Merge branches 'clk-imx6-video-parent', 'clk-qcom-sdm845-criticals', 'clk-renesas', 'clk-stratix10-fixes' and 'clk-atmel-i2s' into clk-next

* clk-imx6-video-parent:
  :  - Fix i.MX6QDL video clk parent
  clk: imx6: fix video_27m parent for IMX6QDL_CLK_CKO1_SEL

* clk-qcom-sdm845-criticals:
  :  - critical clk markings for qcom SDM845
  clk: qcom: Enable clocks which needs to be always on for SDM845

* clk-renesas:
  clk: renesas: Renesas R9A06G032 clock driver
  dt-bindings: clock: renesas,r9a06g032-sysctrl: documentation
  dt-bindings: clock: Add the r9a06g032-sysctrl.h file
  clk: renesas: r8a7795: Add CCREE clock
  clk: renesas: r8a7795: Add CR clock

* clk-stratix10-fixes:
  :  - Fix Stratix10 mpu_free_clk and sdmmc_free_clk parents
  clk: socfpga: stratix10: fix the sdmmc_free_clk mux
  clk: socfpga: stratix10: fix the parents of mpu_free_clk

* clk-atmel-i2s:
  :  - Atmel at91 I2S audio clk support
  clk: at91: add I2S clock mux driver
  dt-bindings: clk: at91: add an I2S mux clock

Documentation/devicetree/bindings/clock/at91-clock.txt

@@ -91,6 +91,9 @@ Required properties:
 		at91 audio pll output on AUDIOPLLCLK that feeds the PMC
 		and can be used by peripheral clock or generic clock
 
+	"atmel,sama5d2-clk-i2s-mux" (under pmc node):
+		at91 I2S clock source selection
+
 Required properties for SCKC node:
 - reg : defines the IO memory reserved for the SCKC.
 - #size-cells : shall be 0 (reg is used to encode clk id).
@@ -507,3 +510,35 @@ For example:
 			atmel,clk-output-range = <0 83000000>;
 		};
 	};
+
+Required properties for I2S mux clocks:
+- #size-cells : shall be 0 (reg is used to encode I2S bus id).
+- #address-cells : shall be 1 (reg is used to encode I2S bus id).
+- name: device tree node describing a specific mux clock.
+	* #clock-cells : from common clock binding; shall be set to 0.
+	* clocks : shall be the mux clock parent phandles; shall be 2 phandles:
+	  peripheral and generated clock; the first phandle shall belong to the
+	  peripheral clock and the second one shall belong to the generated
+	  clock; "clock-indices" property can be user to specify
+	  the correct order.
+	* reg: I2S bus id of the corresponding mux clock.
+	  e.g. reg = <0>; for i2s0, reg = <1>; for i2s1
+
+For example:
+	i2s_clkmux {
+		compatible = "atmel,sama5d2-clk-i2s-mux";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2s0muxck: i2s0_muxclk {
+			clocks = <&i2s0_clk>, <&i2s0_gclk>;
+			#clock-cells = <0>;
+			reg = <0>;
+		};
+
+		i2s1muxck: i2s1_muxclk {
+			clocks = <&i2s1_clk>, <&i2s1_gclk>;
+			#clock-cells = <0>;
+			reg = <1>;
+		};
+	};

Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.txt

@@ -0,0 +1,43 @@
+* Renesas R9A06G032 SYSCTRL
+
+Required Properties:
+
+  - compatible: Must be:
+    - "renesas,r9a06g032-sysctrl"
+  - reg: Base address and length of the SYSCTRL IO block.
+  - #clock-cells: Must be 1
+  - clocks: References to the parent clocks:
+	- external 40mhz crystal.
+	- external (optional) 32.768khz
+	- external (optional) jtag input
+	- external (optional) RGMII_REFCLK
+  - clock-names: Must be:
+        clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext";
+
+Examples
+--------
+
+  - SYSCTRL node:
+
+	sysctrl: system-controller@4000c000 {
+		compatible = "renesas,r9a06g032-sysctrl";
+		reg = <0x4000c000 0x1000>;
+		#clock-cells = <1>;
+
+		clocks = <&ext_mclk>, <&ext_rtc_clk>,
+				<&ext_jtag_clk>, <&ext_rgmii_ref>;
+		clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext";
+	};
+
+  - Other nodes can use the clocks provided by SYSCTRL as in:
+
+	#include <dt-bindings/clock/r9a06g032-sysctrl.h>
+	uart0: serial@40060000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x40060000 0x400>;
+		interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clocks = <&sysctrl R9A06G032_CLK_UART0>;
+		clock-names = "baudclk";
+	};