Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle: "MIPS updates: - All the things that didn't make 3.10. - Removes the Windriver PPMC platform. Nobody will miss it. - Remove a workaround from kernel/irq/irqdomain.c which was there exclusivly for MIPS. Patch by Grant Likely. - More small improvments for the SEAD 3 platform - Improvments on the BMIPS / SMP support for the BCM63xx series. - Various cleanups of dead leftovers. - Platform support for the Cavium Octeon-based EdgeRouter Lite. Two large KVM patchsets didn't make it for this pull request because their respective authors are vacationing" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (124 commits) MIPS: Kconfig: Add missing MODULES dependency to VPE_LOADER MIPS: BCM63xx: CLK: Add dummy clk_{set,round}_rate() functions MIPS: SEAD3: Disable L2 cache on SEAD-3. MIPS: BCM63xx: Enable second core SMP on BCM6328 if available MIPS: BCM63xx: Add SMP support to prom.c MIPS: define write{b,w,l,q}_relaxed MIPS: Expose missing pci_io{map,unmap} declarations MIPS: Malta: Update GCMP detection. Revert "MIPS: make CAC_ADDR and UNCAC_ADDR account for PHYS_OFFSET" MIPS: APSP: Remove <asm/kspd.h> SSB: Kconfig: Amend SSB_EMBEDDED dependencies MIPS: microMIPS: Fix improper definition of ISA exception bit. MIPS: Don't try to decode microMIPS branch instructions where they cannot exist. MIPS: Declare emulate_load_store_microMIPS as a static function. MIPS: Fix typos and cleanup comment MIPS: Cleanup indentation and whitespace MIPS: BMIPS: support booting from physical CPU other than 0 MIPS: Only set cpu_has_mmips if SYS_SUPPORTS_MICROMIPS MIPS: GIC: Fix gic_set_affinity infinite loop MIPS: Don't save/restore OCTEON wide multiplier state on syscalls. ...
2026-05-01 15:00:59 -07:00 · 2013-07-13 14:52:21 -07:00
parent 833e68340d 6ac5310e64
commit d144746478
176 changed files with 2337 additions and 2412 deletions
@@ -30,7 +30,6 @@ platforms += sibyte
 platforms += sni
 platforms += txx9
 platforms += vr41xx
-platforms += wrppmc

 # include the platform specific files
 include $(patsubst %, $(srctree)/arch/mips/%/Platform, $(platforms))
@@ -1,6 +1,7 @@
 config MIPS
 	bool
 	default y
+	select HAVE_CONTEXT_TRACKING
 	select HAVE_GENERIC_DMA_COHERENT
 	select HAVE_IDE
 	select HAVE_OPROFILE
@@ -27,6 +28,7 @@ config MIPS
 	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
+	select GENERIC_PCI_IOMAP
 	select HAVE_ARCH_JUMP_LABEL
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select IRQ_FORCED_THREADING
@@ -46,9 +48,6 @@ config MIPS

 menu "Machine selection"

-config ZONE_DMA
-	bool
-
 choice
 	prompt "System type"
 	default SGI_IP22
@@ -124,11 +123,14 @@ config BCM47XX

 config BCM63XX
 	bool "Broadcom BCM63XX based boards"
+	select BOOT_RAW
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
 	select IRQ_CPU
 	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_HAS_CPU_BMIPS4350 if !BCM63XX_CPU_6338 && !BCM63XX_CPU_6345 && !BCM63XX_CPU_6348
+	select NR_CPUS_DEFAULT_2
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
@@ -341,7 +343,6 @@ config MIPS_SEAD3
 	select DMA_NONCOHERENT
 	select IRQ_CPU
 	select IRQ_GIC
-	select MIPS_CPU_SCACHE
 	select MIPS_MSC
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_HAS_CPU_MIPS32_R2
@@ -420,7 +421,6 @@ config POWERTV
 	select CSRC_POWERTV
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
-	select SYS_HAS_EARLY_PRINTK
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
@@ -713,46 +713,8 @@ config MIKROTIK_RB532
 	  Support the Mikrotik(tm) RouterBoard 532 series,
 	  based on the IDT RC32434 SoC.

-config WR_PPMC
-	bool "Wind River PPMC board"
-	select CEVT_R4K
-	select CSRC_R4K
-	select IRQ_CPU
-	select BOOT_ELF32
-	select DMA_NONCOHERENT
-	select HW_HAS_PCI
-	select PCI_GT64XXX_PCI0
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_MIPS32_R1
-	select SYS_HAS_CPU_MIPS32_R2
-	select SYS_HAS_CPU_MIPS64_R1
-	select SYS_HAS_CPU_NEVADA
-	select SYS_HAS_CPU_RM7000
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	help
-	  This enables support for the Wind River MIPS32 4KC PPMC evaluation
-	  board, which is based on GT64120 bridge chip.
-
-config CAVIUM_OCTEON_SIMULATOR
-	bool "Cavium Networks Octeon Simulator"
-	select CEVT_R4K
-	select 64BIT_PHYS_ADDR
-	select DMA_COHERENT
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_HOTPLUG_CPU
-	select SYS_HAS_CPU_CAVIUM_OCTEON
-	select HOLES_IN_ZONE
-	help
-	  The Octeon simulator is software performance model of the Cavium
-	  Octeon Processor. It supports simulating Octeon processors on x86
-	  hardware.
-
-config CAVIUM_OCTEON_REFERENCE_BOARD
-	bool "Cavium Networks Octeon reference board"
+config CAVIUM_OCTEON_SOC
+	bool "Cavium Networks Octeon SoC based boards"
 	select CEVT_R4K
 	select 64BIT_PHYS_ADDR
 	select DMA_COHERENT
@@ -806,6 +768,8 @@ config NLM_XLR_BOARD
 	select SYS_HAS_EARLY_PRINTK
 	select USB_ARCH_HAS_OHCI if USB_SUPPORT
 	select USB_ARCH_HAS_EHCI if USB_SUPPORT
+	select SYS_SUPPORTS_ZBOOT
+	select SYS_SUPPORTS_ZBOOT_UART16550
 	help
 	  Support for systems based on Netlogic XLR and XLS processors.
 	  Say Y here if you have a XLR or XLS based board.
@@ -832,6 +796,8 @@ config NLM_XLP_BOARD
 	select SYNC_R4K
 	select SYS_HAS_EARLY_PRINTK
 	select USE_OF
+	select SYS_SUPPORTS_ZBOOT
+	select SYS_SUPPORTS_ZBOOT_UART16550
 	help
 	  This board is based on Netlogic XLP Processor.
 	  Say Y here if you have a XLP based board.
@@ -1031,7 +997,6 @@ config CPU_BIG_ENDIAN
 config CPU_LITTLE_ENDIAN
 	bool "Little endian"
 	depends on SYS_SUPPORTS_LITTLE_ENDIAN
-	help

 endchoice

@@ -1964,7 +1929,7 @@ config MIPS_MT_FPAFF

 config MIPS_VPE_LOADER
 	bool "VPE loader support."
-	depends on SYS_SUPPORTS_MULTITHREADING
+	depends on SYS_SUPPORTS_MULTITHREADING && MODULES
 	select CPU_MIPSR2_IRQ_VI
 	select CPU_MIPSR2_IRQ_EI
 	select MIPS_MT
@@ -2382,6 +2347,19 @@ config SECCOMP

 	  If unsure, say Y. Only embedded should say N here.

+config CC_STACKPROTECTOR
+	bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"
+	help
+	  This option turns on the -fstack-protector GCC feature. This
+	  feature puts, at the beginning of functions, a canary value on
+	  the stack just before the return address, and validates
+	  the value just before actually returning.  Stack based buffer
+	  overflows (that need to overwrite this return address) now also
+	  overwrite the canary, which gets detected and the attack is then
+	  neutralized via a kernel panic.
+
+	  This feature requires gcc version 4.2 or above.
+
 config USE_OF
 	bool
 	select OF
@@ -2413,7 +2391,6 @@ config PCI
 	bool "Support for PCI controller"
 	depends on HW_HAS_PCI
 	select PCI_DOMAINS
-	select GENERIC_PCI_IOMAP
 	select NO_GENERIC_PCI_IOPORT_MAP
 	help
 	  Find out whether you have a PCI motherboard. PCI is the name of a
@@ -2479,6 +2456,9 @@ config I8253
 	select CLKEVT_I8253
 	select MIPS_EXTERNAL_TIMER

+config ZONE_DMA
+	bool
+
 config ZONE_DMA32
 	bool

@@ -227,6 +227,10 @@ KBUILD_CPPFLAGS += -DDATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0)

 LDFLAGS			+= -m $(ld-emul)

+ifdef CONFIG_CC_STACKPROTECTOR
+  KBUILD_CFLAGS += -fstack-protector
+endif
+
 ifdef CONFIG_MIPS
 CHECKFLAGS += $(shell $(CC) $(KBUILD_CFLAGS) -dM -E -x c /dev/null | \
 	egrep -vw '__GNUC_(|MINOR_|PATCHLEVEL_)_' | \
@@ -132,7 +132,7 @@ static void __init ap136_pci_init(u8 *eeprom)
 	ath79_register_pci();
 }
 #else
-static inline void ap136_pci_init(void) {}
+static inline void ap136_pci_init(u8 *eeprom) {}
 #endif /* CONFIG_PCI */

 static void __init ap136_setup(void)
@@ -1,6 +1,10 @@
 menu "CPU support"
 	depends on BCM63XX

+config BCM63XX_CPU_3368
+	bool "support 3368 CPU"
+	select HW_HAS_PCI
+
 config BCM63XX_CPU_6328
 	bool "support 6328 CPU"
 	select HW_HAS_PCI
@@ -8,14 +12,9 @@ config BCM63XX_CPU_6328
 config BCM63XX_CPU_6338
 	bool "support 6338 CPU"
 	select HW_HAS_PCI
-	select USB_ARCH_HAS_OHCI
-	select USB_OHCI_BIG_ENDIAN_DESC
-	select USB_OHCI_BIG_ENDIAN_MMIO

 config BCM63XX_CPU_6345
 	bool "support 6345 CPU"
-	select USB_OHCI_BIG_ENDIAN_DESC
-	select USB_OHCI_BIG_ENDIAN_MMIO

 config BCM63XX_CPU_6348
 	bool "support 6348 CPU"
@@ -28,10 +28,46 @@
 #include <bcm63xx_dev_usb_usbd.h>
 #include <board_bcm963xx.h>

+#include <uapi/linux/bcm933xx_hcs.h>
+
 #define PFX	"board_bcm963xx: "

+#define HCS_OFFSET_128K			0x20000
+
 static struct board_info board;

+/*
+ * known 3368 boards
+ */
+#ifdef CONFIG_BCM63XX_CPU_3368
+static struct board_info __initdata board_cvg834g = {
+	.name				= "CVG834G_E15R3921",
+	.expected_cpu_id		= 0x3368,
+
+	.has_uart0			= 1,
+	.has_uart1			= 1,
+
+	.has_enet0			= 1,
+	.has_pci			= 1,
+
+	.enet0 = {
+		.has_phy		= 1,
+		.use_internal_phy	= 1,
+	},
+
+	.leds = {
+		{
+			.name		= "CVG834G:green:power",
+			.gpio		= 37,
+			.default_trigger= "default-on",
+		},
+	},
+
+	.ephy_reset_gpio		= 36,
+	.ephy_reset_gpio_flags		= GPIOF_INIT_HIGH,
+};
+#endif
+
 /*
 * known 6328 boards
 */
@@ -639,6 +675,9 @@ static struct board_info __initdata board_DWVS0 = {
 * all boards
 */
 static const struct board_info __initconst *bcm963xx_boards[] = {
+#ifdef CONFIG_BCM63XX_CPU_3368
+	&board_cvg834g,
+#endif
 #ifdef CONFIG_BCM63XX_CPU_6328
 	&board_96328avng,
 #endif
@@ -722,8 +761,9 @@ void __init board_prom_init(void)
 	unsigned int i;
 	u8 *boot_addr, *cfe;
 	char cfe_version[32];
-	char *board_name;
+	char *board_name = NULL;
 	u32 val;
+	struct bcm_hcs *hcs;

 	/* read base address of boot chip select (0)
 	 * 6328/6362 do not have MPI but boot from a fixed address
@@ -747,7 +787,12 @@ void __init board_prom_init(void)

 	bcm63xx_nvram_init(boot_addr + BCM963XX_NVRAM_OFFSET);

+	if (BCMCPU_IS_3368()) {
+		hcs = (struct bcm_hcs *)boot_addr;
+		board_name = hcs->filename;
+	} else {
 		board_name = bcm63xx_nvram_get_name();
+	}
 	/* find board by name */
 	for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) {
 		if (strncmp(board_name, bcm963xx_boards[i]->name, 16))
@@ -877,5 +922,9 @@ int __init board_register_devices(void)

 	platform_device_register(&bcm63xx_gpio_leds);

+	if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags)
+		gpio_request_one(board.ephy_reset_gpio,
+				board.ephy_reset_gpio_flags, "ephy-reset");
+
 	return 0;
 }
@@ -84,7 +84,7 @@ static void enetx_set(struct clk *clk, int enable)
 	else
 		clk_disable_unlocked(&clk_enet_misc);

-	if (BCMCPU_IS_6358()) {
+	if (BCMCPU_IS_3368() || BCMCPU_IS_6358()) {
 		u32 mask;

 		if (clk->id == 0)
@@ -110,8 +110,7 @@ static struct clk clk_enet1 = {
 */
 static void ephy_set(struct clk *clk, int enable)
 {
-	if (!BCMCPU_IS_6358())
-		return;
+	if (BCMCPU_IS_3368() || BCMCPU_IS_6358())
 		bcm_hwclock_set(CKCTL_6358_EPHY_EN, enable);
 }

@@ -155,8 +154,9 @@ static struct clk clk_enetsw = {
 */
 static void pcm_set(struct clk *clk, int enable)
 {
-	if (!BCMCPU_IS_6358())
-		return;
+	if (BCMCPU_IS_3368())
+		bcm_hwclock_set(CKCTL_3368_PCM_EN, enable);
+	if (BCMCPU_IS_6358())
 		bcm_hwclock_set(CKCTL_6358_PCM_EN, enable);
 }

@@ -211,7 +211,7 @@ static void spi_set(struct clk *clk, int enable)
 		mask = CKCTL_6338_SPI_EN;
 	else if (BCMCPU_IS_6348())
 		mask = CKCTL_6348_SPI_EN;
-	else if (BCMCPU_IS_6358())
+	else if (BCMCPU_IS_3368() || BCMCPU_IS_6358())
 		mask = CKCTL_6358_SPI_EN;
 	else if (BCMCPU_IS_6362())
 		mask = CKCTL_6362_SPI_EN;
@@ -318,6 +318,18 @@ unsigned long clk_get_rate(struct clk *clk)

 EXPORT_SYMBOL(clk_get_rate);

+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	return 0;
+}
+EXPORT_SYMBOL_GPL(clk_set_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	return 0;
+}
+EXPORT_SYMBOL_GPL(clk_round_rate);
+
 struct clk *clk_get(struct device *dev, const char *id)
 {
 	if (!strcmp(id, "enet0"))
@@ -338,7 +350,7 @@ struct clk *clk_get(struct device *dev, const char *id)
 		return &clk_xtm;
 	if (!strcmp(id, "periph"))
 		return &clk_periph;
-	if (BCMCPU_IS_6358() && !strcmp(id, "pcm"))
+	if ((BCMCPU_IS_3368() || BCMCPU_IS_6358()) && !strcmp(id, "pcm"))
 		return &clk_pcm;
 	if ((BCMCPU_IS_6362() || BCMCPU_IS_6368()) && !strcmp(id, "ipsec"))
 		return &clk_ipsec;
@@ -29,6 +29,14 @@ static u8 bcm63xx_cpu_rev;
 static unsigned int bcm63xx_cpu_freq;
 static unsigned int bcm63xx_memory_size;

+static const unsigned long bcm3368_regs_base[] = {
+	__GEN_CPU_REGS_TABLE(3368)
+};
+
+static const int bcm3368_irqs[] = {
+	__GEN_CPU_IRQ_TABLE(3368)
+};
+
 static const unsigned long bcm6328_regs_base[] = {
 	__GEN_CPU_REGS_TABLE(6328)
 };
@@ -116,6 +124,9 @@ unsigned int bcm63xx_get_memory_size(void)
 static unsigned int detect_cpu_clock(void)
 {
 	switch (bcm63xx_get_cpu_id()) {
+	case BCM3368_CPU_ID:
+		return 300000000;
+
 	case BCM6328_CPU_ID:
 	{
 		unsigned int tmp, mips_pll_fcvo;
@@ -266,7 +277,7 @@ static unsigned int detect_memory_size(void)
 		banks = (val & SDRAM_CFG_BANK_MASK) ? 2 : 1;
 	}

-	if (BCMCPU_IS_6358() || BCMCPU_IS_6368()) {
+	if (BCMCPU_IS_3368() || BCMCPU_IS_6358() || BCMCPU_IS_6368()) {
 		val = bcm_memc_readl(MEMC_CFG_REG);
 		rows = (val & MEMC_CFG_ROW_MASK) >> MEMC_CFG_ROW_SHIFT;
 		cols = (val & MEMC_CFG_COL_MASK) >> MEMC_CFG_COL_SHIFT;
@@ -302,12 +313,19 @@ void __init bcm63xx_cpu_init(void)
 		chipid_reg = BCM_6345_PERF_BASE;
 		break;
 	case CPU_BMIPS4350:
-		if ((read_c0_prid() & 0xf0) == 0x10)
+		switch ((read_c0_prid() & 0xff)) {
+		case 0x04:
+			chipid_reg = BCM_3368_PERF_BASE;
+			break;
+		case 0x10:
 			chipid_reg = BCM_6345_PERF_BASE;
-		else
+			break;
+		default:
 			chipid_reg = BCM_6368_PERF_BASE;
 			break;
 		}
+		break;
+	}

 	/*
 	 * really early to panic, but delaying panic would not help since we
@@ -322,6 +340,10 @@ void __init bcm63xx_cpu_init(void)
 	bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT;

 	switch (bcm63xx_cpu_id) {
+	case BCM3368_CPU_ID:
+		bcm63xx_regs_base = bcm3368_regs_base;
+		bcm63xx_irqs = bcm3368_irqs;
+		break;
 	case BCM6328_CPU_ID:
 		bcm63xx_regs_base = bcm6328_regs_base;
 		bcm63xx_irqs = bcm6328_irqs;
@@ -71,6 +71,7 @@ static int __init bcm63xx_detect_flash_type(void)
 	case BCM6348_CPU_ID:
 		/* no way to auto detect so assume parallel */
 		return BCM63XX_FLASH_TYPE_PARALLEL;
+	case BCM3368_CPU_ID:
 	case BCM6358_CPU_ID:
 		val = bcm_gpio_readl(GPIO_STRAPBUS_REG);
 		if (val & STRAPBUS_6358_BOOT_SEL_PARALLEL)
@@ -37,7 +37,8 @@ static __init void bcm63xx_spi_regs_init(void)
 {
 	if (BCMCPU_IS_6338() || BCMCPU_IS_6348())
 		bcm63xx_regs_spi = bcm6348_regs_spi;
-	if (BCMCPU_IS_6358() || BCMCPU_IS_6362() || BCMCPU_IS_6368())
+	if (BCMCPU_IS_3368() || BCMCPU_IS_6358() ||
+		BCMCPU_IS_6362() || BCMCPU_IS_6368())
 		bcm63xx_regs_spi = bcm6358_regs_spi;
 }
 #else
@@ -87,7 +88,8 @@ int __init bcm63xx_spi_register(void)
 		spi_pdata.msg_ctl_width = SPI_6348_MSG_CTL_WIDTH;
 	}

-	if (BCMCPU_IS_6358() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) {
+	if (BCMCPU_IS_3368() || BCMCPU_IS_6358() || BCMCPU_IS_6362() ||
+		BCMCPU_IS_6368()) {
 		spi_resources[0].end += BCM_6358_RSET_SPI_SIZE - 1;
 		spi_pdata.fifo_size = SPI_6358_MSG_DATA_SIZE;
 		spi_pdata.msg_type_shift = SPI_6358_MSG_TYPE_SHIFT;
@@ -54,7 +54,8 @@ int __init bcm63xx_uart_register(unsigned int id)
 	if (id >= ARRAY_SIZE(bcm63xx_uart_devices))
 		return -ENODEV;

-	if (id == 1 && (!BCMCPU_IS_6358() && !BCMCPU_IS_6368()))
+	if (id == 1 && (!BCMCPU_IS_3368() && !BCMCPU_IS_6358() &&
+		!BCMCPU_IS_6368()))
 		return -ENODEV;

 	if (id == 0) {
@@ -27,6 +27,17 @@ static void __internal_irq_unmask_32(unsigned int irq) __maybe_unused;
 static void __internal_irq_unmask_64(unsigned int irq) __maybe_unused;

 #ifndef BCMCPU_RUNTIME_DETECT
+#ifdef CONFIG_BCM63XX_CPU_3368
+#define irq_stat_reg		PERF_IRQSTAT_3368_REG
+#define irq_mask_reg		PERF_IRQMASK_3368_REG
+#define irq_bits		32
+#define is_ext_irq_cascaded	0
+#define ext_irq_start		0
+#define ext_irq_end		0
+#define ext_irq_count		4
+#define ext_irq_cfg_reg1	PERF_EXTIRQ_CFG_REG_3368
+#define ext_irq_cfg_reg2	0
+#endif
 #ifdef CONFIG_BCM63XX_CPU_6328
 #define irq_stat_reg		PERF_IRQSTAT_6328_REG
 #define irq_mask_reg		PERF_IRQMASK_6328_REG
@@ -140,6 +151,13 @@ static void bcm63xx_init_irq(void)
 	irq_mask_addr = bcm63xx_regset_address(RSET_PERF);

 	switch (bcm63xx_get_cpu_id()) {
+	case BCM3368_CPU_ID:
+		irq_stat_addr += PERF_IRQSTAT_3368_REG;
+		irq_mask_addr += PERF_IRQMASK_3368_REG;
+		irq_bits = 32;
+		ext_irq_count = 4;
+		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_3368;
+		break;
 	case BCM6328_CPU_ID:
 		irq_stat_addr += PERF_IRQSTAT_6328_REG;
 		irq_mask_addr += PERF_IRQMASK_6328_REG;
@@ -294,6 +312,10 @@ asmlinkage void plat_irq_dispatch(void)

 		if (cause & CAUSEF_IP7)
 			do_IRQ(7);
+		if (cause & CAUSEF_IP0)
+			do_IRQ(0);
+		if (cause & CAUSEF_IP1)
+			do_IRQ(1);
 		if (cause & CAUSEF_IP2)
 			dispatch_internal();
 		if (!is_ext_irq_cascaded) {
@@ -475,6 +497,7 @@ static int bcm63xx_external_irq_set_type(struct irq_data *d,
 			reg &= ~EXTIRQ_CFG_BOTHEDGE_6348(irq);
 		break;

+	case BCM3368_CPU_ID:
 	case BCM6328_CPU_ID:
 	case BCM6338_CPU_ID:
 	case BCM6345_CPU_ID:
@@ -42,6 +42,7 @@ void __init bcm63xx_nvram_init(void *addr)
 {
 	unsigned int check_len;
 	u32 crc, expected_crc;
+	u8 hcs_mac_addr[ETH_ALEN] = { 0x00, 0x10, 0x18, 0xff, 0xff, 0xff };

 	/* extract nvram data */
 	memcpy(&nvram, addr, sizeof(nvram));
@@ -62,6 +63,15 @@ void __init bcm63xx_nvram_init(void *addr)
 	if (crc != expected_crc)
 		pr_warn("nvram checksum failed, contents may be invalid (expected %08x, got %08x)\n",
 			expected_crc, crc);
+
+	/* Cable modems have a different NVRAM which is embedded in the eCos
+	 * firmware and not easily extractible, give at least a MAC address
+	 * pool.
+	 */
+	if (BCMCPU_IS_3368()) {
+		memcpy(nvram.mac_addr_base, hcs_mac_addr, ETH_ALEN);
+		nvram.mac_addr_count = 2;
+	}
 }

 u8 *bcm63xx_nvram_get_name(void)
@@ -8,7 +8,11 @@

 #include <linux/init.h>
 #include <linux/bootmem.h>
+#include <linux/smp.h>
 #include <asm/bootinfo.h>
+#include <asm/bmips.h>
+#include <asm/smp-ops.h>
+#include <asm/mipsregs.h>
 #include <bcm63xx_board.h>
 #include <bcm63xx_cpu.h>
 #include <bcm63xx_io.h>
@@ -26,7 +30,9 @@ void __init prom_init(void)
 	bcm_wdt_writel(WDT_STOP_2, WDT_CTL_REG);

 	/* disable all hardware blocks clock for now */
-	if (BCMCPU_IS_6328())
+	if (BCMCPU_IS_3368())
+		mask = CKCTL_3368_ALL_SAFE_EN;
+	else if (BCMCPU_IS_6328())
 		mask = CKCTL_6328_ALL_SAFE_EN;
 	else if (BCMCPU_IS_6338())
 		mask = CKCTL_6338_ALL_SAFE_EN;
@@ -52,6 +58,47 @@ void __init prom_init(void)

 	/* do low level board init */
 	board_prom_init();
+
+	if (IS_ENABLED(CONFIG_CPU_BMIPS4350) && IS_ENABLED(CONFIG_SMP)) {
+		/* set up SMP */
+		register_smp_ops(&bmips_smp_ops);
+
+		/*
+		 * BCM6328 might not have its second CPU enabled, while BCM6358
+		 * needs special handling for its shared TLB, so disable SMP
+		 * for now.
+		 */
+		if (BCMCPU_IS_6328()) {
+			reg = bcm_readl(BCM_6328_OTP_BASE +
+					OTP_USER_BITS_6328_REG(3));
+
+			if (reg & OTP_6328_REG3_TP1_DISABLED)
+				bmips_smp_enabled = 0;
+		} else if (BCMCPU_IS_6358()) {
+			bmips_smp_enabled = 0;
+		}
+
+		if (!bmips_smp_enabled)
+			return;
+
+		/*
+		 * The bootloader has set up the CPU1 reset vector at
+		 * 0xa000_0200.
+		 * This conflicts with the special interrupt vector (IV).
+		 * The bootloader has also set up CPU1 to respond to the wrong
+		 * IPI interrupt.
+		 * Here we will start up CPU1 in the background and ask it to
+		 * reconfigure itself then go back to sleep.
+		 */
+		memcpy((void *)0xa0000200, &bmips_smp_movevec, 0x20);
+		__sync();
+		set_c0_cause(C_SW0);
+		cpumask_set_cpu(1, &bmips_booted_mask);
+
+		/*
+		 * FIXME: we really should have some sort of hazard barrier here
+		 */
+	}
 }

 void __init prom_free_prom_memory(void)
@@ -30,6 +30,19 @@
 	[BCM63XX_RESET_PCIE]		= BCM## __cpu ##_RESET_PCIE,	\
 	[BCM63XX_RESET_PCIE_EXT]	= BCM## __cpu ##_RESET_PCIE_EXT,

+#define BCM3368_RESET_SPI	SOFTRESET_3368_SPI_MASK
+#define BCM3368_RESET_ENET	SOFTRESET_3368_ENET_MASK
+#define BCM3368_RESET_USBH	0
+#define BCM3368_RESET_USBD	SOFTRESET_3368_USBS_MASK
+#define BCM3368_RESET_DSL	0
+#define BCM3368_RESET_SAR	0
+#define BCM3368_RESET_EPHY	SOFTRESET_3368_EPHY_MASK
+#define BCM3368_RESET_ENETSW	0
+#define BCM3368_RESET_PCM	SOFTRESET_3368_PCM_MASK
+#define BCM3368_RESET_MPI	SOFTRESET_3368_MPI_MASK
+#define BCM3368_RESET_PCIE	0
+#define BCM3368_RESET_PCIE_EXT	0
+
 #define BCM6328_RESET_SPI	SOFTRESET_6328_SPI_MASK
 #define BCM6328_RESET_ENET	0
 #define BCM6328_RESET_USBH	SOFTRESET_6328_USBH_MASK
@@ -117,6 +130,10 @@
 /*
 * core reset bits
 */
+static const u32 bcm3368_reset_bits[] = {
+	__GEN_RESET_BITS_TABLE(3368)
+};
+
 static const u32 bcm6328_reset_bits[] = {
 	__GEN_RESET_BITS_TABLE(6328)
 };
@@ -146,7 +163,10 @@ static int reset_reg;

 static int __init bcm63xx_reset_bits_init(void)
 {
-	if (BCMCPU_IS_6328()) {
+	if (BCMCPU_IS_3368()) {
+		reset_reg = PERF_SOFTRESET_6358_REG;
+		bcm63xx_reset_bits = bcm3368_reset_bits;
+	} else if (BCMCPU_IS_6328()) {
 		reset_reg = PERF_SOFTRESET_6328_REG;
 		bcm63xx_reset_bits = bcm6328_reset_bits;
 	} else if (BCMCPU_IS_6338()) {
@@ -170,6 +190,13 @@ static int __init bcm63xx_reset_bits_init(void)
 }
 #else

+#ifdef CONFIG_BCM63XX_CPU_3368
+static const u32 bcm63xx_reset_bits[] = {
+	__GEN_RESET_BITS_TABLE(3368)
+};
+#define reset_reg PERF_SOFTRESET_6358_REG
+#endif
+
 #ifdef CONFIG_BCM63XX_CPU_6328
 static const u32 bcm63xx_reset_bits[] = {
 	__GEN_RESET_BITS_TABLE(6328)
@@ -68,6 +68,9 @@ void bcm63xx_machine_reboot(void)

 	/* mask and clear all external irq */
 	switch (bcm63xx_get_cpu_id()) {
+	case BCM3368_CPU_ID:
+		perf_regs[0] = PERF_EXTIRQ_CFG_REG_3368;
+		break;
 	case BCM6328_CPU_ID:
 		perf_regs[0] = PERF_EXTIRQ_CFG_REG_6328;
 		break;
@@ -18,6 +18,8 @@ BOOT_HEAP_SIZE := 0x400000
 # Disable Function Tracer
 KBUILD_CFLAGS := $(shell echo $(KBUILD_CFLAGS) | sed -e "s/-pg//")

+KBUILD_CFLAGS := $(filter-out -fstack-protector, $(KBUILD_CFLAGS))
+
 KBUILD_CFLAGS := $(LINUXINCLUDE) $(KBUILD_CFLAGS) -D__KERNEL__ \
 	-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) -D"VMLINUX_LOAD_ADDRESS_ULL=$(VMLINUX_LOAD_ADDRESS)ull"

@@ -23,23 +23,39 @@
 #define PORT(offset) (UART0_BASE + (4 * offset))
 #endif

+#ifdef CONFIG_CPU_XLR
+#define UART0_BASE  0x1EF14000
+#define PORT(offset) (CKSEG1ADDR(UART0_BASE) + (4 * offset))
+#define IOTYPE unsigned int
+#endif
+
+#ifdef CONFIG_CPU_XLP
+#define UART0_BASE  0x18030100
+#define PORT(offset) (CKSEG1ADDR(UART0_BASE) + (4 * offset))
+#define IOTYPE unsigned int
+#endif
+
+#ifndef IOTYPE
+#define IOTYPE char
+#endif
+
 #ifndef PORT
 #error please define the serial port address for your own machine
 #endif

 static inline unsigned int serial_in(int offset)
 {
-	return *((char *)PORT(offset));
+	return *((volatile IOTYPE *)PORT(offset)) & 0xFF;
 }

 static inline void serial_out(int offset, int value)
 {
-	*((char *)PORT(offset)) = value;
+	*((volatile IOTYPE *)PORT(offset)) = value & 0xFF;
 }

 void putc(char c)
 {
-	int timeout = 1024;
+	int timeout = 1000000;

 	while (((serial_in(UART_LSR) & UART_LSR_THRE) == 0) && (timeout-- > 0))
 		;
@@ -10,6 +10,10 @@ config CAVIUM_CN63XXP1
 	  non-CN63XXP1 hardware, so it is recommended to select "n"
 	  unless it is known the workarounds are needed.

+endif # CPU_CAVIUM_OCTEON
+
+if CAVIUM_OCTEON_SOC
+
 config CAVIUM_OCTEON_2ND_KERNEL
 	bool "Build the kernel to be used as a 2nd kernel on the same chip"
 	default "n"
@@ -19,17 +23,6 @@ config CAVIUM_OCTEON_2ND_KERNEL
 	  with this option to be run at the same time as one built without this
 	  option.

-config CAVIUM_OCTEON_HW_FIX_UNALIGNED
-	bool "Enable hardware fixups of unaligned loads and stores"
-	default "y"
-	help
-	  Configure the Octeon hardware to automatically fix unaligned loads
-	  and stores. Normally unaligned accesses are fixed using a kernel
-	  exception handler. This option enables the hardware automatic fixups,
-	  which requires only an extra 3 cycles. Disable this option if you
-	  are running code that relies on address exceptions on unaligned
-	  accesses.
-
 config CAVIUM_OCTEON_CVMSEG_SIZE
 	int "Number of L1 cache lines reserved for CVMSEG memory"
 	range 0 54
@@ -103,4 +96,4 @@ config OCTEON_ILM
 	  To compile this driver as a module, choose M here.  The module
 	  will be called octeon-ilm

-endif # CPU_CAVIUM_OCTEON
+endif # CAVIUM_OCTEON_SOC
@@ -12,11 +12,12 @@
 CFLAGS_octeon-platform.o = -I$(src)/../../../scripts/dtc/libfdt
 CFLAGS_setup.o = -I$(src)/../../../scripts/dtc/libfdt

-obj-y := cpu.o setup.o serial.o octeon-platform.o octeon-irq.o csrc-octeon.o
-obj-y += dma-octeon.o flash_setup.o
+obj-y := cpu.o setup.o octeon-platform.o octeon-irq.o csrc-octeon.o
+obj-y += dma-octeon.o
 obj-y += octeon-memcpy.o
 obj-y += executive/

+obj-$(CONFIG_MTD)		      += flash_setup.o
 obj-$(CONFIG_SMP)		      += smp.o
 obj-$(CONFIG_OCTEON_ILM)	      += oct_ilm.o

--- a/Show More
+++ b/Show More