apfs/linux-apfs
0
0
Fork 0
mirror of https://github.com/linux-apfs/linux-apfs.git synced 2026-05-01 15:00:59 -07:00
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'linus' into cpus4096-for-linus

Browse Source 
Conflicts:

	net/sunrpc/svc.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
This commit is contained in:
Ingo Molnar
2008-07-21 17:19:50 +02:00
parent c4762aba0b 14b395e35d
commit eb6a12c242
1549 changed files with 148834 additions and 79493 deletions
Download Patch File Download Diff File Expand all files Collapse all files
Documentation/feature-removal-schedule.txt
+22
View File
@@ -308,9 +308,31 @@ Who: Matthew Wilcox <willy@linux.intel.com>
---------------------------
What: SCTP_GET_PEER_ADDRS_NUM_OLD, SCTP_GET_PEER_ADDRS_OLD,
SCTP_GET_LOCAL_ADDRS_NUM_OLD, SCTP_GET_LOCAL_ADDRS_OLD
When: June 2009
Why: A newer version of the options have been introduced in 2005 that
removes the limitions of the old API. The sctp library has been
converted to use these new options at the same time. Any user
space app that directly uses the old options should convert to using
the new options.
Who: Vlad Yasevich <vladislav.yasevich@hp.com>
---------------------------
What: CONFIG_THERMAL_HWMON
When: January 2009
Why: This option was introduced just to allow older lm-sensors userspace
to keep working over the upgrade to 2.6.26. At the scheduled time of
removal fixed lm-sensors (2.x or 3.x) should be readily available.
Who: Rene Herman <rene.herman@gmail.com>
---------------------------
What: Code that is now under CONFIG_WIRELESS_EXT_SYSFS
(in net/core/net-sysfs.c)
When: After the only user (hal) has seen a release with the patches
for enough time, probably some time in 2010.
Why: Over 1K .text/.data size reduction, data is available in other
ways (ioctls)
Who: Johannes Berg <johannes@sipsolutions.net>
Documentation/filesystems/configfs/configfs.txt
+4 -6
View File
@@ -233,12 +233,10 @@ accomplished via the group operations specified on the group's
config_item_type.
struct configfs_group_operations {
int (*make_item)(struct config_group *group,
const char *name,
struct config_item **new_item);
int (*make_group)(struct config_group *group,
const char *name,
struct config_group **new_group);
struct config_item *(*make_item)(struct config_group *group,
const char *name);
struct config_group *(*make_group)(struct config_group *group,
const char *name);
int (*commit_item)(struct config_item *item);
void (*disconnect_notify)(struct config_group *group,
struct config_item *item);
Documentation/filesystems/configfs/configfs_example.c
+6 -8
View File
@@ -273,13 +273,13 @@ static inline struct simple_children *to_simple_children(struct config_item *ite
return item ? container_of(to_config_group(item), struct simple_children, group) : NULL;
}
static int simple_children_make_item(struct config_group *group, const char *name, struct config_item **new_item)
static struct config_item *simple_children_make_item(struct config_group *group, const char *name)
{
struct simple_child *simple_child;
simple_child = kzalloc(sizeof(struct simple_child), GFP_KERNEL);
if (!simple_child)
return -ENOMEM;
return ERR_PTR(-ENOMEM);
config_item_init_type_name(&simple_child->item, name,
@@ -287,8 +287,7 @@ static int simple_children_make_item(struct config_group *group, const char *nam
simple_child->storeme = 0;
*new_item = &simple_child->item;
return 0;
return &simple_child->item;
}
static struct configfs_attribute simple_children_attr_description = {
@@ -360,21 +359,20 @@ static struct configfs_subsystem simple_children_subsys = {
* children of its own.
*/
static int group_children_make_group(struct config_group *group, const char *name, struct config_group **new_group)
static struct config_group *group_children_make_group(struct config_group *group, const char *name)
{
struct simple_children *simple_children;
simple_children = kzalloc(sizeof(struct simple_children),
GFP_KERNEL);
if (!simple_children)
return -ENOMEM;
return ERR_PTR(-ENOMEM);
config_group_init_type_name(&simple_children->group, name,
&simple_children_type);
*new_group = &simple_children->group;
return 0;
return &simple_children->group;
}
static struct configfs_attribute group_children_attr_description = {
Documentation/filesystems/nfs-rdma.txt
+59 -44
View File
@@ -5,7 +5,7 @@
################################################################################
Author: NetApp and Open Grid Computing
Date: April 15, 2008
Date: May 29, 2008
Table of Contents
~~~~~~~~~~~~~~~~~
@@ -60,16 +60,18 @@ Installation
The procedures described in this document have been tested with
distributions from Red Hat's Fedora Project (http://fedora.redhat.com/).
- Install nfs-utils-1.1.1 or greater on the client
- Install nfs-utils-1.1.2 or greater on the client
An NFS/RDMA mount point can only be obtained by using the mount.nfs
command in nfs-utils-1.1.1 or greater. To see which version of mount.nfs
you are using, type:
An NFS/RDMA mount point can be obtained by using the mount.nfs command in
nfs-utils-1.1.2 or greater (nfs-utils-1.1.1 was the first nfs-utils
version with support for NFS/RDMA mounts, but for various reasons we
recommend using nfs-utils-1.1.2 or greater). To see which version of
mount.nfs you are using, type:
> /sbin/mount.nfs -V
$ /sbin/mount.nfs -V
If the version is less than 1.1.1 or the command does not exist,
then you will need to install the latest version of nfs-utils.
If the version is less than 1.1.2 or the command does not exist,
you should install the latest version of nfs-utils.
Download the latest package from:
@@ -77,22 +79,33 @@ Installation
Uncompress the package and follow the installation instructions.
If you will not be using GSS and NFSv4, the installation process
can be simplified by disabling these features when running configure:
If you will not need the idmapper and gssd executables (you do not need
these to create an NFS/RDMA enabled mount command), the installation
process can be simplified by disabling these features when running
configure:
> ./configure --disable-gss --disable-nfsv4
$ ./configure --disable-gss --disable-nfsv4
For more information on this see the package's README and INSTALL files.
To build nfs-utils you will need the tcp_wrappers package installed. For
more information on this see the package's README and INSTALL files.
After building the nfs-utils package, there will be a mount.nfs binary in
the utils/mount directory. This binary can be used to initiate NFS v2, v3,
or v4 mounts. To initiate a v4 mount, the binary must be called mount.nfs4.
The standard technique is to create a symlink called mount.nfs4 to mount.nfs.
or v4 mounts. To initiate a v4 mount, the binary must be called
mount.nfs4. The standard technique is to create a symlink called
mount.nfs4 to mount.nfs.
NOTE: mount.nfs and therefore nfs-utils-1.1.1 or greater is only needed
This mount.nfs binary should be installed at /sbin/mount.nfs as follows:
$ sudo cp utils/mount/mount.nfs /sbin/mount.nfs
In this location, mount.nfs will be invoked automatically for NFS mounts
by the system mount commmand.
NOTE: mount.nfs and therefore nfs-utils-1.1.2 or greater is only needed
on the NFS client machine. You do not need this specific version of
nfs-utils on the server. Furthermore, only the mount.nfs command from
nfs-utils-1.1.1 is needed on the client.
nfs-utils-1.1.2 is needed on the client.
- Install a Linux kernel with NFS/RDMA
@@ -156,8 +169,8 @@ Check RDMA and NFS Setup
this time. For example, if you are using a Mellanox Tavor/Sinai/Arbel
card:
> modprobe ib_mthca
> modprobe ib_ipoib
$ modprobe ib_mthca
$ modprobe ib_ipoib
If you are using InfiniBand, make sure there is a Subnet Manager (SM)
running on the network. If your IB switch has an embedded SM, you can
@@ -166,7 +179,7 @@ Check RDMA and NFS Setup
If an SM is running on your network, you should see the following:
> cat /sys/class/infiniband/driverX/ports/1/state
$ cat /sys/class/infiniband/driverX/ports/1/state
4: ACTIVE
where driverX is mthca0, ipath5, ehca3, etc.
@@ -174,10 +187,10 @@ Check RDMA and NFS Setup
To further test the InfiniBand software stack, use IPoIB (this
assumes you have two IB hosts named host1 and host2):
host1> ifconfig ib0 a.b.c.x
host2> ifconfig ib0 a.b.c.y
host1> ping a.b.c.y
host2> ping a.b.c.x
host1$ ifconfig ib0 a.b.c.x
host2$ ifconfig ib0 a.b.c.y
host1$ ping a.b.c.y
host2$ ping a.b.c.x
For other device types, follow the appropriate procedures.
@@ -202,11 +215,11 @@ NFS/RDMA Setup
/vol0 192.168.0.47(fsid=0,rw,async,insecure,no_root_squash)
/vol0 192.168.0.0/255.255.255.0(fsid=0,rw,async,insecure,no_root_squash)
The IP address(es) is(are) the client's IPoIB address for an InfiniBand HCA or the
cleint's iWARP address(es) for an RNIC.
The IP address(es) is(are) the client's IPoIB address for an InfiniBand
HCA or the cleint's iWARP address(es) for an RNIC.
NOTE: The "insecure" option must be used because the NFS/RDMA client does not
use a reserved port.
NOTE: The "insecure" option must be used because the NFS/RDMA client does
not use a reserved port.
Each time a machine boots:
@@ -214,43 +227,45 @@ NFS/RDMA Setup
For InfiniBand using a Mellanox adapter:
> modprobe ib_mthca
> modprobe ib_ipoib
> ifconfig ib0 a.b.c.d
$ modprobe ib_mthca
$ modprobe ib_ipoib
$ ifconfig ib0 a.b.c.d
NOTE: use unique addresses for the client and server
- Start the NFS server
If the NFS/RDMA server was built as a module (CONFIG_SUNRPC_XPRT_RDMA=m in kernel config),
load the RDMA transport module:
If the NFS/RDMA server was built as a module (CONFIG_SUNRPC_XPRT_RDMA=m in
kernel config), load the RDMA transport module:
> modprobe svcrdma
$ modprobe svcrdma
Regardless of how the server was built (module or built-in), start the server:
Regardless of how the server was built (module or built-in), start the
server:
> /etc/init.d/nfs start
$ /etc/init.d/nfs start
or
> service nfs start
$ service nfs start
Instruct the server to listen on the RDMA transport:
> echo rdma 2050 > /proc/fs/nfsd/portlist
$ echo rdma 2050 > /proc/fs/nfsd/portlist
- On the client system
If the NFS/RDMA client was built as a module (CONFIG_SUNRPC_XPRT_RDMA=m in kernel config),
load the RDMA client module:
If the NFS/RDMA client was built as a module (CONFIG_SUNRPC_XPRT_RDMA=m in
kernel config), load the RDMA client module:
> modprobe xprtrdma.ko
$ modprobe xprtrdma.ko
Regardless of how the client was built (module or built-in), issue the mount.nfs command:
Regardless of how the client was built (module or built-in), use this
command to mount the NFS/RDMA server:
> /path/to/your/mount.nfs <IPoIB-server-name-or-address>:/<export> /mnt -i -o rdma,port=2050
$ mount -o rdma,port=2050 <IPoIB-server-name-or-address>:/<export> /mnt
To verify that the mount is using RDMA, run "cat /proc/mounts" and check the
"proto" field for the given mount.
To verify that the mount is using RDMA, run "cat /proc/mounts" and check
the "proto" field for the given mount.
Congratulations! You're using NFS/RDMA!
Documentation/networking/bonding.txt
+75 -25
View File
@@ -289,35 +289,73 @@ downdelay
fail_over_mac
Specifies whether active-backup mode should set all slaves to
the same MAC address (the traditional behavior), or, when
enabled, change the bond's MAC address when changing the
active interface (i.e., fail over the MAC address itself).
the same MAC address at enslavement (the traditional
behavior), or, when enabled, perform special handling of the
bond's MAC address in accordance with the selected policy.
Fail over MAC is useful for devices that cannot ever alter
their MAC address, or for devices that refuse incoming
broadcasts with their own source MAC (which interferes with
the ARP monitor).
Possible values are:
The down side of fail over MAC is that every device on the
network must be updated via gratuitous ARP, vs. just updating
a switch or set of switches (which often takes place for any
traffic, not just ARP traffic, if the switch snoops incoming
traffic to update its tables) for the traditional method. If
the gratuitous ARP is lost, communication may be disrupted.
none or 0
When fail over MAC is used in conjuction with the mii monitor,
devices which assert link up prior to being able to actually
transmit and receive are particularly susecptible to loss of
the gratuitous ARP, and an appropriate updelay setting may be
required.
This setting disables fail_over_mac, and causes
bonding to set all slaves of an active-backup bond to
the same MAC address at enslavement time. This is the
default.
A value of 0 disables fail over MAC, and is the default. A
value of 1 enables fail over MAC. This option is enabled
automatically if the first slave added cannot change its MAC
address. This option may be modified via sysfs only when no
slaves are present in the bond.
active or 1
This option was added in bonding version 3.2.0.
The "active" fail_over_mac policy indicates that the
MAC address of the bond should always be the MAC
address of the currently active slave. The MAC
address of the slaves is not changed; instead, the MAC
address of the bond changes during a failover.
This policy is useful for devices that cannot ever
alter their MAC address, or for devices that refuse
incoming broadcasts with their own source MAC (which
interferes with the ARP monitor).
The down side of this policy is that every device on
the network must be updated via gratuitous ARP,
vs. just updating a switch or set of switches (which
often takes place for any traffic, not just ARP
traffic, if the switch snoops incoming traffic to
update its tables) for the traditional method. If the
gratuitous ARP is lost, communication may be
disrupted.
When this policy is used in conjuction with the mii
monitor, devices which assert link up prior to being
able to actually transmit and receive are particularly
susecptible to loss of the gratuitous ARP, and an
appropriate updelay setting may be required.
follow or 2
The "follow" fail_over_mac policy causes the MAC
address of the bond to be selected normally (normally
the MAC address of the first slave added to the bond).
However, the second and subsequent slaves are not set
to this MAC address while they are in a backup role; a
slave is programmed with the bond's MAC address at
failover time (and the formerly active slave receives
the newly active slave's MAC address).
This policy is useful for multiport devices that
either become confused or incur a performance penalty
when multiple ports are programmed with the same MAC
address.
The default policy is none, unless the first slave cannot
change its MAC address, in which case the active policy is
selected by default.
This option may be modified via sysfs only when no slaves are
present in the bond.
This option was added in bonding version 3.2.0. The "follow"
policy was added in bonding version 3.3.0.
lacp_rate
@@ -338,7 +376,8 @@ max_bonds
Specifies the number of bonding devices to create for this
instance of the bonding driver. E.g., if max_bonds is 3, and
the bonding driver is not already loaded, then bond0, bond1
and bond2 will be created. The default value is 1.
and bond2 will be created. The default value is 1. Specifying
a value of 0 will load bonding, but will not create any devices.
miimon
@@ -501,6 +540,17 @@ mode
swapped with the new curr_active_slave that was
chosen.
num_grat_arp
Specifies the number of gratuitous ARPs to be issued after a
failover event. One gratuitous ARP is issued immediately after
the failover, subsequent ARPs are sent at a rate of one per link
monitor interval (arp_interval or miimon, whichever is active).
The valid range is 0 - 255; the default value is 1. This option
affects only the active-backup mode. This option was added for
bonding version 3.3.0.
primary
A string (eth0, eth2, etc) specifying which slave is the
Documentation/networking/dm9000.txt
+167
View File
@@ -0,0 +1,167 @@
DM9000 Network driver
=====================
Copyright 2008 Simtec Electronics,
Ben Dooks <ben@simtec.co.uk> <ben-linux@fluff.org>
Introduction
------------
This file describes how to use the DM9000 platform-device based network driver
that is contained in the files drivers/net/dm9000.c and drivers/net/dm9000.h.
The driver supports three DM9000 variants, the DM9000E which is the first chip
supported as well as the newer DM9000A and DM9000B devices. It is currently
maintained and tested by Ben Dooks, who should be CC: to any patches for this
driver.
Defining the platform device
----------------------------
The minimum set of resources attached to the platform device are as follows:
1) The physical address of the address register
2) The physical address of the data register
3) The IRQ line the device's interrupt pin is connected to.
These resources should be specified in that order, as the ordering of the
two address regions is important (the driver expects these to be address
and then data).
An example from arch/arm/mach-s3c2410/mach-bast.c is:
static struct resource bast_dm9k_resource[] = {
[0] = {
.start = S3C2410_CS5 + BAST_PA_DM9000,
.end = S3C2410_CS5 + BAST_PA_DM9000 + 3,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = S3C2410_CS5 + BAST_PA_DM9000 + 0x40,
.end = S3C2410_CS5 + BAST_PA_DM9000 + 0x40 + 0x3f,
.flags = IORESOURCE_MEM,
},
[2] = {
.start = IRQ_DM9000,
.end = IRQ_DM9000,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
}
};
static struct platform_device bast_device_dm9k = {
.name = "dm9000",
.id = 0,
.num_resources = ARRAY_SIZE(bast_dm9k_resource),
.resource = bast_dm9k_resource,
};
Note the setting of the IRQ trigger flag in bast_dm9k_resource[2].flags,
as this will generate a warning if it is not present. The trigger from
the flags field will be passed to request_irq() when registering the IRQ
handler to ensure that the IRQ is setup correctly.
This shows a typical platform device, without the optional configuration
platform data supplied. The next example uses the same resources, but adds
the optional platform data to pass extra configuration data:
static struct dm9000_plat_data bast_dm9k_platdata = {
.flags = DM9000_PLATF_16BITONLY,
};
static struct platform_device bast_device_dm9k = {
.name = "dm9000",
.id = 0,
.num_resources = ARRAY_SIZE(bast_dm9k_resource),
.resource = bast_dm9k_resource,
.dev = {
.platform_data = &bast_dm9k_platdata,
}
};
The platform data is defined in include/linux/dm9000.h and described below.
Platform data
-------------
Extra platform data for the DM9000 can describe the IO bus width to the
device, whether or not an external PHY is attached to the device and
the availability of an external configuration EEPROM.
The flags for the platform data .flags field are as follows:
DM9000_PLATF_8BITONLY
The IO should be done with 8bit operations.
DM9000_PLATF_16BITONLY
The IO should be done with 16bit operations.
DM9000_PLATF_32BITONLY
The IO should be done with 32bit operations.
DM9000_PLATF_EXT_PHY
The chip is connected to an external PHY.
DM9000_PLATF_NO_EEPROM
This can be used to signify that the board does not have an
EEPROM, or that the EEPROM should be hidden from the user.
DM9000_PLATF_SIMPLE_PHY
Switch to using the simpler PHY polling method which does not
try and read the MII PHY state regularly. This is only available
when using the internal PHY. See the section on link state polling
for more information.
The config symbol DM9000_FORCE_SIMPLE_PHY_POLL, Kconfig entry
"Force simple NSR based PHY polling" allows this flag to be
forced on at build time.
PHY Link state polling
----------------------
The driver keeps track of the link state and informs the network core
about link (carrier) availablilty. This is managed by several methods
depending on the version of the chip and on which PHY is being used.
For the internal PHY, the original (and currently default) method is
to read the MII state, either when the status changes if we have the
necessary interrupt support in the chip or every two seconds via a
periodic timer.
To reduce the overhead for the internal PHY, there is now the option
of using the DM9000_FORCE_SIMPLE_PHY_POLL config, or DM9000_PLATF_SIMPLE_PHY
platform data option to read the summary information without the
expensive MII accesses. This method is faster, but does not print
as much information.
When using an external PHY, the driver currently has to poll the MII
link status as there is no method for getting an interrupt on link change.
DM9000A / DM9000B
-----------------
These chips are functionally similar to the DM9000E and are supported easily
by the same driver. The features are:
1) Interrupt on internal PHY state change. This means that the periodic
polling of the PHY status may be disabled on these devices when using
the internal PHY.
2) TCP/UDP checksum offloading, which the driver does not currently support.
ethtool
-------
The driver supports the ethtool interface for access to the driver
state information, the PHY state and the EEPROM.
Documentation/networking/ip-sysctl.txt
+17 -4
View File
@@ -551,8 +551,9 @@ icmp_echo_ignore_broadcasts - BOOLEAN
icmp_ratelimit - INTEGER
Limit the maximal rates for sending ICMP packets whose type matches
icmp_ratemask (see below) to specific targets.
0 to disable any limiting, otherwise the maximal rate in jiffies(1)
Default: 100
0 to disable any limiting,
otherwise the minimal space between responses in milliseconds.
Default: 1000
icmp_ratemask - INTEGER
Mask made of ICMP types for which rates are being limited.
@@ -1023,11 +1024,23 @@ max_addresses - INTEGER
autoconfigured addresses.
Default: 16
disable_ipv6 - BOOLEAN
Disable IPv6 operation.
Default: FALSE (enable IPv6 operation)
accept_dad - INTEGER
Whether to accept DAD (Duplicate Address Detection).
0: Disable DAD
1: Enable DAD (default)
2: Enable DAD, and disable IPv6 operation if MAC-based duplicate
link-local address has been found.
icmp/*:
ratelimit - INTEGER
Limit the maximal rates for sending ICMPv6 packets.
0 to disable any limiting, otherwise the maximal rate in jiffies(1)
Default: 100
0 to disable any limiting,
otherwise the minimal space between responses in milliseconds.
Default: 1000
IPv6 Update by:
Documentation/networking/ixgb.txt
+284 -63
View File
@@ -1,7 +1,7 @@
Linux* Base Driver for the Intel(R) PRO/10GbE Family of Adapters
================================================================
Linux Base Driver for 10 Gigabit Intel(R) Network Connection
=============================================================
November 17, 2004
October 9, 2007
Contents
@@ -9,65 +9,122 @@ Contents
- In This Release
- Identifying Your Adapter
- Building and Installation
- Command Line Parameters
- Improving Performance
- Additional Configurations
- Known Issues/Troubleshooting
- Support
In This Release
===============
This file describes the Linux* Base Driver for the Intel(R) PRO/10GbE Family
of Adapters, version 1.0.x.
This file describes the ixgb Linux Base Driver for the 10 Gigabit Intel(R)
Network Connection. This driver includes support for Itanium(R)2-based
systems.
For questions related to hardware requirements, refer to the documentation
supplied with your Intel PRO/10GbE adapter. All hardware requirements listed
apply to use with Linux.
supplied with your 10 Gigabit adapter. All hardware requirements listed apply
to use with Linux.
The following features are available in this kernel:
- Native VLANs
- Channel Bonding (teaming)
- SNMP
Channel Bonding documentation can be found in the Linux kernel source:
/Documentation/networking/bonding.txt
The driver information previously displayed in the /proc filesystem is not
supported in this release. Alternatively, you can use ethtool (version 1.6
or later), lspci, and ifconfig to obtain the same information.
Instructions on updating ethtool can be found in the section "Additional
Configurations" later in this document.
Identifying Your Adapter
========================
To verify your Intel adapter is supported, find the board ID number on the
adapter. Look for a label that has a barcode and a number in the format
A12345-001.
The following Intel network adapters are compatible with the drivers in this
release:
Use the above information and the Adapter & Driver ID Guide at:
Controller Adapter Name Physical Layer
---------- ------------ --------------
82597EX Intel(R) PRO/10GbE LR/SR/CX4 10G Base-LR (1310 nm optical fiber)
Server Adapters 10G Base-SR (850 nm optical fiber)
10G Base-CX4(twin-axial copper cabling)
http://support.intel.com/support/network/adapter/pro100/21397.htm
For more information on how to identify your adapter, go to the Adapter &
Driver ID Guide at:
For the latest Intel network drivers for Linux, go to:
http://support.intel.com/support/network/sb/CS-012904.htm
Building and Installation
=========================
select m for "Intel(R) PRO/10GbE support" located at:
Location:
-> Device Drivers
-> Network device support (NETDEVICES [=y])
-> Ethernet (10000 Mbit) (NETDEV_10000 [=y])
1. make modules && make modules_install
2. Load the module:
    modprobe ixgb <parameter>=<value>
The insmod command can be used if the full
path to the driver module is specified. For example:
insmod /lib/modules/<KERNEL VERSION>/kernel/drivers/net/ixgb/ixgb.ko
With 2.6 based kernels also make sure that older ixgb drivers are
removed from the kernel, before loading the new module:
rmmod ixgb; modprobe ixgb
3. Assign an IP address to the interface by entering the following, where
x is the interface number:
ifconfig ethx <IP_address>
4. Verify that the interface works. Enter the following, where <IP_address>
is the IP address for another machine on the same subnet as the interface
that is being tested:
ping <IP_address>
http://downloadfinder.intel.com/scripts-df/support_intel.asp
Command Line Parameters
=======================
If the driver is built as a module, the following optional parameters are
used by entering them on the command line with the modprobe or insmod command
using this syntax:
used by entering them on the command line with the modprobe command using
this syntax:
modprobe ixgb [<option>=<VAL1>,<VAL2>,...]
insmod ixgb [<option>=<VAL1>,<VAL2>,...]
For example, with two 10GbE PCI adapters, entering:
For example, with two PRO/10GbE PCI adapters, entering:
insmod ixgb TxDescriptors=80,128
modprobe ixgb TxDescriptors=80,128
loads the ixgb driver with 80 TX resources for the first adapter and 128 TX
resources for the second adapter.
The default value for each parameter is generally the recommended setting,
unless otherwise noted. Also, if the driver is statically built into the
kernel, the driver is loaded with the default values for all the parameters.
Ethtool can be used to change some of the parameters at runtime.
unless otherwise noted.
FlowControl
Valid Range: 0-3 (0=none, 1=Rx only, 2=Tx only, 3=Rx&Tx)
Default: Read from the EEPROM
If EEPROM is not detected, default is 3
If EEPROM is not detected, default is 1
This parameter controls the automatic generation(Tx) and response(Rx) to
Ethernet PAUSE frames.
Ethernet PAUSE frames. There are hardware bugs associated with enabling
Tx flow control so beware.
RxDescriptors
Valid Range: 64-512
@@ -83,7 +140,7 @@ Default Value: 512
RxIntDelay
Valid Range: 0-65535 (0=off)
Default Value: 6
Default Value: 72
This value delays the generation of receive interrupts in units of
0.8192 microseconds. Receive interrupt reduction can improve CPU
efficiency if properly tuned for specific network traffic. Increasing
@@ -105,25 +162,19 @@ Default Value: 1
A value of '1' indicates that the driver should enable IP checksum
offload for received packets (both UDP and TCP) to the adapter hardware.
XsumTX
Valid Range: 0-1
Default Value: 1
A value of '1' indicates that the driver should enable IP checksum
offload for transmitted packets (both UDP and TCP) to the adapter
hardware.
Improving Performance
=====================
With the Intel PRO/10 GbE adapter, the default Linux configuration will very
likely limit the total available throughput artificially. There is a set of
things that when applied together increase the ability of Linux to transmit
and receive data. The following enhancements were originally acquired from
settings published at http://www.spec.org/web99 for various submitted results
using Linux.
With the 10 Gigabit server adapters, the default Linux configuration will
very likely limit the total available throughput artificially. There is a set
of configuration changes that, when applied together, will increase the ability
of Linux to transmit and receive data. The following enhancements were
originally acquired from settings published at http://www.spec.org/web99/ for
various submitted results using Linux.
NOTE: These changes are only suggestions, and serve as a starting point for
tuning your network performance.
tuning your network performance.
The changes are made in three major ways, listed in order of greatest effect:
- Use ifconfig to modify the mtu (maximum transmission unit) and the txqueuelen
@@ -134,17 +185,21 @@ The changes are made in three major ways, listed in order of greatest effect:
NOTE: setpci modifies the adapter's configuration registers to allow it to read
up to 4k bytes at a time (for transmits). However, for some systems the
behavior after modifying this register may be undefined (possibly errors of some
kind). A power-cycle, hard reset or explicitly setting the e6 register back to
22 (setpci -d 8086:1048 e6.b=22) may be required to get back to a stable
configuration.
behavior after modifying this register may be undefined (possibly errors of
some kind). A power-cycle, hard reset or explicitly setting the e6 register
back to 22 (setpci -d 8086:1a48 e6.b=22) may be required to get back to a
stable configuration.
- COPY these lines and paste them into ixgb_perf.sh:
#!/bin/bash
echo "configuring network performance , edit this file to change the interface"
echo "configuring network performance , edit this file to change the interface
or device ID of 10GbE card"
# set mmrbc to 4k reads, modify only Intel 10GbE device IDs
setpci -d 8086:1048 e6.b=2e
# set the MTU (max transmission unit) - it requires your switch and clients to change too!
# replace 1a48 with appropriate 10GbE device's ID installed on the system,
# if needed.
setpci -d 8086:1a48 e6.b=2e
# set the MTU (max transmission unit) - it requires your switch and clients
# to change as well.
# set the txqueuelen
# your ixgb adapter should be loaded as eth1 for this to work, change if needed
ifconfig eth1 mtu 9000 txqueuelen 1000 up
@@ -159,32 +214,43 @@ sysctl -p ./sysctl_ixgb.conf
# several network benchmark tests, your mileage may vary
### IPV4 specific settings
net.ipv4.tcp_timestamps = 0 # turns TCP timestamp support off, default 1, reduces CPU use
net.ipv4.tcp_sack = 0 # turn SACK support off, default on
# turn TCP timestamp support off, default 1, reduces CPU use
net.ipv4.tcp_timestamps = 0
# turn SACK support off, default on
# on systems with a VERY fast bus -> memory interface this is the big gainer
net.ipv4.tcp_rmem = 10000000 10000000 10000000 # sets min/default/max TCP read buffer, default 4096 87380 174760
net.ipv4.tcp_wmem = 10000000 10000000 10000000 # sets min/pressure/max TCP write buffer, default 4096 16384 131072
net.ipv4.tcp_mem = 10000000 10000000 10000000 # sets min/pressure/max TCP buffer space, default 31744 32256 32768
net.ipv4.tcp_sack = 0
# set min/default/max TCP read buffer, default 4096 87380 174760
net.ipv4.tcp_rmem = 10000000 10000000 10000000
# set min/pressure/max TCP write buffer, default 4096 16384 131072
net.ipv4.tcp_wmem = 10000000 10000000 10000000
# set min/pressure/max TCP buffer space, default 31744 32256 32768
net.ipv4.tcp_mem = 10000000 10000000 10000000
### CORE settings (mostly for socket and UDP effect)
net.core.rmem_max = 524287 # maximum receive socket buffer size, default 131071
net.core.wmem_max = 524287 # maximum send socket buffer size, default 131071
net.core.rmem_default = 524287 # default receive socket buffer size, default 65535
net.core.wmem_default = 524287 # default send socket buffer size, default 65535
net.core.optmem_max = 524287 # maximum amount of option memory buffers, default 10240
net.core.netdev_max_backlog = 300000 # number of unprocessed input packets before kernel starts dropping them, default 300
# set maximum receive socket buffer size, default 131071
net.core.rmem_max = 524287
# set maximum send socket buffer size, default 131071
net.core.wmem_max = 524287
# set default receive socket buffer size, default 65535
net.core.rmem_default = 524287
# set default send socket buffer size, default 65535
net.core.wmem_default = 524287
# set maximum amount of option memory buffers, default 10240
net.core.optmem_max = 524287
# set number of unprocessed input packets before kernel starts dropping them; default 300
net.core.netdev_max_backlog = 300000
- END sysctl_ixgb.conf
Edit the ixgb_perf.sh script if necessary to change eth1 to whatever interface
your ixgb driver is using.
your ixgb driver is using and/or replace '1a48' with appropriate 10GbE device's
ID installed on the system.
NOTE: Unless these scripts are added to the boot process, these changes will
only last only until the next system reboot.
only last only until the next system reboot.
Resolving Slow UDP Traffic
--------------------------
If your server does not seem to be able to receive UDP traffic as fast as it
can receive TCP traffic, it could be because Linux, by default, does not set
the network stack buffers as large as they need to be to support high UDP
@@ -200,13 +266,168 @@ defaults of max=131071 (128k - 1) and default=65535 (64k - 1). These variables
will increase the amount of memory used by the network stack for receives, and
can be increased significantly more if necessary for your application.
Additional Configurations
=========================
Configuring the Driver on Different Distributions
-------------------------------------------------
Configuring a network driver to load properly when the system is started is
distribution dependent. Typically, the configuration process involves adding
an alias line to /etc/modprobe.conf as well as editing other system startup
scripts and/or configuration files. Many popular Linux distributions ship
with tools to make these changes for you. To learn the proper way to
configure a network device for your system, refer to your distribution
documentation. If during this process you are asked for the driver or module
name, the name for the Linux Base Driver for the Intel 10GbE Family of
Adapters is ixgb.
Viewing Link Messages
---------------------
Link messages will not be displayed to the console if the distribution is
restricting system messages. In order to see network driver link messages on
your console, set dmesg to eight by entering the following:
dmesg -n 8
NOTE: This setting is not saved across reboots.
Jumbo Frames
------------
The driver supports Jumbo Frames for all adapters. Jumbo Frames support is
enabled by changing the MTU to a value larger than the default of 1500.
The maximum value for the MTU is 16114. Use the ifconfig command to
increase the MTU size. For example:
ifconfig ethx mtu 9000 up
The maximum MTU setting for Jumbo Frames is 16114. This value coincides
with the maximum Jumbo Frames size of 16128.
Ethtool
-------
The driver utilizes the ethtool interface for driver configuration and
diagnostics, as well as displaying statistical information. Ethtool
version 1.6 or later is required for this functionality.
The latest release of ethtool can be found from
http://sourceforge.net/projects/gkernel
NOTE: Ethtool 1.6 only supports a limited set of ethtool options. Support
for a more complete ethtool feature set can be enabled by upgrading
to the latest version.
NAPI
----
NAPI (Rx polling mode) is supported in the ixgb driver. NAPI is enabled
or disabled based on the configuration of the kernel. see CONFIG_IXGB_NAPI
See www.cyberus.ca/~hadi/usenix-paper.tgz for more information on NAPI.
Known Issues/Troubleshooting
============================
NOTE: After installing the driver, if your Intel Network Connection is not
working, verify in the "In This Release" section of the readme that you have
installed the correct driver.
Intel(R) PRO/10GbE CX4 Server Adapter Cable Interoperability Issue with
Fujitsu XENPAK Module in SmartBits Chassis
---------------------------------------------------------------------
Excessive CRC errors may be observed if the Intel(R) PRO/10GbE CX4
Server adapter is connected to a Fujitsu XENPAK CX4 module in a SmartBits
chassis using 15 m/24AWG cable assemblies manufactured by Fujitsu or Leoni.
The CRC errors may be received either by the Intel(R) PRO/10GbE CX4
Server adapter or the SmartBits. If this situation occurs using a different
cable assembly may resolve the issue.
CX4 Server Adapter Cable Interoperability Issues with HP Procurve 3400cl
Switch Port
------------------------------------------------------------------------
Excessive CRC errors may be observed if the Intel(R) PRO/10GbE CX4 Server
adapter is connected to an HP Procurve 3400cl switch port using short cables
(1 m or shorter). If this situation occurs, using a longer cable may resolve
the issue.
Excessive CRC errors may be observed using Fujitsu 24AWG cable assemblies that
Are 10 m or longer or where using a Leoni 15 m/24AWG cable assembly. The CRC
errors may be received either by the CX4 Server adapter or at the switch. If
this situation occurs, using a different cable assembly may resolve the issue.
Jumbo Frames System Requirement
-------------------------------
Memory allocation failures have been observed on Linux systems with 64 MB
of RAM or less that are running Jumbo Frames. If you are using Jumbo
Frames, your system may require more than the advertised minimum
requirement of 64 MB of system memory.
Performance Degradation with Jumbo Frames
-----------------------------------------
Degradation in throughput performance may be observed in some Jumbo frames
environments. If this is observed, increasing the application's socket buffer
size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values may help.
See the specific application manual and /usr/src/linux*/Documentation/
networking/ip-sysctl.txt for more details.
Allocating Rx Buffers when Using Jumbo Frames
---------------------------------------------
Allocating Rx buffers when using Jumbo Frames on 2.6.x kernels may fail if
the available memory is heavily fragmented. This issue may be seen with PCI-X
adapters or with packet split disabled. This can be reduced or eliminated
by changing the amount of available memory for receive buffer allocation, by
increasing /proc/sys/vm/min_free_kbytes.
Multiple Interfaces on Same Ethernet Broadcast Network
------------------------------------------------------
Due to the default ARP behavior on Linux, it is not possible to have
one system on two IP networks in the same Ethernet broadcast domain
(non-partitioned switch) behave as expected. All Ethernet interfaces
will respond to IP traffic for any IP address assigned to the system.
This results in unbalanced receive traffic.
If you have multiple interfaces in a server, do either of the following:
- Turn on ARP filtering by entering:
echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter
- Install the interfaces in separate broadcast domains - either in
different switches or in a switch partitioned to VLANs.
UDP Stress Test Dropped Packet Issue
--------------------------------------
Under small packets UDP stress test with 10GbE driver, the Linux system
may drop UDP packets due to the fullness of socket buffers. You may want
to change the driver's Flow Control variables to the minimum value for
controlling packet reception.
Tx Hangs Possible Under Stress
------------------------------
Under stress conditions, if TX hangs occur, turning off TSO
"ethtool -K eth0 tso off" may resolve the problem.
Support
=======
For general information and support, go to the Intel support website at:
For general information, go to the Intel support website at:
http://support.intel.com
or the Intel Wired Networking project hosted by Sourceforge at:
http://sourceforge.net/projects/e1000
If an issue is identified with the released source code on the supported
kernel with a supported adapter, email the specific information related to
the issue to linux.nics@intel.com.
kernel with a supported adapter, email the specific information related
to the issue to e1000-devel@lists.sf.net
Documentation/networking/mac80211_hwsim/README
+67
View File
@@ -0,0 +1,67 @@
mac80211_hwsim - software simulator of 802.11 radio(s) for mac80211
Copyright (c) 2008, Jouni Malinen <j@w1.fi>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License version 2 as
published by the Free Software Foundation.
Introduction
mac80211_hwsim is a Linux kernel module that can be used to simulate
arbitrary number of IEEE 802.11 radios for mac80211. It can be used to
test most of the mac80211 functionality and user space tools (e.g.,
hostapd and wpa_supplicant) in a way that matches very closely with
the normal case of using real WLAN hardware. From the mac80211 view
point, mac80211_hwsim is yet another hardware driver, i.e., no changes
to mac80211 are needed to use this testing tool.
The main goal for mac80211_hwsim is to make it easier for developers
to test their code and work with new features to mac80211, hostapd,
and wpa_supplicant. The simulated radios do not have the limitations
of real hardware, so it is easy to generate an arbitrary test setup
and always reproduce the same setup for future tests. In addition,
since all radio operation is simulated, any channel can be used in
tests regardless of regulatory rules.
mac80211_hwsim kernel module has a parameter 'radios' that can be used
to select how many radios are simulated (default 2). This allows
configuration of both very simply setups (e.g., just a single access
point and a station) or large scale tests (multiple access points with
hundreds of stations).
mac80211_hwsim works by tracking the current channel of each virtual
radio and copying all transmitted frames to all other radios that are
currently enabled and on the same channel as the transmitting
radio. Software encryption in mac80211 is used so that the frames are
actually encrypted over the virtual air interface to allow more
complete testing of encryption.
A global monitoring netdev, hwsim#, is created independent of
mac80211. This interface can be used to monitor all transmitted frames
regardless of channel.
Simple example
This example shows how to use mac80211_hwsim to simulate two radios:
one to act as an access point and the other as a station that
associates with the AP. hostapd and wpa_supplicant are used to take
care of WPA2-PSK authentication. In addition, hostapd is also
processing access point side of association.
Please note that the current Linux kernel does not enable AP mode, so a
simple patch is needed to enable AP mode selection:
http://johannes.sipsolutions.net/patches/kernel/all/LATEST/006-allow-ap-vlan-modes.patch
# Build mac80211_hwsim as part of kernel configuration
# Load the module
modprobe mac80211_hwsim
# Run hostapd (AP) for wlan0
hostapd hostapd.conf
# Run wpa_supplicant (station) for wlan1
wpa_supplicant -Dwext -iwlan1 -c wpa_supplicant.conf
Documentation/networking/mac80211_hwsim/hostapd.conf
+11
View File
@@ -0,0 +1,11 @@
interface=wlan0
driver=nl80211
hw_mode=g
channel=1
ssid=mac80211 test
wpa=2
wpa_key_mgmt=WPA-PSK
wpa_pairwise=CCMP
wpa_passphrase=12345678
Documentation/networking/mac80211_hwsim/wpa_supplicant.conf
+10
View File
@@ -0,0 +1,10 @@
ctrl_interface=/var/run/wpa_supplicant
network={
ssid="mac80211 test"
psk="12345678"
key_mgmt=WPA-PSK
proto=WPA2
pairwise=CCMP
group=CCMP
}
Documentation/networking/multiqueue.txt
+1 -89
View File
@@ -3,19 +3,11 @@
===========================================
Section 1: Base driver requirements for implementing multiqueue support
Section 2: Qdisc support for multiqueue devices
Section 3: Brief howto using PRIO or RR for multiqueue devices
Intro: Kernel support for multiqueue devices
---------------------------------------------------------
Kernel support for multiqueue devices is only an API that is presented to the
netdevice layer for base drivers to implement. This feature is part of the
core networking stack, and all network devices will be running on the
multiqueue-aware stack. If a base driver only has one queue, then these
changes are transparent to that driver.
Kernel support for multiqueue devices is always present.
Section 1: Base driver requirements for implementing multiqueue support
-----------------------------------------------------------------------
@@ -32,84 +24,4 @@ netif_{start|stop|wake}_subqueue() functions to manage each queue while the
device is still operational. netdev->queue_lock is still used when the device
comes online or when it's completely shut down (unregister_netdev(), etc.).
Finally, the base driver should indicate that it is a multiqueue device. The
feature flag NETIF_F_MULTI_QUEUE should be added to the netdev->features
bitmap on device initialization. Below is an example from e1000:
#ifdef CONFIG_E1000_MQ
if ( (adapter->hw.mac.type == e1000_82571) ||
(adapter->hw.mac.type == e1000_82572) ||
(adapter->hw.mac.type == e1000_80003es2lan))
netdev->features |= NETIF_F_MULTI_QUEUE;
#endif
Section 2: Qdisc support for multiqueue devices
-----------------------------------------------
Currently two qdiscs support multiqueue devices. A new round-robin qdisc,
sch_rr, and sch_prio. The qdisc is responsible for classifying the skb's to
bands and queues, and will store the queue mapping into skb->queue_mapping.
Use this field in the base driver to determine which queue to send the skb
to.
sch_rr has been added for hardware that doesn't want scheduling policies from
software, so it's a straight round-robin qdisc. It uses the same syntax and
classification priomap that sch_prio uses, so it should be intuitive to
configure for people who've used sch_prio.
In order to utilitize the multiqueue features of the qdiscs, the network
device layer needs to enable multiple queue support. This can be done by
selecting NETDEVICES_MULTIQUEUE under Drivers.
The PRIO qdisc naturally plugs into a multiqueue device. If
NETDEVICES_MULTIQUEUE is selected, then on qdisc load, the number of
bands requested is compared to the number of queues on the hardware. If they
are equal, it sets a one-to-one mapping up between the queues and bands. If
they're not equal, it will not load the qdisc. This is the same behavior
for RR. Once the association is made, any skb that is classified will have
skb->queue_mapping set, which will allow the driver to properly queue skb's
to multiple queues.
Section 3: Brief howto using PRIO and RR for multiqueue devices
---------------------------------------------------------------
The userspace command 'tc,' part of the iproute2 package, is used to configure
qdiscs. To add the PRIO qdisc to your network device, assuming the device is
called eth0, run the following command:
# tc qdisc add dev eth0 root handle 1: prio bands 4 multiqueue
This will create 4 bands, 0 being highest priority, and associate those bands
to the queues on your NIC. Assuming eth0 has 4 Tx queues, the band mapping
would look like:
band 0 => queue 0
band 1 => queue 1
band 2 => queue 2
band 3 => queue 3
Traffic will begin flowing through each queue if your TOS values are assigning
traffic across the various bands. For example, ssh traffic will always try to
go out band 0 based on TOS -> Linux priority conversion (realtime traffic),
so it will be sent out queue 0. ICMP traffic (pings) fall into the "normal"
traffic classification, which is band 1. Therefore pings will be send out
queue 1 on the NIC.
Note the use of the multiqueue keyword. This is only in versions of iproute2
that support multiqueue networking devices; if this is omitted when loading
a qdisc onto a multiqueue device, the qdisc will load and operate the same
if it were loaded onto a single-queue device (i.e. - sends all traffic to
queue 0).
Another alternative to multiqueue band allocation can be done by using the
multiqueue option and specify 0 bands. If this is the case, the qdisc will
allocate the number of bands to equal the number of queues that the device
reports, and bring the qdisc online.
The behavior of tc filters remains the same, where it will override TOS priority
classification.
Author: Peter P. Waskiewicz Jr. <peter.p.waskiewicz.jr@intel.com>
Documentation/networking/s2io.txt
+2 -5
View File
@@ -52,13 +52,10 @@ d. MSI/MSI-X. Can be enabled on platforms which support this feature
(IA64, Xeon) resulting in noticeable performance improvement(upto 7%
on certain platforms).
e. NAPI. Compile-time option(CONFIG_S2IO_NAPI) for better Rx interrupt
moderation.
f. Statistics. Comprehensive MAC-level and software statistics displayed
e. Statistics. Comprehensive MAC-level and software statistics displayed
using "ethtool -S" option.
g. Multi-FIFO/Ring. Supports up to 8 transmit queues and receive rings,
f. Multi-FIFO/Ring. Supports up to 8 transmit queues and receive rings,
with multiple steering options.
4. Command line parameters
Documentation/powerpc/booting-without-of.txt
+72 -6
View File
@@ -41,12 +41,24 @@ Table of Contents
VI - System-on-a-chip devices and nodes
1) Defining child nodes of an SOC
2) Representing devices without a current OF specification
a) PHY nodes
b) Interrupt controllers
c) CFI or JEDEC memory-mapped NOR flash
d) 4xx/Axon EMAC ethernet nodes
e) Xilinx IP cores
f) USB EHCI controllers
a) MDIO IO device
b) Gianfar-compatible ethernet nodes
c) PHY nodes
d) Interrupt controllers
e) I2C
f) Freescale SOC USB controllers
g) Freescale SOC SEC Security Engines
h) Board Control and Status (BCSR)
i) Freescale QUICC Engine module (QE)
j) CFI or JEDEC memory-mapped NOR flash
k) Global Utilities Block
l) Freescale Communications Processor Module
m) Chipselect/Local Bus
n) 4xx/Axon EMAC ethernet nodes
o) Xilinx IP cores
p) Freescale Synchronous Serial Interface
q) USB EHCI controllers
r) MDIO on GPIOs
VII - Marvell Discovery mv64[345]6x System Controller chips
1) The /system-controller node
@@ -1815,6 +1827,60 @@ platforms are moved over to use the flattened-device-tree model.
big-endian;
};
r) Freescale Display Interface Unit
The Freescale DIU is a LCD controller, with proper hardware, it can also
drive DVI monitors.
Required properties:
- compatible : should be "fsl-diu".
- reg : should contain at least address and length of the DIU register
set.
- Interrupts : one DIU interrupt should be describe here.
Example (MPC8610HPCD)
display@2c000 {
compatible = "fsl,diu";
reg = <0x2c000 100>;
interrupts = <72 2>;
interrupt-parent = <&mpic>;
};
s) Freescale on board FPGA
This is the memory-mapped registers for on board FPGA.
Required properities:
- compatible : should be "fsl,fpga-pixis".
- reg : should contain the address and the lenght of the FPPGA register
set.
Example (MPC8610HPCD)
board-control@e8000000 {
compatible = "fsl,fpga-pixis";
reg = <0xe8000000 32>;
};
r) MDIO on GPIOs
Currently defined compatibles:
- virtual,gpio-mdio
MDC and MDIO lines connected to GPIO controllers are listed in the
gpios property as described in section VIII.1 in the following order:
MDC, MDIO.
Example:
mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = <&qe_pio_a 11
&qe_pio_c 6>;
};
VII - Marvell Discovery mv64[345]6x System Controller chips
===========================================================
Documentation/rfkill.txt
+494 -55
View File
File diff suppressed because it is too large Load Diff
Documentation/serial/driver
+11
View File
@@ -186,6 +186,17 @@ hardware.
Locking: port_sem taken.
Interrupts: caller dependent.
flush_buffer(port)
Flush any write buffers, reset any DMA state and stop any
ongoing DMA transfers.
This will be called whenever the port->info->xmit circular
buffer is cleared.
Locking: port->lock taken.
Interrupts: locally disabled.
This call must not sleep
set_termios(port,termios,oldtermios)
Change the port parameters, including word length, parity, stop
bits. Update read_status_mask and ignore_status_mask to indicate
Documentation/video4linux/CARDLIST.cx23885
+1
View File
@@ -8,3 +8,4 @@
7 -> Hauppauge WinTV-HVR1200 [0070:71d1,0070:71d3]
8 -> Hauppauge WinTV-HVR1700 [0070:8101]
9 -> Hauppauge WinTV-HVR1400 [0070:8010]
10 -> DViCO FusionHDTV7 Dual Express [18ac:d618]
Documentation/video4linux/CARDLIST.em28xx
+4 -1
View File
@@ -8,10 +8,13 @@
7 -> Leadtek Winfast USB II (em2800)
8 -> Kworld USB2800 (em2800)
9 -> Pinnacle Dazzle DVC 90/DVC 100 (em2820/em2840) [2304:0207,2304:021a]
10 -> Hauppauge WinTV HVR 900 (em2880) [2040:6500,2040:6502]
10 -> Hauppauge WinTV HVR 900 (em2880) [2040:6500]
11 -> Terratec Hybrid XS (em2880) [0ccd:0042]
12 -> Kworld PVR TV 2800 RF (em2820/em2840)
13 -> Terratec Prodigy XS (em2880) [0ccd:0047]
14 -> Pixelview Prolink PlayTV USB 2.0 (em2820/em2840)
15 -> V-Gear PocketTV (em2800)
16 -> Hauppauge WinTV HVR 950 (em2880) [2040:6513,2040:6517,2040:651b,2040:651f]
17 -> Pinnacle PCTV HD Pro Stick (em2880) [2304:0227]
18 -> Hauppauge WinTV HVR 900 (R2) (em2880) [2040:6502]
19 -> PointNix Intra-Oral Camera (em2860)
Documentation/video4linux/CARDLIST.saa7134
+6 -2
View File
@@ -37,7 +37,7 @@
36 -> UPMOST PURPLE TV [12ab:0800]
37 -> Items MuchTV Plus / IT-005
38 -> Terratec Cinergy 200 TV [153b:1152]
39 -> LifeView FlyTV Platinum Mini [5168:0212,4e42:0212]
39 -> LifeView FlyTV Platinum Mini [5168:0212,4e42:0212,5169:1502]
40 -> Compro VideoMate TV PVR/FM [185b:c100]
41 -> Compro VideoMate TV Gold+ [185b:c100]
42 -> Sabrent SBT-TVFM (saa7130)
@@ -128,7 +128,7 @@
127 -> Beholder BeholdTV 507 FM/RDS / BeholdTV 509 FM [0000:5071,0000:507B,5ace:5070,5ace:5090]
128 -> Beholder BeholdTV Columbus TVFM [0000:5201]
129 -> Beholder BeholdTV 607 / BeholdTV 609 [5ace:6070,5ace:6071,5ace:6072,5ace:6073,5ace:6090,5ace:6091,5ace:6092,5ace:6093]
130 -> Beholder BeholdTV M6 / BeholdTV M6 Extra [5ace:6190,5ace:6193,5ace:6191]
130 -> Beholder BeholdTV M6 [5ace:6190]
131 -> Twinhan Hybrid DTV-DVB 3056 PCI [1822:0022]
132 -> Genius TVGO AM11MCE
133 -> NXP Snake DVB-S reference design
@@ -141,3 +141,7 @@
140 -> Avermedia DVB-S Pro A700 [1461:a7a1]
141 -> Avermedia DVB-S Hybrid+FM A700 [1461:a7a2]
142 -> Beholder BeholdTV H6 [5ace:6290]
143 -> Beholder BeholdTV M63 [5ace:6191]
144 -> Beholder BeholdTV M6 Extra [5ace:6193]
145 -> AVerMedia MiniPCI DVB-T Hybrid M103 [1461:f636]
146 -> ASUSTeK P7131 Analog
Documentation/video4linux/cx18.txt
+15 -21
View File
@@ -1,36 +1,30 @@
Some notes regarding the cx18 driver for the Conexant CX23418 MPEG
encoder chip:
1) The only hardware currently supported is the Hauppauge HVR-1600
card and the Compro VideoMate H900 (note that this card only
supports analog input, it has no digital tuner!).
1) Currently supported are:
2) Some people have problems getting the i2c bus to work. Cause unknown.
- Hauppauge HVR-1600
- Compro VideoMate H900
- Yuan MPC718
- Conexant Raptor PAL/SECAM devkit
2) Some people have problems getting the i2c bus to work.
The symptom is that the eeprom cannot be read and the card is
unusable.
unusable. This is probably fixed, but if you have problems
then post to the video4linux or ivtv-users mailinglist.
3) The audio from the analog tuner is mono only. Probably caused by
incorrect audio register information in the datasheet. We are
waiting for updated information from Conexant.
3) VBI (raw or sliced) has not yet been implemented.
4) VBI (raw or sliced) has not yet been implemented.
4) MPEG indexing is not yet implemented.
5) MPEG indexing is not yet implemented.
6) The driver is still a bit rough around the edges, this should
5) The driver is still a bit rough around the edges, this should
improve over time.
Firmware:
The firmware needs to be extracted from the Windows Hauppauge HVR-1600
driver, available here:
You can obtain the firmware files here:
http://hauppauge.lightpath.net/software/install_cd/hauppauge_cd_3.4d1.zip
http://dl.ivtvdriver.org/ivtv/firmware/cx18-firmware.tar.gz
Unzip, then copy the following files to the firmware directory
and rename them as follows:
Drivers/Driver18/hcw18apu.rom -> v4l-cx23418-apu.fw
Drivers/Driver18/hcw18enc.rom -> v4l-cx23418-cpu.fw
Drivers/Driver18/hcw18mlC.rom -> v4l-cx23418-dig.fw
Untar and copy the .fw files to your firmware directory.

Some files were not shown because too many files have changed in this diff Show More