Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (22 commits)
  pcmcia: synclink_cs: fix information leak to userland
  pcmcia: don't call flush_scheduled_work() spuriously
  serial_cs: drop spurious flush_scheduled_work() call
  pcmcia/yenta: guide users in case of problems with O2-bridges
  pcmcia: fix unused function compile warning
  pcmcia: vrc4173_cardu: Fix error path for pci_release_regions and pci_disable_device
  pcmcia: add a few debug statements
  pcmcia: remove obsolete and wrong comments
  pcmcia: avoid messages on module (un)loading
  pcmcia: move driver name to struct pcmcia_driver
  pcmcia: remove the "Finally, report what we've done" message
  pcmcia: use autoconfiguration feature for ioports and iomem
  pcmcia: introduce autoconfiguration feature
  pcmcia: Documentation update
  pcmcia: convert pcmcia_request_configuration to pcmcia_enable_device
  pcmcia: move config_{base,index,regs} to struct pcmcia_device
  pcmcia: simplify IntType
  pcmcia: simplify Status, ExtStatus register access
  pcmcia: remove Pin, Copy configuration register access
  pcmcia: move Vpp setup to struct pcmcia_device
  ...

drivers/parport/parport_cs.c

@@ -48,7 +48,6 @@
 #include <linux/parport.h>
 #include <linux/parport_pc.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
 #include <pcmcia/cisreg.h>
@@ -81,14 +80,6 @@ static void parport_detach(struct pcmcia_device *p_dev);
 static int parport_config(struct pcmcia_device *link);
 static void parport_cs_release(struct pcmcia_device *);
 
-/*======================================================================
-
-    parport_attach() creates an "instance" of the driver, allocating
-    local data structures for one device.  The device is registered
-    with Card Services.
-
-======================================================================*/
-
 static int parport_probe(struct pcmcia_device *link)
 {
     parport_info_t *info;
@@ -101,23 +92,11 @@ static int parport_probe(struct pcmcia_device *link)
     link->priv = info;
     info->p_dev = link;
 
-    link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
-    link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
-    link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.IntType = INT_MEMORY_AND_IO;
+    link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
 
     return parport_config(link);
 } /* parport_attach */
 
-/*======================================================================
-
-    This deletes a driver "instance".  The device is de-registered
-    with Card Services.  If it has been released, all local data
-    structures are freed.  Otherwise, the structures will be freed
-    when the device is released.
-
-======================================================================*/
-
 static void parport_detach(struct pcmcia_device *link)
 {
     dev_dbg(&link->dev, "parport_detach\n");
@@ -127,36 +106,14 @@ static void parport_detach(struct pcmcia_device *link)
     kfree(link->priv);
 } /* parport_detach */
 
-/*======================================================================
-
-    parport_config() is scheduled to run after a CARD_INSERTION event
-    is received, to configure the PCMCIA socket, and to make the
-    parport device available to the system.
-
-======================================================================*/
-
-static int parport_config_check(struct pcmcia_device *p_dev,
-				cistpl_cftable_entry_t *cfg,
-				cistpl_cftable_entry_t *dflt,
-				unsigned int vcc,
-				void *priv_data)
+static int parport_config_check(struct pcmcia_device *p_dev, void *priv_data)
 {
-	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
-		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
-		if (epp_mode)
-			p_dev->conf.ConfigIndex |= FORCE_EPP_MODE;
-		p_dev->resource[0]->start = io->win[0].base;
-		p_dev->resource[0]->end = io->win[0].len;
-		if (io->nwin == 2) {
-			p_dev->resource[1]->start = io->win[1].base;
-			p_dev->resource[1]->end = io->win[1].len;
-		}
-		if (pcmcia_request_io(p_dev) != 0)
-			return -ENODEV;
-		return 0;
-	}
-	return -ENODEV;
+	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+	p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH;
+	p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
+
+	return pcmcia_request_io(p_dev);
 }
 
 static int parport_config(struct pcmcia_device *link)
@@ -167,13 +124,16 @@ static int parport_config(struct pcmcia_device *link)
 
     dev_dbg(&link->dev, "parport_config\n");
 
+    if (epp_mode)
+	    link->config_index |= FORCE_EPP_MODE;
+
     ret = pcmcia_loop_config(link, parport_config_check, NULL);
     if (ret)
 	    goto failed;
 
     if (!link->irq)
 	    goto failed;
-    ret = pcmcia_request_configuration(link, &link->conf);
+    ret = pcmcia_enable_device(link);
     if (ret)
 	    goto failed;
 
@@ -202,14 +162,6 @@ failed:
     return -ENODEV;
 } /* parport_config */
 
-/*======================================================================
-
-    After a card is removed, parport_cs_release() will unregister the
-    device, and release the PCMCIA configuration.  If the device is
-    still open, this will be postponed until it is closed.
-    
-======================================================================*/
-
 static void parport_cs_release(struct pcmcia_device *link)
 {
 	parport_info_t *info = link->priv;
@@ -236,9 +188,7 @@ MODULE_DEVICE_TABLE(pcmcia, parport_ids);
 
 static struct pcmcia_driver parport_cs_driver = {
 	.owner		= THIS_MODULE,
-	.drv		= {
-		.name	= "parport_cs",
-	},
+	.name		= "parport_cs",
 	.probe		= parport_probe,
 	.remove		= parport_detach,
 	.id_table	= parport_ids,