Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (37 commits)
  smc91c92_cs: fix the problem of "Unable to find hardware address"
  r8169: clean up my printk uglyness
  net: Hook up cxgb4 to Kconfig and Makefile
  cxgb4: Add main driver file and driver Makefile
  cxgb4: Add remaining driver headers and L2T management
  cxgb4: Add packet queues and packet DMA code
  cxgb4: Add HW and FW support code
  cxgb4: Add register, message, and FW definitions
  netlabel: Fix several rcu_dereference() calls used without RCU read locks
  bonding: fix potential deadlock in bond_uninit()
  net: check the length of the socket address passed to connect(2)
  stmmac: add documentation for the driver.
  stmmac: fix kconfig for crc32 build error
  be2net: fix bug in vlan rx path for big endian architecture
  be2net: fix flashing on big endian architectures
  be2net: fix a bug in flashing the redboot section
  bonding: bond_xmit_roundrobin() fix
  drivers/net: Add missing unlock
  net: gianfar - align BD ring size console messages
  net: gianfar - initialize per-queue statistics
  ...

Documentation/networking/stmmac.txt

@@ -0,0 +1,143 @@
+       STMicroelectronics 10/100/1000 Synopsys Ethernet driver
+
+Copyright (C) 2007-2010  STMicroelectronics Ltd
+Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+
+This is the driver for the MAC 10/100/1000 on-chip Ethernet controllers
+(Synopsys IP blocks); it has been fully tested on STLinux platforms.
+
+Currently this network device driver is for all STM embedded MAC/GMAC
+(7xxx SoCs).
+
+DWC Ether MAC 10/100/1000 Universal version 3.41a and DWC Ether MAC 10/100
+Universal version 4.0 have been used for developing the first code
+implementation.
+
+Please, for more information also visit: www.stlinux.com
+
+1) Kernel Configuration
+The kernel configuration option is STMMAC_ETH:
+ Device Drivers ---> Network device support ---> Ethernet (1000 Mbit) --->
+ STMicroelectronics 10/100/1000 Ethernet driver (STMMAC_ETH)
+
+2) Driver parameters list:
+	debug: message level (0: no output, 16: all);
+	phyaddr: to manually provide the physical address to the PHY device;
+	dma_rxsize: DMA rx ring size;
+	dma_txsize: DMA tx ring size;
+	buf_sz: DMA buffer size;
+	tc: control the HW FIFO threshold;
+	tx_coe: Enable/Disable Tx Checksum Offload engine;
+	watchdog: transmit timeout (in milliseconds);
+	flow_ctrl: Flow control ability [on/off];
+	pause: Flow Control Pause Time;
+	tmrate: timer period (only if timer optimisation is configured).
+
+3) Command line options
+Driver parameters can be also passed in command line by using:
+	stmmaceth=dma_rxsize:128,dma_txsize:512
+
+4) Driver information and notes
+
+4.1) Transmit process
+The xmit method is invoked when the kernel needs to transmit a packet; it sets
+the descriptors in the ring and informs the DMA engine that there is a packet
+ready to be transmitted.
+Once the controller has finished transmitting the packet, an interrupt is
+triggered; So the driver will be able to release the socket buffers.
+By default, the driver sets the NETIF_F_SG bit in the features field of the
+net_device structure enabling the scatter/gather feature.
+
+4.2) Receive process
+When one or more packets are received, an interrupt happens. The interrupts
+are not queued so the driver has to scan all the descriptors in the ring during
+the receive process.
+This is based on NAPI so the interrupt handler signals only if there is work to be
+done, and it exits.
+Then the poll method will be scheduled at some future point.
+The incoming packets are stored, by the DMA, in a list of pre-allocated socket
+buffers in order to avoid the memcpy (Zero-copy).
+
+4.3) Timer-Driver Interrupt
+Instead of having the device that asynchronously notifies the frame receptions, the
+driver configures a timer to generate an interrupt at regular intervals.
+Based on the granularity of the timer, the frames that are received by the device
+will experience different levels of latency. Some NICs have dedicated timer
+device to perform this task. STMMAC can use either the RTC device or the TMU
+channel 2  on STLinux platforms.
+The timers frequency can be passed to the driver as parameter; when change it,
+take care of both hardware capability and network stability/performance impact.
+Several performance tests on STM platforms showed this optimisation allows to spare
+the CPU while having the maximum throughput.
+
+4.4) WOL
+Wake up on Lan feature through Magic Frame is only supported for the GMAC
+core.
+
+4.5) DMA descriptors
+Driver handles both normal and enhanced descriptors. The latter has been only
+tested on DWC Ether MAC 10/100/1000 Universal version 3.41a.
+
+4.6) Ethtool support
+Ethtool is supported. Driver statistics and internal errors can be taken using:
+ethtool -S ethX command. It is possible to dump registers etc.
+
+4.7) Jumbo and Segmentation Offloading
+Jumbo frames are supported and tested for the GMAC.
+The GSO has been also added but it's performed in software.
+LRO is not supported.
+
+4.8) Physical
+The driver is compatible with PAL to work with PHY and GPHY devices.
+
+4.9) Platform information
+Several information came from the platform; please refer to the
+driver's Header file in include/linux directory.
+
+struct plat_stmmacenet_data {
+        int bus_id;
+        int pbl;
+        int has_gmac;
+        void (*fix_mac_speed)(void *priv, unsigned int speed);
+        void (*bus_setup)(unsigned long ioaddr);
+#ifdef CONFIG_STM_DRIVERS
+        struct stm_pad_config *pad_config;
+#endif
+        void *bsp_priv;
+};
+
+Where:
+- pbl (Programmable Burst Length) is maximum number of
+  beats to be transferred in one DMA transaction.
+  GMAC also enables the 4xPBL by default.
+- fix_mac_speed and bus_setup are used to configure internal target
+  registers (on STM platforms);
+- has_gmac: GMAC core is on board (get it at run-time in the next step);
+- bus_id: bus identifier.
+
+struct plat_stmmacphy_data {
+        int bus_id;
+        int phy_addr;
+        unsigned int phy_mask;
+        int interface;
+        int (*phy_reset)(void *priv);
+        void *priv;
+};
+
+Where:
+- bus_id: bus identifier;
+- phy_addr: physical address used for the attached phy device;
+            set it to -1 to get it at run-time;
+- interface: physical MII interface mode;
+- phy_reset: hook to reset HW function.
+
+TODO:
+- Continue to make the driver more generic and suitable for other Synopsys
+  Ethernet controllers used on other architectures (i.e. ARM).
+- 10G controllers are not supported.
+- MAC uses Normal descriptors and GMAC uses enhanced ones.
+  This is a limit that should be reviewed. MAC could want to
+  use the enhanced structure.
+- Checksumming: Rx/Tx csum is done in HW in case of GMAC only.
+- Review the timer optimisation code to use an embedded device that seems to be
+  available in new chip generations.

drivers/net/Kconfig

@@ -2582,6 +2582,31 @@ config CHELSIO_T3
 	  To compile this driver as a module, choose M here: the module
 	  will be called cxgb3.
 
+config CHELSIO_T4_DEPENDS
+	tristate
+	depends on PCI && INET
+	default y
+
+config CHELSIO_T4
+	tristate "Chelsio Communications T4 Ethernet support"
+	depends on CHELSIO_T4_DEPENDS
+	select FW_LOADER
+	select MDIO
+	help
+	  This driver supports Chelsio T4-based gigabit and 10Gb Ethernet
+	  adapters.
+
+	  For general information about Chelsio and our products, visit
+	  our website at <http://www.chelsio.com>.
+
+	  For customer support, please visit our customer support page at
+	  <http://www.chelsio.com/support.htm>.
+
+	  Please send feedback to <linux-bugs@chelsio.com>.
+
+	  To compile this driver as a module choose M here; the module
+	  will be called cxgb4.
+
 config EHEA
 	tristate "eHEA Ethernet support"
 	depends on IBMEBUS && INET && SPARSEMEM

drivers/net/Makefile

@@ -19,6 +19,7 @@ obj-$(CONFIG_IXGB) += ixgb/
 obj-$(CONFIG_IP1000) += ipg.o
 obj-$(CONFIG_CHELSIO_T1) += chelsio/
 obj-$(CONFIG_CHELSIO_T3) += cxgb3/
+obj-$(CONFIG_CHELSIO_T4) += cxgb4/
 obj-$(CONFIG_EHEA) += ehea/
 obj-$(CONFIG_CAN) += can/
 obj-$(CONFIG_BONDING) += bonding/

drivers/net/benet/be_cmds.c

@@ -1464,8 +1464,8 @@ int be_cmd_get_flash_crc(struct be_adapter *adapter, u8 *flashed_crc,
 
 	req->params.op_type = cpu_to_le32(IMG_TYPE_REDBOOT);
 	req->params.op_code = cpu_to_le32(FLASHROM_OPER_REPORT);
-	req->params.offset = offset;
+	req->params.offset = cpu_to_le32(offset);
-	req->params.data_buf_size = 0x4;
+	req->params.data_buf_size = cpu_to_le32(0x4);
 
 	status = be_mcc_notify_wait(adapter);
 	if (!status)

drivers/net/benet/be_main.c

@@ -807,7 +807,7 @@ static void be_rx_compl_process(struct be_adapter *adapter,
 			return;
 		}
 		vid = AMAP_GET_BITS(struct amap_eth_rx_compl, vlan_tag, rxcp);
-		vid = be16_to_cpu(vid);
+		vid = swab16(vid);
 		vlan_hwaccel_receive_skb(skb, adapter->vlan_grp, vid);
 	} else {
 		netif_receive_skb(skb);
@@ -884,7 +884,7 @@ static void be_rx_compl_process_gro(struct be_adapter *adapter,
 		napi_gro_frags(&eq_obj->napi);
 	} else {
 		vid = AMAP_GET_BITS(struct amap_eth_rx_compl, vlan_tag, rxcp);
-		vid = be16_to_cpu(vid);
+		vid = swab16(vid);
 
 		if (!adapter->vlan_grp || adapter->vlans_added == 0)
 			return;
@@ -1855,7 +1855,7 @@ static bool be_flash_redboot(struct be_adapter *adapter,
 	p += crc_offset;
 
 	status = be_cmd_get_flash_crc(adapter, flashed_crc,
-			(img_start + image_size - 4));
+			(image_size - 4));
 	if (status) {
 		dev_err(&adapter->pdev->dev,
 		"could not get crc from flash, not flashing redboot\n");
@@ -1991,7 +1991,7 @@ int be_load_fw(struct be_adapter *adapter, u8 *func)
 	struct flash_file_hdr_g3 *fhdr3;
 	struct image_hdr *img_hdr_ptr = NULL;
 	struct be_dma_mem flash_cmd;
-	int status, i = 0;
+	int status, i = 0, num_imgs = 0;
 	const u8 *p;
 
 	strcpy(fw_file, func);
@@ -2017,15 +2017,14 @@ int be_load_fw(struct be_adapter *adapter, u8 *func)
 	if ((adapter->generation == BE_GEN3) &&
 			(get_ufigen_type(fhdr) == BE_GEN3)) {
 		fhdr3 = (struct flash_file_hdr_g3 *) fw->data;
-		for (i = 0; i < fhdr3->num_imgs; i++) {
+		num_imgs = le32_to_cpu(fhdr3->num_imgs);
+		for (i = 0; i < num_imgs; i++) {
 			img_hdr_ptr = (struct image_hdr *) (fw->data +
 					(sizeof(struct flash_file_hdr_g3) +
-					i * sizeof(struct image_hdr)));
+					 i * sizeof(struct image_hdr)));
-			if (img_hdr_ptr->imageid == 1) {
+			if (le32_to_cpu(img_hdr_ptr->imageid) == 1)
-				status = be_flash_data(adapter, fw,
+				status = be_flash_data(adapter, fw, &flash_cmd,
-						&flash_cmd, fhdr3->num_imgs);
+							num_imgs);
-			}
-
 		}
 	} else if ((adapter->generation == BE_GEN2) &&
 			(get_ufigen_type(fhdr) == BE_GEN2)) {

drivers/net/bonding/bond_main.c

@@ -4156,7 +4156,7 @@ static int bond_xmit_roundrobin(struct sk_buff *skb, struct net_device *bond_dev
 	 * send the join/membership reports.  The curr_active_slave found
 	 * will send all of this type of traffic.
 	 */
-	if ((iph->protocol == htons(IPPROTO_IGMP)) &&
+	if ((iph->protocol == IPPROTO_IGMP) &&
 	    (skb->protocol == htons(ETH_P_IP))) {
 
 		read_lock(&bond->curr_slave_lock);
@@ -4450,6 +4450,14 @@ static const struct net_device_ops bond_netdev_ops = {
 	.ndo_vlan_rx_kill_vid	= bond_vlan_rx_kill_vid,
 };
 
+static void bond_destructor(struct net_device *bond_dev)
+{
+	struct bonding *bond = netdev_priv(bond_dev);
+	if (bond->wq)
+		destroy_workqueue(bond->wq);
+	free_netdev(bond_dev);
+}
+
 static void bond_setup(struct net_device *bond_dev)
 {
 	struct bonding *bond = netdev_priv(bond_dev);
@@ -4470,7 +4478,7 @@ static void bond_setup(struct net_device *bond_dev)
 	bond_dev->ethtool_ops = &bond_ethtool_ops;
 	bond_set_mode_ops(bond, bond->params.mode);
 
-	bond_dev->destructor = free_netdev;
+	bond_dev->destructor = bond_destructor;
 
 	/* Initialize the device options */
 	bond_dev->tx_queue_len = 0;
@@ -4542,9 +4550,6 @@ static void bond_uninit(struct net_device *bond_dev)
 
 	bond_remove_proc_entry(bond);
 
-	if (bond->wq)
-		destroy_workqueue(bond->wq);
-
 	netif_addr_lock_bh(bond_dev);
 	bond_mc_list_destroy(bond);
 	netif_addr_unlock_bh(bond_dev);
@@ -4956,8 +4961,8 @@ int bond_create(struct net *net, const char *name)
 				bond_setup);
 	if (!bond_dev) {
 		pr_err("%s: eek! can't alloc netdev!\n", name);
-		res = -ENOMEM;
+		rtnl_unlock();
-		goto out;
+		return -ENOMEM;
 	}
 
 	dev_net_set(bond_dev, net);
@@ -4966,19 +4971,16 @@ int bond_create(struct net *net, const char *name)
 	if (!name) {
 		res = dev_alloc_name(bond_dev, "bond%d");
 		if (res < 0)
-			goto out_netdev;
+			goto out;
 	}
 
 	res = register_netdevice(bond_dev);
-	if (res < 0)
-		goto out_netdev;
 
 out:
 	rtnl_unlock();
+	if (res < 0)
+		bond_destructor(bond_dev);
 	return res;
-out_netdev:
-	free_netdev(bond_dev);
-	goto out;
 }
 
 static int __net_init bond_net_init(struct net *net)

drivers/net/cxgb4/Makefile

@@ -0,0 +1,7 @@
+#
+# Chelsio T4 driver
+#
+
+obj-$(CONFIG_CHELSIO_T4) += cxgb4.o
+
+cxgb4-objs := cxgb4_main.o l2t.o t4_hw.o sge.o

drivers/net/cxgb4/cxgb4_uld.h

@@ -0,0 +1,239 @@
+/*
+ * This file is part of the Chelsio T4 Ethernet driver for Linux.
+ *
+ * Copyright (c) 2003-2010 Chelsio Communications, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef __CXGB4_OFLD_H
+#define __CXGB4_OFLD_H
+
+#include <linux/cache.h>
+#include <linux/spinlock.h>
+#include <linux/skbuff.h>
+#include <asm/atomic.h>
+
+/* CPL message priority levels */
+enum {
+	CPL_PRIORITY_DATA     = 0,  /* data messages */
+	CPL_PRIORITY_SETUP    = 1,  /* connection setup messages */
+	CPL_PRIORITY_TEARDOWN = 0,  /* connection teardown messages */
+	CPL_PRIORITY_LISTEN   = 1,  /* listen start/stop messages */
+	CPL_PRIORITY_ACK      = 1,  /* RX ACK messages */
+	CPL_PRIORITY_CONTROL  = 1   /* control messages */
+};
+
+#define INIT_TP_WR(w, tid) do { \
+	(w)->wr.wr_hi = htonl(FW_WR_OP(FW_TP_WR) | \
+			      FW_WR_IMMDLEN(sizeof(*w) - sizeof(w->wr))); \
+	(w)->wr.wr_mid = htonl(FW_WR_LEN16(DIV_ROUND_UP(sizeof(*w), 16)) | \
+			       FW_WR_FLOWID(tid)); \
+	(w)->wr.wr_lo = cpu_to_be64(0); \
+} while (0)
+
+#define INIT_TP_WR_CPL(w, cpl, tid) do { \
+	INIT_TP_WR(w, tid); \
+	OPCODE_TID(w) = htonl(MK_OPCODE_TID(cpl, tid)); \
+} while (0)
+
+#define INIT_ULPTX_WR(w, wrlen, atomic, tid) do { \
+	(w)->wr.wr_hi = htonl(FW_WR_OP(FW_ULPTX_WR) | FW_WR_ATOMIC(atomic)); \
+	(w)->wr.wr_mid = htonl(FW_WR_LEN16(DIV_ROUND_UP(wrlen, 16)) | \
+			       FW_WR_FLOWID(tid)); \
+	(w)->wr.wr_lo = cpu_to_be64(0); \
+} while (0)
+
+/* Special asynchronous notification message */
+#define CXGB4_MSG_AN ((void *)1)
+
+struct serv_entry {
+	void *data;
+};
+
+union aopen_entry {
+	void *data;
+	union aopen_entry *next;
+};
+
+/*
+ * Holds the size, base address, free list start, etc of the TID, server TID,
+ * and active-open TID tables.  The tables themselves are allocated dynamically.
+ */
+struct tid_info {
+	void **tid_tab;
+	unsigned int ntids;
+
+	struct serv_entry *stid_tab;
+	unsigned long *stid_bmap;
+	unsigned int nstids;
+	unsigned int stid_base;
+
+	union aopen_entry *atid_tab;
+	unsigned int natids;
+
+	unsigned int nftids;
+	unsigned int ftid_base;
+
+	spinlock_t atid_lock ____cacheline_aligned_in_smp;
+	union aopen_entry *afree;
+	unsigned int atids_in_use;
+
+	spinlock_t stid_lock;
+	unsigned int stids_in_use;
+
+	atomic_t tids_in_use;
+};
+
+static inline void *lookup_tid(const struct tid_info *t, unsigned int tid)
+{
+	return tid < t->ntids ? t->tid_tab[tid] : NULL;
+}
+
+static inline void *lookup_atid(const struct tid_info *t, unsigned int atid)
+{
+	return atid < t->natids ? t->atid_tab[atid].data : NULL;
+}
+
+static inline void *lookup_stid(const struct tid_info *t, unsigned int stid)
+{
+	stid -= t->stid_base;
+	return stid < t->nstids ? t->stid_tab[stid].data : NULL;
+}
+
+static inline void cxgb4_insert_tid(struct tid_info *t, void *data,
+				    unsigned int tid)
+{
+	t->tid_tab[tid] = data;
+	atomic_inc(&t->tids_in_use);
+}
+
+int cxgb4_alloc_atid(struct tid_info *t, void *data);
+int cxgb4_alloc_stid(struct tid_info *t, int family, void *data);
+void cxgb4_free_atid(struct tid_info *t, unsigned int atid);
+void cxgb4_free_stid(struct tid_info *t, unsigned int stid, int family);
+void cxgb4_remove_tid(struct tid_info *t, unsigned int qid, unsigned int tid);
+void cxgb4_queue_tid_release(struct tid_info *t, unsigned int chan,
+			     unsigned int tid);
+
+struct in6_addr;
+
+int cxgb4_create_server(const struct net_device *dev, unsigned int stid,
+			__be32 sip, __be16 sport, unsigned int queue);
+int cxgb4_create_server6(const struct net_device *dev, unsigned int stid,
+			 const struct in6_addr *sip, __be16 sport,
+			 unsigned int queue);
+
+static inline void set_wr_txq(struct sk_buff *skb, int prio, int queue)
+{
+	skb_set_queue_mapping(skb, (queue << 1) | prio);
+}
+
+enum cxgb4_uld {
+	CXGB4_ULD_RDMA,
+	CXGB4_ULD_ISCSI,
+	CXGB4_ULD_MAX
+};
+
+enum cxgb4_state {
+	CXGB4_STATE_UP,
+	CXGB4_STATE_START_RECOVERY,
+	CXGB4_STATE_DOWN,
+	CXGB4_STATE_DETACH
+};
+
+struct pci_dev;
+struct l2t_data;
+struct net_device;
+struct pkt_gl;
+struct tp_tcp_stats;
+
+struct cxgb4_range {
+	unsigned int start;
+	unsigned int size;
+};
+
+struct cxgb4_virt_res {                      /* virtualized HW resources */
+	struct cxgb4_range ddp;
+	struct cxgb4_range iscsi;
+	struct cxgb4_range stag;
+	struct cxgb4_range rq;
+	struct cxgb4_range pbl;
+};
+
+/*
+ * Block of information the LLD provides to ULDs attaching to a device.
+ */
+struct cxgb4_lld_info {
+	struct pci_dev *pdev;                /* associated PCI device */
+	struct l2t_data *l2t;                /* L2 table */
+	struct tid_info *tids;               /* TID table */
+	struct net_device **ports;           /* device ports */
+	const struct cxgb4_virt_res *vr;     /* assorted HW resources */
+	const unsigned short *mtus;          /* MTU table */
+	const unsigned short *rxq_ids;       /* the ULD's Rx queue ids */
+	unsigned short nrxq;                 /* # of Rx queues */
+	unsigned short ntxq;                 /* # of Tx queues */
+	unsigned char nchan:4;               /* # of channels */
+	unsigned char nports:4;              /* # of ports */
+	unsigned char wr_cred;               /* WR 16-byte credits */
+	unsigned char adapter_type;          /* type of adapter */
+	unsigned char fw_api_ver;            /* FW API version */
+	unsigned int fw_vers;                /* FW version */
+	unsigned int iscsi_iolen;            /* iSCSI max I/O length */
+	unsigned short udb_density;          /* # of user DB/page */
+	unsigned short ucq_density;          /* # of user CQs/page */
+	void __iomem *gts_reg;               /* address of GTS register */
+	void __iomem *db_reg;                /* address of kernel doorbell */
+};
+
+struct cxgb4_uld_info {
+	const char *name;
+	void *(*add)(const struct cxgb4_lld_info *p);
+	int (*rx_handler)(void *handle, const __be64 *rsp,
+			  const struct pkt_gl *gl);
+	int (*state_change)(void *handle, enum cxgb4_state new_state);
+};
+
+int cxgb4_register_uld(enum cxgb4_uld type, const struct cxgb4_uld_info *p);
+int cxgb4_unregister_uld(enum cxgb4_uld type);
+int cxgb4_ofld_send(struct net_device *dev, struct sk_buff *skb);
+unsigned int cxgb4_port_chan(const struct net_device *dev);
+unsigned int cxgb4_port_viid(const struct net_device *dev);
+unsigned int cxgb4_port_idx(const struct net_device *dev);
+struct net_device *cxgb4_netdev_by_hwid(struct pci_dev *pdev, unsigned int id);
+unsigned int cxgb4_best_mtu(const unsigned short *mtus, unsigned short mtu,
+			    unsigned int *idx);
+void cxgb4_get_tcp_stats(struct pci_dev *pdev, struct tp_tcp_stats *v4,
+			 struct tp_tcp_stats *v6);
+void cxgb4_iscsi_init(struct net_device *dev, unsigned int tag_mask,
+		      const unsigned int *pgsz_order);
+struct sk_buff *cxgb4_pktgl_to_skb(const struct pkt_gl *gl,
+				   unsigned int skb_len, unsigned int pull_len);
+#endif  /* !__CXGB4_OFLD_H */

drivers/net/cxgb4/l2t.h

@@ -0,0 +1,110 @@
+/*
+ * This file is part of the Chelsio T4 Ethernet driver for Linux.
+ *
+ * Copyright (c) 2003-2010 Chelsio Communications, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef __CXGB4_L2T_H
+#define __CXGB4_L2T_H
+
+#include <linux/spinlock.h>
+#include <linux/if_ether.h>
+#include <asm/atomic.h>
+
+struct adapter;
+struct l2t_data;
+struct neighbour;
+struct net_device;
+struct file_operations;
+struct cpl_l2t_write_rpl;
+
+/*
+ * Each L2T entry plays multiple roles.  First of all, it keeps state for the
+ * corresponding entry of the HW L2 table and maintains a queue of offload
+ * packets awaiting address resolution.  Second, it is a node of a hash table
+ * chain, where the nodes of the chain are linked together through their next
+ * pointer.  Finally, each node is a bucket of a hash table, pointing to the
+ * first element in its chain through its first pointer.
+ */
+struct l2t_entry {
+	u16 state;                  /* entry state */
+	u16 idx;                    /* entry index */
+	u32 addr[4];                /* next hop IP or IPv6 address */
+	int ifindex;                /* neighbor's net_device's ifindex */
+	struct neighbour *neigh;    /* associated neighbour */
+	struct l2t_entry *first;    /* start of hash chain */
+	struct l2t_entry *next;     /* next l2t_entry on chain */
+	struct sk_buff *arpq_head;  /* queue of packets awaiting resolution */
+	struct sk_buff *arpq_tail;
+	spinlock_t lock;
+	atomic_t refcnt;            /* entry reference count */
+	u16 hash;                   /* hash bucket the entry is on */
+	u16 vlan;                   /* VLAN TCI (id: bits 0-11, prio: 13-15 */
+	u8 v6;                      /* whether entry is for IPv6 */
+	u8 lport;                   /* associated offload logical interface */
+	u8 dmac[ETH_ALEN];          /* neighbour's MAC address */
+};
+
+typedef void (*arp_err_handler_t)(void *handle, struct sk_buff *skb);
+
+/*
+ * Callback stored in an skb to handle address resolution failure.
+ */
+struct l2t_skb_cb {
+	void *handle;
+	arp_err_handler_t arp_err_handler;
+};
+
+#define L2T_SKB_CB(skb) ((struct l2t_skb_cb *)(skb)->cb)
+
+static inline void t4_set_arp_err_handler(struct sk_buff *skb, void *handle,
+					  arp_err_handler_t handler)
+{
+	L2T_SKB_CB(skb)->handle = handle;
+	L2T_SKB_CB(skb)->arp_err_handler = handler;
+}
+
+void cxgb4_l2t_release(struct l2t_entry *e);
+int cxgb4_l2t_send(struct net_device *dev, struct sk_buff *skb,
+		   struct l2t_entry *e);
+struct l2t_entry *cxgb4_l2t_get(struct l2t_data *d, struct neighbour *neigh,
+				const struct net_device *physdev,
+				unsigned int priority);
+
+void t4_l2t_update(struct adapter *adap, struct neighbour *neigh);
+struct l2t_entry *t4_l2t_alloc_switching(struct l2t_data *d);
+int t4_l2t_set_switching(struct adapter *adap, struct l2t_entry *e, u16 vlan,
+			 u8 port, u8 *eth_addr);
+struct l2t_data *t4_init_l2t(void);
+void do_l2t_write_rpl(struct adapter *p, const struct cpl_l2t_write_rpl *rpl);
+
+extern const struct file_operations t4_l2t_fops;
+#endif  /* __CXGB4_L2T_H */

drivers/net/cxgb4/t4_hw.h

@@ -0,0 +1,100 @@
+/*
+ * This file is part of the Chelsio T4 Ethernet driver for Linux.
+ *
+ * Copyright (c) 2003-2010 Chelsio Communications, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef __T4_HW_H
+#define __T4_HW_H
+
+#include <linux/types.h>
+
+enum {
+	NCHAN          = 4,     /* # of HW channels */
+	MAX_MTU        = 9600,  /* max MAC MTU, excluding header + FCS */
+	EEPROMSIZE     = 17408, /* Serial EEPROM physical size */
+	EEPROMVSIZE    = 32768, /* Serial EEPROM virtual address space size */
+	RSS_NENTRIES   = 2048,  /* # of entries in RSS mapping table */
+	TCB_SIZE       = 128,   /* TCB size */
+	NMTUS          = 16,    /* size of MTU table */
+	NCCTRL_WIN     = 32,    /* # of congestion control windows */
+	NEXACT_MAC     = 336,   /* # of exact MAC address filters */
+	L2T_SIZE       = 4096,  /* # of L2T entries */
+	MBOX_LEN       = 64,    /* mailbox size in bytes */
+	TRACE_LEN      = 112,   /* length of trace data and mask */
+	FILTER_OPT_LEN = 36,    /* filter tuple width for optional components */
+	NWOL_PAT       = 8,     /* # of WoL patterns */
+	WOL_PAT_LEN    = 128,   /* length of WoL patterns */
+};
+
+enum {
+	SF_PAGE_SIZE = 256,           /* serial flash page size */
+	SF_SEC_SIZE = 64 * 1024,      /* serial flash sector size */
+	SF_SIZE = SF_SEC_SIZE * 16,   /* serial flash size */
+};
+
+enum { RSP_TYPE_FLBUF, RSP_TYPE_CPL, RSP_TYPE_INTR }; /* response entry types */
+
+enum { MBOX_OWNER_NONE, MBOX_OWNER_FW, MBOX_OWNER_DRV };    /* mailbox owners */
+
+enum {
+	SGE_MAX_WR_LEN = 512,     /* max WR size in bytes */
+	SGE_NTIMERS = 6,          /* # of interrupt holdoff timer values */
+	SGE_NCOUNTERS = 4,        /* # of interrupt packet counter values */
+};
+
+struct sge_qstat {                /* data written to SGE queue status entries */
+	__be32 qid;
+	__be16 cidx;
+	__be16 pidx;
+};
+
+/*
+ * Structure for last 128 bits of response descriptors
+ */
+struct rsp_ctrl {
+	__be32 hdrbuflen_pidx;
+	__be32 pldbuflen_qid;
+	union {
+		u8 type_gen;
+		__be64 last_flit;
+	};
+};
+
+#define RSPD_NEWBUF 0x80000000U
+#define RSPD_LEN    0x7fffffffU
+
+#define RSPD_GEN(x)  ((x) >> 7)
+#define RSPD_TYPE(x) (((x) >> 4) & 3)
+
+#define QINTR_CNT_EN       0x1
+#define QINTR_TIMER_IDX(x) ((x) << 1)
+#endif /* __T4_HW_H */

drivers/net/gianfar.c

@@ -676,7 +676,7 @@ static int gfar_of_init(struct of_device *ofdev, struct net_device **pdev)
 		priv->rx_queue[i] = NULL;
 
 	for (i = 0; i < priv->num_tx_queues; i++) {
-		priv->tx_queue[i] =  (struct gfar_priv_tx_q *)kmalloc(
+		priv->tx_queue[i] =  (struct gfar_priv_tx_q *)kzalloc(
 				sizeof (struct gfar_priv_tx_q), GFP_KERNEL);
 		if (!priv->tx_queue[i]) {
 			err = -ENOMEM;
@@ -689,7 +689,7 @@ static int gfar_of_init(struct of_device *ofdev, struct net_device **pdev)
 	}
 
 	for (i = 0; i < priv->num_rx_queues; i++) {
-		priv->rx_queue[i] = (struct gfar_priv_rx_q *)kmalloc(
+		priv->rx_queue[i] = (struct gfar_priv_rx_q *)kzalloc(
 					sizeof (struct gfar_priv_rx_q), GFP_KERNEL);
 		if (!priv->rx_queue[i]) {
 			err = -ENOMEM;
@@ -1120,10 +1120,10 @@ static int gfar_probe(struct of_device *ofdev,
 	/* provided which set of benchmarks. */
 	printk(KERN_INFO "%s: Running with NAPI enabled\n", dev->name);
 	for (i = 0; i < priv->num_rx_queues; i++)
-		printk(KERN_INFO "%s: :RX BD ring size for Q[%d]: %d\n",
+		printk(KERN_INFO "%s: RX BD ring size for Q[%d]: %d\n",
 			dev->name, i, priv->rx_queue[i]->rx_ring_size);
 	for(i = 0; i < priv->num_tx_queues; i++)
-		 printk(KERN_INFO "%s:TX BD ring size for Q[%d]: %d\n",
+		 printk(KERN_INFO "%s: TX BD ring size for Q[%d]: %d\n",
 			dev->name, i, priv->tx_queue[i]->tx_ring_size);
 
 	return 0;
@@ -1638,13 +1638,13 @@ static void free_skb_resources(struct gfar_private *priv)
 	/* Go through all the buffer descriptors and free their data buffers */
 	for (i = 0; i < priv->num_tx_queues; i++) {
 		tx_queue = priv->tx_queue[i];
-		if(!tx_queue->tx_skbuff)
+		if(tx_queue->tx_skbuff)
 			free_skb_tx_queue(tx_queue);
 	}
 
 	for (i = 0; i < priv->num_rx_queues; i++) {
 		rx_queue = priv->rx_queue[i];
-		if(!rx_queue->rx_skbuff)
+		if(rx_queue->rx_skbuff)
 			free_skb_rx_queue(rx_queue);
 	}
 

drivers/net/pcmcia/smc91c92_cs.c

@@ -493,13 +493,14 @@ static int pcmcia_get_versmac(struct pcmcia_device *p_dev,
 {
 	struct net_device *dev = priv;
 	cisparse_t parse;
+	u8 *buf;
 
 	if (pcmcia_parse_tuple(tuple, &parse))
 		return -EINVAL;
 
-	if ((parse.version_1.ns > 3) &&
+	buf = parse.version_1.str + parse.version_1.ofs[3];
-	    (cvt_ascii_address(dev,
+
-			       (parse.version_1.str + parse.version_1.ofs[3]))))
+	if ((parse.version_1.ns > 3) && (cvt_ascii_address(dev, buf) == 0))
 		return 0;
 
 	return -EINVAL;
@@ -528,7 +529,7 @@ static int mhz_setup(struct pcmcia_device *link)
     len = pcmcia_get_tuple(link, 0x81, &buf);
     if (buf && len >= 13) {
 	    buf[12] = '\0';
-	    if (cvt_ascii_address(dev, buf))
+	    if (cvt_ascii_address(dev, buf) == 0)
 		    rc = 0;
     }
     kfree(buf);
@@ -910,7 +911,7 @@ static int smc91c92_config(struct pcmcia_device *link)
 
     if (i != 0) {
 	printk(KERN_NOTICE "smc91c92_cs: Unable to find hardware address.\n");
-	goto config_undo;
+	goto config_failed;
     }
 
     smc->duplex = 0;
@@ -998,6 +999,7 @@ config_undo:
     unregister_netdev(dev);
 config_failed:
     smc91c92_release(link);
+    free_netdev(dev);
     return -ENODEV;
 } /* smc91c92_config */