[media] drivers/media: Remove unnecessary semicolon

A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@r1@
statement S;
position p,p1;
@@
S@p1;@p
@script:python r2@
p << r1.p;
p1 << r1.p1;
@@
if p[0].line != p1[0].line_end:
        cocci.include_match(False)
@@
position r1.p;
@@
-;@p
// </smpl>

[mchehab@redhat.com: some hunks got bitroted; applied only the
 ones that succeeds]
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
[crope@iki.fi: For my drivers a8293, af9013, af9015, af9035]
Acked-by: Antti Palosaari <crope@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/dvb-core/dvb_frontend.c

@@ -2309,7 +2309,7 @@ static int dvb_frontend_ioctl_legacy(struct file *file,
 		fepriv->tune_mode_flags = (unsigned long) parg;
 		err = 0;
 		break;
-	};
+	}
 
 	return err;
 }

drivers/media/dvb-frontends/a8293.c

@@ -90,7 +90,7 @@ static int a8293_set_voltage(struct dvb_frontend *fe,
 	default:
 		ret = -EINVAL;
 		goto err;
-	};
+	}
 
 	ret = a8293_wr(priv, &priv->reg[0], 1);
 	if (ret)

drivers/media/dvb-frontends/af9013.c

@@ -241,7 +241,7 @@ static int af9013_set_gpio(struct af9013_state *state, u8 gpio, u8 gpioval)
 				KBUILD_MODNAME, gpio);
 		ret = -EINVAL;
 		goto err;
-	};
+	}
 
 	switch (gpio) {
 	case 0:
@@ -253,7 +253,7 @@ static int af9013_set_gpio(struct af9013_state *state, u8 gpio, u8 gpioval)
 	default:
 		pos = 4;
 		break;
-	};
+	}
 
 	ret = af9013_wr_reg_bits(state, addr, pos, 4, gpioval);
 	if (ret)
@@ -726,7 +726,7 @@ static int af9013_set_frontend(struct dvb_frontend *fe)
 	default:
 		dev_dbg(&state->i2c->dev, "%s: invalid hierarchy\n", __func__);
 		auto_mode = 1;
-	};
+	}
 
 	switch (c->modulation) {
 	case QAM_AUTO:

drivers/media/dvb-frontends/bcm3510.c

@@ -527,7 +527,7 @@ static int bcm3510_set_frontend(struct dvb_frontend *fe)
 			cmd.ACQUIRE1.IF_FREQ = 0x0;
 		default:
 			return -EINVAL;
-	};
+	}
 	cmd.ACQUIRE0.OFFSET = 0;
 	cmd.ACQUIRE0.NTSCSWEEP = 1;
 	cmd.ACQUIRE0.FA = 1;

drivers/media/dvb-frontends/cx24110.c

@@ -218,7 +218,7 @@ static int cx24110_set_fec (struct cx24110_state* state, fe_code_rate_t fec)
 	   } else
 		   return -EOPNOTSUPP;
 /* fixme (low): which is the correct return code? */
-	};
+	}
 	return 0;
 }
 
@@ -275,7 +275,7 @@ static int cx24110_set_symbolrate (struct cx24110_state* state, u32 srate)
 		cx24110_writereg(state,0x07,tmp|0x3);
 		cx24110_writereg(state,0x06,0x78);
 		fclk=90999000UL;
-	};
+	}
 	dprintk("cx24110 debug: fclk %d Hz\n",fclk);
 	/* we need to divide two integers with approx. 27 bits in 32 bit
 	   arithmetic giving a 25 bit result */
@@ -362,7 +362,7 @@ static int cx24110_initfe(struct dvb_frontend* fe)
 
 	for(i = 0; i < ARRAY_SIZE(cx24110_regdata); i++) {
 		cx24110_writereg(state, cx24110_regdata[i].reg, cx24110_regdata[i].data);
-	};
+	}
 
 	return 0;
 }

drivers/media/dvb-frontends/drxd_hard.c

@@ -991,7 +991,7 @@ static int HI_Command(struct drxd_state *state, u16 cmd, u16 * pResult)
 		if (nrRetries > DRXD_MAX_RETRIES) {
 			status = -1;
 			break;
-		};
+		}
 		status = Read16(state, HI_RA_RAM_SRV_CMD__A, &waitCmd, 0);
 	} while (waitCmd != 0);
 

drivers/media/dvb-frontends/isl6405.c

@@ -77,7 +77,7 @@ static int isl6405_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage
 			break;
 		default:
 			return -EINVAL;
-		};
+		}
 	}
 	isl6405->config |= isl6405->override_or;
 	isl6405->config &= isl6405->override_and;

drivers/media/dvb-frontends/isl6421.c

@@ -63,7 +63,7 @@ static int isl6421_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage
 		break;
 	default:
 		return -EINVAL;
-	};
+	}
 
 	isl6421->config |= isl6421->override_or;
 	isl6421->config &= isl6421->override_and;

drivers/media/dvb-frontends/lnbp21.c

@@ -65,7 +65,7 @@ static int lnbp21_set_voltage(struct dvb_frontend *fe,
 		break;
 	default:
 		return -EINVAL;
-	};
+	}
 
 	lnbp21->config |= lnbp21->override_or;
 	lnbp21->config &= lnbp21->override_and;
@@ -108,7 +108,7 @@ static int lnbp21_set_tone(struct dvb_frontend *fe,
 		break;
 	default:
 		return -EINVAL;
-	};
+	}
 
 	lnbp21->config |= lnbp21->override_or;
 	lnbp21->config &= lnbp21->override_and;

drivers/media/dvb-frontends/lnbp22.c

@@ -73,7 +73,7 @@ static int lnbp22_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
 		break;
 	default:
 		return -EINVAL;
-	};
+	}
 
 	dprintk(1, "%s: 0x%02x)\n", __func__, lnbp22->config[3]);
 	return (i2c_transfer(lnbp22->i2c, &msg, 1) == 1) ? 0 : -EIO;

drivers/media/dvb-frontends/si21xx.c

@@ -343,7 +343,7 @@ static int si21xx_wait_diseqc_idle(struct si21xx_state *state, int timeout)
 			return -ETIMEDOUT;
 		}
 		msleep(10);
-	};
+	}
 
 	return 0;
 }
@@ -472,7 +472,7 @@ static int si21xx_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t volt)
 		break;
 	default:
 		return -EINVAL;
-	};
+	}
 }
 
 static int si21xx_init(struct dvb_frontend *fe)

drivers/media/dvb-frontends/sp887x.c

@@ -229,7 +229,7 @@ static int configure_reg0xc05(struct dtv_frontend_properties *p, u16 *reg0xc05)
 		break;
 	default:
 		return -EINVAL;
-	};
+	}
 
 	switch (p->hierarchy) {
 	case HIERARCHY_NONE:
@@ -248,7 +248,7 @@ static int configure_reg0xc05(struct dtv_frontend_properties *p, u16 *reg0xc05)
 		break;
 	default:
 		return -EINVAL;
-	};
+	}
 
 	switch (p->code_rate_HP) {
 	case FEC_1_2:
@@ -270,7 +270,7 @@ static int configure_reg0xc05(struct dtv_frontend_properties *p, u16 *reg0xc05)
 		break;
 	default:
 		return -EINVAL;
-	};
+	}
 
 	if (known_parameters)
 		*reg0xc05 |= (2 << 1);	/* use specified parameters */

drivers/media/dvb-frontends/stv0299.c

@@ -199,7 +199,7 @@ static int stv0299_wait_diseqc_fifo (struct stv0299_state* state, int timeout)
 			return -ETIMEDOUT;
 		}
 		msleep(10);
-	};
+	}
 
 	return 0;
 }
@@ -216,7 +216,7 @@ static int stv0299_wait_diseqc_idle (struct stv0299_state* state, int timeout)
 			return -ETIMEDOUT;
 		}
 		msleep(10);
-	};
+	}
 
 	return 0;
 }
@@ -387,7 +387,7 @@ static int stv0299_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltag
 		break;
 	default:
 		return -EINVAL;
-	};
+	}
 
 	if (state->config->op0_off)
 		reg0x0c &= ~0x10;

drivers/media/dvb-frontends/stv0900_core.c

@@ -1553,7 +1553,7 @@ static int stv0900_status(struct stv0900_internal *intp,
 			* (tsbitrate1_val << 8 | tsbitrate0_val);
 		bitrate /= 16384;
 		dprintk("TS bitrate = %d Mbit/sec\n", bitrate);
-	};
+	}
 
 	return locked;
 }

drivers/media/dvb-frontends/tda8083.c

@@ -175,7 +175,7 @@ static void tda8083_wait_diseqc_fifo (struct tda8083_state* state, int timeout)
 	       !(tda8083_readreg(state, 0x02) & 0x80))
 	{
 		msleep(50);
-	};
+	}
 }
 
 static int tda8083_set_tone (struct tda8083_state* state, fe_sec_tone_mode_t tone)
@@ -215,7 +215,7 @@ static int tda8083_send_diseqc_burst (struct tda8083_state* state, fe_sec_mini_c
 		break;
 	default:
 		return -EINVAL;
-	};
+	}
 
 	tda8083_wait_diseqc_fifo (state, 100);
 

drivers/media/i2c/cx25840/cx25840-core.c

@@ -599,7 +599,7 @@ static void cx23885_initialize(struct i2c_client *client)
 		cx25840_write4(client, 0x114, 0x01bf0c9e);
 		cx25840_write4(client, 0x110, 0x000a030c);
 		break;
-	};
+	}
 
 	/* ADC2 input select */
 	cx25840_write(client, 0x102, 0x10);

drivers/media/pci/bt8xx/dst_ca.c

@@ -646,7 +646,7 @@ static long dst_ca_ioctl(struct file *file, unsigned int cmd, unsigned long ioct
 		dprintk(verbose, DST_CA_INFO, 1, " -->CA_SET_PID Success !");
 	default:
 		result = -EOPNOTSUPP;
-	};
+	}
  free_mem_and_exit:
 	kfree (p_ca_message);
 	kfree (p_ca_slot_info);

drivers/media/pci/cx23885/altera-ci.c

@@ -416,7 +416,7 @@ static void netup_read_ci_status(struct work_struct *work)
 				DVB_CA_EN50221_POLL_CAM_READY : 0);
 		ci_dbg_print("%s: setting CI[1] status = 0x%x\n",
 				__func__, inter->state[1]->status);
-	};
+	}
 
 	if (inter->state[0] != NULL) {
 		inter->state[0]->status =
@@ -425,7 +425,7 @@ static void netup_read_ci_status(struct work_struct *work)
 				DVB_CA_EN50221_POLL_CAM_READY : 0);
 		ci_dbg_print("%s: setting CI[0] status = 0x%x\n",
 				__func__, inter->state[0]->status);
-	};
+	}
 }
 
 /* CI irq handler */

drivers/media/pci/cx23885/cimax2.c

@@ -193,7 +193,7 @@ int netup_ci_op_cam(struct dvb_ca_en50221 *en50221, int slot,
 				0, &store, 1);
 		if (ret != 0)
 			return ret;
-	};
+	}
 	state->current_ci_flag = flag;
 
 	mutex_lock(&dev->gpio_lock);

drivers/media/pci/cx88/cx88-dvb.c

@@ -896,7 +896,7 @@ static int samsung_smt_7020_set_voltage(struct dvb_frontend *fe,
 		break;
 	default:
 		return -EINVAL;
-	};
+	}
 
 	return (i2c_transfer(&dev->core->i2c_adap, &msg, 1) == 1) ? 0 : -EIO;
 }