not true after de_thread() changes the leader.
After that almost every posix_cpu_timer_ method has problems.
It is not simple to fix this bug correctly. First of all, I think
that timer->it.cpu should use struct pid instead of task_struct.
Also, the locking should be reworked completely. In particular,
tasklist_lock should not be used at all. This all needs a lot of
nontrivial and hard-to-test changes.
Change __exit_signal() to do posix_cpu_timers_exit_group() when
the old leader dies during exec. This is not the fix, just the
temporary hack to hide the problem for 2.6.37 and stable. IOW,
this is obviously wrong but this is what we currently have anyway:
cpu timers do not work after mt exec.
In theory this change adds another race. The exiting leader can
detach the timers which were attached to the new leader. However,
the window between de_thread() and release_task() is small, we
can pretend that sys_timer_create() was called before de_thread().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
find_new_reaper() releases and regrabs tasklist_lock but was missing
proper annotations. Add it. This remove following sparse warning:
warning: context imbalance in 'find_new_reaper' - unexpected unlock
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's pointless to kill a task if another thread sharing its mm cannot be
killed to allow future memory freeing. A subsequent patch will prevent
kills in such cases, but first it's necessary to have a way to flag a task
that shares memory with an OOM_DISABLE task that doesn't incur an
additional tasklist scan, which would make select_bad_process() an O(n^2)
function.
This patch adds an atomic counter to struct mm_struct that follows how
many threads attached to it have an oom_score_adj of OOM_SCORE_ADJ_MIN.
They cannot be killed by the kernel, so their memory cannot be freed in
oom conditions.
This only requires task_lock() on the task that we're operating on, it
does not require mm->mmap_sem since task_lock() pins the mm and the
operation is atomic.
[rientjes@google.com: changelog and sys_unshare() code]
[rientjes@google.com: protect oom_disable_count with task_lock in fork]
[rientjes@google.com: use old_mm for oom_disable_count in exec]
Signed-off-by: Ying Han <yinghan@google.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I missed a perf_event_ctxp user when converting it to an array. Pull this
last user into perf_event.c as well and fix it up.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Using a program like the following:
#include <stdlib.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/wait.h>
int main() {
id_t id;
siginfo_t infop;
pid_t res;
id = fork();
if (id == 0) { sleep(1); exit(0); }
kill(id, SIGSTOP);
alarm(1);
waitid(P_PID, id, &infop, WCONTINUED);
return 0;
}
to call waitid() on a stopped process results in access to the child task's
credentials without the RCU read lock being held - which may be replaced in the
meantime - eliciting the following warning:
===================================================
[ INFO: suspicious rcu_dereference_check() usage. ]
---------------------------------------------------
kernel/exit.c:1460 invoked rcu_dereference_check() without protection!
other info that might help us debug this:
rcu_scheduler_active = 1, debug_locks = 1
2 locks held by waitid02/22252:
#0: (tasklist_lock){.?.?..}, at: [<ffffffff81061ce5>] do_wait+0xc5/0x310
#1: (&(&sighand->siglock)->rlock){-.-...}, at: [<ffffffff810611da>]
wait_consider_task+0x19a/0xbe0
stack backtrace:
Pid: 22252, comm: waitid02 Not tainted 2.6.35-323cd+ #3
Call Trace:
[<ffffffff81095da4>] lockdep_rcu_dereference+0xa4/0xc0
[<ffffffff81061b31>] wait_consider_task+0xaf1/0xbe0
[<ffffffff81061d15>] do_wait+0xf5/0x310
[<ffffffff810620b6>] sys_waitid+0x86/0x1f0
[<ffffffff8105fce0>] ? child_wait_callback+0x0/0x70
[<ffffffff81003282>] system_call_fastpath+0x16/0x1b
This is fixed by holding the RCU read lock in wait_task_continued() to ensure
that the task's current credentials aren't destroyed between us reading the
cred pointer and us reading the UID from those credentials.
Furthermore, protect wait_task_stopped() in the same way.
We don't need to keep holding the RCU read lock once we've read the UID from
the credentials as holding the RCU read lock doesn't stop the target task from
changing its creds under us - so the credentials may be outdated immediately
after we've read the pointer, lock or no lock.
Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov
Tejun Heo
Linus Torvalds
Frederic Weisbecker
Lucas De Marchi
Jens Axboe
Stephane Eranian
Christoph Lameter
Nelson Elhage
Namhyung Kim
Ying Han
Peter Zijlstra
Daniel J Blueman