Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: eHEA: Fix bonding support Blackfin ethernet driver: on chip ethernet MAC controller driver fix wrong argument of tc35815_read_plat_dev_addr() ARM/ETHER3: Handle multicast frames. SAA9730: Handle multicast frames. NI5010: Handle multicast frames. NS83820: Handle multicast frames. Fix RGMII-ID handling in gianfar Fix Vitesse RGMII-ID support Add phy-connection-type to gianfar nodes Fix Vitesse 824x PHY interrupt acking [PATCH] zd1211rw: Add ID for Siemens Gigaset USB Stick 54 [PATCH] zd1211rw: Add ID for Planex GW-US54GXS [PATCH] Update version ipw2200 stamp to 1.2.2 [PATCH] ipw2200: Fix ipw_isr() comments error on shared IRQ [PATCH] Fix ipw2200 set wrong power parameter causing firmware error [PATCH] ipw2100: Fix `iwpriv set_power` error [PATCH] softmac: Channel is listed twice in scan output
2026-05-01 15:00:59 -07:00 · 2007-07-18 18:33:45 -07:00
parent 789c56b7f7 f9e29228e6
commit ce524c8360
22 changed files with 1308 additions and 56 deletions
@@ -838,6 +838,50 @@ config ULTRA32
 	  <file:Documentation/networking/net-modules.txt>. The module
 	  will be called smc-ultra32.

+config BFIN_MAC
+	tristate "Blackfin 536/537 on-chip mac support"
+	depends on NET_ETHERNET && (BF537 || BF536) && (!BF537_PORT_H)
+	select CRC32
+	select BFIN_MAC_USE_L1 if DMA_UNCACHED_NONE
+	help
+	  This is the driver for blackfin on-chip mac device. Say Y if you want it
+	  compiled into the kernel. This driver is also available as a module
+	  ( = code which can be inserted in and removed from the running kernel
+	  whenever you want). The module will be called bfin_mac.
+
+config BFIN_MAC_USE_L1
+	bool "Use L1 memory for rx/tx packets"
+	depends on BFIN_MAC && BF537
+	default y
+	help
+	  To get maximum network performace, you should use L1 memory as rx/tx buffers.
+	  Say N here if you want to reserve L1 memory for other uses.
+
+config BFIN_TX_DESC_NUM
+	int "Number of transmit buffer packets"
+	depends on BFIN_MAC
+	range 6 10 if BFIN_MAC_USE_L1
+	range 10 100
+	default "10"
+	help
+	  Set the number of buffer packets used in driver.
+
+config BFIN_RX_DESC_NUM
+	int "Number of receive buffer packets"
+	depends on BFIN_MAC
+	range 20 100 if BFIN_MAC_USE_L1
+	range 20 800
+	default "20"
+	help
+	  Set the number of buffer packets used in driver.
+
+config BFIN_MAC_RMII
+	bool "RMII PHY Interface (EXPERIMENTAL)"
+	depends on BFIN_MAC && EXPERIMENTAL
+	default n
+	help
+	  Use Reduced PHY MII Interface
+
 config SMC9194
 	tristate "SMC 9194 support"
 	depends on NET_VENDOR_SMC && (ISA || MAC && BROKEN)
@@ -200,6 +200,7 @@ obj-$(CONFIG_S2IO) += s2io.o
 obj-$(CONFIG_MYRI10GE) += myri10ge/
 obj-$(CONFIG_SMC91X) += smc91x.o
 obj-$(CONFIG_SMC911X) += smc911x.o
+obj-$(CONFIG_BFIN_MAC) += bfin_mac.o
 obj-$(CONFIG_DM9000) += dm9000.o
 obj-$(CONFIG_FEC_8XX) += fec_8xx/
 obj-$(CONFIG_PASEMI_MAC) += pasemi_mac.o
@@ -464,7 +464,7 @@ static void ether3_setmulticastlist(struct net_device *dev)
 	if (dev->flags & IFF_PROMISC) {
 		/* promiscuous mode */
 		priv(dev)->regs.config1 |= CFG1_RECVPROMISC;
-	} else if (dev->flags & IFF_ALLMULTI) {
+	} else if (dev->flags & IFF_ALLMULTI || dev->mc_count) {
 		priv(dev)->regs.config1 |= CFG1_RECVSPECBRMULTI;
 	} else
 		priv(dev)->regs.config1 |= CFG1_RECVSPECBROAD;
@@ -0,0 +1,132 @@
+/*
+ * File:	drivers/net/bfin_mac.c
+ * Based on:
+ * Maintainer:
+ * 		Bryan Wu <bryan.wu@analog.com>
+ *
+ * Original author:
+ * 		Luke Yang <luke.yang@analog.com>
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ *		Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs:	Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software ;  you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation ;  either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY ;  without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program ;  see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ * PHY REGISTER NAMES
+ */
+#define PHYREG_MODECTL		0x0000
+#define PHYREG_MODESTAT		0x0001
+#define PHYREG_PHYID1		0x0002
+#define PHYREG_PHYID2		0x0003
+#define PHYREG_ANAR		0x0004
+#define PHYREG_ANLPAR		0x0005
+#define PHYREG_ANER		0x0006
+#define PHYREG_NSR		0x0010
+#define PHYREG_LBREMR		0x0011
+#define PHYREG_REC		0x0012
+#define PHYREG_10CFG		0x0013
+#define PHYREG_PHY1_1		0x0014
+#define PHYREG_PHY1_2		0x0015
+#define PHYREG_PHY2		0x0016
+#define PHYREG_TW_1		0x0017
+#define PHYREG_TW_2		0x0018
+#define PHYREG_TEST		0x0019
+
+#define PHY_RESET		0x8000
+#define PHY_ANEG_EN		0x1000
+#define PHY_DUPLEX		0x0100
+#define PHY_SPD_SET		0x2000
+
+#define BFIN_MAC_CSUM_OFFLOAD
+
+struct dma_descriptor {
+	struct dma_descriptor *next_dma_desc;
+	unsigned long start_addr;
+	unsigned short config;
+	unsigned short x_count;
+};
+
+struct status_area_rx {
+#if defined(BFIN_MAC_CSUM_OFFLOAD)
+	unsigned short ip_hdr_csum;	/* ip header checksum */
+	/* ip payload(udp or tcp or others) checksum */
+	unsigned short ip_payload_csum;
+#endif
+	unsigned long status_word;	/* the frame status word */
+};
+
+struct status_area_tx {
+	unsigned long status_word;	/* the frame status word */
+};
+
+/* use two descriptors for a packet */
+struct net_dma_desc_rx {
+	struct net_dma_desc_rx *next;
+	struct sk_buff *skb;
+	struct dma_descriptor desc_a;
+	struct dma_descriptor desc_b;
+	struct status_area_rx status;
+};
+
+/* use two descriptors for a packet */
+struct net_dma_desc_tx {
+	struct net_dma_desc_tx *next;
+	struct sk_buff *skb;
+	struct dma_descriptor desc_a;
+	struct dma_descriptor desc_b;
+	unsigned char packet[1560];
+	struct status_area_tx status;
+};
+
+struct bf537mac_local {
+	/*
+	 * these are things that the kernel wants me to keep, so users
+	 * can find out semi-useless statistics of how well the card is
+	 * performing
+	 */
+	struct net_device_stats stats;
+
+	int version;
+
+	int FlowEnabled;	/* record if data flow is active */
+	int EtherIntIVG;	/* IVG for the ethernet interrupt */
+	int RXIVG;		/* IVG for the RX completion */
+	int TXIVG;		/* IVG for the TX completion */
+	int PhyAddr;		/* PHY address */
+	int OpMode;		/* set these bits n the OPMODE regs */
+	int Port10;		/* set port speed to 10 Mbit/s */
+	int GenChksums;		/* IP checksums to be calculated */
+	int NoRcveLnth;		/* dont insert recv length at start of buffer */
+	int StripPads;		/* remove trailing pad bytes */
+	int FullDuplex;		/* set full duplex mode */
+	int Negotiate;		/* enable auto negotiation */
+	int Loopback;		/* loopback at the PHY */
+	int Cache;		/* Buffers may be cached */
+	int FlowControl;	/* flow control active */
+	int CLKIN;		/* clock in value in MHZ */
+	unsigned short IntMask;	/* interrupt mask */
+	unsigned char Mac[6];	/* MAC address of the board */
+	spinlock_t lock;
+};
+
+extern void get_bf537_ether_addr(char *addr);
@@ -39,7 +39,7 @@
 #include <asm/io.h>

 #define DRV_NAME	"ehea"
-#define DRV_VERSION	"EHEA_0070"
+#define DRV_VERSION	"EHEA_0071"

 /* eHEA capability flags */
 #define DLPAR_PORT_ADD_REM 1
@@ -466,6 +466,8 @@ static struct ehea_cqe *ehea_proc_rwqes(struct net_device *dev,
 							 cqe->vlan_tag);
 			else
 				netif_receive_skb(skb);
+
+			dev->last_rx = jiffies;
 		} else {
 			pr->p_stats.poll_receive_errors++;
 			port_reset = ehea_treat_poll_error(pr, rq, cqe,
@@ -1433,7 +1435,8 @@ static int ehea_broadcast_reg_helper(struct ehea_port *port, u32 hcallid)
 				     port->logical_port_id,
 				     reg_type, port->mac_addr, 0, hcallid);
 	if (hret != H_SUCCESS) {
-		ehea_error("reg_dereg_bcmc failed (tagged)");
+		ehea_error("%sregistering bc address failed (tagged)",
+                           hcallid == H_REG_BCMC ? "" : "de");
 		ret = -EIO;
 		goto out_herr;
 	}
@@ -1444,7 +1447,8 @@ static int ehea_broadcast_reg_helper(struct ehea_port *port, u32 hcallid)
 				     port->logical_port_id,
 				     reg_type, port->mac_addr, 0, hcallid);
 	if (hret != H_SUCCESS) {
-		ehea_error("reg_dereg_bcmc failed (vlan)");
+		ehea_error("%sregistering bc address failed (vlan)",
+			   hcallid == H_REG_BCMC ? "" : "de");
 		ret = -EIO;
 	}
 out_herr:
@@ -2170,7 +2174,6 @@ static int ehea_up(struct net_device *dev)
 {
 	int ret, i;
 	struct ehea_port *port = netdev_priv(dev);
-	u64 mac_addr = 0;

 	if (port->state == EHEA_PORT_UP)
 		return 0;
@@ -2189,18 +2192,10 @@ static int ehea_up(struct net_device *dev)
 		goto out_clean_pr;
 	}

-	ret = ehea_broadcast_reg_helper(port, H_REG_BCMC);
-	if (ret) {
-		ret = -EIO;
-		ehea_error("out_clean_pr");
-		goto out_clean_pr;
-	}
-	mac_addr = (*(u64*)dev->dev_addr) >> 16;
-
 	ret = ehea_reg_interrupts(dev);
 	if (ret) {
-		ehea_error("out_dereg_bc");
-		goto out_dereg_bc;
+		ehea_error("reg_interrupts failed. ret:%d", ret);
+		goto out_clean_pr;
 	}

 	for(i = 0; i < port->num_def_qps + port->num_add_tx_qps; i++) {
@@ -2226,9 +2221,6 @@ static int ehea_up(struct net_device *dev)
 out_free_irqs:
 	ehea_free_interrupts(dev);

-out_dereg_bc:
-	ehea_broadcast_reg_helper(port, H_DEREG_BCMC);
-
 out_clean_pr:
 	ehea_clean_all_portres(port);
 out:
@@ -2273,7 +2265,6 @@ static int ehea_down(struct net_device *dev)
 				&port->port_res[i].d_netdev->state))
 			msleep(1);

-	ehea_broadcast_reg_helper(port, H_DEREG_BCMC);
 	port->state = EHEA_PORT_DOWN;

 	ret = ehea_clean_all_portres(port);
@@ -2655,12 +2646,18 @@ struct ehea_port *ehea_setup_single_port(struct ehea_adapter *adapter,

 	INIT_WORK(&port->reset_task, ehea_reset_port);

+	ret = ehea_broadcast_reg_helper(port, H_REG_BCMC);
+	if (ret) {
+		ret = -EIO;
+		goto out_unreg_port;
+	}
+
 	ehea_set_ethtool_ops(dev);

 	ret = register_netdev(dev);
 	if (ret) {
 		ehea_error("register_netdev failed. ret=%d", ret);
-		goto out_unreg_port;
+		goto out_dereg_bc;
 	}

 	ret = ehea_get_jumboframe_status(port, &jumbo);
@@ -2675,6 +2672,9 @@ struct ehea_port *ehea_setup_single_port(struct ehea_adapter *adapter,

 	return port;

+out_dereg_bc:
+	ehea_broadcast_reg_helper(port, H_DEREG_BCMC);
+
 out_unreg_port:
 	ehea_unregister_port(port);

@@ -2694,6 +2694,7 @@ static void ehea_shutdown_single_port(struct ehea_port *port)
 {
 	unregister_netdev(port->netdev);
 	ehea_unregister_port(port);
+	ehea_broadcast_reg_helper(port, H_DEREG_BCMC);
 	kfree(port->mc_list);
 	free_netdev(port->netdev);
 	port->adapter->active_ports--;
@@ -420,8 +420,18 @@ static phy_interface_t gfar_get_interface(struct net_device *dev)
 	if (ecntrl & ECNTRL_REDUCED_MODE) {
 		if (ecntrl & ECNTRL_REDUCED_MII_MODE)
 			return PHY_INTERFACE_MODE_RMII;
-		else
+		else {
+			phy_interface_t interface = priv->einfo->interface;
+
+			/*
+			 * This isn't autodetected right now, so it must
+			 * be set by the device tree or platform code.
+			 */
+			if (interface == PHY_INTERFACE_MODE_RGMII_ID)
+				return PHY_INTERFACE_MODE_RGMII_ID;
+
 			return PHY_INTERFACE_MODE_RGMII;
+		}
 	}

 	if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT)
@@ -670,14 +670,10 @@ static void ni5010_set_multicast_list(struct net_device *dev)

 	PRINTK2((KERN_DEBUG "%s: entering set_multicast_list\n", dev->name));

-	if (dev->flags&IFF_PROMISC || dev->flags&IFF_ALLMULTI) {
+	if (dev->flags&IFF_PROMISC || dev->flags&IFF_ALLMULTI || dev->mc_list) {
 		dev->flags |= IFF_PROMISC;
 		outb(RMD_PROMISC, EDLC_RMODE); /* Enable promiscuous mode */
 		PRINTK((KERN_DEBUG "%s: Entering promiscuous mode\n", dev->name));
-	} else if (dev->mc_list) {
-		/* Sorry, multicast not supported */
-		PRINTK((KERN_DEBUG "%s: No multicast, entering broadcast mode\n", dev->name));
-		outb(RMD_BROADCAST, EDLC_RMODE);
 	} else {
 		PRINTK((KERN_DEBUG "%s: Entering broadcast mode\n", dev->name));
 		outb(RMD_BROADCAST, EDLC_RMODE);  /* Disable promiscuous mode, use normal mode */
@@ -1582,7 +1582,7 @@ static void ns83820_set_multicast(struct net_device *ndev)
 	else
 		and_mask &= ~(RFCR_AAU | RFCR_AAM);

-	if (ndev->flags & IFF_ALLMULTI)
+	if (ndev->flags & IFF_ALLMULTI || ndev->mc_count)
 		or_mask |= RFCR_AAM;
 	else
 		and_mask &= ~RFCR_AAM;
@@ -21,6 +21,10 @@
 /* Vitesse Extended Control Register 1 */
 #define MII_VSC8244_EXT_CON1           0x17
 #define MII_VSC8244_EXTCON1_INIT       0x0000
+#define MII_VSC8244_EXTCON1_TX_SKEW_MASK	0x0c00
+#define MII_VSC8244_EXTCON1_RX_SKEW_MASK	0x0300
+#define MII_VSC8244_EXTCON1_TX_SKEW	0x0800
+#define MII_VSC8244_EXTCON1_RX_SKEW	0x0200

 /* Vitesse Interrupt Mask Register */
 #define MII_VSC8244_IMASK		0x19
@@ -39,7 +43,7 @@

 /* Vitesse Auxiliary Control/Status Register */
 #define MII_VSC8244_AUX_CONSTAT        	0x1c
-#define MII_VSC8244_AUXCONSTAT_INIT    	0x0004
+#define MII_VSC8244_AUXCONSTAT_INIT    	0x0000
 #define MII_VSC8244_AUXCONSTAT_DUPLEX  	0x0020
 #define MII_VSC8244_AUXCONSTAT_SPEED   	0x0018
 #define MII_VSC8244_AUXCONSTAT_GBIT    	0x0010
@@ -51,6 +55,7 @@ MODULE_LICENSE("GPL");

 static int vsc824x_config_init(struct phy_device *phydev)
 {
+	int extcon;
 	int err;

 	err = phy_write(phydev, MII_VSC8244_AUX_CONSTAT,
@@ -58,14 +63,34 @@ static int vsc824x_config_init(struct phy_device *phydev)
 	if (err < 0)
 		return err;

-	err = phy_write(phydev, MII_VSC8244_EXT_CON1,
-			MII_VSC8244_EXTCON1_INIT);
+	extcon = phy_read(phydev, MII_VSC8244_EXT_CON1);
+
+	if (extcon < 0)
+		return err;
+
+	extcon &= ~(MII_VSC8244_EXTCON1_TX_SKEW_MASK |
+			MII_VSC8244_EXTCON1_RX_SKEW_MASK);
+
+	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
+		extcon |= (MII_VSC8244_EXTCON1_TX_SKEW |
+				MII_VSC8244_EXTCON1_RX_SKEW);
+
+	err = phy_write(phydev, MII_VSC8244_EXT_CON1, extcon);
+
 	return err;
 }

 static int vsc824x_ack_interrupt(struct phy_device *phydev)
 {
-	int err = phy_read(phydev, MII_VSC8244_ISTAT);
+	int err = 0;
+	
+	/*
+	 * Don't bother to ACK the interrupts if interrupts
+	 * are disabled.  The 824x cannot clear the interrupts
+	 * if they are disabled.
+	 */
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+		err = phy_read(phydev, MII_VSC8244_ISTAT);

 	return (err < 0) ? err : 0;
 }
@@ -77,8 +102,19 @@ static int vsc824x_config_intr(struct phy_device *phydev)
 	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
 		err = phy_write(phydev, MII_VSC8244_IMASK,
 				MII_VSC8244_IMASK_MASK);
-	else
+	else {
+		/*
+		 * The Vitesse PHY cannot clear the interrupt
+		 * once it has disabled them, so we clear them first
+		 */
+		err = phy_read(phydev, MII_VSC8244_ISTAT);
+
+		if (err)
+			return err;
+
 		err = phy_write(phydev, MII_VSC8244_IMASK, 0);
+	}
+
 	return err;
 }

@@ -940,15 +940,14 @@ static void lan_saa9730_set_multicast(struct net_device *dev)
 		       CAM_CONTROL_GROUP_ACC | CAM_CONTROL_BROAD_ACC,
 		       &lp->lan_saa9730_regs->CamCtl);
 	} else {
-		if (dev->flags & IFF_ALLMULTI) {
+		if (dev->flags & IFF_ALLMULTI || dev->mc_count) {
 			/* accept all multicast packets */
-			writel(CAM_CONTROL_COMP_EN | CAM_CONTROL_GROUP_ACC |
-			       CAM_CONTROL_BROAD_ACC,
-			       &lp->lan_saa9730_regs->CamCtl);
-		} else {
 			/*
 			 * Will handle the multicast stuff later. -carstenl
 			 */
+			writel(CAM_CONTROL_COMP_EN | CAM_CONTROL_GROUP_ACC |
+			       CAM_CONTROL_BROAD_ACC,
+			       &lp->lan_saa9730_regs->CamCtl);
 		}
 	}

@@ -626,7 +626,7 @@ static int __devinit tc35815_read_plat_dev_addr(struct net_device *dev)
 	return -ENODEV;
 }
 #else
-static int __devinit tc35815_read_plat_dev_addr(struct device *dev)
+static int __devinit tc35815_read_plat_dev_addr(struct net_device *dev)
 {
 	return -ENODEV;
 }
@@ -7868,10 +7868,10 @@ static int ipw2100_wx_set_powermode(struct net_device *dev,
 		goto done;
 	}

-	if ((mode < 1) || (mode > POWER_MODES))
+	if ((mode < 0) || (mode > POWER_MODES))
 		mode = IPW_POWER_AUTO;

-	if (priv->power_mode != mode)
+	if (IPW_POWER_LEVEL(priv->power_mode) != mode)
 		err = ipw2100_set_power_mode(priv, mode);
      done:
 	mutex_unlock(&priv->action_mutex);
@@ -7902,7 +7902,7 @@ static int ipw2100_wx_get_powermode(struct net_device *dev,
 			break;
 		case IPW_POWER_AUTO:
 			snprintf(extra, MAX_POWER_STRING,
-				 "Power save level: %d (Auto)", 0);
+				 "Power save level: %d (Auto)", level);
 			break;
 		default:
 			timeout = timeout_duration[level - 1] / 1000;
@@ -70,7 +70,7 @@
 #define VQ
 #endif

-#define IPW2200_VERSION "1.2.0" VK VD VM VP VR VQ
+#define IPW2200_VERSION "1.2.2" VK VD VM VP VR VQ
 #define DRV_DESCRIPTION	"Intel(R) PRO/Wireless 2200/2915 Network Driver"
 #define DRV_COPYRIGHT	"Copyright(c) 2003-2006 Intel Corporation"
 #define DRV_VERSION     IPW2200_VERSION
@@ -2506,7 +2506,7 @@ static int ipw_send_power_mode(struct ipw_priv *priv, u32 mode)
 		break;
 	}

-	param = cpu_to_le32(mode);
+	param = cpu_to_le32(param);
 	return ipw_send_cmd_pdu(priv, IPW_CMD_POWER_MODE, sizeof(param),
 				&param);
 }
@@ -9568,6 +9568,7 @@ static int ipw_wx_set_power(struct net_device *dev,
 		priv->power_mode = IPW_POWER_ENABLED | IPW_POWER_BATTERY;
 	else
 		priv->power_mode = IPW_POWER_ENABLED | priv->power_mode;
+
 	err = ipw_send_power_mode(priv, IPW_POWER_LEVEL(priv->power_mode));
 	if (err) {
 		IPW_DEBUG_WX("failed setting power mode.\n");
@@ -9604,22 +9605,19 @@ static int ipw_wx_set_powermode(struct net_device *dev,
 	struct ipw_priv *priv = ieee80211_priv(dev);
 	int mode = *(int *)extra;
 	int err;
+
 	mutex_lock(&priv->mutex);
-	if ((mode < 1) || (mode > IPW_POWER_LIMIT)) {
+	if ((mode < 1) || (mode > IPW_POWER_LIMIT))
 		mode = IPW_POWER_AC;
-		priv->power_mode = mode;
-	} else {
-		priv->power_mode = IPW_POWER_ENABLED | mode;
-	}

-	if (priv->power_mode != mode) {
+	if (IPW_POWER_LEVEL(priv->power_mode) != mode) {
 		err = ipw_send_power_mode(priv, mode);
-
 		if (err) {
 			IPW_DEBUG_WX("failed setting power mode.\n");
 			mutex_unlock(&priv->mutex);
 			return err;
 		}
+		priv->power_mode = IPW_POWER_ENABLED | mode;
 	}
 	mutex_unlock(&priv->mutex);
 	return 0;
@@ -10555,7 +10553,7 @@ static irqreturn_t ipw_isr(int irq, void *data)
 	spin_lock(&priv->irq_lock);

 	if (!(priv->status & STATUS_INT_ENABLED)) {
-		/* Shared IRQ */
+		/* IRQ is disabled */
 		goto none;
 	}

@@ -72,6 +72,8 @@ static struct usb_device_id usb_ids[] = {
 	{ USB_DEVICE(0x0586, 0x3413), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x0053, 0x5301), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x0411, 0x00da), .driver_info = DEVICE_ZD1211B },
+	{ USB_DEVICE(0x2019, 0x5303), .driver_info = DEVICE_ZD1211B },
+	{ USB_DEVICE(0x129b, 0x1667), .driver_info = DEVICE_ZD1211B },
 	/* "Driverless" devices that need ejecting */
 	{ USB_DEVICE(0x0ace, 0x2011), .driver_info = DEVICE_INSTALLER },
 	{ USB_DEVICE(0x0ace, 0x20ff), .driver_info = DEVICE_INSTALLER },