Merge 3.9-rc5 into tty-next

We need the fixes here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

CREDITS

@@ -1510,6 +1510,14 @@ D: Natsemi ethernet
 D: Cobalt Networks (x86) support
 D: This-and-That
 
+N: Mark M. Hoffman
+E: mhoffman@lightlink.com
+D: asb100, lm93 and smsc47b397 hardware monitoring drivers
+D: hwmon subsystem core
+D: hwmon subsystem maintainer
+D: i2c-sis96x and i2c-stub SMBus drivers
+S: USA
+
 N: Dirk Hohndel
 E: hohndel@suse.de
 D: The XFree86[tm] Project

Documentation/hwmon/lm75

@@ -23,7 +23,7 @@ Supported chips:
     Datasheet: Publicly available at the Maxim website
                http://www.maxim-ic.com/
   * Microchip (TelCom) TCN75
-    Prefix: 'lm75'
+    Prefix: 'tcn75'
     Addresses scanned: none
     Datasheet: Publicly available at the Microchip website
                http://www.microchip.com/

Documentation/i2c/busses/i2c-diolan-u2c

@@ -5,7 +5,7 @@ Supported adapters:
     Documentation:
 	http://www.diolan.com/i2c/u2c12.html
 
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
 
 Description
 -----------

Documentation/networking/ipvs-sysctl.txt

@@ -15,6 +15,13 @@ amemthresh - INTEGER
         enabled and the variable is automatically set to 2, otherwise
         the strategy is disabled and the variable is  set  to 1.
 
+backup_only - BOOLEAN
+	0 - disabled (default)
+	not 0 - enabled
+
+	If set, disable the director function while the server is
+	in backup mode to avoid packet loops for DR/TUN methods.
+
 conntrack - BOOLEAN
 	0 - disabled (default)
 	not 0 - enabled

Documentation/sound/alsa/ALSA-Configuration.txt

@@ -912,7 +912,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     models depending on the codec chip.  The list of available models
     is found in HD-Audio-Models.txt
 
-    The model name "genric" is treated as a special case.  When this
+    The model name "generic" is treated as a special case.  When this
     model is given, the driver uses the generic codec parser without
     "codec-patch".  It's sometimes good for testing and debugging.
 

Documentation/sound/alsa/seq_oss.html

@@ -285,7 +285,7 @@ sample data.
 <H4>
 7.2.4 Close Callback</H4>
 The <TT>close</TT> callback is called when this device is closed by the
-applicaion. If any private data was allocated in open callback, it must
+application. If any private data was allocated in open callback, it must
 be released in the close callback. The deletion of ALSA port should be
 done here, too. This callback must not be NULL.
 <H4>

MAINTAINERS

@@ -1338,12 +1338,6 @@ S:	Maintained
 F:	drivers/platform/x86/asus*.c
 F:	drivers/platform/x86/eeepc*.c
 
-ASUS ASB100 HARDWARE MONITOR DRIVER
-M:	"Mark M. Hoffman" <mhoffman@lightlink.com>
-L:	lm-sensors@lm-sensors.org
-S:	Maintained
-F:	drivers/hwmon/asb100.c
-
 ASYNCHRONOUS TRANSFERS/TRANSFORMS (IOAT) API
 M:	Dan Williams <djbw@fb.com>
 W:	http://sourceforge.net/projects/xscaleiop
@@ -1467,6 +1461,12 @@ F:	drivers/dma/at_hdmac.c
 F:	drivers/dma/at_hdmac_regs.h
 F:	include/linux/platform_data/dma-atmel.h
 
+ATMEL I2C DRIVER
+M:	Ludovic Desroches <ludovic.desroches@atmel.com>
+L:	linux-i2c@vger.kernel.org
+S:	Supported
+F:	drivers/i2c/busses/i2c-at91.c
+
 ATMEL ISI DRIVER
 M:	Josh Wu <josh.wu@atmel.com>
 L:	linux-media@vger.kernel.org
@@ -2629,7 +2629,7 @@ F:	include/uapi/drm/
 
 INTEL DRM DRIVERS (excluding Poulsbo, Moorestown and derivative chipsets)
 M:	Daniel Vetter <daniel.vetter@ffwll.ch>
-L:	intel-gfx@lists.freedesktop.org (subscribers-only)
+L:	intel-gfx@lists.freedesktop.org
 L:	dri-devel@lists.freedesktop.org
 T:	git git://people.freedesktop.org/~danvet/drm-intel
 S:	Supported
@@ -3242,6 +3242,12 @@ F:	Documentation/firmware_class/
 F:	drivers/base/firmware*.c
 F:	include/linux/firmware.h
 
+FLASHSYSTEM DRIVER (IBM FlashSystem 70/80 PCI SSD Flash Card)
+M:	Joshua Morris <josh.h.morris@us.ibm.com>
+M:	Philip Kelleher <pjk1939@linux.vnet.ibm.com>
+S:	Maintained
+F:	drivers/block/rsxx/
+
 FLOPPY DRIVER
 M:	Jiri Kosina <jkosina@suse.cz>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/floppy.git
@@ -3851,7 +3857,7 @@ F:	drivers/i2c/busses/i2c-ismt.c
 F:	Documentation/i2c/busses/i2c-ismt
 
 I2C/SMBUS STUB DRIVER
-M:	"Mark M. Hoffman" <mhoffman@lightlink.com>
+M:	Jean Delvare <khali@linux-fr.org>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/i2c/i2c-stub.c
@@ -5647,6 +5653,14 @@ S:	Maintained
 F:	drivers/video/riva/
 F:	drivers/video/nvidia/
 
+NVM EXPRESS DRIVER
+M:	Matthew Wilcox <willy@linux.intel.com>
+L:	linux-nvme@lists.infradead.org
+T:	git git://git.infradead.org/users/willy/linux-nvme.git
+S:	Supported
+F:	drivers/block/nvme.c
+F:	include/linux/nvme.h
+
 OMAP SUPPORT
 M:	Tony Lindgren <tony@atomide.com>
 L:	linux-omap@vger.kernel.org
@@ -5675,7 +5689,7 @@ S:	Maintained
 F:	arch/arm/*omap*/*clock*
 
 OMAP POWER MANAGEMENT SUPPORT
-M:	Kevin Hilman <khilman@ti.com>
+M:	Kevin Hilman <khilman@deeprootsystems.com>
 L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	arch/arm/*omap*/*pm*
@@ -5769,7 +5783,7 @@ F:	arch/arm/*omap*/usb*
 
 OMAP GPIO DRIVER
 M:	Santosh Shilimkar <santosh.shilimkar@ti.com>
-M:	Kevin Hilman <khilman@ti.com>
+M:	Kevin Hilman <khilman@deeprootsystems.com>
 L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	drivers/gpio/gpio-omap.c
@@ -6201,7 +6215,7 @@ F:	include/linux/power_supply.h
 F:	drivers/power/
 
 PNP SUPPORT
-M:	Adam Belay <abelay@mit.edu>
+M:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 M:	Bjorn Helgaas <bhelgaas@google.com>
 S:	Maintained
 F:	drivers/pnp/
@@ -6543,12 +6557,6 @@ S:	Maintained
 F:	Documentation/blockdev/ramdisk.txt
 F:	drivers/block/brd.c
 
-RAMSAM DRIVER (IBM RamSan 70/80 PCI SSD Flash Card)
-M:	Joshua Morris <josh.h.morris@us.ibm.com>
-M:	Philip Kelleher <pjk1939@linux.vnet.ibm.com>
-S:	Maintained
-F:	drivers/block/rsxx/
-
 RANDOM NUMBER DRIVER
 M:	Theodore Ts'o" <tytso@mit.edu>
 S:	Maintained
@@ -7165,7 +7173,7 @@ F:	arch/arm/mach-s3c2410/bast-irq.c
 
 TI DAVINCI MACHINE SUPPORT
 M:	Sekhar Nori <nsekhar@ti.com>
-M:	Kevin Hilman <khilman@ti.com>
+M:	Kevin Hilman <khilman@deeprootsystems.com>
 L:	davinci-linux-open-source@linux.davincidsp.com (moderated for non-subscribers)
 T:	git git://gitorious.org/linux-davinci/linux-davinci.git
 Q:	http://patchwork.kernel.org/project/linux-davinci/list/
@@ -7198,13 +7206,6 @@ L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/sis/sis900.*
 
-SIS 96X I2C/SMBUS DRIVER
-M:	"Mark M. Hoffman" <mhoffman@lightlink.com>
-L:	linux-i2c@vger.kernel.org
-S:	Maintained
-F:	Documentation/i2c/busses/i2c-sis96x
-F:	drivers/i2c/busses/i2c-sis96x.c
-
 SIS FRAMEBUFFER DRIVER
 M:	Thomas Winischhofer <thomas@winischhofer.net>
 W:	http://www.winischhofer.net/linuxsisvga.shtml
@@ -7282,7 +7283,7 @@ F:	Documentation/hwmon/sch5627
 F:	drivers/hwmon/sch5627.c
 
 SMSC47B397 HARDWARE MONITOR DRIVER
-M:	"Mark M. Hoffman" <mhoffman@lightlink.com>
+M:	Jean Delvare <khali@linux-fr.org>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/smsc47b397
@@ -7705,9 +7706,10 @@ F:	include/linux/swiotlb.h
 
 SYNOPSYS ARC ARCHITECTURE
 M:	Vineet Gupta <vgupta@synopsys.com>
-L:	linux-snps-arc@vger.kernel.org
 S:	Supported
 F:	arch/arc/
+F:	Documentation/devicetree/bindings/arc/
+F:	drivers/tty/serial/arc-uart.c
 
 SYSV FILESYSTEM
 M:	Christoph Hellwig <hch@infradead.org>

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 9
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc5
 NAME = Unicycling Gorilla
 
 # *DOCUMENTATION*

arch/arc/include/asm/dma-mapping.h

@@ -126,7 +126,7 @@ dma_map_sg(struct device *dev, struct scatterlist *sg,
 	int i;
 
 	for_each_sg(sg, s, nents, i)
-		sg->dma_address = dma_map_page(dev, sg_page(s), s->offset,
+		s->dma_address = dma_map_page(dev, sg_page(s), s->offset,
 					       s->length, dir);
 
 	return nents;

arch/arc/include/asm/elf.h

@@ -72,7 +72,4 @@ extern int elf_check_arch(const struct elf32_hdr *);
  */
 #define ELF_PLATFORM	(NULL)
 
-#define SET_PERSONALITY(ex) \
-	set_personality(PER_LINUX | (current->personality & (~PER_MASK)))
-
 #endif

arch/arc/include/asm/entry.h

@@ -415,7 +415,7 @@
  *-------------------------------------------------------------*/
 .macro SAVE_ALL_EXCEPTION   marker
 
-	st      \marker, [sp, 8]
+	st      \marker, [sp, 8]	/* orig_r8 */
 	st      r0, [sp, 4]    /* orig_r0, needed only for sys calls */
 
 	/* Restore r9 used to code the early prologue */

arch/arc/include/asm/kgdb.h

@@ -13,7 +13,7 @@
 
 #ifdef CONFIG_KGDB
 
-#include <asm/user.h>
+#include <asm/ptrace.h>
 
 /* to ensure compatibility with Linux 2.6.35, we don't implement the get/set
  * register API yet */
@@ -53,9 +53,7 @@ enum arc700_linux_regnums {
 };
 
 #else
-static inline void kgdb_trap(struct pt_regs *regs, int param)
+#define kgdb_trap(regs, param)
-{
-}
 #endif
 
 #endif	/* __ARC_KGDB_H__ */

arch/arc/include/asm/ptrace.h

@@ -123,7 +123,7 @@ static inline long regs_return_value(struct pt_regs *regs)
 #define orig_r8_IS_SCALL		0x0001
 #define orig_r8_IS_SCALL_RESTARTED	0x0002
 #define orig_r8_IS_BRKPT		0x0004
-#define orig_r8_IS_EXCPN		0x0004
+#define orig_r8_IS_EXCPN		0x0008
 #define orig_r8_IS_IRQ1			0x0010
 #define orig_r8_IS_IRQ2			0x0020
 

arch/arc/include/asm/syscalls.h

@@ -16,8 +16,6 @@
 #include <linux/types.h>
 
 int sys_clone_wrapper(int, int, int, int, int);
-int sys_fork_wrapper(void);
-int sys_vfork_wrapper(void);
 int sys_cacheflush(uint32_t, uint32_t uint32_t);
 int sys_arc_settls(void *);
 int sys_arc_gettls(void);

arch/arc/include/uapi/asm/ptrace.h

@@ -28,14 +28,14 @@
 */
 struct user_regs_struct {
 
-	struct scratch {
+	struct {
 		long pad;
 		long bta, lp_start, lp_end, lp_count;
 		long status32, ret, blink, fp, gp;
 		long r12, r11, r10, r9, r8, r7, r6, r5, r4, r3, r2, r1, r0;
 		long sp;
 	} scratch;
-	struct callee {
+	struct {
 		long pad;
 		long r25, r24, r23, r22, r21, r20;
 		long r19, r18, r17, r16, r15, r14, r13;

arch/arc/kernel/entry.S

@@ -452,7 +452,7 @@ tracesys:
 	; using ERET won't work since next-PC has already committed
 	lr  r12, [efa]
 	GET_CURR_TASK_FIELD_PTR   TASK_THREAD, r11
-	st  r12, [r11, THREAD_FAULT_ADDR]
+	st  r12, [r11, THREAD_FAULT_ADDR]	; thread.fault_address
 
 	; PRE Sys Call Ptrace hook
 	mov r0, sp			; pt_regs needed
@@ -792,31 +792,6 @@ ARC_EXIT ret_from_fork
 
 ;################### Special Sys Call Wrappers ##########################
 
-; TBD: call do_fork directly from here
-ARC_ENTRY sys_fork_wrapper
-	SAVE_CALLEE_SAVED_USER
-	bl  @sys_fork
-	DISCARD_CALLEE_SAVED_USER
-
-	GET_CURR_THR_INFO_FLAGS   r10
-	btst r10, TIF_SYSCALL_TRACE
-	bnz  tracesys_exit
-
-	b ret_from_system_call
-ARC_EXIT sys_fork_wrapper
-
-ARC_ENTRY sys_vfork_wrapper
-	SAVE_CALLEE_SAVED_USER
-	bl  @sys_vfork
-	DISCARD_CALLEE_SAVED_USER
-
-	GET_CURR_THR_INFO_FLAGS   r10
-	btst r10, TIF_SYSCALL_TRACE
-	bnz  tracesys_exit
-
-	b ret_from_system_call
-ARC_EXIT sys_vfork_wrapper
-
 ARC_ENTRY sys_clone_wrapper
 	SAVE_CALLEE_SAVED_USER
 	bl  @sys_clone

arch/arc/kernel/kgdb.c

@@ -9,6 +9,7 @@
  */
 
 #include <linux/kgdb.h>
+#include <linux/sched.h>
 #include <asm/disasm.h>
 #include <asm/cacheflush.h>
 

arch/arc/kernel/setup.c

@@ -232,10 +232,8 @@ char *arc_extn_mumbojumbo(int cpu_id, char *buf, int len)
 
 	n += scnprintf(buf + n, len - n, "\n");
 
-#ifdef _ASM_GENERIC_UNISTD_H
 	n += scnprintf(buf + n, len - n,
-		       "OS ABI [v2]\t: asm-generic/{unistd,stat,fcntl}\n");
+		       "OS ABI [v3]\t: no-legacy-syscalls\n");
-#endif
 
 	return buf;
 }

arch/arc/kernel/sys.c

@@ -6,8 +6,6 @@
 #include <asm/syscalls.h>
 
 #define sys_clone	sys_clone_wrapper
-#define sys_fork	sys_fork_wrapper
-#define sys_vfork	sys_vfork_wrapper
 
 #undef __SYSCALL
 #define __SYSCALL(nr, call) [nr] = (call),

arch/arm/Kconfig

@@ -49,7 +49,6 @@ config ARM
 	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_UID16
-	select VIRT_TO_BUS
 	select KTIME_SCALAR
 	select PERF_USE_VMALLOC
 	select RTC_LIB
@@ -743,6 +742,7 @@ config ARCH_RPC
 	select NEED_MACH_IO_H
 	select NEED_MACH_MEMORY_H
 	select NO_IOPORT
+	select VIRT_TO_BUS
 	help
 	  On the Acorn Risc-PC, Linux can support the internal IDE disk and
 	  CD-ROM interface, serial and parallel port, and the floppy drive.
@@ -878,6 +878,7 @@ config ARCH_SHARK
 	select ISA_DMA
 	select NEED_MACH_MEMORY_H
 	select PCI
+	select VIRT_TO_BUS
 	select ZONE_DMA
 	help
 	  Support for the StrongARM based Digital DNARD machine, also known
@@ -1005,12 +1006,12 @@ config ARCH_MULTI_V4_V5
 	bool
 
 config ARCH_MULTI_V6
-	bool "ARMv6 based platforms (ARM11, Scorpion, ...)"
+	bool "ARMv6 based platforms (ARM11)"
 	select ARCH_MULTI_V6_V7
 	select CPU_V6
 
 config ARCH_MULTI_V7
-	bool "ARMv7 based platforms (Cortex-A, PJ4, Krait)"
+	bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
 	default y
 	select ARCH_MULTI_V6_V7
 	select ARCH_VEXPRESS
@@ -1461,10 +1462,6 @@ config ISA_DMA
 	bool
 	select ISA_DMA_API
 
-config ARCH_NO_VIRT_TO_BUS
-	def_bool y
-	depends on !ARCH_RPC && !ARCH_NETWINDER && !ARCH_SHARK
-
 # Select ISA DMA interface
 config ISA_DMA_API
 	bool