Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc

* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (29 commits)
  [POWERPC] Fix rheap alignment problem
  [POWERPC] Use check_legacy_ioport() for ISAPnP
  [POWERPC] Avoid NULL pointer in gpio1_interrupt
  [POWERPC] Enable generic rtc hook for the MPC8349 mITX
  [POWERPC] Add powerpc get/set_rtc_time interface to new generic rtc class
  [POWERPC] Create a "wrapper" script and use it in arch/powerpc/boot
  [POWERPC] fix spin lock nesting in hvc_iseries
  [POWERPC] EEH failure to mark pci slot as frozen.
  [POWERPC] update powerpc defconfig files after libata kconfig breakage
  [POWERPC] enable sysrq in pmac32_defconfig
  [POWERPC] UPIO_TSI cleanup
  [POWERPC] rewrite mkprep and mkbugboot in sane C
  [POWERPC] maple/pci iomem annotations
  [POWERPC] powerpc oprofile __user annotations
  [POWERPC] cell spufs iomem annotations
  [POWERPC] NULL noise removal: spufs
  [POWERPC] ppc math-emu needs -fno-builtin-fabs for math.c and fabs.c
  [POWERPC] update mpc8349_itx_defconfig and remove some debug settings
  [POWERPC] Always call cede in pseries dedicated idle loop
  [POWERPC] Fix loop logic in irq_alloc_virt()
  ...

include/asm-ppc/cpm2.h

@@ -42,6 +42,8 @@
 #define CPM_CR_IDMA4_SBLOCK	(0x17)
 #define CPM_CR_MCC1_SBLOCK	(0x1c)
 
+#define CPM_CR_FCC_SBLOCK(x)	(x + 0x10)
+
 #define CPM_CR_SCC1_PAGE	(0x00)
 #define CPM_CR_SCC2_PAGE	(0x01)
 #define CPM_CR_SCC3_PAGE	(0x02)
@@ -62,6 +64,8 @@
 #define CPM_CR_MCC1_PAGE	(0x07)
 #define CPM_CR_MCC2_PAGE	(0x08)
 
+#define CPM_CR_FCC_PAGE(x)	(x + 0x04)
+
 /* Some opcodes (there are more...later)
 */
 #define CPM_CR_INIT_TRX		((ushort)0x0000)
@@ -173,6 +177,10 @@ typedef struct cpm_buf_desc {
 #define PROFF_I2C_BASE		((uint)0x8afc)
 #define PROFF_IDMA4_BASE	((uint)0x8afe)
 
+#define PROFF_SCC_SIZE		((uint)0x100)
+#define PROFF_FCC_SIZE		((uint)0x100)
+#define PROFF_SMC_SIZE		((uint)64)
+
 /* The SMCs are relocated to any of the first eight DPRAM pages.
  * We will fix these at the first locations of DPRAM, until we
  * get some microcode patches :-).
@@ -1186,7 +1194,60 @@ typedef struct im_idma {
 #define FCC_MEM_OFFSET(x) (CPM_FCC_SPECIAL_BASE + (x*128))
 #define FCC1_MEM_OFFSET FCC_MEM_OFFSET(0)
 #define FCC2_MEM_OFFSET FCC_MEM_OFFSET(1)
-#define FCC2_MEM_OFFSET FCC_MEM_OFFSET(2)
+#define FCC3_MEM_OFFSET FCC_MEM_OFFSET(2)
+
+/* Clocks and GRG's */
+
+enum cpm_clk_dir {
+	CPM_CLK_RX,
+	CPM_CLK_TX,
+	CPM_CLK_RTX
+};
+
+enum cpm_clk_target {
+	CPM_CLK_SCC1,
+	CPM_CLK_SCC2,
+	CPM_CLK_SCC3,
+	CPM_CLK_SCC4,
+	CPM_CLK_FCC1,
+	CPM_CLK_FCC2,
+	CPM_CLK_FCC3
+};
+
+enum cpm_clk {
+	CPM_CLK_NONE = 0,
+	CPM_BRG1,	/* Baud Rate Generator  1 */
+	CPM_BRG2,	/* Baud Rate Generator  2 */
+	CPM_BRG3,	/* Baud Rate Generator  3 */
+	CPM_BRG4,	/* Baud Rate Generator  4 */
+	CPM_BRG5,	/* Baud Rate Generator  5 */
+	CPM_BRG6,	/* Baud Rate Generator  6 */
+	CPM_BRG7,	/* Baud Rate Generator  7 */
+	CPM_BRG8,	/* Baud Rate Generator  8 */
+	CPM_CLK1,	/* Clock  1 */
+	CPM_CLK2,	/* Clock  2 */
+	CPM_CLK3,	/* Clock  3 */
+	CPM_CLK4,	/* Clock  4 */
+	CPM_CLK5,	/* Clock  5 */
+	CPM_CLK6,	/* Clock  6 */
+	CPM_CLK7,	/* Clock  7 */
+	CPM_CLK8,	/* Clock  8 */
+	CPM_CLK9,	/* Clock  9 */
+	CPM_CLK10,	/* Clock 10 */
+	CPM_CLK11,	/* Clock 11 */
+	CPM_CLK12,	/* Clock 12 */
+	CPM_CLK13,	/* Clock 13 */
+	CPM_CLK14,	/* Clock 14 */
+	CPM_CLK15,	/* Clock 15 */
+	CPM_CLK16,	/* Clock 16 */
+	CPM_CLK17,	/* Clock 17 */
+	CPM_CLK18,	/* Clock 18 */
+	CPM_CLK19,	/* Clock 19 */
+	CPM_CLK20,	/* Clock 20 */
+	CPM_CLK_DUMMY
+};
+
+extern int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode);
 
 #endif /* __CPM2__ */
 #endif /* __KERNEL__ */

include/asm-ppc/fs_pd.h

@@ -0,0 +1,36 @@
+/*
+ * Platform information definitions.
+ *
+ * 2006 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef FS_PD_H
+#define FS_PD_H
+
+static inline int uart_baudrate(void)
+{
+	int baud;
+	bd_t *bd = (bd_t *) __res;
+
+	if (bd->bi_baudrate)
+		baud = bd->bi_baudrate;
+	else
+		baud = -1;
+	return baud;
+}
+
+static inline int uart_clock(void)
+{
+	return (((bd_t *) __res)->bi_intfreq);
+}
+
+#define cpm2_map(member)	(&cpm2_immr->member)
+#define cpm2_map_size(member, size)	(&cpm2_immr->member)
+#define cpm2_unmap(addr)        do {} while(0)
+
+#endif

include/asm-ppc/rheap.h

@@ -62,6 +62,10 @@ extern int rh_attach_region(rh_info_t * info, void *start, int size);
 /* Detach a free region */
 extern void *rh_detach_region(rh_info_t * info, void *start, int size);
 
+/* Allocate the given size from the remote heap (with alignment) */
+extern void *rh_alloc_align(rh_info_t * info, int size, int alignment,
+		const char *owner);
+
 /* Allocate the given size from the remote heap */
 extern void *rh_alloc(rh_info_t * info, int size, const char *owner);