You've already forked linux-apfs
mirror of
https://github.com/linux-apfs/linux-apfs.git
synced 2026-05-01 15:00:59 -07:00
[ARM] 5539/1: Freescale STMP: onboard devices declaration
Define onboard devices for Freescale STMP3xxx boards Signed-off-by: dmitry pervushin <dpervushin@embeddedalley.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
dmitry pervushin
committed by
Russell King
Russell King
parent
a50808b6c4
commit
c11c22177a
@@ -19,6 +19,7 @@
|
||||
#include <linux/init.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/irq.h>
|
||||
#include <linux/dma-mapping.h>
|
||||
|
||||
#include <asm/dma.h>
|
||||
#include <asm/setup.h>
|
||||
@@ -39,6 +40,8 @@
|
||||
#include <mach/regs-icoll.h>
|
||||
#include <mach/regs-apbh.h>
|
||||
#include <mach/regs-apbx.h>
|
||||
#include <mach/regs-pxp.h>
|
||||
#include <mach/regs-i2c.h>
|
||||
|
||||
#include "stmp378x.h"
|
||||
/*
|
||||
@@ -232,6 +235,64 @@ static struct map_desc stmp378x_io_desc[] __initdata = {
|
||||
},
|
||||
};
|
||||
|
||||
|
||||
static u64 common_dmamask = DMA_BIT_MASK(32);
|
||||
|
||||
/*
|
||||
* devices that are present only on stmp378x, not on all 3xxx boards:
|
||||
* PxP
|
||||
* I2C
|
||||
*/
|
||||
static struct resource pxp_resource[] = {
|
||||
{
|
||||
.flags = IORESOURCE_MEM,
|
||||
.start = REGS_PXP_PHYS,
|
||||
.end = REGS_PXP_PHYS + REGS_PXP_SIZE,
|
||||
}, {
|
||||
.flags = IORESOURCE_IRQ,
|
||||
.start = IRQ_PXP,
|
||||
.end = IRQ_PXP,
|
||||
},
|
||||
};
|
||||
|
||||
struct platform_device stmp378x_pxp = {
|
||||
.name = "stmp3xxx-pxp",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.dma_mask = &common_dmamask,
|
||||
.coherent_dma_mask = DMA_BIT_MASK(32),
|
||||
},
|
||||
.num_resources = ARRAY_SIZE(pxp_resource),
|
||||
.resource = pxp_resource,
|
||||
};
|
||||
|
||||
static struct resource i2c_resources[] = {
|
||||
{
|
||||
.flags = IORESOURCE_IRQ,
|
||||
.start = IRQ_I2C_ERROR,
|
||||
.end = IRQ_I2C_ERROR,
|
||||
}, {
|
||||
.flags = IORESOURCE_MEM,
|
||||
.start = REGS_I2C_PHYS,
|
||||
.end = REGS_I2C_PHYS + REGS_I2C_SIZE,
|
||||
}, {
|
||||
.flags = IORESOURCE_DMA,
|
||||
.start = STMP3XXX_DMA(3, STMP3XXX_BUS_APBX),
|
||||
.end = STMP3XXX_DMA(3, STMP3XXX_BUS_APBX),
|
||||
},
|
||||
};
|
||||
|
||||
struct platform_device stmp378x_i2c = {
|
||||
.name = "i2c_stmp3xxx",
|
||||
.id = 0,
|
||||
.dev = {
|
||||
.dma_mask = &common_dmamask,
|
||||
.coherent_dma_mask = DMA_BIT_MASK(32),
|
||||
},
|
||||
.resource = i2c_resources,
|
||||
.num_resources = ARRAY_SIZE(i2c_resources),
|
||||
};
|
||||
|
||||
void __init stmp378x_map_io(void)
|
||||
{
|
||||
iotable_init(stmp378x_io_desc, ARRAY_SIZE(stmp378x_io_desc));
|
||||
|
||||
@@ -21,4 +21,5 @@
|
||||
void stmp378x_map_io(void);
|
||||
void stmp378x_init_irq(void);
|
||||
|
||||
extern struct platform_device stmp378x_pxp, stmp378x_i2c;
|
||||
#endif /* __MACH_STMP378X_COMMON_H */
|
||||
|
||||
@@ -17,7 +17,12 @@
|
||||
*/
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/spi/spi.h>
|
||||
|
||||
#include <asm/setup.h>
|
||||
#include <asm/mach-types.h>
|
||||
@@ -25,12 +30,39 @@
|
||||
|
||||
#include <mach/pins.h>
|
||||
#include <mach/pinmux.h>
|
||||
#include <mach/platform.h>
|
||||
#include <mach/stmp3xxx.h>
|
||||
#include <mach/mmc.h>
|
||||
#include <mach/gpmi.h>
|
||||
|
||||
#include "stmp378x.h"
|
||||
|
||||
static struct platform_device *devices[] = {
|
||||
&stmp3xxx_dbguart,
|
||||
&stmp3xxx_appuart,
|
||||
&stmp3xxx_watchdog,
|
||||
&stmp3xxx_touchscreen,
|
||||
&stmp3xxx_rtc,
|
||||
&stmp3xxx_keyboard,
|
||||
&stmp3xxx_framebuffer,
|
||||
&stmp3xxx_backlight,
|
||||
&stmp3xxx_rotdec,
|
||||
&stmp3xxx_persistent,
|
||||
&stmp3xxx_dcp_bootstream,
|
||||
&stmp3xxx_dcp,
|
||||
&stmp3xxx_battery,
|
||||
&stmp378x_pxp,
|
||||
&stmp378x_i2c,
|
||||
};
|
||||
|
||||
static struct pin_desc i2c_pins_desc[] = {
|
||||
{ PINID_I2C_SCL, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
|
||||
{ PINID_I2C_SDA, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
|
||||
};
|
||||
|
||||
static struct pin_group i2c_pins = {
|
||||
.pins = i2c_pins_desc,
|
||||
.nr_pins = ARRAY_SIZE(i2c_pins_desc),
|
||||
};
|
||||
|
||||
static struct pin_desc dbguart_pins_0[] = {
|
||||
@@ -56,6 +88,215 @@ static int dbguart_pins_control(int id, int request)
|
||||
return r;
|
||||
}
|
||||
|
||||
static struct pin_desc appuart_pins_0[] = {
|
||||
{ PINID_AUART1_CTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
|
||||
{ PINID_AUART1_RTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
|
||||
{ PINID_AUART1_RX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
|
||||
{ PINID_AUART1_TX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
|
||||
};
|
||||
|
||||
static struct pin_desc appuart_pins_1[] = {
|
||||
#if 0 /* enable these when second appuart will be connected */
|
||||
{ PINID_AUART2_CTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
|
||||
{ PINID_AUART2_RTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
|
||||
{ PINID_AUART2_RX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
|
||||
{ PINID_AUART2_TX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
|
||||
#endif
|
||||
};
|
||||
|
||||
static struct pin_desc mmc_pins_desc[] = {
|
||||
{ PINID_SSP1_DATA0, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
|
||||
{ PINID_SSP1_DATA1, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
|
||||
{ PINID_SSP1_DATA2, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
|
||||
{ PINID_SSP1_DATA3, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
|
||||
{ PINID_SSP1_CMD, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
|
||||
{ PINID_SSP1_SCK, PIN_FUN1, PIN_8MA, PIN_3_3V, 0 },
|
||||
{ PINID_SSP1_DETECT, PIN_FUN1, PIN_8MA, PIN_3_3V, 0 },
|
||||
};
|
||||
|
||||
static struct pin_group mmc_pins = {
|
||||
.pins = mmc_pins_desc,
|
||||
.nr_pins = ARRAY_SIZE(mmc_pins_desc),
|
||||
};
|
||||
|
||||
static int stmp3xxxmmc_get_wp(void)
|
||||
{
|
||||
return gpio_get_value(PINID_PWM4);
|
||||
}
|
||||
|
||||
static int stmp3xxxmmc_hw_init_ssp1(void)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = stmp3xxx_request_pin_group(&mmc_pins, "mmc");
|
||||
if (ret)
|
||||
goto out;
|
||||
|
||||
/* Configure write protect GPIO pin */
|
||||
ret = gpio_request(PINID_PWM4, "mmc wp");
|
||||
if (ret)
|
||||
goto out_wp;
|
||||
|
||||
gpio_direction_input(PINID_PWM4);
|
||||
|
||||
/* Configure POWER pin as gpio to drive power to MMC slot */
|
||||
ret = gpio_request(PINID_PWM3, "mmc power");
|
||||
if (ret)
|
||||
goto out_power;
|
||||
|
||||
gpio_direction_output(PINID_PWM3, 0);
|
||||
mdelay(100);
|
||||
|
||||
return 0;
|
||||
|
||||
out_power:
|
||||
gpio_free(PINID_PWM4);
|
||||
out_wp:
|
||||
stmp3xxx_release_pin_group(&mmc_pins, "mmc");
|
||||
out:
|
||||
return ret;
|
||||
}
|
||||
|
||||
static void stmp3xxxmmc_hw_release_ssp1(void)
|
||||
{
|
||||
gpio_free(PINID_PWM3);
|
||||
gpio_free(PINID_PWM4);
|
||||
stmp3xxx_release_pin_group(&mmc_pins, "mmc");
|
||||
}
|
||||
|
||||
static void stmp3xxxmmc_cmd_pullup_ssp1(int enable)
|
||||
{
|
||||
stmp3xxx_pin_pullup(PINID_SSP1_CMD, enable, "mmc");
|
||||
}
|
||||
|
||||
static unsigned long
|
||||
stmp3xxxmmc_setclock_ssp1(void __iomem *base, unsigned long hz)
|
||||
{
|
||||
struct clk *ssp, *parent;
|
||||
char *p;
|
||||
long r;
|
||||
|
||||
ssp = clk_get(NULL, "ssp");
|
||||
|
||||
/* using SSP1, no timeout, clock rate 1 */
|
||||
writel(BF(2, SSP_TIMING_CLOCK_DIVIDE) |
|
||||
BF(0xFFFF, SSP_TIMING_TIMEOUT),
|
||||
base + HW_SSP_TIMING);
|
||||
|
||||
p = (hz > 1000000) ? "io" : "osc_24M";
|
||||
parent = clk_get(NULL, p);
|
||||
clk_set_parent(ssp, parent);
|
||||
r = clk_set_rate(ssp, 2 * hz / 1000);
|
||||
clk_put(parent);
|
||||
clk_put(ssp);
|
||||
|
||||
return hz;
|
||||
}
|
||||
|
||||
static struct stmp3xxxmmc_platform_data mmc_data = {
|
||||
.hw_init = stmp3xxxmmc_hw_init_ssp1,
|
||||
.hw_release = stmp3xxxmmc_hw_release_ssp1,
|
||||
.get_wp = stmp3xxxmmc_get_wp,
|
||||
.cmd_pullup = stmp3xxxmmc_cmd_pullup_ssp1,
|
||||
.setclock = stmp3xxxmmc_setclock_ssp1,
|
||||
};
|
||||
|
||||
|
||||
static struct pin_group appuart_pins[] = {
|
||||
[0] = {
|
||||
.pins = appuart_pins_0,
|
||||
.nr_pins = ARRAY_SIZE(appuart_pins_0),
|
||||
},
|
||||
[1] = {
|
||||
.pins = appuart_pins_1,
|
||||
.nr_pins = ARRAY_SIZE(appuart_pins_1),
|
||||
},
|
||||
};
|
||||
|
||||
static struct pin_desc ssp1_pins_desc[] = {
|
||||
{ PINID_SSP1_SCK, PIN_FUN1, PIN_8MA, PIN_3_3V, 0, },
|
||||
{ PINID_SSP1_CMD, PIN_FUN1, PIN_4MA, PIN_3_3V, 0, },
|
||||
{ PINID_SSP1_DATA0, PIN_FUN1, PIN_4MA, PIN_3_3V, 0, },
|
||||
{ PINID_SSP1_DATA3, PIN_FUN1, PIN_4MA, PIN_3_3V, 0, },
|
||||
};
|
||||
|
||||
static struct pin_desc ssp2_pins_desc[] = {
|
||||
{ PINID_GPMI_WRN, PIN_FUN3, PIN_8MA, PIN_3_3V, 0, },
|
||||
{ PINID_GPMI_RDY1, PIN_FUN3, PIN_4MA, PIN_3_3V, 0, },
|
||||
{ PINID_GPMI_D00, PIN_FUN3, PIN_4MA, PIN_3_3V, 0, },
|
||||
{ PINID_GPMI_D03, PIN_FUN3, PIN_4MA, PIN_3_3V, 0, },
|
||||
};
|
||||
|
||||
static struct pin_group ssp1_pins = {
|
||||
.pins = ssp1_pins_desc,
|
||||
.nr_pins = ARRAY_SIZE(ssp1_pins_desc),
|
||||
};
|
||||
|
||||
static struct pin_group ssp2_pins = {
|
||||
.pins = ssp1_pins_desc,
|
||||
.nr_pins = ARRAY_SIZE(ssp2_pins_desc),
|
||||
};
|
||||
|
||||
static struct pin_desc gpmi_pins_desc[] = {
|
||||
{ PINID_GPMI_CE0N, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
|
||||
{ PINID_GPMI_CE1N, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
|
||||
{ PINID_GMPI_CE2N, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
|
||||
{ PINID_GPMI_CLE, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
|
||||
{ PINID_GPMI_ALE, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
|
||||
{ PINID_GPMI_WPN, PIN_FUN1, PIN_12MA, PIN_3_3V, 0 },
|
||||
{ PINID_GPMI_RDY1, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
|
||||
{ PINID_GPMI_D00, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
|
||||
{ PINID_GPMI_D01, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
|
||||
{ PINID_GPMI_D02, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
|
||||
{ PINID_GPMI_D03, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
|
||||
{ PINID_GPMI_D04, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
|
||||
{ PINID_GPMI_D05, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
|
||||
{ PINID_GPMI_D06, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
|
||||
{ PINID_GPMI_D07, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
|
||||
{ PINID_GPMI_RDY0, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
|
||||
{ PINID_GPMI_RDY2, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
|
||||
{ PINID_GPMI_RDY3, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
|
||||
{ PINID_GPMI_WRN, PIN_FUN1, PIN_12MA, PIN_3_3V, 0 },
|
||||
{ PINID_GPMI_RDN, PIN_FUN1, PIN_12MA, PIN_3_3V, 0 },
|
||||
};
|
||||
|
||||
static struct pin_group gpmi_pins = {
|
||||
.pins = gpmi_pins_desc,
|
||||
.nr_pins = ARRAY_SIZE(gpmi_pins_desc),
|
||||
};
|
||||
|
||||
static struct mtd_partition gpmi_partitions[] = {
|
||||
[0] = {
|
||||
.name = "boot",
|
||||
.size = 10 * SZ_1M,
|
||||
.offset = 0,
|
||||
},
|
||||
[1] = {
|
||||
.name = "data",
|
||||
.size = MTDPART_SIZ_FULL,
|
||||
.offset = MTDPART_OFS_APPEND,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpmi_platform_data gpmi_data = {
|
||||
.pins = &gpmi_pins,
|
||||
.nr_parts = ARRAY_SIZE(gpmi_partitions),
|
||||
.parts = gpmi_partitions,
|
||||
.part_types = { "cmdline", NULL },
|
||||
};
|
||||
|
||||
static struct spi_board_info spi_board_info[] __initdata = {
|
||||
#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
|
||||
{
|
||||
.modalias = "enc28j60",
|
||||
.max_speed_hz = 6 * 1000 * 1000,
|
||||
.bus_num = 1,
|
||||
.chip_select = 0,
|
||||
.platform_data = NULL,
|
||||
},
|
||||
#endif
|
||||
};
|
||||
|
||||
static void __init stmp378x_devb_init(void)
|
||||
{
|
||||
stmp3xxx_pinmux_init(NR_REAL_IRQS);
|
||||
@@ -64,9 +305,22 @@ static void __init stmp378x_devb_init(void)
|
||||
stmp3xxx_init();
|
||||
|
||||
stmp3xxx_dbguart.dev.platform_data = dbguart_pins_control;
|
||||
stmp3xxx_appuart.dev.platform_data = appuart_pins;
|
||||
stmp3xxx_mmc.dev.platform_data = &mmc_data;
|
||||
stmp3xxx_gpmi.dev.platform_data = &gpmi_data;
|
||||
stmp3xxx_spi1.dev.platform_data = &ssp1_pins;
|
||||
stmp3xxx_spi2.dev.platform_data = &ssp2_pins;
|
||||
stmp378x_i2c.dev.platform_data = &i2c_pins;
|
||||
|
||||
/* register spi devices */
|
||||
spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
|
||||
|
||||
/* add board's devices */
|
||||
platform_add_devices(devices, ARRAY_SIZE(devices));
|
||||
|
||||
/* add devices selected by command line ssp1= and ssp2= options */
|
||||
stmp3xxx_ssp1_device_register();
|
||||
stmp3xxx_ssp2_device_register();
|
||||
}
|
||||
|
||||
MACHINE_START(STMP378X, "STMP378X")
|
||||
|
||||
Reference in New Issue
Block a user