Merge tag 'pinctrl-v3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pinctrl updates from Linus Walleij:
 "This is the bulk pin control changes for the v3.17 merge development
  cycle:

   - get rid of the .disable() callback from the driver callback vtable.

     This callback was abused and counterintuitive since a pin or group
     of pins can be said to always be in some setting, and never really
     disabled.  We now only enable a certain muxing, and move between
     some certain muxings, we never "disable" a mux setting

   - some janitorial moving the MSM, Samsung and Nomadik and drivers to
     their own subdirectories for a clearer view in the subsystem.  This
     will continue

   - kill off the use of the return value from gpiochip_remove(), this
     will be done in parallel in the GPIO subsystem and hopefully not
     trigger too many unchecked return value warnings before we get rid
     of this altogether

   - a huge set of changes and improvements to the Allwinner sunxi
     drivers especially for their latest A23 and A31 SoCs, and some
     ground work for the new sun8i platform family

   - a large set of Rockchip driver improvements adding support for the
     RK3288 SoC

   - advances in migration of older Freescale platforms to pin control,
     especially i.MX1

   - Samsung and Exynos improvements

   - support for the Qualcomm MSM8960 SoC

   - use the gpiolib irqchip helpers for the ST SPEAr and Intel Baytrail
     drivers

   - a bunch of nice janitorial work done with cppcheck"

* tag 'pinctrl-v3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (61 commits)
  pinctrl: baytrail: Convert to use gpiolib irqchip
  pinctrl: sunxi: number gpio ranges starting from 0
  pinctrl: sunxi: use gpiolib API to mark a GPIO used as an IRQ
  pinctrl: rockchip: add drive-strength control for rk3288
  pinctrl: rockchip: add separate type for rk3288
  pinctrl: rockchip: set is_generic in pinconf_ops
  pinctrl: msm: drop negativity check on unsigned value
  pinctrl: remove all usage of gpio_remove ret val in driver/pinctl
  pinctrl: qcom: Make muxing of gpio function explicit
  pinctrl: nomadik: move all Nomadik drivers to subdir
  pinctrl: samsung: Group all drivers in a sub-dir
  sh-pfc: sh73a0: Introduce the use of devm_regulator_register
  sh-pfc: Add renesas,pfc-r8a7791 to binding documentation
  pinctrl: msm: move all qualcomm drivers to subdir
  pinctrl: msm: Add msm8960 definitions
  pinctrl: samsung: Allow pin value to be initialized using pinfunc
  pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes
  pinctrl: exynos: Consolidate irq_chips of GPIO and WKUP EINTs
  pinctrl: samsung: Handle GPIO request and free using pinctrl helpers
  pinctrl: samsung: Decouple direction setting from pinctrl
  ...

Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt

@@ -13,6 +13,8 @@ Required properties:
   "allwinner,sun6i-a31-pinctrl"
   "allwinner,sun6i-a31-r-pinctrl"
   "allwinner,sun7i-a20-pinctrl"
+  "allwinner,sun8i-a23-pinctrl"
+  "allwinner,sun8i-a23-r-pinctrl"
 - reg: Should contain the register physical address and length for the
   pin controller.
 

Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt

@@ -46,7 +46,7 @@ Valid values for pins are:
   gpio0-gpio89
 
 Valid values for function are:
-  cam_mclk, codec_mic_i2s, codec_spkr_i2s, gsbi1, gsbi2, gsbi3, gsbi4,
+  cam_mclk, codec_mic_i2s, codec_spkr_i2s, gpio, gsbi1, gsbi2, gsbi3, gsbi4,
   gsbi4_cam_i2c, gsbi5, gsbi5_spi_cs1, gsbi5_spi_cs2, gsbi5_spi_cs3, gsbi6,
   gsbi6_spi_cs1, gsbi6_spi_cs2, gsbi6_spi_cs3, gsbi7, gsbi7_spi_cs1,
   gsbi7_spi_cs2, gsbi7_spi_cs3, gsbi_cam_i2c, hdmi, mi2s, riva_bt, riva_fm,

Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt

@@ -51,7 +51,7 @@ Valid values for qcom,pins are:
 
 
 Valid values for function are:
-  mdio, mi2s, pdm, ssbi, spmi, audio_pcm, gsbi1, gsbi2, gsbi4, gsbi5,
+  mdio, mi2s, pdm, ssbi, spmi, audio_pcm, gpio, gsbi1, gsbi2, gsbi4, gsbi5,
   gsbi5_spi_cs1, gsbi5_spi_cs2, gsbi5_spi_cs3, gsbi6, gsbi7, nss_spi, sdc1,
   spdif, nand, tsif1, tsif2, usb_fs_n, usb_fs, usb2_hsic, rgmii2, sata,
   pcie1_rst, pcie1_prsnt, pcie1_pwren_n, pcie1_pwren, pcie1_pwrflt,

Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt

@@ -0,0 +1,181 @@
+Qualcomm MSM8960 TLMM block
+
+This binding describes the Top Level Mode Multiplexer block found in the
+MSM8960 platform.
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be "qcom,msm8960-pinctrl"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: the base address and size of the TLMM register space.
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: should specify the TLMM summary IRQ.
+
+- interrupt-controller:
+	Usage: required
+	Value type: <none>
+	Definition: identifies this node as an interrupt controller
+
+- #interrupt-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 2. Specifying the pin number and flags, as defined
+		    in <dt-bindings/interrupt-controller/irq.h>
+
+- gpio-controller:
+	Usage: required
+	Value type: <none>
+	Definition: identifies this node as a gpio controller
+
+- #gpio-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 2. Specifying the pin number and flags, as defined
+		    in <dt-bindings/gpio/gpio.h>
+
+Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+a general description of GPIO and interrupt bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+The pin configuration nodes act as a container for an abitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, drive strength, etc.
+
+
+PIN CONFIGURATION NODES:
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+
+- pins:
+	Usage: required
+	Value type: <string-array>
+	Definition: List of gpio pins affected by the properties specified in
+		    this subnode.  Valid pins are:
+		    gpio0-gpio151,
+		    sdc1_clk,
+		    sdc1_cmd,
+		    sdc1_data
+		    sdc3_clk,
+		    sdc3_cmd,
+		    sdc3_data
+
+- function:
+	Usage: required
+	Value type: <string>
+	Definition: Specify the alternative function to be configured for the
+		    specified pins. Functions are only valid for gpio pins.
+		    Valid values are:
+		    audio_pcm, bt, cam_mclk0, cam_mclk1, cam_mclk2,
+		    codec_mic_i2s, codec_spkr_i2s, ext_gps, fm, gps_blanking,
+		    gps_pps_in, gps_pps_out, gp_clk_0a, gp_clk_0b, gp_clk_1a,
+		    gp_clk_1b, gp_clk_2a, gp_clk_2b, gp_mn, gp_pdm_0a,
+		    gp_pdm_0b, gp_pdm_1a, gp_pdm_1b, gp_pdm_2a, gp_pdm_2b, gpio,
+		    gsbi1, gsbi1_spi_cs1_n, gsbi1_spi_cs2a_n, gsbi1_spi_cs2b_n,
+		    gsbi1_spi_cs3_n, gsbi2, gsbi2_spi_cs1_n, gsbi2_spi_cs2_n,
+		    gsbi2_spi_cs3_n, gsbi3, gsbi4, gsbi4_3d_cam_i2c_l,
+		    gsbi4_3d_cam_i2c_r, gsbi5, gsbi5_3d_cam_i2c_l,
+		    gsbi5_3d_cam_i2c_r, gsbi6, gsbi7, gsbi8, gsbi9, gsbi10,
+		    gsbi11, gsbi11_spi_cs1a_n, gsbi11_spi_cs1b_n,
+		    gsbi11_spi_cs2a_n, gsbi11_spi_cs2b_n, gsbi11_spi_cs3_n,
+		    gsbi12, hdmi_cec, hdmi_ddc_clock, hdmi_ddc_data,
+		    hdmi_hot_plug_detect, hsic, mdp_vsync, mi2s, mic_i2s,
+		    pmb_clk, pmb_ext_ctrl, ps_hold, rpm_wdog, sdc2, sdc4, sdc5,
+		    slimbus1, slimbus2, spkr_i2s, ssbi1, ssbi2, ssbi_ext_gps,
+		    ssbi_pmic2, ssbi_qpa1, ssbi_ts, tsif1, tsif2, ts_eoc,
+		    usb_fs1, usb_fs1_oe, usb_fs1_oe_n, usb_fs2, usb_fs2_oe,
+		    usb_fs2_oe_n, vfe_camif_timer1_a, vfe_camif_timer1_b,
+		    vfe_camif_timer2, vfe_camif_timer3_a, vfe_camif_timer3_b,
+		    vfe_camif_timer4_a, vfe_camif_timer4_b, vfe_camif_timer4_c,
+		    vfe_camif_timer5_a, vfe_camif_timer5_b, vfe_camif_timer6_a,
+		    vfe_camif_timer6_b, vfe_camif_timer6_c, vfe_camif_timer7_a,
+		    vfe_camif_timer7_b, vfe_camif_timer7_c, wlan
+
+- bias-disable:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins should be configued as no pull.
+
+- bias-pull-down:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins should be configued as pull down.
+
+- bias-pull-up:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins should be configued as pull up.
+
+- output-high:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins are configured in output mode, driven
+		    high.
+		    Not valid for sdc pins.
+
+- output-low:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins are configured in output mode, driven
+		    low.
+		    Not valid for sdc pins.
+
+- drive-strength:
+	Usage: optional
+	Value type: <u32>
+	Definition: Selects the drive strength for the specified pins, in mA.
+		    Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
+
+Example:
+
+	msmgpio: pinctrl@800000 {
+		compatible = "qcom,msm8960-pinctrl";
+		reg = <0x800000 0x4000>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <0 16 0x4>;
+
+		gsbi8_uart: gsbi8-uart {
+			mux {
+				pins = "gpio34", "gpio35";
+				function = "gsbi8";
+			};
+
+			tx {
+				pins = "gpio34";
+				drive-strength = <4>;
+				bias-disable;
+			};
+
+			rx {
+				pins = "gpio35";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+		};
+	};

Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt

@@ -70,7 +70,7 @@ Valid values for function are:
   cam_mckl0, cam_mclk1, cam_mclk2, cam_mclk3, mdp_vsync, hdmi_cec, hdmi_ddc,
   hdmi_hpd, edp_hpd, gp_pdm0, gp_pdm1, gp_pdm2, gp_pdm3, gp0_clk, gp1_clk,
   gp_mn, tsif1, tsif2, hsic, grfc, audio_ref_clk, qua_mi2s, pri_mi2s, spkr_mi2s,
-  ter_mi2s, sec_mi2s, bt, fm, wlan, slimbus
+  ter_mi2s, sec_mi2s, bt, fm, wlan, slimbus, gpio
 
   (Note that this is not yet the complete list of functions)
 

Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt

@@ -15,6 +15,7 @@ Required Properties:
     - "renesas,pfc-r8a7778": for R8A7778 (R-Mobile M1) compatible pin-controller.
     - "renesas,pfc-r8a7779": for R8A7779 (R-Car H1) compatible pin-controller.
     - "renesas,pfc-r8a7790": for R8A7790 (R-Car H2) compatible pin-controller.
+    - "renesas,pfc-r8a7791": for R8A7791 (R-Car M2) compatible pin-controller.
     - "renesas,pfc-sh7372": for SH7372 (SH-Mobile AP4) compatible pin-controller.
     - "renesas,pfc-sh73a0": for SH73A0 (SH-Mobile AG5) compatible pin-controller.
 

Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt

@@ -21,6 +21,7 @@ defined as gpio sub-nodes of the pinmux controller.
 Required properties for iomux controller:
   - compatible: one of "rockchip,rk2928-pinctrl", "rockchip,rk3066a-pinctrl"
 		       "rockchip,rk3066b-pinctrl", "rockchip,rk3188-pinctrl"
+		       "rockchip,rk3288-pinctrl"
   - rockchip,grf: phandle referencing a syscon providing the
 	 "general register files"
 
@@ -36,7 +37,7 @@ Deprecated properties for iomux controller:
 	 Use rockchip,grf and rockchip,pmu described above instead.
 
 Required properties for gpio sub nodes:
-  - compatible: "rockchip,gpio-bank", "rockchip,rk3188-gpio-bank0"
+  - compatible: "rockchip,gpio-bank"
   - reg: register of the gpio bank (different than the iomux registerset)
   - interrupts: base interrupt of the gpio bank in the interrupt controller
   - clocks: clock that drives this bank
@@ -50,6 +51,7 @@ Required properties for gpio sub nodes:
     bindings/interrupt-controller/interrupts.txt
 
 Deprecated properties for gpio sub nodes:
+  - compatible: "rockchip,rk3188-gpio-bank0"
   - reg: second element: separate pull register for rk3188 bank0, use
 	 rockchip,pmu described above instead
 

Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt

@@ -44,7 +44,11 @@ Required Properties:
 - Pin mux/config groups as child nodes: The pin mux (selecting pin function
   mode) and pin config (pull up/down, driver strength) settings are represented
   as child nodes of the pin-controller node. There should be atleast one
-  child node and there is no limit on the count of these child nodes.
+  child node and there is no limit on the count of these child nodes. It is
+  also possible for a child node to consist of several further child nodes
+  to allow grouping multiple pinctrl groups into one. The format of second
+  level child nodes is exactly the same as for first level ones and is
+  described below.
 
   The child node should contain a list of pin(s) on which a particular pin
   function selection or pin configuration (or both) have to applied. This
@@ -71,6 +75,7 @@ Required Properties:
   "samsung,pins" property of the child node. The following pin configuration
   properties are supported.
 
+  - samsung,pin-val: Initial value of pin output buffer.
   - samsung,pin-pud: Pull up/down configuration.
   - samsung,pin-drv: Drive strength configuration.
   - samsung,pin-pud-pdn: Pull up/down configuration in power down mode.
@@ -249,6 +254,23 @@ Example 1: A pin-controller node with pin groups.
 			samsung,pin-pud = <3>;
 			samsung,pin-drv = <0>;
 		};
+
+		sd4_bus8: sd4-bus-width8 {
+			part-1 {
+				samsung,pins = "gpk0-3", "gpk0-4",
+						"gpk0-5", "gpk0-6";
+				samsung,pin-function = <3>;
+				samsung,pin-pud = <3>;
+				samsung,pin-drv = <3>;
+			};
+			part-2 {
+				samsung,pins = "gpk1-3", "gpk1-4",
+						"gpk1-5", "gpk1-6";
+				samsung,pin-function = <4>;
+				samsung,pin-pud = <4>;
+				samsung,pin-drv = <3>;
+			};
+		};
 	};
 
 Example 2: A pin-controller node with external wakeup interrupt controller node.

arch/arm/boot/dts/imx27-pinfunc.h

@@ -101,14 +101,6 @@
 #define MX27_PAD_CONTRAST__GPIO1_30                        0x1e 0x032
 #define MX27_PAD_OE_ACD__OE_ACD                            0x1f 0x004
 #define MX27_PAD_OE_ACD__GPIO1_31                          0x1f 0x032
-#define MX27_PAD_UNUSED0__UNUSED0                          0x20 0x004
-#define MX27_PAD_UNUSED0__GPIO2_0                          0x20 0x032
-#define MX27_PAD_UNUSED1__UNUSED1                          0x21 0x004
-#define MX27_PAD_UNUSED1__GPIO2_1                          0x21 0x032
-#define MX27_PAD_UNUSED2__UNUSED2                          0x22 0x004
-#define MX27_PAD_UNUSED2__GPIO2_2                          0x22 0x032
-#define MX27_PAD_UNUSED3__UNUSED3                          0x23 0x004
-#define MX27_PAD_UNUSED3__GPIO2_3                          0x23 0x032
 #define MX27_PAD_SD2_D0__SD2_D0                            0x24 0x004
 #define MX27_PAD_SD2_D0__MSHC_DATA0                        0x24 0x005
 #define MX27_PAD_SD2_D0__GPIO2_4                           0x24 0x032
@@ -183,16 +175,6 @@
 #define MX27_PAD_USBH1_RXDP__USBH1_RXDP                    0x3f 0x004
 #define MX27_PAD_USBH1_RXDP__UART4_RXD                     0x3f 0x001
 #define MX27_PAD_USBH1_RXDP__GPIO2_31                      0x3f 0x032
-#define MX27_PAD_UNUSED4__UNUSED4                          0x40 0x004
-#define MX27_PAD_UNUSED4__GPIO3_0                          0x40 0x032
-#define MX27_PAD_UNUSED5__UNUSED5                          0x41 0x004
-#define MX27_PAD_UNUSED5__GPIO3_1                          0x41 0x032
-#define MX27_PAD_UNUSED6__UNUSED6                          0x42 0x004
-#define MX27_PAD_UNUSED6__GPIO3_2                          0x42 0x032
-#define MX27_PAD_UNUSED7__UNUSED7                          0x43 0x004
-#define MX27_PAD_UNUSED7__GPIO3_3                          0x43 0x032
-#define MX27_PAD_UNUSED8__UNUSED8                          0x44 0x004
-#define MX27_PAD_UNUSED8__GPIO3_4                          0x44 0x032
 #define MX27_PAD_I2C2_SDA__I2C2_SDA                        0x45 0x004
 #define MX27_PAD_I2C2_SDA__GPIO3_5                         0x45 0x032
 #define MX27_PAD_I2C2_SCL__I2C2_SCL                        0x46 0x004
@@ -422,18 +404,6 @@
 #define MX27_PAD_USBOTG_CLK__GPIO5_24                      0x98 0x032
 #define MX27_PAD_USBOTG_DATA7__USBOTG_DATA7                0x99 0x004
 #define MX27_PAD_USBOTG_DATA7__GPIO5_25                    0x99 0x032
-#define MX27_PAD_UNUSED9__UNUSED9                          0x9a 0x004
-#define MX27_PAD_UNUSED9__GPIO5_26                         0x9a 0x032
-#define MX27_PAD_UNUSED10__UNUSED10                        0x9b 0x004
-#define MX27_PAD_UNUSED10__GPIO5_27                        0x9b 0x032
-#define MX27_PAD_UNUSED11__UNUSED11                        0x9c 0x004
-#define MX27_PAD_UNUSED11__GPIO5_28                        0x9c 0x032
-#define MX27_PAD_UNUSED12__UNUSED12                        0x9d 0x004
-#define MX27_PAD_UNUSED12__GPIO5_29                        0x9d 0x032
-#define MX27_PAD_UNUSED13__UNUSED13                        0x9e 0x004
-#define MX27_PAD_UNUSED13__GPIO5_30                        0x9e 0x032
-#define MX27_PAD_UNUSED14__UNUSED14                        0x9f 0x004
-#define MX27_PAD_UNUSED14__GPIO5_31                        0x9f 0x032
 #define MX27_PAD_NFRB__NFRB                                0xa0 0x000
 #define MX27_PAD_NFRB__ETMTRACEPKT3                        0xa0 0x005
 #define MX27_PAD_NFRB__GPIO6_0                             0xa0 0x032
@@ -506,21 +476,5 @@
 #define MX27_PAD_ATA_DATA15__ETMTRACEPKT4                  0xb7 0x005
 #define MX27_PAD_ATA_DATA15__FEC_TX_EN                     0xb7 0x006
 #define MX27_PAD_ATA_DATA15__GPIO6_23                      0xb7 0x032
-#define MX27_PAD_UNUSED15__UNUSED15                        0xb8 0x004
-#define MX27_PAD_UNUSED15__GPIO6_24                        0xb8 0x032
-#define MX27_PAD_UNUSED16__UNUSED16                        0xb9 0x004
-#define MX27_PAD_UNUSED16__GPIO6_25                        0xb9 0x032
-#define MX27_PAD_UNUSED17__UNUSED17                        0xba 0x004
-#define MX27_PAD_UNUSED17__GPIO6_26                        0xba 0x032
-#define MX27_PAD_UNUSED18__UNUSED18                        0xbb 0x004
-#define MX27_PAD_UNUSED18__GPIO6_27                        0xbb 0x032
-#define MX27_PAD_UNUSED19__UNUSED19                        0xbc 0x004
-#define MX27_PAD_UNUSED19__GPIO6_28                        0xbc 0x032
-#define MX27_PAD_UNUSED20__UNUSED20                        0xbd 0x004
-#define MX27_PAD_UNUSED20__GPIO6_29                        0xbd 0x032
-#define MX27_PAD_UNUSED21__UNUSED21                        0xbe 0x004
-#define MX27_PAD_UNUSED21__GPIO6_30                        0xbe 0x032
-#define MX27_PAD_UNUSED22__UNUSED22                        0xbf 0x004
-#define MX27_PAD_UNUSED22__GPIO6_31                        0xbf 0x032
 
 #endif /* __DTS_IMX27_PINFUNC_H */

arch/arm/mach-sunxi/Kconfig

@@ -4,7 +4,6 @@ menuconfig ARCH_SUNXI
 	select CLKSRC_MMIO
 	select GENERIC_IRQ_CHIP
 	select PINCTRL
-	select PINCTRL_SUNXI
 	select SUN4I_TIMER
 
 if ARCH_SUNXI

drivers/pinctrl/Kconfig

@@ -11,10 +11,10 @@ menu "Pin controllers"
 	depends on PINCTRL
 
 config PINMUX
-	bool "Support pin multiplexing controllers"
+	bool "Support pin multiplexing controllers" if COMPILE_TEST
 
 config PINCONF
-	bool "Support pin configuration controllers"
+	bool "Support pin configuration controllers" if COMPILE_TEST
 
 config GENERIC_PINCONF
 	bool
@@ -26,29 +26,6 @@ config DEBUG_PINCTRL
 	help
 	  Say Y here to add some extra checks and diagnostics to PINCTRL calls.
 
-config PINCTRL_ABX500
-	bool "ST-Ericsson ABx500 family Mixed Signal Circuit gpio functions"
-	depends on AB8500_CORE
-	select GENERIC_PINCONF
-	help
-	  Select this to enable the ABx500 family IC GPIO driver
-
-config PINCTRL_AB8500
-	bool "AB8500 pin controller driver"
-	depends on PINCTRL_ABX500 && ARCH_U8500
-
-config PINCTRL_AB8540
-	bool "AB8540 pin controller driver"
-	depends on PINCTRL_ABX500 && ARCH_U8500
-
-config PINCTRL_AB9540
-	bool "AB9540 pin controller driver"
-	depends on PINCTRL_ABX500 && ARCH_U8500
-
-config PINCTRL_AB8505
-	bool "AB8505 pin controller driver"
-	depends on PINCTRL_ABX500 && ARCH_U8500
-
 config PINCTRL_ADI2
 	bool "ADI pin controller driver"
 	depends on BLACKFIN
@@ -93,7 +70,7 @@ config PINCTRL_AT91
 config PINCTRL_BAYTRAIL
 	bool "Intel Baytrail GPIO pin control"
 	depends on GPIOLIB && ACPI && X86
-	select IRQ_DOMAIN
+	select GPIOLIB_IRQCHIP
 	help
 	  driver for memory mapped GPIO functionality on Intel Baytrail
 	  platforms. Supports 3 banks with 102, 28 and 44 gpios.
@@ -130,6 +107,13 @@ config PINCTRL_IMX1_CORE
 	select PINMUX
 	select PINCONF
 
+config PINCTRL_IMX1
+	bool "IMX1 pinctrl driver"
+	depends on SOC_IMX1
+	select PINCTRL_IMX1_CORE
+	help
+	  Say Y here to enable the imx1 pinctrl driver
+
 config PINCTRL_IMX27
 	bool "IMX27 pinctrl driver"
 	depends on SOC_IMX27
@@ -226,58 +210,6 @@ config PINCTRL_IMX28
 	bool
 	select PINCTRL_MXS
 
-config PINCTRL_MSM
-	bool
-	select PINMUX
-	select PINCONF
-	select GENERIC_PINCONF
-	select GPIOLIB_IRQCHIP
-
-config PINCTRL_APQ8064
-	tristate "Qualcomm APQ8064 pin controller driver"
-	depends on GPIOLIB && OF
-	select PINCTRL_MSM
-	help
-	  This is the pinctrl, pinmux, pinconf and gpiolib driver for the
-	  Qualcomm TLMM block found in the Qualcomm APQ8064 platform.
-
-config PINCTRL_IPQ8064
-	tristate "Qualcomm IPQ8064 pin controller driver"
-	depends on GPIOLIB && OF
-	select PINCTRL_MSM
-	help
-	  This is the pinctrl, pinmux, pinconf and gpiolib driver for the
-	  Qualcomm TLMM block found in the Qualcomm IPQ8064 platform.
-
-config PINCTRL_MSM8X74
-	tristate "Qualcomm 8x74 pin controller driver"
-	depends on GPIOLIB && OF && (ARCH_QCOM || COMPILE_TEST)
-	select PINCTRL_MSM
-	help
-	  This is the pinctrl, pinmux, pinconf and gpiolib driver for the
-	  Qualcomm TLMM block found in the Qualcomm 8974 platform.
-
-config PINCTRL_NOMADIK
-	bool "Nomadik pin controller driver"
-	depends on ARCH_U8500 || ARCH_NOMADIK
-	select PINMUX
-	select PINCONF
-	select GPIOLIB
-	select OF_GPIO
-	select GPIOLIB_IRQCHIP
-
-config PINCTRL_STN8815
-	bool "STN8815 pin controller driver"
-	depends on PINCTRL_NOMADIK && ARCH_NOMADIK
-
-config PINCTRL_DB8500
-	bool "DB8500 pin controller driver"
-	depends on PINCTRL_NOMADIK && ARCH_U8500
-
-config PINCTRL_DB8540
-	bool "DB8540 pin controller driver"
-	depends on PINCTRL_NOMADIK && ARCH_U8500
-
 config PINCTRL_ROCKCHIP
 	bool
 	select PINMUX
@@ -356,22 +288,6 @@ config PINCTRL_COH901
 	  COH 901 335 and COH 901 571/3. They contain 3, 5 or 7
 	  ports of 8 GPIO pins each.
 
-config PINCTRL_SAMSUNG
-	bool
-	select PINMUX
-	select PINCONF
-
-config PINCTRL_EXYNOS
-	bool "Pinctrl driver data for Samsung EXYNOS SoCs other than 5440"
-	depends on OF && GPIOLIB && (ARCH_EXYNOS || ARCH_S5PV210)
-	select PINCTRL_SAMSUNG
-
-config PINCTRL_EXYNOS5440
-	bool "Samsung EXYNOS5440 SoC pinctrl driver"
-	depends on SOC_EXYNOS5440
-	select PINMUX
-	select PINCONF
-
 config PINCTRL_PALMAS
 	bool "Pinctrl driver for the PALMAS Series MFD devices"
 	depends on OF && MFD_PALMAS
@@ -383,18 +299,11 @@ config PINCTRL_PALMAS
 	  open drain configuration for the Palmas series devices like
 	  TPS65913, TPS80036 etc.
 
-config PINCTRL_S3C24XX
-	bool "Samsung S3C24XX SoC pinctrl driver"
-	depends on ARCH_S3C24XX
-	select PINCTRL_SAMSUNG
-
-config PINCTRL_S3C64XX
-	bool "Samsung S3C64XX SoC pinctrl driver"
-	depends on ARCH_S3C64XX
-	select PINCTRL_SAMSUNG
-
 source "drivers/pinctrl/berlin/Kconfig"
 source "drivers/pinctrl/mvebu/Kconfig"
+source "drivers/pinctrl/nomadik/Kconfig"
+source "drivers/pinctrl/qcom/Kconfig"
+source "drivers/pinctrl/samsung/Kconfig"
 source "drivers/pinctrl/sh-pfc/Kconfig"
 source "drivers/pinctrl/spear/Kconfig"
 source "drivers/pinctrl/sunxi/Kconfig"

drivers/pinctrl/Makefile

@@ -9,11 +9,6 @@ ifeq ($(CONFIG_OF),y)
 obj-$(CONFIG_PINCTRL)		+= devicetree.o
 endif
 obj-$(CONFIG_GENERIC_PINCONF)	+= pinconf-generic.o
-obj-$(CONFIG_PINCTRL_ABX500)	+= pinctrl-abx500.o
-obj-$(CONFIG_PINCTRL_AB8500)	+= pinctrl-ab8500.o
-obj-$(CONFIG_PINCTRL_AB8540)	+= pinctrl-ab8540.o
-obj-$(CONFIG_PINCTRL_AB9540)	+= pinctrl-ab9540.o
-obj-$(CONFIG_PINCTRL_AB8505)	+= pinctrl-ab8505.o
 obj-$(CONFIG_PINCTRL_ADI2)	+= pinctrl-adi2.o
 obj-$(CONFIG_PINCTRL_AS3722)	+= pinctrl-as3722.o
 obj-$(CONFIG_PINCTRL_BF54x)	+= pinctrl-adi2-bf54x.o
@@ -24,6 +19,7 @@ obj-$(CONFIG_PINCTRL_BAYTRAIL)	+= pinctrl-baytrail.o
 obj-$(CONFIG_PINCTRL_BCM281XX)	+= pinctrl-bcm281xx.o
 obj-$(CONFIG_PINCTRL_IMX)	+= pinctrl-imx.o
 obj-$(CONFIG_PINCTRL_IMX1_CORE)	+= pinctrl-imx1-core.o
+obj-$(CONFIG_PINCTRL_IMX1)	+= pinctrl-imx1.o
 obj-$(CONFIG_PINCTRL_IMX27)	+= pinctrl-imx27.o
 obj-$(CONFIG_PINCTRL_IMX35)	+= pinctrl-imx35.o
 obj-$(CONFIG_PINCTRL_IMX50)	+= pinctrl-imx50.o
@@ -38,14 +34,6 @@ obj-$(CONFIG_PINCTRL_MXS)	+= pinctrl-mxs.o
 obj-$(CONFIG_PINCTRL_IMX23)	+= pinctrl-imx23.o
 obj-$(CONFIG_PINCTRL_IMX25)	+= pinctrl-imx25.o
 obj-$(CONFIG_PINCTRL_IMX28)	+= pinctrl-imx28.o
-obj-$(CONFIG_PINCTRL_MSM)	+= pinctrl-msm.o
-obj-$(CONFIG_PINCTRL_APQ8064)	+= pinctrl-apq8064.o
-obj-$(CONFIG_PINCTRL_IPQ8064)	+= pinctrl-ipq8064.o
-obj-$(CONFIG_PINCTRL_MSM8X74)	+= pinctrl-msm8x74.o
-obj-$(CONFIG_PINCTRL_NOMADIK)	+= pinctrl-nomadik.o
-obj-$(CONFIG_PINCTRL_STN8815)	+= pinctrl-nomadik-stn8815.o
-obj-$(CONFIG_PINCTRL_DB8500)	+= pinctrl-nomadik-db8500.o
-obj-$(CONFIG_PINCTRL_DB8540)	+= pinctrl-nomadik-db8540.o
 obj-$(CONFIG_PINCTRL_PALMAS)	+= pinctrl-palmas.o
 obj-$(CONFIG_PINCTRL_ROCKCHIP)	+= pinctrl-rockchip.o
 obj-$(CONFIG_PINCTRL_SINGLE)	+= pinctrl-single.o
@@ -59,11 +47,6 @@ obj-$(CONFIG_PINCTRL_TZ1090)	+= pinctrl-tz1090.o
 obj-$(CONFIG_PINCTRL_TZ1090_PDC)	+= pinctrl-tz1090-pdc.o
 obj-$(CONFIG_PINCTRL_U300)	+= pinctrl-u300.o
 obj-$(CONFIG_PINCTRL_COH901)	+= pinctrl-coh901.o
-obj-$(CONFIG_PINCTRL_SAMSUNG)	+= pinctrl-samsung.o
-obj-$(CONFIG_PINCTRL_EXYNOS)	+= pinctrl-exynos.o
-obj-$(CONFIG_PINCTRL_EXYNOS5440)	+= pinctrl-exynos5440.o
-obj-$(CONFIG_PINCTRL_S3C24XX)	+= pinctrl-s3c24xx.o
-obj-$(CONFIG_PINCTRL_S3C64XX)	+= pinctrl-s3c64xx.o
 obj-$(CONFIG_PINCTRL_XWAY)	+= pinctrl-xway.o
 obj-$(CONFIG_PINCTRL_LANTIQ)	+= pinctrl-lantiq.o
 obj-$(CONFIG_PINCTRL_TB10X)	+= pinctrl-tb10x.o
@@ -72,8 +55,11 @@ obj-$(CONFIG_PINCTRL_VF610)	+= pinctrl-vf610.o
 
 obj-$(CONFIG_ARCH_BERLIN)	+= berlin/
 obj-$(CONFIG_PLAT_ORION)        += mvebu/
+obj-y				+= nomadik/
+obj-$(CONFIG_ARCH_QCOM)		+= qcom/
+obj-$(CONFIG_PLAT_SAMSUNG)	+= samsung/
 obj-$(CONFIG_ARCH_SHMOBILE)	+= sh-pfc/
 obj-$(CONFIG_SUPERH)		+= sh-pfc/
 obj-$(CONFIG_PLAT_SPEAR)	+= spear/
-obj-$(CONFIG_ARCH_VT8500)	+= vt8500/
 obj-$(CONFIG_ARCH_SUNXI)	+= sunxi/
+obj-$(CONFIG_ARCH_VT8500)	+= vt8500/

drivers/pinctrl/core.c

@@ -992,29 +992,15 @@ int pinctrl_select_state(struct pinctrl *p, struct pinctrl_state *state)
 
 	if (p->state) {
 		/*
-		 * The set of groups with a mux configuration in the old state
+		 * For each pinmux setting in the old state, forget SW's record
-		 * may not be identical to the set of groups with a mux setting
+		 * of mux owner for that pingroup. Any pingroups which are
-		 * in the new state. While this might be unusual, it's entirely
+		 * still owned by the new state will be re-acquired by the call
-		 * possible for the "user"-supplied mapping table to be written
+		 * to pinmux_enable_setting() in the loop below.
-		 * that way. For each group that was configured in the old state
-		 * but not in the new state, this code puts that group into a
-		 * safe/disabled state.
 		 */
 		list_for_each_entry(setting, &p->state->settings, node) {
-			bool found = false;
 			if (setting->type != PIN_MAP_TYPE_MUX_GROUP)
 				continue;
-			list_for_each_entry(setting2, &state->settings, node) {
+			pinmux_disable_setting(setting);
-				if (setting2->type != PIN_MAP_TYPE_MUX_GROUP)
-					continue;
-				if (setting2->data.mux.group ==
-						setting->data.mux.group) {
-					found = true;
-					break;
-				}
-			}
-			if (!found)
-				pinmux_disable_setting(setting);
 		}
 	}
 

drivers/pinctrl/nomadik/Kconfig

@@ -0,0 +1,51 @@
+if ARCH_U8500
+
+config PINCTRL_ABX500
+	bool "ST-Ericsson ABx500 family Mixed Signal Circuit gpio functions"
+	depends on AB8500_CORE
+	select GENERIC_PINCONF
+	help
+	  Select this to enable the ABx500 family IC GPIO driver
+
+config PINCTRL_AB8500
+	bool "AB8500 pin controller driver"
+	depends on PINCTRL_ABX500 && ARCH_U8500
+
+config PINCTRL_AB8540
+	bool "AB8540 pin controller driver"
+	depends on PINCTRL_ABX500 && ARCH_U8500
+
+config PINCTRL_AB9540
+	bool "AB9540 pin controller driver"
+	depends on PINCTRL_ABX500 && ARCH_U8500
+
+config PINCTRL_AB8505
+	bool "AB8505 pin controller driver"
+	depends on PINCTRL_ABX500 && ARCH_U8500
+
+endif
+
+if (ARCH_U8500 || ARCH_NOMADIK)
+
+config PINCTRL_NOMADIK
+	bool "Nomadik pin controller driver"
+	depends on ARCH_U8500 || ARCH_NOMADIK
+	select PINMUX
+	select PINCONF
+	select GPIOLIB
+	select OF_GPIO
+	select GPIOLIB_IRQCHIP
+
+config PINCTRL_STN8815
+	bool "STN8815 pin controller driver"
+	depends on PINCTRL_NOMADIK && ARCH_NOMADIK
+
+config PINCTRL_DB8500
+	bool "DB8500 pin controller driver"
+	depends on PINCTRL_NOMADIK && ARCH_U8500
+
+config PINCTRL_DB8540
+	bool "DB8540 pin controller driver"
+	depends on PINCTRL_NOMADIK && ARCH_U8500
+
+endif

drivers/pinctrl/nomadik/Makefile

@@ -0,0 +1,10 @@
+# Nomadik family pin control drivers
+obj-$(CONFIG_PINCTRL_ABX500)	+= pinctrl-abx500.o
+obj-$(CONFIG_PINCTRL_AB8500)	+= pinctrl-ab8500.o
+obj-$(CONFIG_PINCTRL_AB8540)	+= pinctrl-ab8540.o
+obj-$(CONFIG_PINCTRL_AB9540)	+= pinctrl-ab9540.o
+obj-$(CONFIG_PINCTRL_AB8505)	+= pinctrl-ab8505.o
+obj-$(CONFIG_PINCTRL_NOMADIK)	+= pinctrl-nomadik.o
+obj-$(CONFIG_PINCTRL_STN8815)	+= pinctrl-nomadik-stn8815.o
+obj-$(CONFIG_PINCTRL_DB8500)	+= pinctrl-nomadik-db8500.o
+obj-$(CONFIG_PINCTRL_DB8540)	+= pinctrl-nomadik-db8540.o

drivers/pinctrl/nomadik/pinctrl-abx500.c

@@ -32,8 +32,8 @@
 #include <linux/pinctrl/machine.h>
 
 #include "pinctrl-abx500.h"
-#include "core.h"
+#include "../core.h"
-#include "pinconf.h"
+#include "../pinconf.h"
 
 /*
  * The AB9540 and AB8540 GPIO support are extended versions
@@ -737,20 +737,6 @@ static int abx500_pmx_enable(struct pinctrl_dev *pctldev, unsigned function,
 	return ret;
 }
 
-static void abx500_pmx_disable(struct pinctrl_dev *pctldev,
-			       unsigned function, unsigned group)
-{
-	struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
-	const struct abx500_pingroup *g;
-
-	g = &pct->soc->groups[group];
-	if (g->altsetting < 0)
-		return;
-
-	/* FIXME: poke out the mux, set the pin to some default state? */
-	dev_dbg(pct->dev, "disable group %s, %u pins\n", g->name, g->npins);
-}
-
 static int abx500_gpio_request_enable(struct pinctrl_dev *pctldev,
 			       struct pinctrl_gpio_range *range,
 			       unsigned offset)
@@ -799,7 +785,6 @@ static const struct pinmux_ops abx500_pinmux_ops = {
 	.get_function_name = abx500_pmx_get_func_name,
 	.get_function_groups = abx500_pmx_get_func_groups,
 	.enable = abx500_pmx_enable,
-	.disable = abx500_pmx_disable,
 	.gpio_request_enable = abx500_gpio_request_enable,
 	.gpio_disable_free = abx500_gpio_disable_free,
 };